HP dv6 - no sound when using external mic

Hi everyone
when plugging in an external device to the external mic jack, I get no sound from the speakers/ or headphones as I am recording!
It does still record though.
How can I get sound through my speakers as I am recording?
Also to get it to record in stereo, I have to plug into the external mic jack only halfway. if I plug in all the way I get only mono output!
Any suggestions on these issues?
thanks!

Hello papeek,
What is your product number and operating system?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up ever

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

Using external mic (Audio Technica Pro 70) on MacBook Pro (2012)

Hello, I am fairly new to the MacBook and not sure of many of its features. I need to use an external mic Audio Technica Pro 70 on my MacBook. I read in some forums that I just plug it into the headphone jack and change the settings via system preferences. When I tried to do this by going to Sound>Input I only see an option for the internal mic. Is there something I'm not getting or missing?
Operating system: OS X Yosemite 10.10
Thank you for your time.

Hey AddiXtioN,
Welcome to Apple Support Communities.
It sounds like your external mic isn’t recognized when plugged into your MacBook Pro. The article linked below provides troubleshooting tips and details about the process of connecting an external microphone to your Mac.
OS X Yosemite: Adjust your computer’s sound input settings
Take care,
-Jason

My Apple TV lacking sound when using iplayer etc

Can get sound when using Airplay from some web sources but not others. Any reasons why?
Nick

Hmm, rebooted the mac and now works! had only tried rebooting Apple Tv before. strange, as sound was fine on mac when not using airplay
thanks all
Nick

How do I stop system sounds when using AirPlay on my MacBook Pro?

Hi all,
Probably a quick question, but I'm fairly new to Macs. I've a Macbook Pro 13 Late 2011 and now I've got an Apple TV, I use AirPlay. But how do I stop system sounds when using AirPlay?
Many thanks in advance, Jon.

Open AirPort Utility located in HD > Applications > Utilities
From the AirPort Utility menu bar click AirPort Utility > Preferences
Deselect: Monitor AirPort base stations for problems

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen. I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it). The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

How do I have my phone Make sound when using "Find my phone" app

How do I have my iPhone make sound when using "find my. Phon" app?

You can have the app send you an email when it is found, and you can set your email tone under settings-> sounds

ORA-15072 when using external redenacy?

Hello -
I am getting ORA-15072 (command required at least one failure groups) when using external redundancy. I am using asmlib on Linux, and I have a feeling that it it a multipathing issue. Here are the output from some of my commands:
[root@ctolinuxpoc01 init.d]# ./oracleasm listdisks
VOL1
VOL10
VOL11
VOL12
VOL2
VOL3
VOL4
VOL5
VOL6
VOL7
VOL8
VOL9
SQL> select name, path, state from v$asm_disk;
NAME
PATH
STATE
ORCL:VOL1
NORMAL
ORCL:VOL2
NORMAL
NAME
PATH
STATE
ORCL:VOL3
NORMAL
ORCL:VOL4
NAME
PATH
STATE
NORMAL
Why would I be getting ORA-15072 with external redundancy (using asmlib)?
Thanks in andvance!
Mike

The header status is showing as "unknown"... Could this be part of the issue?
Thanks,
Mike

When using external speakers, they won't unmute

I am using a U530 Touch with Realtek HD Audio driver version 6.0.1.7535 and Windows 10 build 10240. When using external speakers, everything works fine, except when I mute speakers they will not unmute without unplugging the 3.5 mm speaker jack and plugging it back in to the unit. Using the laptop's internal speakers does not produce the same proplem (mute/unmute works fine). I have looked at every setting and find nothing, nor have I seen this problem reported in the forums. HELP!!!

Rattle Snake wrote:
Firstly how do I know if this is a 1st or 2nd generation shuffle? Bought in May at Palo Alto Store but there doesn't seem to be anything on the packaging to tell me.
1st Gen shuffle was white, plastic, and shaped like a chewing gum package.
2nd Gen shuffle is aluminum, with a spring clip on the back and comes in silve and assorted colors...
When the shuffle is connected to the external speakers(bought at the same
time) it only plays about 5 songs and then stops.
Does it play through the earphones after this happens? Does it still have power or is the battery depleted after it stops playing?
What Brand & model are the speakers?

No sound for voiceover using external mic

Im trying to do a voiceover in timeline of FCP with my handheld mic. But i get no sound. i only get sound from built in mic. My handheld mic is plugged into back of Mac using a mini plug. I changed system (Audio) settings to external mic, but still no sound.

Hello Michael,
You said:
Michael Grenadier wrote:
When you open the audio preferences in system preferences and go to the input tab and choose the external mic, do you see the level's moving. And are you sure you're plugged into a mic input. Not sure what kind of mac has an mic input. There is a digital audio input on some macs, Not the same thing.
I'm puzzled by this, as what possible use can a digital audio input have, if not for jobs like this?
I'm trying to use a mini jack mic, but I can't even get this to show any activity in the system audio preference pane. It shows under 'Line in" an 'Audio line-in port', but it shows that (whatever that is) whether the mic is plugged in or not. I suspect it hasn't recognised it.
I'm using a 24" iMac running Snow Leopard, and working in iMovie 09.
Have you any idea what I need to do? I don't really want to work outside the iMovie environment.
Thanks.

How to blank laptop screen when using external monitor/

Hi there
I need some help with figuring out how to configure my xorg.conf for my Arch Linux 64 bit installation on a HP Pavilion dv 5000 laptop so that I can automatically blank my laptop screen when using an external monitor. I have Arch Linux installed along with Ubuntu Feisty. In Ubuntu my external monitor (Viewsonic 1912WB) was not detected at the time of installation but with the native 1280X800 resolution that is good for the laptop takes effect for the external monitor automatically when the external monitor is plugged in. The laptop monitor goes blank when the external monitor is plugged in.
In my Arch Linux installation I have not been able to configure a dual head configuration using the ATI Radeon drivers (fglrx). I have the native 1280X800 resolution set up for the laptop monitor and this resolution takes effect for the external monitor also. However the laptop monitor also continues to function when the external monitor is plugged in. I would like to blank the laptop monitor when using the external monitor.
I am attaching my Arch Linux xorg.conf and the Ubuntu xorg.conf below. Thanks for anyone who can help, I am having a lot of difficulty in figuring out how to set up xorg.conf among all the things that I have had to learn so far in Linux and I am a relative newcomer to the whole thing. I have tried to compare the two xorg.conf files and edit my Arch xorg.conf in accordance with the Ubuntu one but it did not work and I keep getting errors!
I am using XFCE as my Desktop environment.
Arch Linux xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option    "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option    "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option    "XkbRules" "xorg"
Option    "XkbModel" "pc104"
Option    "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option    "Protocol" "Auto" # Auto detect
Option    "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option    "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 30.0 - 62.0
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option    "VendorName" "ATI Proprietary Driver"
Option    "ModelName" "Generic Autodetecting Monitor"
Option    "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "* Generic VESA compatible"
Driver "vesa"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Ubuntu xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection

Xrandr 1.2 provides means for this. But today the only supported configuration is xorg-server-1.3 + xf86-video-intel-2.0. So for Radeon you'll have to wait for drivers that support Randr 1.2.
On my laptop (Thinkpad x60s) that would be:
xrandr --output VGA --auto
xrandr --output LVDS --off

Do not use the Megaphone effect when using external amp and speakers

Hi guys,
I just wanted to let you know that I damaged my Yamaha NS10 speakers while I was testing the effect section on garageband with an external mic through my studio amp and the NS10 studio monitors. When I switched to the Megaphone effect to test it I received such a high frequency signal that it killed my NS10 tweeters. It is very frustrating and I had never really any issues in the past with my monitors.
I am just posting this topic here to warn you guys, just in case you are trying the same thing. It cost me 250 dollar to replace the tweeters so you better test the effect section of garageband on a very low level or even use your old headphones before you plug your mac to an external amp and speaker set up.
Good luck,
Martin

Sorry to hear about those blown tweeters.
If it'll help, once you establish a microphone setup using the dropdowns in the lower right-hand corner of the browse window, there are three monitor options: Off, On, & On (no feedback protection).
Knowing this, the latter may have been the unbeknownst destructive culprit.

Cant hear monitor when using usb mic

hey all, question. when my usb mic is plugged in and armed for recording, i cant hear the previous track to keep my timing. the built in mic isnt that great so i like to use my external. its like when its plugged in it overrides all monitor functions. i just wanna be able to record a track while the previous one plays back. thanks guys for the help with an obvious newby.

Make sure you have the correct output selected in GB Prefs>Audio/MIDI. I assume you're using your computer speakers? If so select Built-In Output. Also make sure the recorded Track isn't muted and that the volume is up.

GarageBand not using external mic?

I have a MacBook Pro and a Blue Snowball mic. Things were dandy until I was fiddling with some settings --- I think in the Audio MIDI Setup --- and now it seems that GarageBand only uses the MBP's internal mic.
In System Preferences -> Sound it shows the mic, and the input level bounces around as before when it's selected, so it seems that the system recognizes it.
However, when in GarageBand I try to record audio, it seems to ignore the Blue mic (and I get an annoying after-hiss; there's a fan in the background right now).
I've been playing around, but have been wasting my time thus far.

Because the more Experienced are looking for more complicated issues B-)>
Glad to hear it was a simple fix, enjoy --Hang

Using external mic on the N95

I've just bought an N95 and have been trying to connect an external (Shure) mic with a 3.5mm connection. When I insert it it is detected by the phone, but the only three options are Headphones, TV Out and Music Stand. Whichever I select the phone reverts to using the internal mic.
I'd like to use it to record sessions with my band, and don't see why this shouldn't be possible - anyone got any suggestions??
Thanks in advance!
Rob

Hey Guys, here it is.
We've done the external mic succesfully both as a wireless solution and as wired. Using a bluetooth mic will work, but beware that there are audio conflicts between bluetooth and WiFi on the N95. So if using bluetooth, use operator connection only.
If you want to use a wired external mic, buy a 4 pole 3.5mm jack, not the standard 3 pole headphone jack. Wire the outer two connections too your mono mic, and leave the other two unconnected. That's all there is to it. Your microphone may require a power source depending on the model.
The Reuters toolkit shows a Sony ECM-MS907 mic. This is stereo and not needed as the N95 can only accomodate a mono input.
We also made an adapter to allow a wireless FM signal to feed audio via the internal FM receiver. This is great for bands or lectures. use the uadio from the mixing console and walk around the room with the N95, still getting the same clean signal.
And now a shameless plug. Visit comvu.com for free webcasting software. This allows you to broadcast from the N95 to the web LIVE and have your friends watch it live as well from a PC or their phone.
Enjoy the Christmas present.

HP dv6 - no sound when using external mic

Similar Messages

Maybe you are looking for