HP DV6 , Not Charging

I have HP DV6 pavillion series laptop, 1211ax,
it is now 5 years old, Recently it started showing a problem, when I plug in the charging cord into the socket of laptop ( while laptop is off) the LED turns on but after few seconds it turns off, it keep on turnng on and off while the laptop is off.
when I turn on my laptop the LED gets off, when the computer starts, is shows no charging, there is "no error". just it does not charge. I recently changed the battry with new one in order to solve this problem. but the problem is still there.
I have also checked the charger its voltage is also ok ( 19, and 13 volts).
I am working on windows vista, with 3gb RAM, AMD Processor,
So kindly tell me how can I Solve this problem ????

Here is a link to the Service Manual, which you may need:
Manual
The part you likely need is Item 12 on Page 19:
(12) Power connector cable 533465-001
Here is the part for sale on eBay India:
http://geb.ebay.in/g/ImportHubViewItem?itemid=251299431838&NEW-HP-Pavilion-DV6-DV6T-DV6Z-DC-Power-Ja...

Similar Messages

Dv6 battery not charging

My laptop only works through AC power. The laptop works off of the battery if the battery is charged, but the laptop does not charge the battery. If the battery is plugged in and I plug in the charger the charging light does not come on and the laptop does not power on. On the other hand, when I turn on the laptop and then insert the battery the laptop shows that the battery is charging but the battery does not actually charge up. I thought this was due to a bad battery since I have had this laptop for a couple of years so I bought a new battery but I have the same exact problem. I have tried a different charger but I also have the same problem.
Laptop specs:
HP Pavilion dv6-7043
Windows 7 64 bit
Battery:
671731-001
6CLNE06AX2G136
Any help would be appreciated

Hi amkazant,
Welcome to the HP Community! I understand your frustration with the battery issue. It could be hardware related with the battery connection on the laptop not reading the battery. It could also be software related. The Microsoft ACPI-Compliant Control Method Battery is basically the driver that communicates between the computer and the battery. There is a chance that it is corrupted causing it not to read the battery. Follow the steps below and let me know how it goes.
Step 1. Go to Device Manager
Step 2. Select Batteries
Step 3. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
Step 4. Click Uninstall
Step 5. At the prompt put a check in the box to remove the current driver
Step 6. Shutdown the computer
Step 7: Remove the battery for minute and then put it back in
Step 8: Turn the computer back with the power cord as well.
When the computer comes back up it should automatically find the driver and detect the battery.
Step 9. Go to Device Manager
Step 10. Select Batteries
Step 11. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
Step 12. Click "Search automatically for updated driver software"
Do the same thing with Microsoft ACPI-Compliant Embedded Controller if it is still not reading the battery.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Pavilion dv6 charging not charging

My laptop is doing this thing where it charges then doesnt. it will flash the, charging, not charging , to just not charging at all. and it does this until my computer just dies. its been going inbetween doing this, and working perfectly fine. pretty positive my computer is filthy also. any ideas as to whats happening?

Hi
Please try the following link given below might help you.
Using and Testing the AC Power Adapter
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Hp dv6 battery plugging,charging but not charging

Recently I replaced my dv6t 3100 CTO laptop battery, When I was at the the store I checked the battery by installed it to the laptop. I noticed that it was chrging 0% to 6%. I satisfied with the battery and when I was come home I discharged the battery and started to charge the laptop from 0%. After 3 hours I checked the battery status and discover that it remain 6%. After 7 hours the the result is the same. But when i click the battery icon it says 6% available(plugged in, charging).
But it is not charging.
Please help me soon as possible.

Hello @kelum17 ,
Thanks for posting on the HP Forums! It's a pleasure speaking with you again
I understand the battery is not charging. I can definitely help with this! Please check out this thread where I provided troubleshooting steps which can resolve the issue: problem while charging
Here are the main steps I want you to do:
Disconnect the AC adapter from the notebook.
Shut down the notebook.
Remove the battery from the notebook.
Reconnect the AC adapter from the notebook.
Turn on the computer and boot right into Windows.
Go into Device Manager and go to "Batteries"
Right-click on all ACPI Compliant Control Method Battery entires, and select "Uninstall".
Shut down the notebook again.
Disconnect the AC adapter from the notebook again.
Insert the battery into the notebook.
Connect AC to the notebook and turn on the notebook.
Please let me know your results. Thanks!
Mario
I worked on behalf of HP.

Is there a settings in Win7/HP feature that the battery does not charge until it is under 95%

I just purchased a HP Pavilion dv6-7043cl laptop and have noticed that the battery does not charge unless it is below 95%. I am very concercerned because I had a different laptop from a different manufacturer where I had battery issues. That manufacturer was not helpful and I will never buy from them again.
I have heard good things about HP which is why I decided to buy this particular machine. However, I have only had this machine for 3 days and now this is starting. I cannot find a Win 7 (I am running Win 7 home premuim 64 bit) setting that controls when the battery starts to charge. Is this a function of the HP Power Manager? Is this a feature of the battery HP ships with their laptops? Or is this indicating a problem with this machine? I am a college student and I need a reliable laptop for school.
Any information you can provide is greatly appreciated.
Thanks,
HanNan
This question was solved.
View Solution.

Hi,
This feature is intended by design in order to reduce unecessary charge/recharge cycles - reference to this can be found in the 5th paragragh in the document below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00287805&cc=us&dlc=en&lc=en
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

New computer, battery will not charge

Hello,
I just bought my new HP Dv6-6167 cl Entertainment PC from Sam's Club Yesterday morning. As soon as I brought my computer home I quickly realized that the only way computer would turn on or work is if I had it plugged in, and even then my battery would not, and will not, charge.

Thank you, I actually went to Sam's and it turned out I had their last computer like this and they told me that I had to get a hold of HP and order a new battery. I am going to try removing the device and rebooting my computer right now. I just bought the lap top and i have a warranty on it. So, if this does not work how will I go about re ordering a new battery.. should I call HP?

Ipod 1st generation not charging

Hi,
I've an ipod shuffle (1st generation) that is not charging, the shuffle is seen by my system and I was able to update it 1.1.4 firmware version today( I also restored it), but when the shuffle is connected to the high-power USB port it lights with the amber light to indicate that it's charging. However it never turns green and on removing it after >4hrs there is no activity from it and the battery indicator light does not light. It is out of warranty now so I was thinking of replacing the battery myself, however the fact that it's not charging at all would give me doubts that it may not be the battery and might be related to the circuit board.
Anybody seen this symptom before?
Paddy

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

IPhone 3GS no longer recognized in iTunes and does not charge via wall

I upgraded my iMac to iTunes 9.2 when it came out.
My wife then upgraded her iPhone 3GS to iOS4.
Since then it is not recognized in iTunes and does not charge via the wall adapter.
I realize this topic crosses over with several ongoing discussions, but there are no 3rd party peripherals involved here.
The only major changes to our set up have been the itunes and iOS upgrades.
The battery is running down, any ideas to fix this, or other similar experiences welcome.

Went to the Apple store and they replaced the cable.

Hi everybody, my Macbook air mid 2012 MD 231 suddenly shut down then i can not turn it on. I heard a sound like a fuse is blown or something like that. Did any system break or burnt? I did not charge at that moment. Plz help

my Macbook air mid 2012 suddenly turn off after a strange sound (like the sound òf a fuse has blown or something like that) and I also feel a burnt smell too while i am watching a film on the internet and did not charge the laptop at this moment. The sound was from the left of it, and now just a dark screen , even I tried charging it (still has green light at the charge tool). I bought it on 13st April 2013, not often use.
I love apple and i am so sad that a new product which i seldom use could be break so easily and outstanding. It's so late in my country now but i am too disappoint about the trouble so i am writing with hope of supporting from Apple and the community.
Please help , thank bro

You will have to take it to an Apple Store for repair.

Battery heating up, now it is Not Charging

For a while I have had the issue of my macbook becoming very warm when charging, or in use. And it would often say not charging, then i would have to remove and insert the charger a few times before it would work.
Now it is not charging at all, and the battery is at 0%.

If the heat is coming from the battery itself, you probably need a new one. If you're near an Apple Store or third-party service depot, they have a diagnostic they can run to determine if your battery has failed and needs to be replaced. Depending on your model, the battery may be something you can swap out, or would need to be done with a special tool.

Venue 8 Pro not charging?

I have not used this tablet a lot for the first couple of months I had it, then it was not used for 4 months I enjoyed it but mainly wanted it for travel. I used it for month while traveling in October it worked fine and put it up since then I got it out and put it on charge the same cord and charger that came with it and has worked in past. The white light will come on but after say ten mins goes off and the tablet is warm on the back, it has not charged if I try to reset by holding the buttons down I only get a couple flashes of Amber light. And when I plug the charger in no lights come on. Then if I wait like an hour and plug charger back in the white light comes on and again only stays on 10 mins or so and warms up the back. The warranty period is over as of 4-2, any thoughts, bad battery due to letting sit and battery going dead for so long? Tried three different cords but only have the one dell charger.

Dell supplied the wrong charging cable. The port is rectangular and the plug is trapezoidal so it can be plugged in either way, and if you plug it in wrong, you can bend or break the pin block. I handed mine to my wife to see which way she'd try to connect the cable and she immediately tried plugging it in upside down. This is a serious design flaw and Dell needs to recall them all and replace the connector. There's no way in this day and age of computing that it should be possible to plug in a connector upside down like this and then destroy the device. It's only a matter of time before every one of these Dell Venue Pro 8 units is damaged because of this issue. Dell screwed up the design and customers are paying for the mistake. This is 100% Dell's fault. They need to make it right.

My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc

My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help

You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
http://support.apple.com/kb/TS1538

Magsafe Charger not charging - when it lights up may not work

I started experiencing this a few weeks ago. Since then I have gone through 2 adapters.
The magnet works and everything, but it doesnt light up, and where that battery is up there it doesn't show any signs of recognition.
I have to wiggle it a little bit and apply some pressure to get it working.
Even then, it still sometimes doesn't work. It'll be green and say "Not Charging".
It doesn't always do that though. Sometimes it will charge. I have a new battery (from around christmas time) so it cant be the battery... i wouldn't think anyways.
Another thing, is when I get it charging, I have to lay it perfectly still. One little tiny bump or something will cause the light to go off and stop charging. I've cleaned the magsafe part and the part it lpugs into the computer. I have the same problem.
On the "About this Mac" thing, here are my stats (*NOTE this is with the magsafe adapter in, but not working):
Battery Information:
Model Information:
Serial Number:
Manufacturer: DP
Device name:
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 1182
Fully charged: No
Charging: No
Full charge capacity (mAh): 4919
Health Information:
Cycle count: 97
Condition: Good
Battery Installed: Yes
Amperage (mA): -1396
Voltage (mV): 11133
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 180
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 0
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No

I had the same pin problem as many here. My neutral pin (outer most) stop pushing out, I can turn the plug upside down and the pin falls into place. Take a bit of wiggling to get it to charge the computer. This is a new magsafe, only 4 weeks old. I had to have my other one replaced because the exact same pin did the exact same thing again.

Magsafe not charging, no led

Hi,
My magsave cord broke, I worked till batterie 0%. Bought a new Magsafe.
But now the magsafe is not charging and the led light wont shine orange or green.
I did a smc reset, a pram reset, took the batterie out and push the button till it went off. Tried SMC 1.4 update but stated not needed.
Cleaned the connector pins on the mbp with alcohol.
So i figured the magsafe does not work, took the old broken one apart and fixed the cable. Gives power again, but also no light and no charging.
The batterie looks fine, apart from empty:
Charge Information:
Charge remaining (mAh):          0
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          5908
Health Information:
Cycle count:          325
Condition:          Good
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          9937
Does any body have a similair problem and found a fix, please let me know.
Thanks!
Peer
PS:
I have a Macbook Pro 17 inch, late 2008 (?) 2.33 GHz Core 2 Duo
Osx 10.5.8

If I've understood correctly, you still don't know whether either of your adapters is working properly. Test them both with the 15" MBP you mentioned and see whether they work. If either one does, but it doesn't when you test it with the 17" machine and its new battery, then the logical conclusion is that there's a problem with the charging circuitry in the MBP -- subject, of course, to confirmation of the presumption that the new battery is actually good. You may have to visit a Genius Bar or authorized service provider to get that confirmation and have everything tested conclusively.

Magsafe light is dim green and not charging properly

Hello all,
I am hoping that someone could help me out with this. I have a Mackbook unibody from 2008 with the most curent Lion operating system. I recently started having problems with the charing of my laptop. I was using my computer one day to the point that the batery got used up and the laptop turned off. When I brought it home to charge the magsafe light turned on very dim green. It took 4hours for me to be able to start up my computer and has taken 3 days to get to 90% charge which it does not seem to go over. Bellow I have pasted information about my battery which is about 8 months old (new one i bought from apple). For some reason if you look down in the battery information, it's saying that it's not charging. I don't have apple care and money to fix it, any advice would go a long way.
Fully Charged:    No
Charging:    No
Battery Information:
Model Information:
Serial Number:    9G8******13DB
Manufacturer:    DP
Device Name:    bq20z951
Pack Lot Code:    0
PCB Lot Code:    0
Firmware Version:    002a
Hardware Revision:    5
Cell Revision:    100
Charge Information:
Charge Remaining (mAh):    3787
Fully Charged:    No
Charging:    No
Full Charge Capacity (mAh):    4217
Health Information:
Cycle Count:    59
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    119
Voltage (mV):    12291
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    0
Disk Sleep Timer (Minutes):    0
Display Sleep Timer (Minutes):    0
Automatic Restart on Power Loss:    No
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Wake on LAN:    No
Display Sleep Uses Dim:    No
PrioritizeNetworkReachabilityOverSleep:    0
RestartAfterKernelPanic:    157680000
Battery Power:
System Sleep Timer (Minutes):    0
Disk Sleep Timer (Minutes):    0
Display Sleep Timer (Minutes):    0
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
RestartAfterKernelPanic:    157680000
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    No
Charging:    No
Message was edited by: Host

That battery information looks decent, low number of cycles, capacity is about right for that vintage battery, condition is Nromal as it should be, and the voltage is right where you want it, 12 to 12.5 volts.
Have you worked through the knowledge base article on MagSafe connectors to see all is healthy on that end?
If that is fine, then it could be an issue in the charging circuitry in the MB. In which case it would be best to have an Apple tech at the genius bar run some diagnostics.

HP DV6 , Not Charging

Similar Messages

Maybe you are looking for