Hp DV6 Slow In WIndows 8 why

Question

Hp DV6 Is not working Well in Window 8 (c) Help i have Duel Core AMD 2 GB Ram

Answer 1

Hi DV6000 User,
Even if there are any drivers missing there are chances that the Operating system might run slow.
hence first try to check with device manager for any conflicts or drivers missing.
These are the requirements for running Win 8 Consumer Preview
Windows 8 Consumer Preview works great on the same hardware that powers Windows 7:
Processor: 1 gigahertz (GHz) or faster
RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64-bit)
Hard disk space: 16 GB (32-bit) or 20 GB (64-bit)
Graphics card: Microsoft DirectX 9 graphics device or higher
Additional requirements to use certain features:
To use touch, you need a tablet or a monitor that supports multitouch.
To access the Windows Store and to download and run apps, you need an active Internet connection and a screen resolution of at least 1024 x 768.
To snap apps, you need a screen resolution of at least 1366 x 768.
I would also Recommend to have a HDD test run from BIOS to confirm the Hard drive functionality,
Perform a Hard Drive Self Test
Many computer problems are related to soft failures on the hard drive. The comprehensive portion of the HP Hard Drive Self Test repairs soft errors on the hard drive, but does not report the errors. After the test completes, be sure to restart the computer to determine if the test repaired any problems you are experiencing with your computer.
If the computer has two hard drives, you should select the multi-bay test option and test each drive separately.
Plug the AC Adapter into the computer.
Turn off the computer and wait 5 seconds.
Press the Power button to start the computer and repeatedly press the f10 key to enter the BIOS Setup menu.
Use the Right Arrow or Left Arrow keys to navigate through the menu selection to locate the Primary Hard Drive Self Test option. Depending on your BIOS, this may be located below either Diagnostics or Tools .
Select Primary Hard Drive Self Test , and then press the Enterkey to start the test.
NOTE:
The exact wording of the option for your particular BIOS may be slightly different.
The Hard Drive Self Test performs a Quick Test followed by a Comprehensive Test . During each test, the window displays a status bar and an estimated time to completion.
If any test fails , contact HP service and support for instructions on how to order a replacement hard drive.
If all of the tests pass, the hard drive is not damaged. As a rule, HP will not replace a hard drive under warranty that does not fail the HP Hard Drive Self Test.
If there is no physical problem with the hard drive or memory, then try reinstalling your Windows operating system to troubleshoot the problem.
If you find the above Steps help you to solve the issue. or reach a conclusion .
please click on Kudos.
I work for HP