HP dv6809wm BIOS flash property by steps and now computer does not boot to BIOS.

Hello everyone who might read this thread. I have a HP dv6809wm that was running the 2c BIOS so I decided to flash it like I do all my computers to the newest update of 32 version. Nothing happened to the computer while the BIOS was being flashed from with in windows 7 64 bit. Then it did it's auto shutdown in 10 second deal and shutdown property. Now when I went to start it up there is nothing but 5 seconds then it shuts off. I do not even get a BIOS screen or any screen. I tried the whole power off, remove batterys and cable, 15 second hold on power button, and all kinds of things to get BIOS back up. Nothing is working and its still doing the same thing. I need help and any advise is useful.

can you get into bios ?f1 f2 esc del key after power botton ?
your data and hard drive are ok its the bios/cmos that reads hard drive
if you can get into bios have it look for your drive or set to auto detect
if no bios access at all restart the flash program from cd or flash drive floppy whatever you have it on
also there is a jumper on the motherboard to clear bios/cmos you may have to open the cover and by jumper clear the bios
its near the battery tiny print may say cmos or jp20 or reset
jumper will be on 2 of 3 pins move jumper from pins 1 and 2 and put on pins 2 and 3 power up then down put back to pins 1 and 2
here is the bios for that motherboard
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=pv-60348-1
Award Bootblock BIOS v1.0 is a pain but tell you something changed big cause is old ram
any beeps at startup if so look up bios beep codes will tell you whats wrong
got your vista disk ? great you can use that to boot off of
if no disks you can find vista boot disks online use a google search to find one to make on another computer then use on yours
good luck

Similar Messages

When enabled, the flashing green light. And the player does not play music. Also no sound, no voice control...

When enabled, the flashing green light. And the iPod does not play music. Also no sound. But iTunes see my device, and i can synchronize it. Can you halp me?

Have you tried resetting the Shuffle to see if that makes any difference?
Resetting iPod shuffle
Brock

KT6V + sempron 2800 does not boot when BIOS saved

Hi,
I have just bought a new sempron 2800 to be use on a KT6V LSR. I plugget in my KT6V but was not recognised well (but all was working ok with windows). To be recognised, I have flashed with the last bios of MSI my motherboard... and now I have the following problem:
- I clear CMOS, then boot. It comes ok (processor detected and set a 1200Mhz)
- Then CMOS has a bad checksum: I enter setup, then load default, save.
- I reboot: the computer does not boot up.
If I re-clear CMOS I can re-enter setup and modify frequencies or other options. But when I save my modifications, then the computer does not reboot anymore (I have to re-clear cmos again)...
I tried to apply the configuation I found in this thread:
http://forums.amd.com/lofiversion/index.php/t69536.html
It says that SDRAM must be at 333, FSB at 166 and multiplicator at 12. When applying this settings, it does not boot (the leds indicate that the chipset initialisation (the first step) does not pass).
If I just load biios default, the leds indicates that it fails when checking the memory (second step of boot). I suspect that it's a problem of memory (but my memory was working well before !): it's 2x512 of DDR 400.
Any suggestion is appreciated :D . I spent several hours trying to configure the bios but it does not boot..
(I'll also try to find help on AMD forums...)
(Some extra info: my PSU is 26A for 12V, so it seems that it's not due to the PSU (as I read in the FAQ of this forum).
Thanks,
Ptitmain.

AMD Geode™ NX Processor Family & DB1500 Development Board
Powerful Software Development Capability for AMD Geode™ NX Processors
The AMD Geode™ NX processor family consists of three versatile and powerful products - the AMD Geode™ NX 1250@6W* processor, the AMD Geode™ NX 1500@6W processor** and the AMD Geode™ NX 1750@14W processor.***
The AMD Geode™ NX processor family leverages advanced architecture to provide powerful solutions for a variety of Internet edge, peripheral applications, and more. The AMD Geode™ NX processor family provides the highest x86 performance for fanless operations.
The NX processor family leverages Mobile AMD Athlon™ processor technology to deliver superior computing power for a variety of thin-client and other applications including point-of-sale terminals, kiosks, high-end printers and home media systems.
Key features include:
* Low-power consumption
* Advanced 7th generation core
* Long-term manufacturing and support
* 128KB level 1 cache
The AMD Geode™ NX processor family is supported by existing low-cost infrastructure, proven architecture and a long-term supply commitment.
The Geode NX 1250@6W processor is based on an AMD Athlon™ core and demonstrates the company’s commitment to making enhancements to its x86 product offerings and delivering a full line of x86 products to market. The AMD Geode family of embedded solutions is part of AMD’s strategy to offer assets, resources and vision for extending x86 solutions from low-power embedded solutions up through the highest-performing server platforms. The Geode NX 1250@6W processor is a cost-effective solution for customers requiring sub-one gigahertz performance without a fan. Operating without a fan not only reduces design costs and allows for better power management, but also allows the processor to co-exist in virtually any environment because it can operate silently.
The AMD Geode NX 1250@6W processor broadens the selection AMD’s customers have for x86 solutions that range from sub-one watt to 14 watts, allowing them to choose a processor that best meets their individual design needs.
.13um fabrication process
128/256KB L1/L2 cache
266MHz Front-Side Bus
Floating Point logic
AMD PowerNow!™ technology
Less than 6 watt maybe i should replace my PSU with battery (typical) to 9 watt (maximum) Total System Power Dissipation
Socket A compatibility
3DNow!™, MMX™ and SSE Instruction Set

Prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.

prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?, I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?

I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?, I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?

Here is some information and troubleshooting steps from Apple:
http://support.apple.com/kb/TS1440

All of a sudden.. My BB began to feel overheated, turn it off and now it does not turn on, even does not charge

All of a sudden.. My BB began to feel overheated, turn it off and now it does not turn on, I remove the battery because it felt hot.. I changed it by a new one.. began to flash.Few seconds later.. once again began to feel overheated and shut it down itself... Now.. Its dead =( I only have 8 months with the BB and now is Broke??? Its frustrated... I lost my information..
Have you ever experience this? What can I do?
Thanks

Not much I'm afraid but when mine overheats and won't charge I put it in the fridge for a minute to cool down then try and recharge. Doesn't always work though. Can't wait for contract to expire and change for something better.

Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

I updated to iTunes 10.7 and now iTunes does not see my iPod Touch. It says the Apple Mobile Device USB Driver cannot be installed.

I updated to iTunes 10.7 and now iTunes does not see my iPod touch. After the update I got a message that the Apple Mobile Device USB Driver could not be installed. I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem. I have followed the suggested fixes in Apple Support. Any suggestions? Thanks!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Installed os X Mountain Lion and now computer won't boot (first had keyboard issues-reverse caps)

Hi all,
I just updated my macbook air to osX mountain lion and now it will not boot at all.. At first I was having issues with the keyboard and keys typying weird characters.. and the caps lock was stuck on reverse. Now I have nothing.. Can someone help.

What happens when you try to boot?

TS3999 icalendar does not work on my PC, it continues to get an error message. It worked before and now it does not anymore

Icalendar no longer works on the PC that I am using. It did in the past and now it does not. Coincidentally, this happened after my iphone was stolen and it was replaced with the iphone 5s. Does it have to do with my settings?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Can anyone point me in the right direction for the link to download Acrobat 9 Standard? I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Can anyone point me in the right direction for the link to download Acrobat 9 Standard. I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Hi,
Standard or Pro would be licensed through your serial number, the download link and downloaded file would be the same for both of them.
Pro or Standard would be determined after you put in your serial number.
Download Acrobat products | 9, 8
Thank You
Arjun

I upgraded iTunes on my pc and now it does not recognise any of my iPods or iPhones?

I upgraded my pc with the new iTunes and now it does not recognise my iPod or iphone

The apple ID as I did not see anywhere just for email address , but then the ID is the email address, original ID does not work with new or old password, but is displayed on the apps page on iPod when trying to update apps, so ID is changed on PC and all is well it is the iPod that isn't

My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

Right click the heading at the top of the message list and select From from the list of options.

Upgraded to iTunes 8.1.1 and now iTunes does not recognize iPod

I recently upgraded to iTunes 8.1.1 and now iTunes does not recognize iPod. The iPod says "Do Not Disconnect" but the device is not listed in iTunes so it will not sync.

Hey, we are having exactly the same problem! My old ipod died a slow death so I bought a new nano 16gb 4th gen and I can't use it as itunes isn't recognising any ipod being plugged into it. I've been through the whole support database and every USB port is working on the laptop, so I know the computer is recognising its there its just itunes itself - even removed and downloaded it again but no change! If anybody has any ideas what is going on please let me know!!!!

HP dv6809wm BIOS flash property by steps and now computer does not boot to BIOS.

Similar Messages

Maybe you are looking for