HP dv6t - Laptop seems to be charging but doesn't display so

Hi,
I've a 17" HP dv6t. I am seeing issues like when the AC adaptor is plugged in, there is no indication in the Battery meter or near the AC inlet on laptop, that the battery is charging, but the percentage of charge increases meaning the battery is charging.
Is this an issue with the laptop? Any fixes?
Thanks in advance,
Kashyap

Your USB ports probably aren't powered and hence can't charge the shuffle. Even though you have a data connection doesnt mean that the shuffle is receiving enough power to actually charge. Make sure to try all your USB ports, expically on the back. If the shuffle doesnt charge on any of your computers ports, for testing purposes plug it in some where else on a newer computer and see if it charges. IF it does charge somewhere else than you could either get a powered USB hub for your computer or you could buy a compatible USB charger.

Similar Messages

My ipod charges, but doesn't sync to itunes

My iPod charges, but doesn't sync with iTunes.

This is the Mac OS X Technologies > iSync forum - you are a Windows user.
iSync is a Mac-only application for syncing Contacts and Calendars to mobile phones and PDAs. It has nothing whatsoever to do with Windows, iPods or iTunes.
Try posting in the iTunes for Windows forum.

After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.

After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.

After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.

My Contacts program opens but doesn't display on the screen (it appears to be off above the top right hand corner).

My Contacts program appears to open, but doesn't display on the screen (it appears to be sitting just above the top right hand corner). any suggestions on how to get it back?

Launch Contacts, then on the "Window" menu select "Zoom". That should maximise the window and give you access to the bottom-right corner where you can resize it, and the bar at the top which you can drag around.

Creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit ), creative cloud installed and run but doesn'

creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit ), creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit )
don't know if it's relevant or not , I run Windows 8 64-bit

111994 please try utilizing the steps listed in App doesn’t open | Progress wheel spins continually to resolve the current error.

Laptop says, "plugged in, charging" but it's not charging

I have a Satellite T134-1330 and it is a year and a half old. I was traveling, so my computer was stashed away for three weeks. When I got back, it was dead, but turned on when I plugged it in. Then I noticed later that it the battery was at 22% and not charging any more, yet it says it is. I tried taking it out and putting it back in, and I also tried draining the battery and then charging it. Now it just says, "0% remaining (plugged in, charging)" I can't figure it out! I googled it and found someone with the same problem. Could the first response be the solution? http://answers.yahoo.com/question/index?qid=20100703035214AA9YPb0 Thanks

I've been having problems with the laptop being plugged in but then shutting down without warning from low battery. Just today my laptop shut off without warning so I started really paying attention to it, and I noticed that the battery icon would say "Plugged in, charging" but the charge was actually decreasing. It got down to 8% and I was frantically googling for a solution, because it was losing charge even though plugged in, when I found your post, Peter. I followed the steps and now it is charging and is up to 87%. Remains to be seen if this is a permanent solution, but it saved me a lot of aggravation today! I have dozens of eBay auctions going right now and don't want to be without my laptop. Thanks, and please reply if you have any more information about this issue with the Satellite L645D laptops.

TS1373 my ipod touch 4th gen wont show up in my computer on my windows laptop. it starts to charge but it still wont show up please help

ill connect my itouch to my computer via usb port and it will begin to charge but it will not show up in "my computer" please help

The Nano uses different drivers than iOS devices like the iPod touch
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

IPod charges, but doesn't show up as a drive, nor does it show up in iTunes or the Device Manager.

I was given in iPod Touch 8GB (used) for my birthday on the 8th, but I still haven't been able to get any use out of it it. When I plug it into the laptop it charges, but it isn't recognized as a drive, doesn't show up in the Device Manager, and is not recognized by iTunes. I've tried plugging it into a different computer, using a different cord, re-installing drivers, re-installing iTunes - everything! It's also stuck in recovery mode, and I can't do anything to get it out. I've tried restarting it, but it goes right back into recovery mode, telling me to connect it to iTunes. It's driving me batty! If anyone can tell me how to fix this, it would be greatly appreciated. Thanks! c:

See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not then it is time for an appointment at the Genius Bar of an Apple store.

IPhone 4 shows it's charging but doesn't!

Ok, so I have a 32GB iPhone 4. I use up all my remaining battery on the way home from school and plug it into my MacBook Pro to charge. Immediately I get a random E0000012 blah blah error (or similar, don't remember exactly what error it was, but it definately started with 'E') on iTunes. Then the iPhone doesn't show up in the iTunes sidebar anymore, though the phone has the thunder to indicate its charging. I look up the error on Apple.com and it says to try again after restarting the computer. I do so, but it still doesn't work. I still get the error, though the phone still has the little thunder. I give it the benefit of the doubt and let it sit there, plugged in for a few hours. It doesn't charge at all, still 0%. So I try to plug it into a wall socket and leave it overnight. Same thing - shows its charging, but 0% the next morning. I try and try using different USB cables and different wall sockets. It just isn't working. What do I do? Help!

Hi jeein0904,
It sounds like you are having issues with charging your iPhone. I would suggest that you use the steps in this article to troubleshoot -
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Specifically -
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
Thanks for using Apple Support Communities.
Best,
Brett L

MSI 970a-g46 motherboard starts up but doesn't display anything.

Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
CPU: AMD Phenom 2 x4 965
GPU: nVidia GeForce 560 GTX
Ram: 8gb Kingston HyperX Fury 1866mhz.
PSU: Corsair 650TX (650 Watts)
Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
I've gone over and checked/tested numerous things:
* The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
* I've tried jumping the CMOS multiple times to no avail.
* I tested the ram on another computer and it worked just fine on that one.
* I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
EDIT: Some other things I did but forgot to mention:
* Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
* Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
* Re-seated GPU multiple times, re-connected cables multiple times.
What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

Quote from: rhradacut on 06-January-15, 16:49:14
What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
Once again thanks for helping out on solving my problem.

IPhone 4s (6.1) gets message or whatsapp message, vibrates but doesn't display new message notification on screen

As per title really.
Whenever i get a text or whatsapp message my phone vibrates (sometimes twice as if i have two messages) but nothing is displayed on screen.
This is ever since updating to 6.1

Hi,
I tested with Outlook 2013 and Windows 7, once the new incoming message becomes read, the "new mail" envelope disappears as it should.
Does this issue persist if you switch the view to others? I suggest we try to start Outlook with the switch "/cleanviews" to reset default view:
Press Win + R, type "outlook.exe /cleanviews" in the blank box, press Enter. This method resolves issues related to the corrupted views, and we can check the result again after Outlook resets default view.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Laptop puged in shows charging but batery is not charging

Hello,
Ihave an HP Probook 4540s, and recently it started to act up, i plug it in it shows on the window pluged in,charging. The animation moves for a second and then stops.
Weird thing is sometimes it charges only if i leave it for the night pluged in. But last 2 days it shows no sighn of charging, i have ran Hp batery check with cable pluged in and not results are drastically different. With cable it shows to replace teh batery, when i plug it out it says batery is ok.
What do i do?

I met this problem in my new 8460p which the battery only charged 2 times. I found in the web but a lot of solutions are useless.
After Battery Checker by HP support assistant I found the Cell Voltage 1:0 mV. Is it any problem here?

HP Pavilion dv6t- power cord in and charging but computer doesn't recognize it

Hello all,
Sometimes when I plug my laptop in, my laptop says it's still on battery power, the light on the outside of the ac outlet won't turn on and my battery bar tells me the battery is discharging, even though it is definitely charging, the charging light on the front of the laptop is on and the battery will go to 100%. I don't know how to tell if this is a software issue, an issue with the cord, or an issue with the computer's outlet. Usually when this happens, I unplug it and plug it back in multiple times until the little light comes on and the computer recognizes the ac. Any suggestions? I want to resolve this before my computer gets some kind of electrical shock.
Thanks,
-Rebecca

YAY!
called HP support and they won't even talk to me unless I pay them for support. This is bogus. Obviously, this is either a known issue or a normal indication that either the battery or the ac adaptor is malfuctioning.
So, as I understand it, these are my choices:
1. Give in to HP extortion and pay them just to talk, in hopes they actually have a relevant solution.
2. Pay $100 for a new battery and see if that is the problem.
3. Pay $75 for a new ac adaptor to see if that is the problem.
4. Live with the issue and pray that my laptop doesn't just stop working at the worst time possible (on a stage in front of hundreds of people).
Thanks HP, the only thing I know for sure is that I will not be buying another one of your products.

IPhone 4 charging but doesn't show signs of charging and wont connect to windows pc

Hi. I tried to charge my iPhone 4 today however it didn't appear to be charging. I tried different cables, chargers, computers, turning the phone on and off - including holding the home button and lock button down simulationsly, but still wouldn't work.
I later realized that the phone was in fact charging as when I went to check it later the battery percentage had increased. However there is no evidence of charging when it is plugged in i.e: there is no charging icon in the battery bar at the top. Furthermore, the phone won't connect to itunes and isn't even recognised by my laptop. It just acts like it's not even plugged in (when charging and when plugged into my laptop). Any ideas of what might be the problem?
Many thanks
Harry

Hello Plimmer4
Check out the articles below to first get it recognized and then troubleshooting the charging issue. If you can get it recognized, check to see if there are any updates that can be done to improve that connection.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Regards,
-Norm G.

My iCloud calendar on Outlook 7 (64 bit) no longer displays any information but the info is still availble to send by email. so it seems it's n the background on the my PC but doesn't display. Also the information is in the iCloud on-line calendar

. My iCloud calendar on my Lenovo Tablet PC running Outlook 7 (64 bit) suddenly stopped displaying any appointments. The data is still on my iPhone 4S and online in the iCloud server. Also strangely when I start typing a new appointment it displays the typing until I press ENTER when it disappears - BUT appears on my iPHONE! Seems like an OUTLOOK display problem.

> The only problem, and a big one, is that when I insert
the
> image for the whole FW document (or even for just the
logo itself), even
> when
> it says the page has no margins or padding, it still
seems to set this
> image in
> and down about 10 pixesls, making it offset with the
gradient background
> and
> leaving the edge of the logo visible (which is supposed
to look like it
> runs
> off the page). How can I fix this?
You need to set 0 margin and padding on the body tag. Copy
the following
into the head of your document just before the closing head
tag (/head>)
Preferably it should go into an external stylesheet, but by
the sounds of
things you are not using this as yet.
<style type="text/css">

</style>
> And once it's working, how do I set these two areas, the
side gradient
> with
> logo and the top nav bar with site name, to be the
template for the rest
> of the
> site with the big open area I have left on the rest of
the page as the
> editable
> region? It seems to me like once I get this set as the
template, the rest
> of
> the pages will come together fairly quickly and easily.
Once you have added the above to your page, you need to save
the page as a
Template. You will be asked to create an editable region
(which is the area
that will be changed on each child page created from this
template).
The DW help files do offer some information on how to create
Template
pages - that may be the first stop for you :-)
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
Spry Widget Examples
http://www.dreamweaverresources.com/spry-widgets/

HP dv6t - Laptop seems to be charging but doesn't display so

Similar Messages

Maybe you are looking for