HP DV7-3165dx Needs New Adapter - Help?

My HP dv7-3165dx needs a new adaptor as the original one no longer works. Should I just buy this one in the HP store? The original was a 65W. I've been using a 90W one a family member lent me just so I can use my laptop. I just want to make sure it's fully compatible and the best choice. Never had to buy an adaptor before. Lately my laptop just seems to be getting...old and tired, I suppose!
http://www.shopping.hp.com/en_US/home-office/-/products/Accessories/AC-Adapters/H6Y85AA?HP-65W-AC-Ad...

Hi,
65W or 90W or 120W can be used. The main 2 things: the tip and voltage. Voltage can be minus/plus 5% but the tip MUST be fit perfectly. Many machines come with TWO units, the first one is for on the road (lighter and smaller).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Needing new Camera; Help!

Time for a new camera and after reviewing over and over, I just get more confused on which one I should pick. I am just a Mom of a Toddler, no pro here. I don't understand all the technical terms these reviews are using such as ISO and stuff. I just know the qualities that I want are:
1) Fast picture taking (I have a toddler, hate getting the shot after the activity is done.)
2) Battery save (Sometimes I forget to shut the thing off)
3) Good low light picture taking ( I do take alot of evening pictures outside and in, some with flash, some without)
4) I like the lithium batteries (in the past, have had better luck with those)
5) Don't want to spend and arm and a leg
6) Has to have a date stamp option
7) Compact (doesn't have to be the size of a credit card or anything like that, though; just needs to be able to fit in the diaper bag/purse)
8) Can range in picture taking from up close to the far (need the range)
9) I like image stabilization and face detection, but not necesarry
10) Really need it to operate well on auto ( I have a toddler)
11) SD Card ( don't want to switch that up)
12) Anything else that would be helpful for me, the ametuer, to take nice quality pictures
If anyone can please help me, I would so much appreciate it. You would be saving me some headaches!! Thanks.

Need a budget number otherwise no one is going to know what to recommend.
Crystal
Superuser
Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
*Remember to mark your questions solved and click the star to give kudos to show your thanks!*
While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Need new user help

i am trying to retrieve the length of multiple strings for a homework problem. we have to declare 5 string instance variables (string1�string5). i am wondering what the code is to retrieve any one of the five lengths. the way my code is now i can only get one.
public int returnlength() {
int charCount1=string1.length();
return charCount1;
i know i am missing something very easy here. thanks for the beginner help. i have been looking at this for over 3 hours now. i tried using parameters but i keep messing up the code.

Here's what sounds like a start, though it seems you already did something like this and shot it down as not complying with the requirements:
public class Homework
public int length(String s)
    return s.length();
// create other methods for dealing with equals(), etc
public static void main(String[] args)
    // declare 5 strings:
    String str1, str2, str3, str4, str5;
    // initialize them somehow - the snippet from your assignment does not specify how
    // get the length of each
    Homework hw = new Homework();
    int len = hw.length(str1);
    // what are you supposed to do with the result?
    len = hw.length(str2); // invoked again on a different string
    len = hw.length(str3); // etcetera
}

DV7 6197ca Needs New Fan

Does anyone know what fan I should get? The one in my DV7 has decided that it doesn't like rotation. I can provide any information required to find exactly what is needed.
This question was solved.
View Solution.

Hi,
Please use the first manual of the following link to find out part # and how to replace the fan:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&docname=c02861762&lc=en&product=51368...
You have to use part number to order fan from HP shop in your country/region or online such as eBay the follow the book to replace fan (if you feel you can do it yourself).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Ram broken, need new Ram. help me

I bought my Mac Pro 13inch ,manufactured in late 2011. I have been using my macbook pro for 8months and started to kernal panics.
When I bought my mac pro , I upgraded Ram to 8GB at apple store. im clueless when it comes to computers. Why RAM is broken? How did it happened? Do I need to buy Ram from apple or third party? Is there any risks or difference? When i first upgraded it at the apple store in Singapore, I paid 8$ more with price of the Macbook Pro.
About the Mac Pro im using : Mac OS Ver: 10.7.2
HArd drive 500 Gb.
Can u explain it to in simple english? thank you. what is RAM and its purpose?

Not sure about Canada, but OWC (Macsales) and Crucial are the best places to go for Mac RAM.
These from Macsales - http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=438&type=Memory
Or these from Crucial - http://www.crucial.com/store/listparts.aspx?model=MacBook%20Pro%202.4GHz%20Intel %20Core%20i5%20%2813-inch%20DDR3%29%20Late-2011&Cat=RAM
Should be suitable.
I'm intrigued as to how the tech said the RAM wasn't from Apple, though.
Apple doesn't make RAM; it uses the same manufacturers as all the others do, albeit with rather tighter quality specifications.
Hynix and Samsung are two frequently encountered (from the 3rd party retailers, too), but there are many others.

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

I can't open a doc in Pages, msg says I need "newer version of Pages" but it's already downloaded and updated. Help plse

I can't open a doc in Pages, msg says I need "newer version of Pages" but it's already downloaded and updated. Help plse

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Peter

Need a little help new to mac

Need a little help I'm new to Mac.. i have had my ibook for over a year now and i like it a lot, but some times my usb post dies on my for a couple days maybe weeks. Ill have my ipod connected and when i go to plug in a flash drive. It doesn't detect my ipod anymore and my usb port don't work. it says that they were "removed improperly" and now they are not working again..i have tried to reinstall the whole os again and that doesn't work i don't have the hardware test disk so i don't know what could be the problem i know its not the logic board is there any test i can do to it to find out the problem its an ibook late 2001... there is no reset button on it. i tried to hold in the space bar and now when i boot up i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up im a mess need some help

+it says that they were "removed improperly"+
You have to go to the iPod's icon on your computer (or the flash drive's icon), select it and eject it there before removing it. Otherwise, data can be corrupted and/or lost. Repeatedly removing it without ejecting it from the desktop can cause it not to be recognized any longer.
If your iBook is a "late 2001" model. It should have a reset button. Check out the chart here to make sure which model iBook you have:
http://support.apple.com/kb/HT1772?viewlocale=en_US
+i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up+
It's trying to find a network volume from which to boot.
Once it's booted up, go to System Preferences > Startup Disk, and select your Mac OS X startup volume. Then close System Preferences. The next time you start up, it should start up without looking for a network volume.

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Some basic printer troubleshooting steps before worrying about a printer driver:
1. Have you tried turning the printer off and back on?
2A. Is the printer attached with a cable?
     If yes, have you tried unplugging and re-plugging both ends of the printer cable?
     If that does not help, can you test the printer with another cable?
2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
     Have you tried restarting your wireless router?
3. Have you tried restarting your MacBook? (Be sure to save your work first.)
4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
5. Have you updated OS X or the program you're trying to print from recently?

X100e - Not Charging (Do I need new AC adapter?)

So I've had an x100e (and its original AC adapter) since 2010 and all of a sudden the battery stopped charging and slowly drained, so its obviously not a problem with the battery.
The ac adapter used to cause a few sparks at the metal parts of the plug when plugging it in, but not anymore. Silence.
Do I need a new adapter?
Where can I get one?

Thanks for the response.
Luckily I have a voltmeter, but sadly, it is not providing a reading on any part of the inside or outside of the barrel. There's definitely no electricity going through the adapter. The box part does not heat up while plugged in.
Now, I've been looking for new adapters, and there are two that look similar but have different wattages. There's 90W and 65W (same as the one that came with the laptop). Which one is recommended?

Adapter Help needed desperately

Dear All,
I am attempting to create a new Adapter with integration 2.1 and am hitting a
brick wall when attempting to create the WAR/JAR/RAR files needed before deployment
(I think !!!). Has anyone got an example out there of what I need -
Kind regards
Tony

Dear Tony,
Have you read the ADK guide? See
http://edocs/wlintegration/v2_1/devadapt/index.htm
Best regards,
Timothy Potter
Senior Software Engineer
eCommerce Server Division
BEA Systems, Inc.
"Chris Stead" <[email protected]> wrote in message
news:[email protected]..
Tony,
There are several sample adapters that ship with WLI 2.1. You can findthem in your
$WLI_HOME\adapters directory. Specifically, they are the DBMS, EMAIL andSAMPLE
adapters. We use the ant utility to build and package our adapters. Youwill want to
look at the build.xml for each adapter to see what we do to package theadapter for
WLS.
$WLI_HOME\adpaters\dbms\project\build.xml
$WLI_HOME\adpaters\email\project\build.xml
$WLI_HOME\adpaters\sample\project\build.xml
Cheers,
Chris
Tony MAy wrote:
Dear All,
I am attempting to create a new Adapter with integration 2.1 and am
hitting a
brick wall when attempting to create the WAR/JAR/RAR files needed beforedeployment
(I think !!!). Has anyone got an example out there of what I need -
Kind regards
Tony

I have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.

Need a little Help with my new xfi titanium

+Need a little Help with my new xfi titanium< A few questions here.
st question? Im using opt out port on the xfi ti. card and using digital li've on a windows 7 64 bit system,? I would like to know why when i use 5. or 7. and i check to make sure each speakear is working the rear speakers wont sound off but the sr and sl will in replace of the rear speakers. I did a test tone on my sony amp and the speaker are wired correctly becasue the rear speakers and the surrond? left and right sound off when they suppose too. Also when i try to click on? the sl and sr in the sound blaster control panel they dont work but if i click on the rear speakers in the control panel the sl and sr sound off. Do anyone know how i can fix this? So i would like to know why my sl and sr act like rears when they are not?
2nd question? How do i control the volume from my keyboard or from windows period when using opt out i was able to do so with my on board? sound max audio using spidf? Now i can only control the audio using the sony receiver.
Thank you for any help..

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

I lost my receipt (bought a beats earphone at Apple store in Miami. Now I need to use the warranty. I have the earphone in the box, almost new! Help me please!!!

I lost my receipt (bought a beats earphone at Apple store in Miami. Now I need to use the warranty. I have the earphone in the box, almost new! Help me please!!!

If you paid with debit or credit card, contact your financial institution for
a copy of the transaction.
If you used your AppleID when making the purchase, it may be in your
purchase history in the AppleStore app.

HT5936 need someone to help me to unlock my new ipad ?

my new ipad has been locked coz kids been pressing the wrong 4 digits security code.need someone to help me to unlock it again

Please see iOS: Forgotten passcode or device disabled after entering wrong passcode (HT1212) for details on unlocking iPhone and iPad devices; basically, restore it, or reset it.

HP DV7-3165dx Needs New Adapter - Help?

Similar Messages

Maybe you are looking for