HP DV7 6135dx. Can't install ATI Catalyst Control Center. Need help!

Hi! Have laptop HP DV7-6135dx. Windows 7 x64 Ultimate. I can't install Catalyst Control Center.I see in "Hardware" Mobile Intel(R) HD Graphics and Radeon (TM) HD 6490M like video adapters. Both this cards look like drivers installed completely.
I'm trying to install CCC to have choice to select one or another card.I've download all video drivers for this laptop model.I've try to install:1. AMD High-Definition Graphics Driver 8.830.6.2000 Rev. Oct 5, 20142. AMD High-Definition Graphics Driver 8.882.2.3000 Jul 31, 20143. Reference driver 12-10_mobility_vista_win7_win8_64_dd_ccc_whql_net44. Autodetect ATI Driver Software and it was install some driver.Always i have error message "Application Install:install package error" and installation process interrupted. I've try to fully uninstall all video drivers and install them from beginign, have try to clean system and registry by CCleaner, i think i've try everything but can't install CCC. It's always stuck with error.This is log ATI CCC screen Before i have install new Windows 7 i have seen on previous Windows 7 Catalyst....I don't know why i can install it. Can you help me please?

, Hello and thanks for posting on the HP support forums. If you are downloading this from the AMD site it may not work. The video chipset is built by AMD Radeon however it is propriatary. Unless you download the software for the system from the notebooks support site it may not work. As well you have to check to see if that notebook was released or was given windows 7 as an os. Here is the link to the support page. HP Pavilion dv7-6135dx Entertainment Notebook PC - Software and Drivers If your system came with it pre- loaded then you can do a system recovery to get it back. You will have to back up all your data before this. HP PCs - Performing an HP system recovery (Windows 7) Please let me know how things go. Thanks again for posting and have a great day.

Similar Messages

Satellite L840/020 - need to re-install ATI Catalyst Control Center Win 8

I keep getting a message from Program Compatibility Assistant that I need to reinstall ATI Catalyst Control Center.
I went to their website and it said Toshiba laptops would need to get this from Toshiba.
I can't find this download.
My graphics card is the AMD Radeon 7670M
Satellite L840/020
Part No. PSK8LA-020007
Windows 8 Pro 64 bit

It seems to be that this notebook model is not supported for Win8. I found one US model with the same graphic card so try to install Win8 beta AMD display driver offered here .

Error in installing ATI catalyst control center after formatting my laptop

please see this thread. thankyou
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/error-in-installing-ATI-catalyst-control...

Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

I can't install the catalyst control center...why?

tried every way. complete deinstallation of all AMDContent, then reinstallation but the ccc doesn't install.

, Hello and thanks for posting on the HP support forums. If you are downloading this from the AMD site it may not work. The video chipset is built by AMD Radeon however it is propriatary. Unless you download the software for the system from the notebooks support site it may not work. As well you have to check to see if that notebook was released or was given windows 7 as an os. Here is the link to the support page. HP Pavilion dv7-6135dx Entertainment Notebook PC - Software and Drivers If your system came with it pre- loaded then you can do a system recovery to get it back. You will have to back up all your data before this. HP PCs - Performing an HP system recovery (Windows 7) Please let me know how things go. Thanks again for posting and have a great day.

ATI Catalyst Control Center is not loading with the latest drivers. Help!!!

I have installed latest ATI drivers from Lenovo 8.712. After that ATI Catalyst Control Center is not loading. The icon is present, when I click display properties. But when I click it, nothing happens. How can I downgrade to the previous version?
And another question: I have a docking station and 2 monitors. One of the monitors with DVI connection is working fine. Is there any way to disable laptop screen and enable second monitor through analog D-SUB.
Thank you in advance.

Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

T500 ATI Catalyst Control Center cannot be started

I have some troubles in opening the ATI Catalyst Control Center.There was a window poped out saying that ATI Catalyst Control Center cannot be started because the currently active GPU is not supported. I have already reinstall this drive and the graphic drive. But the problem is not solved. I am wondering what could I do now?

Right click on the battery in the task bar and make sure your Switchable graphics are set to Performance, if it is in energy savings the ATI control panel will not function, you need to use the Intel graphics setup instead.
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

Can't install ATI Catalyst

Hate to ask for help, but can't find anything from google. Also sorry if this is the wrong place to post it. Anywho, I'm having trouble installing ATI Catalyst. When I installed Arch I installed the oss drivers, but I can't play any resource heavy games (like Urban Terror). If there's another way o fix it without installing Catalyst, that's cool to.
Anyway, when I do pacman -S catalyst I get:
resolving dependencies...
looking for inter-conflicts...
:: catalyst-utils conflicts with libgl. Remove libgl? [Y/n] y
error: failed to prepare transaction (could not satisfy dependencies)
:: ati-dri: requires libgl>=7.2
I'm not exactly sure how I should take care of that. Do I need to remove everything installed by the OS driver or what?

Alright so I think I've got it good.
http://crunchbanglinux.org/pastebin/176 - xorg.conf
I removed libgl and xf86-video-ati, thats all the OS driver comes with, right? Tryin' to make sure I have everything cleaned up. ;o

ATI Catalyst Control Center

OK... so ive installed the video driver but when i look at add remove programs it does not show the Catalyst Control center is installed .. nor does it show up when i right click on the desktop. i have .net Framework 3.5 installed. what is the problem and/or where to i download the Control center... my unit is T60 2623 D6U running windows XP pro.
UPDATE: i will keep this up incase someone has this problem... the reason it wasnt working was because i never executed the Setup.exe file.. you must load the ATI software for it to work.. yes i am a noob sometimes....
Thanks to all who didn't flame this post.
Message Edited by Gdenison on 06-04-2008 03:01 PM

Funny enough i had the exact same problem on an A50 desktop. When you run the Catalyst "installer" it doesn't actually install, it just extracts the programs into a folder. you then have to navigate to the files and run the setup
T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

How to get ATI catalyst control center.

I'm using mac book pro with bootcamp as well. So i'm using every support software downloaded from windows by Bootcamp. However, i'm missing that ATI CCC which is crucial as i have an extended 2nd display monitor hooked up to my macbook pro. There is a slight gap between the borders and the displays when the highest possible resolution is configured for the 2nd display. I Know i can install ATI CCC on my windows as i've done it before but i've unfortunately formatted my windows without any backups. The recent display drivers from the AMD site doesnt work at all which is also why i use the support softwares from BOOTCAMP. Where can i get the ATI CCC package alone to maximize the resoultion of my 2nd display? or is there another solution to this.
The highest possible resultion for my 2nd display now is 1920x1080 which leaves a gap betweent he borders.
The resolution that fits well into my 2nd display is 1680x1050 which makes everything seems so blurry.
Many thanks.

Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

I keep getting error code 204 and can't install the creative cloud. Need Help!?!

I am currently trying to install the Creative Cloud but error: 204 keeps popping up stating 'There seems to be a problem accessing a critical file/directory during download...'
Can anyone help me?
Thanks

So, padraig, five weeks later, have you had any luck seeing this resolved?
Chat sessions with two different support techs, and Error 204 still prevents my CC update install.
Meanwhile my boss is paying for CC while I continue to use CS4.
I know I'll have to go back to Adobe support, but I'm hoping someone will find a solution and post it in the forum.

ATI Catalyst Control Center wont save settings betweem reboots

I figured out I could "dim" my iMacs X1600 video by reducing the "color levels" from 1.0 to 0.5, and now my screen is not too bright anymore. When I choose "Apply", then accept that it is still working, it apparently does not write these new settings to a file anaywhere. If I restart X, or reboot te machine, the settings are back to 1.0, and too bright. I did this as both my non-root and root accounts, and it didnt save it either time. Any suggestions?

Yes, it is true that they are stored in /etc/ati/amdpcsdb.
Phoronix wrote:[...] AMDCCCLE doesn't store any changed settings from AMDCCCLE in the xorg.conf or an INI file in the home directory, but in an intermittent location. AMD's driver and the aticonfig and amdcccle utilities use the AMDPCSDB. The AMDPCSDB is the AMD Persistent Configuration Store Database and is a live database that is comparable to the registry within Microsoft Windows. The file where the AMDPCSDB data is written to is /etc/ati/amdpcsdb and is done when the X server shuts down. AMD engineers prefer keeping the display-related settings in the AMDPCSDB so that any xorg.conf changes are minimal. [...]
Last edited by Wintervenom (2009-01-07 17:54:49)

Safe to disable ATI Catalyst Control Center?

Hi, just wondering whether it's safe to disable the above from startup services(via sevices.msc)?
Currently running Vista Business 64-bit (T400 with ATI discrete graphics card)
Thanks in advance!!

Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

HT4623 My iPod touch 5 can't install iOS 7. I need help

I need help

probably just need to wait it out, or restore the ipod touch in itunes to see if it changes.
dante

T500 2055 2PG is not opening ATI Catalyst Control center

Hi,
I'm trying to deploy external LCD panel via docking station and need to adjust setting for the panel. However, control center do not open by right clicking on desktop.
just few seconds time glass remains with arrow and then nothing happens.
ideas ?

Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

Satellite A100-237: I do not have the Catalyst Control Center after driver installation

Hello,
I use a Satellite A100-237 laptop. 1.83 GHz Core Duo, Ati Mobility Radeon X1600 512MB Hypermemory, 1.5GB DDR2 RAM.
My laptop now seems to use only the own 256 MB RAM (Graphic card's own RAM).
I purchased Need for Speed Carbon and installed it to my laptop.
When I tried to open the game, a blue screen appeared for less than 1 seconds, and than system restarted. Windows said that that was a critical error and a driver stopped Windows XP to operate, therefore system is restarted.
I searched in the net for this problem and, people said that, when they updated the driver the problem is solved.
I downloaded Display driver 8.241 (download file name: display_xp-8241.zip) from toshiba-europe.com.
Driver installed but while installing ATI Catalyst Control Center, at a point the installation process stoped continuing. I had to end the task after a while.
It said that driver is installed and system must be restarted.
Now the game works, thats not the problem, however I do not have the Catalyst Control Center. (Where I recently use it for connecting other screens to my laptop)
How can I solve this problem?
Sorry for long letter,
Thanks for helps.

You may run the driver installer again, use the custom installation option and select Catalyst Control Center only. Alternatively, you may remove the entire driver and try re-installing again. I suggest you also download the notebook driver package from ATI's website instead of Toshiba, as their drivers are usually more up-to-date (although it might be less safe to use them, I don't know).
And BTW, I have the same notebook and I have failed to see an option to set the machine to use the VRAM *only* instead of borrowing from RAM whenever necessary. Any ideas?

HP DV7 6135dx. Can't install ATI Catalyst Control Center. Need help!

Similar Messages

Maybe you are looking for