Hp DV7 Hibernates but won't wake backup forceing me to shut it off on reboot it goes to reapir

I have a DV7-6175US that had been working fine and then recently the laptop will go into hibernate mode but will not wake up when pressing any keys or anything and it forces me to then do a hard boot and on reboot windows repair comes up and I have to go through that. Now it does not happen every single time it is pruely random event. I have checked for Virus and Malware bugs and I have gone into the BIOS and set the deafults into place.

I see then your could try this:
http://www.howtogeek.com/howto/11238/using-system-restore-to-recover-your-windows-7-computer/
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

Similar Messages

TS3297 Cannot remember security answers ...I can get into my account but won't let me purchase because I'm buying off a new I phone or a new laptop .. Spent 45 min on hold last week to be then told someone would contact me back never happened

Cannot remember security answers ...I can get into my account but won't let me purchase because I'm buying off a new I phone or a new laptop .. Spent 45 min on hold last week to be then told someone would contact me back never happened

Use this Link > Apple Support iTunes Store Contact

Sometimes my MacMini won't wake up. Have to turn it off/on. What can cause this?

Sometimes my MacMini won’t wake up. Have to turn it off/on. What can cause this?

Open System Preferences > Energy Saver
Click: Restore Defaults
If that doesn't help, try Resetting the System Management Controller (SMC)

Mac Mini/Mountain Lion sleeps but won't wake up (or crashes) every night.

Hi everybody,
I have a mid-2010 mac mini server on which I recently installed Mountain Lion 10.8.2 (without server stuff).
Every night, it stops responding. The led is on but the display is off and it does not respond to mouse/keyboard. I even tried remote desktop.
The only solution is the power button...
What I already did :
- Reset Pram/Nvram
- Reset SMC
I also took a look at the console and I found a message that is fired just before the machine stops responding.
---- DAY 1 ----
24/09/12 02:03:00,000 kernel[0]: Wake reason: GIGE (Network)
24/09/12 02:03:00,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
24/09/12 02:03:00,000 kernel[0]: Previous Sleep Cause: 5
24/09/12 02:03:01,004 hidd[54]: MultitouchHID: device bootloaded
24/09/12 02:03:01,000 kernel[0]: AppleBCM5701::selectMedium - autoselect, any duplex, flow control allowed
24/09/12 02:03:01,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
24/09/12 02:03:01,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Wake reason GIGE - bonjour - service connect
24/09/12 02:03:01,141 configd[18]: network changed: v4(en0-:192.168.0.100) v6(en0-:fe80::224:d4ff:feb4:22f1) DNS- Proxy- SMB
24/09/12 02:03:01,146 mDNSResponder[46]: DeregisterInterface: Frequent transitions for interface en0 (192.168.0.100)
24/09/12 02:03:02,000 kernel[0]: Graphics suppressed 1944 ms
24/09/12 02:03:02,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [79ed,2301,0de1,0300,41e1,0000]
24/09/12 02:03:02,599 configd[18]: network changed: v4(en0+:192.168.0.100) DNS+ Proxy+ SMB
24/09/12 02:03:02,607 mDNSResponder[46]: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:C62C:03FF:FE0C:F227)
24/09/12 02:03:02,608 mDNSResponder[46]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.100)
24/09/12 02:03:02,617 configd[18]: network changed: v4(en0:192.168.0.100) v6(en0+:fe80::224:d4ff:feb4:22f1) DNS! Proxy SMB
24/09/12 02:03:32,209 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fe119e220d0> Mon Sep 24 02:07:26 2012 CEST (approx)
24/09/12 02:03:32,210 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fe119e220d0> Mon Sep 24 02:07:26 2012 CEST (approx)
24/09/12 20:13:29,000 bootlog[0]: BOOT_TIME 1348510409 0
---- DAY 2 ----
24/09/12 23:24:09,000 kernel[0]: Wake reason: GIGE (Network)
24/09/12 23:24:09,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
24/09/12 23:24:09,000 kernel[0]: AirPort_Brcm43xx::checkInterfacePowerState: Check _pwrOffThreadCall!
24/09/12 23:24:09,000 kernel[0]: Previous Sleep Cause: 5
24/09/12 23:24:09,994 hidd[45]: MultitouchHID: device bootloaded
24/09/12 23:24:10,000 kernel[0]: AppleBCM5701::selectMedium - autoselect, any duplex, flow control allowed
24/09/12 23:24:10,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
24/09/12 23:24:10,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Wake reason GIGE - bonjour - service connect
24/09/12 23:24:10,000 kernel[0]: Graphics suppressed 1135 ms
24/09/12 23:24:10,154 configd[17]: network changed: v4(en0-:192.168.0.100) v6(en0-:fe80::224:d4ff:feb4:22f1) DNS- Proxy- SMB
24/09/12 23:24:10,166 mDNSResponder[37]: DeregisterInterface: Frequent transitions for interface en0 (192.168.0.100)
24/09/12 23:24:11,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [79ed,2301,0de1,0300,41e1,0000]
24/09/12 23:24:11,520 configd[17]: network changed: v4(en0+:192.168.0.100) DNS+ Proxy+ SMB
24/09/12 23:24:11,532 mDNSResponder[37]: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:C62C:03FF:FE0C:F227)
24/09/12 23:24:11,533 mDNSResponder[37]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.100)
24/09/12 23:24:11,543 configd[17]: network changed: v4(en0:192.168.0.100) v6(en0+:fe80::224:d4ff:feb4:22f1) DNS! Proxy SMB
24/09/12 23:24:40,684 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fb5d1e11910> Mon Sep 24 21:41:51 2012 CEST (approx)
24/09/12 23:24:40,684 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fb5d1e11910> Mon Sep 24 21:41:51 2012 CEST (approx)
25/09/12 19:03:47,000 bootlog[0]: BOOT_TIME 1348592627 0
---- DAY 3 ----
26/09/12 05:33:54,000 kernel[0]: Wake reason: RTC (Alarm)
26/09/12 05:33:54,000 kernel[0]: RTC: Maintenance 2012/9/26 03:33:53, sleep 2012/9/26 01:34:04
26/09/12 05:33:54,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
26/09/12 05:33:54,000 kernel[0]: AirPort_Brcm43xx::checkInterfacePowerState: Check _pwrOffThreadCall!
26/09/12 05:33:54,000 kernel[0]: Previous Sleep Cause: 5
26/09/12 05:33:54,000 kernel[0]: AppleBCM5701::selectMedium - autoselect, any duplex, flow control allowed
26/09/12 05:33:55,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
26/09/12 05:33:55,175 hidd[46]: MultitouchHID: device bootloaded
26/09/12 05:33:56,000 kernel[0]: Graphics suppressed 2444 ms
26/09/12 05:33:56,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [79ed,2301,0de1,0300,41e1,0000]
26/09/12 05:33:56,534 configd[17]: network changed: v4(en0-:192.168.0.100) v6(en0-:fe80::224:d4ff:feb4:22f1) DNS- Proxy- SMB
26/09/12 05:33:56,645 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fafe2e16a80> Tue Sep 25 20:31:50 2012 CEST (approx)
26/09/12 05:33:56,646 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fafe2e16a80> Tue Sep 25 20:31:50 2012 CEST (approx)
26/09/12 05:33:56,686 configd[17]: network changed: v4(en0+:192.168.0.100) v6(en0+:fe80::224:d4ff:feb4:22f1) DNS+ Proxy+ SMB
26/09/12 05:34:01,000 kernel[0]: Sandbox: sandboxd(671) deny mach-lookup com.apple.coresymbolicationd
26/09/12 19:04:50,000 bootlog[0]: BOOT_TIME 1348679090 0
Any clue ?

Hi, I'm quite interested by your issue, because i get the exact same one.
On my mini (late 2012), system doesn t wake up from sleep if it has slept for more than 1 hour.
In fact I get the exact same message as you get in your console.
When I try and wake up system before the programmed maintenance wakeup, it wakes up fine.
But as soon as this programmed time has passed, it just won t wake up, I have to force switch it off via the power button and restart it.
I have nothing plugged on my mini except : AC - Thunderbolt display, and LAN connected to my freebox.
Do you still have the issue or is it ok now for you ?
I'll try in the upcoming days to plug the freebox in the thunderbolt display's adapter instead of the macmini's rj45.

Laptop P505D-S8000 went to sleep but won't wake up...

Laptop was put to sleep and now won't wake up. Power, plug & battery lights are on and power switch is lit. No hard drive activity at boot. Fans run than stop. I tried all the known tricks of removing battery & power cord, pushing power button for 60 secs, than powering up with power cord only. This seems to be the fixall for this problem when I searched the web but only seems to work for 1 out of 10 people. I have checked the screen at an angle to make sure the backlight is not out but since I am not getting activity on the hard drive I figured it was OK. I get nothing by trying to boot into setup modes, bios checks or safe mode.
Any last advice other than take it to a toshiba tech? Rick

Unfortunately that fix doesn't always work because these symptoms often represent a hardware failure.
Just to confirm, the power LED (not the AC adapter LED) does light up when you press the power button, right? If so, it does sound like you'll need to get the notebook serviced.
- Peter

HT1414 all I have is a blue screen on my 4s phone it won't do anything. can't even shut it off?

All I have is a blue screen on my 4s phone. It won't respond to anything can't even shut it off? Its been like this for over 2 hours
what do I do to fix this?

Have you tried resetting your iPhone?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Upgraded RAM MBP 2010 Boot good but won't wake up!

I orderd 8 gig's of RAM from Apple. Installed it per the instructions. Now, the MBP with Lion boots up and runs fine from off, the activity monitor aknowledges the 8 gig's. Runs well.
When I close it and then open it back up, the screen stays black and the sleep light goes out. Also, sometimes it won't boot, the light blinks and it makes a beeping noise over and over until I do a hard shutdown. Also, a couple of times, I was using it and the graphics went totally screwy and were blinking and whatnot until I did a hard shut down.
Any idea's? Can I return the memory (a shame because it is better with it when it works).
Software Mac OS X Server Lion 10.7.3 (11D50)
Graphics Intel HD Graphics 288 MB
Memory 8 GB 1067 MHz DDR3
Processor 2.53 GHz Intel Core i5
17-inch, Mid 2010

I experienced the same issue once on my late 08 Macbook Uni when I upgraded to 8GB. What I did might not apply to you but it's worth a try.
When I heard a lot of beeps on boot with nothing showing on the screen, I shut it down and opened the back and took the RAM that I installed off and slowly put it back in and made sure it was seated right.
After I've done that, everything worked fine for me.
Hope that works for you.

Won't fall asleep, but won't wake either

my parents have a powermac g4 with dual 1.25 processors, 2 gigs of ram, and tiger 10.3.9. recently it has developed a glitch when trying to put the computer asleep. when we try to put it asleep, the computer screen goes black. however, all the fans continue to run in the tower. moving the mouse which used to bring the computer back to life does nothing. there is no way to get the screen to come back to life. turning the power switch on and off on the lcd screen brings up a no input signal message. the only thing i can do when the computer is in this unresponsive mode is to hold the power switch and turn it off manually.
i have repaired disk permissions on the hard drive using disk utility. other than that i don't know what to do. other than this the computer has been working great.
we have just bought leopard for our powermac. i want to upgrade but i would like to fix this problem. if anyone has an recommendations to fix this problem i would appreciate it. also if anyone has any recommendations i should do before i upgrade i would appreciate it. i have backed up most of what we would want in case something went wrong. i'm just curious if there are things i should check or do to make sure the upgrade will go well.
thanks for the help.

I would try replacing the PRAM battery. There is old, but still relevant information here: http://www.academ.com/info/macintosh/
The usual signal of a low battery is incorrect date and time, but you can have a low battery that causes weird behaviour without seeing the date and time symptoms.

IPhone 4 Bluetooth automatically "going to sleep", won't wake up until bluetooth is cycled on/off

Hey guys,
I've had this problem for a while, but just recently it's been getting more and more frustrating.
I have an iPhone 4, and whenever I get into my car, my car will automatically search for the iphone to connect to. Now, normally this is great! Except that, after a few hours of non-use, my iPhone's bluetooth connection will require that I either A. Click on the car's bluetooth profile in the bluetooth menu to "wake up" the bluetooth (which involves the phone automatically cycling bluetooth on and off) or B. Manually turning bluetooth on and off.
Is this normal? I thought that if I left bluetooth "on" it would be waiting for a connection and would activate automatically when something was trying to pair with it. Any insight?

Anyone?

Ipad app icons shaking but won't delete, home button does not work, power off switch does not work

I just got a new ipad air and have started to add apps to it. I have added a couple of free apps which I have also deleted (moved to icloud). I have also a couple of apps (free & purchased) which I have on it now.
Now my problem:
I tried to remove another free app. I press and hold the icon. All app icons shake and display the 'x' for removing, but the 'x' for does not work on any of the icons. Also, after this, the home button does not work as the icons keep shaking even while I am pressing the button. And the power off switch on the side of the device does not work either. If I close the smart cover and reopen it shows the home display and all the icons still shaking (instead of showing the passcode sign-in display). Fortunately (well, fortune in the misfortune) if I press the home button and off switch a couple times each and close the smart cover and wait, the device awakes normally. Well, normally until I try to remove any app.
So what do I need to do to fix this?
Thanx
Brian

Glad it worked. Anytime your iPad acts up, the reboot/reset is a common first thing to try. And it clears up many issues and glitches.
enjoy your new toy

I had recently changed my email address and can get into my itunes and phone fine but icloud willnot let me log in to shut it off. It has my old password. How do I update it? It will not let me delete it out.

I had recently changed my email address. I changed it through itunes but did not through icloud because I thought it would change everywhere. Now my phone is acting up andI need to reset it to factory settings and cannot because icloud wants a password. Even though I put my old password in which is correct it still will not accept it. HELP

Hello tjcornman,
Thank you for the details of the issue you are experiencing after changing your Apple ID. I recommend the following article for an issue like this:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Thank you for using Apple Support Communities.
Best,
Sheila M.

Installer stopped at 95% and won't let me force quit, restart or turn off the computer

The flash player install manager stopped at 95% on my Mac and has been like that for a couple of days now. I can't end the installer, I can't even force quit. The installer doesn't allow me to restart or turn off the computer, because it's "still installing".
How can I solve this problem? Please help me!

Hello,
Did you tried Flash Player 11.2, Flash Player Archived : http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Use Flash Player uinstaller (http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html) to clean any instance for Flash Player.
Thanks,
Vikram

My iphone keeps saying activation required but when I do all the steps it shuts back off

help please.

Hi NDS233,
I understand that you may be seeing an issue with activating your iPhone. Here is an article for you that will help you accomplish this goal:
Get help activating your iPhone - Apple Support
http://support.apple.com/en-us/HT201407
Take care, and thanks for visiting the Apple Support Communities.
-Braden

M70-160: won't wake up from hibernate or standby - software or hardware?

I just got maaaaaan!!
works fine, but won't wake up from hibernate or standbye !! unless yur gonna wait for awhile!! 15min or something like that!!
After that it will wake and work normally !
I thought it's overheating problem but now just power it on and when the toshiba logo appear if you turn it off, it won't power on again, but after 15min it WILL !!!
so it's not a heating problem !!
It does that even without HD on it !!
at first it was hibernate and standby problem, now it dose the same with shutdown !!
what can I do!!
i just bought it guys !! ASP is to far a way !!
is there anyway i can do to fix it !!
i do fix PCs alot but not notebooks !!

thank you for your help and the fast replay, i really really appreciate it.
I'll explain the problem in details, right after hibernate or standby IF you press power button the led goes blue, fan starts, HD led lights, battery led, power adapter led (if its connected), and cd player make sound as if it looking for a CD, and THEN fan stopped, HD led goes off, no sound of CD, leaves u only with power button led ON, a nice frustrating Blue
after waiting, u eventually gave up, turn it off by along press on power button, and then no matter wut u do, simply won't start only same sounds and leds as mentioned previously, nothing on the screen as if its dead !! no logo no nothing.
give it a time ( about 15min with battery connected, or 5min or less with battery out) Press the power Button, THERE U GO, works perfectly !!
same case with shutdown but not always as hibernate and standby (though once it did wakeup from standby!!), but most of the time after shutdown u have to wait 15min!!
no USB flash memory connected or anything else !
i did install winXP pro SP2 on it and installed the drivers and Microsoft HOT fixes also, but problem remains.
i also did recovery from the recovery CD that comes with it, also no good !!
i noticed that if u disconnected the battery the unit needs shorter time to be able to wake up or boot. about 5 min.
wut kills me is that the unit works perfectly and i like it !!! i only got this issue with it !!
so wut i need to know is this: Is there anyway to make sure weather if its a software problem or a hardware problem?
its not easy to go to the local service cuz its in another city!! i need to try first wutever it takes to fix it on my own!
thank you for your time!

Mac air goes into sleep won't wake

MacBook Air goes to sleep as normal, but won't wake up now.

A new mini is on the way & I'm researching UPS's. A question that I now have is -
The new mini will have 10.5 which will be nice, but I really want to put my old hard drive straight into the new unit so I can have my old computer back the way I like it. Right now I have my external drive with everything on it plugged into my wifes macbook, & I can access everything except my email. The old emails are there in the folders, but as numbered icons, & I can't find anything. With my business I often have to refer back to old emails, & right now it's really hard to. I have tried to import them into mail, but it says it doesn't recognize them.
If I do this, can I put the new backup discs in & load leopard onto the old hard drive without loosing my old information & setup? We are on a very slow dial-up here, so I've never been able to accept the automatic updates. I look forward your advice.

Hp DV7 Hibernates but won't wake backup forceing me to shut it off on reboot it goes to reapir

Similar Messages

Maybe you are looking for