HP DV7 laptop, cant listen and talk from 2 usb headsets at the same time??

Hi,
I am trying to use two usb headsets at the same time as my wife and I are doing an online course, but can onle use either one at onc, not both?? Has anyone got any ideas?
Thanks, Matt

Hello Mattynsavvy, welcome to the HP Forums.
It appears that you're trying to use two headphones from your notebook to do an online course.
The way that you're trying to do this probably won't work. The notebook itself only has one sound card. This card can only output audio to one device at a time. So if you have both USB headsets into ports. Only one will have sound. Just like how the headset cuts off the speakers. You would need a second sound card, or to be using speakers or another computer.
The only thing I could think of that may accomplish what you're trying is to use the audio/mic jacks on the notebook specifically with a splitter. This may allow the sound to be direct to two headsets. I can not say for certain if this will work or not.
I was able to find a few YouTube videos with various ways to achieve what you're trying to do, but as they run with 3rd party software attempting those suggestions would be completely up to you.
I hope this helps.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Similar Messages

  • Can an Airport extend a wireless network and support a USB printer at the same time?

    Can an Airport extend a wireless network and support a USB printer at the same time?

    Yes, if the AirPort Express is extending the wireless signal produced by another Apple router. The Express cannot wirelessly extend a network produced by a non-Apple router.
    In addition to extending the network and connecting a printer, AirPlay can also be enabled on the AirPort Express, with all services operating simultaneously.
    Please note that only the print function will work if you connect an All-in-One type device to the USB port on the Express. Advanced features like copy, scan, mainentance, etc are not supported when an All-in-One device is connected to the USB port on an AirPort router.

  • Charging and outputting from i pad at the same time

    I am using I pad Air to connect to Garmin heads up display for navigation. However when it outputs the data to the heads up display it does not charge. Is there a solution for this

    Hmm. It looks like Garmin expected the HUD to be used with an iPhone, not a power-hungry iPad Air. The Garmin HUD comes with a passthrough USB 2.1A charger rated at  5V. The iPad Air requires 12V.
    If you were not running anything on the iPad, you might get a trickle charge on an Air with a 5V charger - really, very little charge at all if any. But navigation is pretty intensive. You will not be able to charge with that. If you have a second cigareet lighter adapter in your vehicle, you can get an auto charger designed specifically for the iPad Air. Or consider an external batter pack - again made specifically for the iPad Air.

  • If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?

    If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?
    for instance Keynote?

    Welcome to the Apple community.
    The Apple TV cannot display keynote presentations or websites from the computer. It can display them via mirroring from the iPad 2 or better or the iPhone 4S.
    You cannot AirPlay to 2 Apple TV 2's at the same time from an iOS device. You can watch the same video, TV show or listen to the same music from your iTunes library on multiple Apple TV's at the same time.

  • How to open and save pictures from 1 folder at the same time?

    Is there a way to open and save pictures from 1 folder at the same time?
    I'm creating a vi that resizes the picture but I want to do it with 1 folder at a time... Is this possible?
    greetings!

    Hi Kway,
    Here you are. I wrote a file a customer times ago & It did what you want!
    Just see the attachements and keep me inform.
    Regards,
    Julien Roland - District Sales Manager
    NI Belgium - Technical Support
    Don't forget to rate a good answer
    Attachments:
    Test existing Files.vi ‏23 KB
    Delete files from array of files (SubVI).vi ‏16 KB

  • Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
    GB

  • How do I remove the application from your iPad at the same time and with the clouds?

    Hello,
    how can I remove the application from your iPad at the same time and with the clouds?
    I know you press the app icon until it starts shaking, then press the black cross in the upper left corner. This will remove it.
    But still I will come in to the store as a bookmark Purchated I see it with the symbol of a cloud. And I would like to remove it for good. Under iOS 5.1.1 somehow I managed to do that (at least hide it). In iOS 6 I can not do that.
    I greet

    The only transition you can add this way is default cross dissolve. If the images are in the timeline, move the playhead to the beginning of the images, select them all, and drag from the timeline to the canvas to overwrite with transition.

  • Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time.  She wants I.O.S. 8 removed.  How do I remove it from both devices?  I am willing to resort to my old IOS7.1.2.

    Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time.  She wants I.O.S. 8 removed.  How do I remove it from both devices?  I am willing to resort to my old IOS7.1.2.

    Sorry...downgrading is not supported.

  • I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

    i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • How do I view multiple images from different projects at the same time?

    Hello
    I've been trying to find the answer in the user manual, but no luck so far.
    I did find how to open 2 projects at once, but I can only see one image at a time in the viewer and I have to keep going back and forth between projects to compare images. (These are scans of old photos and I want to eliminate the ones that are poorer quality, so need to compare numerous images from 2 sets of scans)
    How can I view an image from one project at the same time as an image from another? I know that it can be done in the same project by apple-clicking the second, third etc image, but this doesn't work if the images are from different projects.
    Thank you
    Elizabeth

    Thank you again Tony
    I've now created an album, independent of the projects, and dragged test images into it and it does just the job I needed. Now i just need to keep my brain sorted with which ones are which while i'm working
    Elizabeth

  • Clipping an image from various places at the same time

    Hi,
    I am trying to clip an image from various places at the same time. Is it possible to do it?
    Right now I am in this phase:
      g2D.clipRect(x, y, screen.getWidth() - 40, screen.getHeight() - 40);
                        g2D.drawImage(planet, null, 0, 0);The x and y of the clipRect method I want them to be different each time but it is only taking the first clip.

    You can make an Area from a Shape (like rectangle) and then add other clipping elements to that

  • How to play stereo mix music and sing in my mic at the same time?

    Hi guys, need help regarding Realtek HD audio driver
    I want to play stereo mix music and sing in my mic at the same time.... not for recording purposes but in chatroom let's say.
    I'm using XP...Toshiba Satellite S4747 laptop
    In the Realtek software under " Realtek HD audio input" I have mic and stereo mix both.... but I can only select one at a time.....
    Any solutions plzzz thxxxx
    On a different note.... a friend of mine whose using one non-Toshiba laptop with win XP has an older version of the Realtek audio driver and can select both mic and stereo mix at the same time... I downloaded that version into my laptop but I still can only select one at a time....

    Check the audio settings in Windows and dont forget in Realtek HD audio manager. You can find it in control panel.
    I think your microphone is set to mute so check this.

  • SCXI 1112 and 1302 doesn't run at the same time

    Hi,
    I have SCXI 1112 thermocouple input module,  SCXI 1180 feedthrough panel , and a SCXI 1302 terminal block connected SCXI 1000 chassis with SCXI 1349 adapter. I am trying to measure voltage by using SCXI 1180&1302, and temperature by 1112 module at the same time. When  chassis is on SCXI 1112 runs without a problem; however, voltage reading coming through SCXI 1349 makes no sense (plus I can't run them at the same time, LAbview gives an error). While the chassis' power is off, it is the other way around, SCXI 1349 runs smoothly.
    In addition to that, a radiometer, connected to a power supply, is wired to SCXI 1302 terminal block. When power supply is on, SCXI 1112 module's temperature reading is 4 times higher than actual value. In other words, power supply effects the readings.
    Could you please give me some advice to solve this problem?
    Thanks,
    Azra

    One piece of the puzzle you left out is the DAQ card being used in the host computer. 
    Without looking at some specifics on the SCXI cards/connectors you are using, I will comment you must be careful when you are using an 1180 feedthrough module.  Keep in mind, the SCXI chassis is Signal Conditioning -- it's nothing without the DAQ. 
    I would recommend you back up a few steps, simplify the setup and test each input channel from MAX -- making sure you aren't overlapping channels between the 1180 to the DAQ and the SCXI chassis.  Remember, most data from the SCXI chassis comes in on a single channel of the DAQ through the 1349.
    Hope this might help. 
    RS

  • New IPhone and Ipad air are ringing at the same time...

    New IPhone and Ipad air are ringing at the same time, from incoming landline/mobile phones. Help please...

    That's a new feature introduced in iOS 8 called Handoff. You can start something on your iPhone and finish it on your iPad or Mac. You can make the iPad stop ringing by going to Settings>FaceTime on the iPhone and toggling off iPhone Mobile Calls. You can do it on the iPad also.

  • I have installed itunes 11.0.2.26. When I delete a file or podcast I am not being prompted to delete the file from its folder at the same time.

    I have installed itunes 11.0.2.26. When I delete a file or podcast I am not being prompted to delete the file from its folder at the same time. How do I restore this facility? I am running a 64bit Windows 7 OS

    Is the media files in question in the iTunes library or elsewhere on the computer?

Maybe you are looking for