HP dv7 laptop computer windows 7 64 bit sound issues

how do I fix garbled sound on on HP dv7 laptop computer. I checked the drivers and they are updated. The sound comes from IDT high def Audio codec. It also has Beats

You're very welcome.
You do have a point, and I agree wholeheartedly.
I'm sure folks have brought this up in the past, but I don't know why HP doesn't provide some official presence on these forums.
Sometimes some of the HP employee forum members will do things like get driver pages added for models with no support pages, but I have rarely if ever, seen where an HP volunteer forum member takes a techinical issue and "runs it up the flagpole," as it were.
Have you tried this driver (6.10.6365.0 (11 Nov 2011)?
It's a newer version of the one on your notebook's support and driver page.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...
I hope you can get the issue sorted out.
Paul

Similar Messages

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

I have a sony laptop with windows 7 (64 bit) which I upgraded to windows 8 64 bit. But the machine had to be formatted and this time loaded windows 8 32 bit. Now I have tried itunes for 32bit win 8 as well as for 64bit win 8 but none is getting installed

I have a sony laptop with window 7 64 bit initially which I upgraded to windows 8 64 bit. But due to formatting later, I had to reinstall the windows and this time I installed windows 8 32 bit. Now I have tried installing iTunes for 64 bit windows 8 as well as 32 bit Windows 8 but none of them is getting installed. The message I get is, "this programme is not compatible for your pc" (or words to that affect since I dont remember the exact words but this is the meaning).
Can some body send me the link to the right file please. I need iTunes to transfer files from my iPod and iPhone to my laptop.
Regards

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W.

HP FQ834UT USB Universal Docking Station software won't work on my HP laptop with Windows 7 64 bit

I am using Windows 7 and when i went to load software for my docking station, HP FQ834UT USB Universal Docking Station, it said it couldn't use the driver. Is there a software upgrade to allow this driver to work on a HP laptop with Windows 7 64 bit operating system?

I have the same issue - I have it installed on my Windows 7 64-bit machine and although it is running, it doesn't work. I am sitting here in Starbucks, which has a Verizon Wifi hotspot (actually Boingo - which is what Verizon Wi-Fi uses) and the "Connect" box does not appear. I had the same issue at an airport recently. It's one of the worse pieces of software I have had the misfortune to use. When it fails to connect, it causes the Wifi connection to drop (incompatibility with Lenovo Access Connections, maybe). I don't think that Verizon understands the meaning of "QA" and "Software Testing".

Install Failed for HP Laserjet 1200 Series in new Laptop with Windows 8, 64 Bit

Product Name - HP Laserjet 1200 Series, PCL 6 Driver
Operating System: Windows 8 Home Edition, 64 bit
Error Message : Can't find the 1200 Series on the Network. To locate manually click ok ....
Changes Made - This is an installation on new laptop, running Windows 8, 64 bit
Description:
1. Installing to an existing network, that consistedof a desktop and two wireless laptops.
2. Both Laptops have Windows 7, 64 bit. Above named printer is successfully accessed from the laptops.
3. Am replacing one of the laptops with the Windows 8 64 bit.
4. The Series 1200 path is: Wireless Printer to Router, Router to Desktop via ethernet, Desktop to Printer via cable.
5. The wireless printer configuration is
        Name: HP Laserjet 1200 Series PCL 5
        Port: \\Central\HPLaserj
       Printer: HP Laserjet 1200 Series PCL 5
      Driver: HPMCPM25.GPD   5.8.2008
Problem
Unable to recreate this path with the Windows 8, 64 bit configuration.
a. When I attempt to download a current driver always wind up with a file entitled UPD-pcl6-x64-5.6.0.14430
     This appears to be a universal PCL 6 printer driver, Can successfully unzip the file and create a folder
b. During installation I can see the the desktop printer ICON (name:\\central\HPLaserj); so far, so good
c. Process fails to locate a driver and instructs to manually locate.
d. Browsing to the HP Universal Driver Folders fails because a driver cannot be found .
e. Attempting to manuall enter fails because you cannot input the above address (\\central\HPlaserj). Can only enter HPLaserj for the address, which obviously does not work.
f. When the installation did show a list of drivers, the only one I found was a universal PCL 6, which is what I thought I was trying to download originally.
This set up worked successfully with the Windows 7 64 bit. It appears I need help from a lot more expertise than I have to walk me through this set up.
This question was solved.
View Solution.

Problem Solved.
This link gives a good insight into the solution
http://www.sadjad.net/blog/2012/11/28/windows-8-shared-printer-driver/

Itunes not downloading on my computer (Windows Vista 64-bit)

I had to uninstall my itunes and download the new version on my computer (Windows Vista 64-bit) and when I click on the "download itunes now" button, it immediately says "Thankyou for downloading itunes" but it's not downloaded.Any suggestions?

See the further information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links.
tt2

Hard drive died. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Hard drive died. Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks

Error showing when attempting to install LabVIEW2009 on my computer (windows XP 32 bit)

When trying to install LabVIEW2009 on my computer (windows XP 32 bit) I get the following error: The instruction at "0x005466a9" referenced memory at "0x00000000". The memory could not be "read".
Has anyone any ideas why this is error is appearing?
Thanks.
Solved!
Go to Solution.
Attachments:
labview error.JPG ‏138 KB

Hi Richard,
After uninstalling all National Instruments software, can you check your registry for any "National Instruments" registry keys? You will need to manually delete these keys before trying to install LabVIEW 2009 again.
To open registry, go to Start and select Run. You will then need to type "regedit" in the window and click "OK".
Kind regards,
Marshall B
Applications Engineer
National Instruments UK & Ireland

I cannot sync to itunes on my computer (Windows Vista 32 bit) with my mini conected.

I cannot sync to itunes on my computer (Windows Vista 32 bit) with my mini connected. What should I do?
My Mini will not boot up. I tried holding both buttons down. I got a "connect to itunes" message. I connected. and nothing happens.

Hello there Chess-ster,
If I understand correctly your iPad mini is not being recognized in iTunes on your Windows Vista PC. I would recommend you use the troubleshooting in the following article:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Start with these steps and work your way down as needed:
Restart
Turn off your computer and your iOS device, then turn them on again.
Update your computer
Check to make sure that you've installed all required updates for your computer.
Update iTunes
Check that you have the latest version of iTunes installed on your computer.
Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Help, hotsync palm treo 755p to my laptop with windows vista 64 bit.

I am computer unsavy and could use some help. I have a palm treo 755p that previously synced with my old dell laptop. That computer broke, and I got a new HP with windows vista 64 bit. Previously, the dell was running windows xp. I have bought some new software, which I have downloaded to my laptop, and am trying to sync my palm to the new computer so that I can download the program to the computer. However, after installing the Palm Hotsync Manager and other software, and when I trying to sync, the computer does not seem to recognized my palm, and times out after a while stating "the connection between your handheld computer and the desktop could not be established. Please check your setup and try again.
Post relates to: Treo 755p (Sprint)

Palm OS devices will only sync to 64bit through Bluetooth. We have a stickie concerning this. It's the third topic down under windows hotsync. Does your computer have Bluetooth?
Post relates to: None
Message Edited by legendeld on 11-19-2008 07:36 AM

I hear no sound from my hp dv7 laptop after windows update

And, in all of a sudden, i have no sound at my hp laptop, right after I updated my windows vista. I tried the ''system restore'' solution, but it did not solve the problem. I cant even play the test sound, because I see the error message : ''failed to play test tone''.
My model number is dv7-2030eV and my product number is NQ560EA#B1A. My operating system is windows vista 32-bit.
Any help is appreciated. Thank you in andvance and Happy Holidays!

Hi diboz. "enlightlanka" made a good point, a driver reinstall would be a good step. If reinstalling doesn't resolve this issue, here are some more steps you can try.
Resolving No Sound or Audio Problems (Windows Vista)
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00833257&tmp_task=solveCategory&cc=us&dlc=en&lc...
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Reinstalling HP B210 Printer on Laptop OS: Windows 7 64 bits

Hello,
Pc:HP Pavilion DV7 Notebook PC Windows 7 Home premium 64 bits SP1
I also have problem with reinstalling my HP photosmart B210 (network)...
I few days ago after update HP Support Assistant I lose the option of active my scan to PC.
I uninstall SW printer B210... and cannot reinstall it (using my CD) WIFI connexion . Can only install USB connexion
Using SW PSB210_1315 Installing is crashing .. only info: Internal error !!
I have also 2 other PC
1 running Windows 8 32 bits .. installing PSB210_1315 without error
1 running Windows XP installing PSB210_1315 without error
I can using my printer for ePrint !!!
Using installation SW from CD intenting connexion WIFI I see my printer with the right address... but connexion always failled...
I used ccleaner to clean my PC used also sfc... no error...
I think there is somthing... what NOT allow to realize WIFI connexion from PC to printer...
thank's for any HELP
This question was solved.
View Solution.

HI,
In my first message I tall that I install printer without problem on 2 others PC's !!!
Hello,
Pc:HP Pavilion DV7 Notebook PC Windows 7 Home premium 64 bits SP1
I also have problem with reinstalling my HP photosmart B210 (network)...
I few days ago after update HP Support Assistant I lose the option of active my scan to PC.
I uninstall SW printer B210... and cannot reinstall it (using my CD) WIFI connexion . Can only install USB connexion
Using SW PSB210_1315 Installing is crashing .. only info: Internal error !!
I have also 2 other PC
1 running Windows 8 32 bits .. installing PSB210_1315 without error
1 running Windows XP installing PSB210_1315 without error
I can using my printer for ePrint !!!
regards
guy

Networked HP K5400 printing everything backwards, server computer Windows Vista 32-bit Ultimate

Our networked HP K5400 printer has just started printing everything backwards, (word, notepad, Adobe reader, web). The server computer is a Windows Vista 32-bit Ultimate.
Configuration has been working fine since we got the printer over a year ago. I do not believe there have been any recent updates or new software installed since it's been printing backwards. A new router (Cisco Linksys E4200) was added but pretty sure it was printing fine even after router added a month ago. I have checked the properties and made sure Mirror Image IS turned off.
Any other suggestions?
Thanks!
Carol

Okay, couldn't find any HP software on the server computer.
I DID however recheck all the settings and still only able to find MIRROR IMAGE set to OFF everywhere I looked..
UNTIL I clicked around and found one setting a little buried and it was set to ON.. Did a test print on something that was printing backwards and it printed correctly.
Thanks for your suggestion. When the printer gets moved to the router I'll have to recheck all the settings but until then I hope this fixes the problems.
Carol
Oh here is what I had to do.. The first part are the same directions that I found on here and other places but didn't work for me, second part is what fixed my problem.
START>CONTROL PANEL>HARDWARE AND SOUND>PRINTER
Rt. mouse CLICK on selected printer
CLICK PROPERTIES
CLICK button on bottom of GENERAL tab PRINT PREFERENCES
select OFF for MIRROR IMAGES
if that is alread set to OFF (which mine was already set to OFF)
CLICK on ADVANCED tab
CLICK on PRINTING DEFAULTS button at bottom
select OFF for MIRROR IMAGES (which mine was set to ON)
CLICK OK/APPLY to exit
test print

My HP laptop computer (windows 7) had become infected. Fortunately I'd created backups, including data. Is there a way to recover my former bookmarks from my saved data files???

My HP laptop running Windows 7 had become infected. I'd backed up data files prior to reformating and reinstalling the original software. Can you tell me the name of the file and/or folder that the bookmark info. had been stored and how to access this and import the info. into the Firefox that I've downloaded onto my newly re-formatted computer? '''bold text'''

See:
* https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile

HP dv7 laptop computer windows 7 64 bit sound issues

Similar Messages

Maybe you are looking for