HP DV7T-4100 Laptop Caps Lock not working. Windows 7 OS

I tried reinstalling the driver, and it also doesn't work in safemode. I am not real familiar with registries so I have not poked around in there.
Any help would be most appreciated!

Hello Jhal83,
Please take a look at this document and let me know if the troubleshooting steps help resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Cap Locks not working properly

I have a macbook pro running 10.6.8 & the cap lock turns on when I press the 2nd bracket key. The cap lock stays on until I press the 2nd bracket key again. It will not turn on when I press the cap lock key or shift cap lock key. I tried resetting all shortcuts in system preferences & rebooting the computer, but it is still the same. I can't use the 2nd bracket key now. Any ideas?

Try the procedures outlined here
One or more keys on the keyboard do not respond
<http://support.apple.com/kb/TS1381>
But it sounds to me like a hardware problem. You can test with an external keyboard—if the external works as expected while the built-in doesn't, it's likely a hardware fault.
I hope you're covered by AppleCare, because my bet is that you'll have to replace the keyboard. (But I've lost bets before…)

Apple full size USB keyboard - ESC, tilde, tab, & caps lock not working

I was logging into my email account yesterday & went to tab from the username to password fields & the tab key is all of a sudden not working. It was working the day before, but not now. Upon further checking, the ESC, tilde, & caps lock buttons don't work either. So ESC, tilde, tab, & caps lock are all not working now. (???)
I have the white w/ clear base full size USB wired keyboard. When I unplug & plug back in the USB cord or shut down & restart, the light on the caps lock key does come on as it should.
I have tried many of the various fixes (Universal Access, etc) that I've found online, but to no avail.
No spills or damage & I can't imagine that they all 4 would work one day & then be too dirty to just not work the next.
Any ideas to resolve???

All on the left side of the keyboard - might be a circuit board issue. But try deep cleaning that side of the keyboard. I have used a vacuum cleaner with a sock over the nozzle. (Keys do sometimes come loose - the sock keeps them from being sucked into the vacuum.)

Caps Lock Not Working...Really

Yes, I know that I need to enable Caps Lock in Settings. And yes I know that I need to double-tap the shift key and that if it is enabled it will be outlined in blue to indicate that it's on.
But, my caps lock feature will not activate. It worked briefly on the first day, but hasn't worked since. I've turned it off and on several times and tried to get it to activate. Nothing.
Any other suggestions? Maybe the key is bad?

I reset the settings, and now it works.
I didn't completely reset the iPhone (which would have erased all my data).
All that said, I'm also wondering if perhaps this wasn't user error on my part, still. I'm now wondering if I wasn't double-tapping fast enough. I've figured out that the taps have to come in a fairly quick succession.
Tim

Caps lock not working

I can't seem to figure out what the "caps lock" setting is used for. I assumed it was to change the shift key to a CAPS LOCK key but it doesn't do anything different wether it's on or off. Is this a bug or a non-feature? Anyone get it to work?

rtln,
When the Caps lock feature is enabled, double tapping the shift key will put it in caps lock. This is documented on Page 21 of the current revision of the iPhone User's Guide at this link:
http://manuals.info.apple.com/en/iPhoneUserGuide.pdf
The User's Guide has been updated periodically when firmware updates are released, and so that page number may vary in the future. It may also vary if the User's Guide is in a different language.
Hope this helps,
Nathan C.

M key/caps lock not working

Hello. I've had my Macbook since December 2007. Since day one, I have to press harder on both my M key and my caps lock key to get them to work. I can press pretty lightly on all my other keys and they work just fine, but I practically have to slam my fingers down on these two keys. The only option that support gave me was to visit an Apple Store. However, the closest one is two hours away. Is there anything else I can do to fix this? Why can't I just send it in?
Thanks.

OPPs
Message was edited by: collegeperson

K1 -- CAPS LOCK not working after BIOS flash

My K1 had to be shipped back to Lenovo for BIOS failure and upon getting the unit back I've noticed the Android keyboard is different, and won't accept a caps lock instruction (?). What's up?
Product = K1 IDEAPAD / Born = September 16, 2011 / Sex = Android 3.1 / Skill with Android = None / Skill with Wi-Fi = None
Solved!
Go to Solution.

SOLVED! The technicians apparently switched my keyboard to the Lenovo version I don't like it AT ALL! Horrible keyboard. As for the correct time, I had to go in and reset my TIME ZONE. Problems solved.
Product = K1 IDEAPAD / Born = September 16, 2011 / Sex = Android 3.1 / Skill with Android = None / Skill with Wi-Fi = None

My iMac is only several weeks old and the light on caps lock stopped working any advice?

My iMac is only several weeks old and the light on caps lock stopped working any advice?

Hi
Does the Caps lock still work, just not the LED?
Or does the caps lock not work at all? You usually have to hold the caps button for 1-2 seconds.
If the key is indeed faulty, then you should contact Apple, or go to an Apple Retail Store, or Service Provider to have the keyboard replaced

Caps lock not proper work in key bord

sir ,
caps lock not proper work in key bord .

Hello @bikaner121,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the Cap Locks is not working properly on your keyboard. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Apple numeric keypad keyboard caps LED not working...

Hi,
I am using numeric keypad(wired one) with my iMac, suddenly, when i switched on the machine in evening and tried tap the CAPS key and it doesn't light up but the caps lock is working perfectly fine.
I saw many posts regarding this on Apple discussions, but, none of them has worked for me.
Sometimes, i use this keyboard with Windows 7 also it is not working for that too. I tried with many other PCs including Windows or Mac but, didn't worked.
I discovered that Apple is providing protection against accidently CAPS lock with new manufactured keyboards, i bought my iMac 15 days back.
My entire work in on Mac and on the application i used to work on, i need to enter the password at almost 4 locations and with out knowing that CAPS lock is on or off, really taking a lot of time.
Can any body suggest that the problem is with the LED Bulb or what? or this a manufacturing fault? or i need to go for a new keyboard?
Your comments are really appreciated in this regard.
Regards,
MacLover

Hi, my first suspect would be a bad Keyboard.
Open System Preferences>Keyboard>Modifier keys, is Caps Lock set to No Action?
Open Keyboard Veiwer in Sys Prefs>International or Languages, do the letters switch to upper case when Caps Lock is pressed?

The built-in mic in g50 122ca laptop model is not working. please help me out.

the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)

here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report".

I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help!

I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help! Any suggestions for fixing this?

Did you ever get a solution to your problem? Because I am having the same problem. I was actually in the middle of using Word when the keyboard stopped working. But it works in other apps, including in Excel.
Thing is that my laptop just got back from Apple for repairs and they replaced everything but the display - including the hard drive.
So not only do I have plenty of hard drive space, but it should be virus and error free otherwise.
I have only installed a few programs and redownloaded some of my files from places like Dropbox, but otherwise is essentially a new system.
Oh - and it came with Yosemite, so I did not upgrade to Yosemite and still Word doesn't work.
I've always had trouble getting Word to play nice with my Mac but that was also with the old, full hard drive.
This is a fresh install. And since I lost all my files, I only had like 1 old file I have downloaded from email and accessed and was in the process of
creating a new file when it crashed. I got no error, the keyboard just stopped working (to type). I also cannot even get Word > Preferences to even open,
so it is completely unresponsive.
I did a Google search and under the Microsoft communities two suggestions to that person were that there may be multiple copies installed -
I have only the one - and that one is in the wrong place - again, I only have the one and it installed to the Hard drive (visible in Launchpad / Apps).
Another suggestion was that there was some problem with the updates. I ran updates and they installed fine. That helper suggested that the user
may have had different updates that worked for the other Office apps (Excel, PPT etc.) but not Word and that was at least part, if not all of his problem,
but all my Office apps show the same update version 12.3.6, so that cannot be the issue with me.
I've not yet tried uninstalling and reinstalling, but as I got no errors on the original install or updates, I'm not sure if that would fix it.
I've found that Mac just doesn't play nice with some programs at all.
And even though I have a factory installed version of Yosemite on a new, fresh hard drive, even when I booted up, my iPhoto app (which is empty) crashed. I am not sure if my iPhone or iPad was charging at the time, but I don't think so. iPhoto that I still have not even used has crashed several more times since, most notably when plugging in my iPhone / iPad to charge, namely when I declined to upload photos (by default) to DropBox. That may not be related at all, but thus far seems the only other problem I have encountered until this Word problem.
I'm on a MacBook Pro, Sept. 2009, running OS X Yosemite 10.10.1 factory installed from Apple repairs running Office: 2008 for Mac (Home and Student edition).
Please advise if you found a resolution and what it was.
Thanks

Plz after synch with laptop the apps not working well

plz after synch with laptop the apps not working well

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

Hp 430 laptop touchpad is not working afternet connecting rj-45 cable

hp 430 laptop touchpad is not working after connecting rj-45 cable, Please help me.

Hello 9560030067, and welcome to the HP Forums.
I see you are having issues getting your printer to be recognized. I would be happy to help you with that!
First, I would suggest disconnecting the USB cable, and Uninstalling the Printer Software.
Once it is uninstalled, reinstall the software. Be sure not to plug the USB cable back in until the software prompts you to connect it. Also, when plugging the USB back in, I would suggest plugging it into a USB 2.0 port, not a 3.0 port.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My hP LAPTOP speakers are not working what can i do?

my hP LAPTOP speakers are not working what can i do?

Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP DV7T-4100 Laptop Caps Lock not working. Windows 7 OS

Similar Messages

Maybe you are looking for