HP Elite Notebook, SIM Card won't stay in Broadcomm slot

I have a 3 month old HP Elite Notebook with built in Broadcomm. The computer has been having trouble seeing the SIM card which required several reboots before it would recognise it again.
Occasionally the SIM card pops out of the slot by itself.
Currently the SIM card is very difficult to seat in its slot and can not be recognised by the computer.

Hello
as the computer is still under warranty, did you call the HP Support in your country asking to fix you notebook ?
Usually the WWAN Card if held in place with two screws and it cannot move. The SIM has his own slot hidden by the battery.
The battery must be installed in the computer in order to have the WWAN card enabled.
bye

Similar Messages

T-Mobile SIM card won't work with my replacement factory unlocked iPhone 5

On Saturday, my rear camera on my factory unlocked iPhone 5 stopped focusing. I took it in to my nearest Apple store and they replaced it. Problem is, now I can't get my T-Mobile SIM card to work with the replacement phone. The guys at the genius bar sent me to T-Mobile to see if a new SIM card would fix the problem, but I'm still getting an "Unsupported SIM" error when I try to activate the phone. Any insights?

Do you have information about the model no. of original purchase that is printed on the back cover ?
What is model no. of the replacement iPhone 5 ?
If T-mobile SIM worked on the original purchase and does not work on the replacement iPhone 5, they gave you a wrong model.

HT4623 My husband just did the update for his iPhone 4, his phone is frozen with the iTunes page and a usb cable across the homescreen. He's tried holding down all the buttons all at the same time. can't shut it off. popped out the sim card, won't charge

We just did the iPhone update ios 6. The screen is frozen with the iTunes logo and a picture of a USB cale across the screen. none of the buttons respond.The phone does not recognize the apple USB when connected. We tried holding all the buttons down at the same time and also removed the SIM card and reinserted.

If it's not being recognized while it's in recovery mode in your itunes, try this
plug the phone into the usb attached to the computer
hold down the home and sleep/wake button on top simultaneously until the phone's screen goes black
When the screen goes black, release your finger from the sleep/week button on top but continue holding the home button until you see a dialog on the itunes screen on your computer that says 'itunes has detected a device in recovery mode'
then say 'ok,' select 'restore,' and say 'restore and update'

Airport Card Won't Stay Connected to Internet

I recently installed an original Airport Card in my iMac DV 400 SE Slot Loading. OS 10.3.9 recognizes it and will occasionally connect to the internet using Safari. But after a minute or so it drops out and is impossible to restart the connection. It will occasionally reconnect but I don't seem to be able to duplicate the steps. Anyone had experience with this?

Try reseating the airport card by removing it and putting it back in, and while you're in there, unplug the antennae wire and plug it back in. Might just be a bad connection.

How to enable the sim card.

Hello sir, I have hp elitebook 8440p . I want to use sim card in it ,I have installed sim card in the built in slot but after that no icon or notification has appeared. I am using Windows 8 (64 bit). so kindly guide me..thanks

Hi, Did you buy the option with WWAN card ? No WWAN card the SIM card won't work. Regards.

SLI clip failure, SLI mode selector card will not stay in place

Sometime overnight, the rubber clip securing my SLI mode selector card failed, and now the card won't stay seated in the socket.
Part of the clip that seats through the motherboard broke, and now I cannot use the clip at all. Where would I obtain replacements for this piece?
-El Queso

I have a few extra ones that came with my motherboard. they were in a little plastic pouch, did you not get any included? i would call MSI and ask them to mail you some, otherwise, i would gladly mail you a few myself.
Nick

HT4623 I buy one i-phone 4S from store wingate house 93-107 shaftbury Avenue,london.W1D 5DA.tel no. 020 7851 0817 on 30/sep/2012.my problems is, I can not activate my phone because i stay in malaysia ( when i connect using sim card malaysia DIGI line) pls

I bought new i phone model 4S from 3 comunication store wingate house 93-107 shaftbury Avenue,london.W1D 5DA.tel no. 020 7851 0817 on 30/sep/2012.my problems is, I can not activate my phone because i stay in malaysia ( when i connect using the sim card of malaysia DIGI line) it does not read malaysia sim card.Pls help me, how should i use this malaysian digi sim card and deactivate this 3 comunication sim card so i can use any type of sim card in any countries.
The phone details are as follows:
Serial no : 1151NVQLIKA.
My last 6 digit no in my sim 020287.
My 3 no 07450453838
My sim no 8944200009770020287

You probably won't be able to use a Malaysian sim card in your phone. If you purchased the phone from 3, then it is probably carrier locked to 3 and it won't work with any other sim card.
Nobody here can do anything to help you. You need to contact 3, so you need to ring them or go back to the store where you purchased the phone. Not a lot you can do other than activate with the original 3 sim card in situ so that the phone will work.
You can try activating the phone with the 3 sim card and then try swapping them, but I suspect that the phone is carrier locked to 3 and you need to contact them for help. Noone else can do anything really except them.

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

I removed my battery in an attempt to insert a SIM card, obviously without knowing how to insert the SIM card. I put the battery back into place and it was already charged 100%, but it's stuck in recovery mode. I've already restored it, but it won't boot.

I was trying to insert a SIM card into my iPhone 4 without actually knowing how to do so. I assumed that I was to remove the back of the phone and find a slot for it near the battery. I removed the battery in an attempt to find a SIM slot, and was obviously unsuccessful. I put the battery back into place and screwed the phone back plate back on. Note: the battery was fully charged and the iPhone was working perfectly fine before. After screwing the iPhone back into place properly, I thought, I attempted to cut the phone on and it would not do so. I put it back on the charger, and the screen came up that says "Connect to iTunes". I obviously couldn't do so if its plugged into the wall. I plugged into the computer, connected it to iTunes, went through the Recovery mode process, and it still won't turn on. The computer says that the iPhone is in Recovery mode, but iTunes can't do anything because it has already been restored. When I disconnect it from the computer, I hold all buttons in all possible combinations, but it won't turn on at all. When I plug it into the wall, it again says to connect to iTunes. I don't know if I damaged the battery or any part within the iPhone, but I was sensitive in my approach to removing the battery and putting it back in, and there is no visible damage whatsoever. I am extremely frustrated and in desperate need of Apple-Pro help.

do you have a cdma iphone 4? becauase cdma iphones dont have a sim card slot... the providers that use cdma technology here in the us would be verizion, sprint, criket, ect... if you want to use your iphone 4 on att or tmobile (gsm carriers). then you would need a gsm iphone 4 (has sim card slot). a gsm iphone 4 is different than a cdma iphone 4 (they have different radio chips). maby you missed the sim card slot? sim card slot would be on the side of the phone.. never inside (unless it has a removable back cover like the galaxy s3 or s4), if you dont see a sim card slot on the side of the phone than you have a cmda iphone 4. can you tell me what carrier you are trying to use?

HT5163 I turned my iphone off when visiting the doctor's surgery and now it won't turn back on. It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens. I have taken out and replaced the sim card too. Any sugg

I turned my iphone off when visiting the doctor's surgery and now it won't turn back on. It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens. I have taken out and replaced the sim card too. Any suggestions

If wjosten's tip doesn't work try plugging it into a USB charger (not through your computer), wait about 30 seconds and it should come on. If it doesn't remove the cord from the phone and keep trying this. I've had this same issue and found a combination of the reset & charging cable tends to work. Sometimes it takes about 5 minutes for the phone to respond.
Best of luck.

HT4623 I bought an iPhone 3GS from eBay all was fine until I had to restore software and now it won't activate I've been ushering a 3 SIM card but now it's just saying your phone could not be activated help plz

I bought an iPhone 3GS from eBay all was fine until I had an hardware fault I sorted that out on mp pc and now it won't activate I've been using a 3 SIM card since I have had it and it just won't activate.as far as I'm aware I bought the phone as new so no jailbreak can any1 help

Your ebay purchased phone was hacked/jailbroken. You cannot get help here for jailbroken phones. Sorry.

TS1814 I have an iPhone 3GS and was trying to restore it. Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do. Any ideas on how to get it working again?? I'm dying without it!

I have an iPhone 3GS and was trying to restore it...
Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
Any ideas on how to get it working again?

This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier. It will now accept a SIM card only from that carrier.
Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking. Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing.

HT4623 after updating to iOS 6.0.1 my iphone 3s won't recognize my SIM card. i updated my phone through iTunes, what happened to my phone?

after updating to iOS 6.0.1 my iphone 3s won't recognize my SIM card. i updated my phone through iTunes, what happened to my phone?

If it now says "invalid" or "unsupported" SIM, your iPhone was almost certainly hacked to unlock it from the original cell carrier and updating has now removed that hack and the iPhone has relocked back to that original carrier. You will have to contact that carrier and ask if it would be possible to get your iPhone officially unlocked.
Regards.

HT1430 have downloaded OS6, iphone now not working. Won't activate and iTunes is saying no sim card. what do i do next?

have downloaded OS6, iphone now not working. Won't activate and iTunes is saying no sim card. what do i do next?

sounds like your phone was hacked to work with your carrier. Now it is relocked to the rightful carrier. It cannot be reactivated without a SIM from that carrier.

I got an Australian Iphone 4s which I'll be using in Norway. Why won't my SIM Card validate?

I got an Iphone 4s from Australia to Norway (Northern Europe). My SIM card works, but my Iphone will not validate my SIM card. The cellphone was bought for 400 AUD. No SIM card was in the pack, so I take it it isn't locked. Why won't my Iphone 4s validate? Ask if more information is needed.
In advance, thank you for your help.

This was purchased second hand?
If so, there wouldn't be a SIM card included with a used iPhone even if the iPhone was sold as carrier locked when new which usually can include a new inactivated SIM card depending on the country.
Did the person you purchased the iPhone from say the iPhone was purchased as officially unlocked when new at the Optus store? Sounds like the answer is no or there wouldn't be a problem.

HP Elite Notebook, SIM Card won't stay in Broadcomm slot

Similar Messages

Maybe you are looking for