HP Elitebook Folio 9480m drivers missing / Device Manager PCI Device and Unknown device?

Hello all, I have already installed Windows 8.1 Pro x64 and i have on the device manager still 2 missing drivers they are  PCI Device and Unknown device??
Please see attached a printscreeen. ANy idea which drivers are missing? Thank you all

Hi: You need this driver for the PCI device... http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7089928&swItemId=ob_134503_1&swEnvOid=4158 I gave you the driver for the unknown device when you had W7 on the machine, so it is probably the same one. http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7089928&swItemId=ob_132986_1&swEnvOid=4158 If it is not that one (or you had two unknown devices at one time, and already installed the 3D driveguard driver), then it is probably this one... http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7089928&swItemId=ob_133322_1&swEnvOid=4158

Similar Messages

  • IPAD 1 problems after ios 5.1.1 update, itunes does not recognize IPAD.. I check the device manager, it identifies an unknown device (My ipad) but unable to use it.

    I am using the generation 1 IPAD.
    I recently updated my ios from ios 4 to ios 5.1.1, I did the restore after the update and all seemed fine as it was detected the first time.
    I tried connecting the IPAD again but it shows that the computer, itunes is not able to detect the IPAD.
    I checked on the device manager, it identifies an unknown device (IPAD) and says no software for the driver. I am using windows 7 on my laptop. I never had any such problem with the iso 4. Any suggestions as to how this can be solved?
    Thanks,
    Vinay

    Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
    I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
    Anything else I am missing?

  • Qosmio X770 - Sensor bar and unknown device

    Hello,
    a week after purchase I decided to replace the OEM Windows 7 Home Premium by Windows 7 Professional.
    (I am a Student and I need the Professional version). Everything works perfect except the sensor bar. With the OEM Windows it worked well but yet it is not responding anymore.
    When I open the device manager there is a unknown device. (Details: ACPI\TOS6205) I dont know what it is.
    Hopefully I have explained my problem correctly. English is not my native language...
    Thanks

    Hello
    With sensor bar you mean the illuminated buttons on your notebook, right?
    Well for these buttons you have to install Toshiba Value Added Package that you can download on Toshiba driver download page. This package contains the drivers for the illuminated buttons, FN keys, etc. so you have to install it:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    ACPI\TOS6205 must be the Bluetooth device so install the BT software from BT portal:
    http://aps2.toshiba-tro.de/bluetooth/

  • Additional SSD for HP EliteBook Folio 9480m

    Hi,
    Is it possible to add extra SSD in HP EliteBook Folio 9480m? If yes, which type of SSD will be fit?
    ///Wutt

    Here is the Service Manual:
    Manual
    See page 40 and 41. There is only room for one full-sized 2.5 inch hard drive or SSD. It can also hold an M.2 mSATA mSSD which can be used as an acceleration cache drive or as a boot/OS drive. If you look at page 1 of the Manual you can also see that an mSSD is not available if you have a Self-encrypting drive. So, for us to give advice we need to know what you have because that will determine what else you can add or how else your storage can be configured. You have a very complicated and flexible computer.
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • What is the best way to manage 5 users and 6 devices? We dont all want the same merged contacts, we dont all want the same calendar notes, music, pics etc etc.

    What is the best way to manage 5 users and 6 devices? We dont all want the same merged contacts, we dont all want the same calendar notes, music, pics etc etc.

    As long as it is pointed to iTunes it will be accessible via home sharing on Apple TV.
    http://support.apple.com/kb/HT1751?viewlocale=en_US&locale=en_US
    If these are commercial DVD's we can't comment on any conversion process.

  • Sat P105-S2036 WinVista Device Manager does not show Tbios device

    The label on the bottom of the laptop says the Model Number is PSPAOU-1W2036. I have had it for about 2 years. During this time till 2 days ago, it ran factory installed Windows XP MCE just fine. Device Manager had always showed Tbios as a device.
    During the two days starting 3 days ago, I successfully upgraded the operating system to Windows Vista Ultimate. Everything works fine except Device Manager no longer shows Tbios device.
    I am not able to find any Tbios WinVista driver at Support.Toshiba.com for all listed Satellite P105 models.
    What does Tbios do to serve what purpose?
    Is Tbios required for WinVista? If so, how may I find the driver to install.
    THANKS for an answer in advance.

    The label on the bottom of the laptop says the Model Number is PSPAOU-1W2036. I have had it for about 2 years. During this time till 2 days ago, it ran factory installed Windows XP MCE just fine. Device Manager had always showed Tbios as a device.
    During the two days starting 3 days ago, I successfully upgraded the operating system to Windows Vista Ultimate. Everything works fine except Device Manager no longer shows Tbios device.
    I am not able to find any Tbios WinVista driver at Support.Toshiba.com for all listed Satellite P105 models.
    What does Tbios do to serve what purpose?
    Is Tbios required for WinVista? If so, how may I find the driver to install.
    THANKS for an answer in advance.

  • The recording device reported the media error: Unknown device error. (0x0C,

    Hello
    I have a problem making a DUAL LAYER DVD, i have done anothers before. But now I can't burn it.
    It's a message error.
    (The recording device reported the media error: Unknown device error. (0x0C, 0x00.))
    Next this my Mac configuration.
    Model Name: Mac Pro
    Model Identifier: MacPro3,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 3.2 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 12 MB
    Memory: 6 GB
    I have DVD STUDIO PRO 4.2.1, and in the log appears this:
    Starting DVD Build UNTITLED_DISC...
    Compiler Initializing...
    Precompiling Project UNTITLED_DISC
    Compiling VMG Information...
    Created 6 PGCs in VTSM1
    Created 8 PGCs in VMG.
    0 Menu(s) will be created...
    Compiling Menu PGCs...
    Writing VTS010.VOB
    Writing VIDEO_TS.VOB
    1 VTSs and 1 Titles will be created...
    Compiling VTS#1 (Track 1)...
    Writing VTS010.VOB
    Muxing VTS011.VOB
    Done.
    Linking VMG...
    Linking VTS#1...
    Writing VTS#1...
    Writing VMG...
    Writing Layout Info...
    Compile Completed Successfully
    Note: The file ‘UNTITLED_DISC.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Start formatting
    Formatting as Standard DVD
    Simulation mode is off
    Lossless linking is on
    Number of layers is 2
    Doing opposite track path
    Setting layer switch at sector 2053488.
    Doing side 1 of 1
    Playable in region 1,2,3,4,5,6,8
    Disc size is 12 cm
    Disc has no copyright material
    Writing ISO 9660 directories
    Writing UDF 1.02 structures
    Writing files
    The recording device reported the media error: Unknown device error. (0x0C, 0x00.)
    What should be the problem?

    There could be a few reasons, a common one is bad DVDs or a burner going bad.
    [Some threads discussing the error|http://discussions.apple.com/search.jspa?threadID=&q=Therecording+device+reported+the+media+error%3A+Unknown+device+error.+(0x0C%2C0x00.)&objID=f952&dateRange=all&userID=&numResults=15]
    You can try the [arrpoach in this thread|http://discussions.apple.com/thread.jspa?messageID=2453295&#2453295] as s start.
    Take a look at this
    Not sure which brand of DVDs you are using, but [this guide rates brands|http://www.digitalfaq.com/reviews/dvd-media.htm]
    Verbatim are usually good for me for DL.

  • The recording device reported the illegal request: Unknown device

    Has anybody any idea? I am not able to output a dvd-9 (dvd + dl). there is always the message: the recording device reported the illegal request: unknown device. The layersize is ok and the dual layer brake is set.

    I don't have the exact error message with me, but that sounds similar. I bought a new DVR-115 for my Mac Pro and put the existing DVR-112 in the bottom slot. The DVR-115 worked fine for a month or so, then started getting that or a similar error. I replaced it under warranty and soon got the same thing. Then I Googled the error message an found many people having the same problem, even people with PCs. Now I just burn with the DVR-112, not worth resolving. BUT, I could be remembering the error message incorrectly, so Google and see what you get.

  • Ipod classic 7 gen, windows 7 32bit won't install usb driver.  in device manager, exclaimation mark under other devices, it says no driver loaded.

    I have uninstalled any programs that looked starge or might be causing conflict.
    uninstalled everythign to do with itunes or apple, rebnooting and diong a fresh install.
    my older ipod works fine.
    updated intel usb chipset drivers.
    i have tried any instructinos i can find online.
    I tried updating the "ipod" driver in device manager, I point it to c:\windows\system32
    it gives me a starge message saying it can't install the mass storage device, somethign is wrong . . .  .

    Hi mycaddigo,
    Welcome to the Support Communities!
    You may have tried some, but not all of the steps outlined below:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Cheers,
    - Judy

  • CD-ROM error message in Device Manager using Vista and X61s

    My IBM portable CD-ROM has suddenly stopped working.
    The Device Manage throws up a message that reads ' - Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.
    I've tried using another CD-ROM with the same results.
    I've also tried deleting the device and re-installing, updating the river to no avail.
    Can anyone tell me haw to fix this in Windows ever life involving Vista?

    Does these help? 
    http://social.msdn.microsoft.com/Forums/en-US/windowscompatibility/thread/cbbfde77-4def-4abb-8dd0-12...
    http://barugon.wordpress.com/2008/08/01/windows-cannot-load-the-device-driver-for-this-hardware-the-...
    http://en.kioskea.net/faq/sujet-1215-driver-damaged-or-missing-code-39
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Unknown device in device manager with gx620 and win xp64

    I am having a problem with my new msi gx620 which i have installed windows xp 64 bit on. The problem is that there is an unknown device in the device manager.
    The location of the device is on Intel(R) ICH9M LPC Interface Controller - 2919
    the Device Instance ld is:
    APCI\ENE0100\4&FF861E6&0
    i have tried to install the xp drivers avalible for the gx620 here on this site but note of them seems to fix the issue.

    google lead me to this and belief ints an infra red port
    http://vip.asus.com/forum/view.aspx?board_id=3&model=X55Sv&id=20080704205520750&page=2&SLanguage=en-us

  • IOS Update via Device Manager - 2960 S and X Series Succeed, Others Fail

    Hello,
    I am doing a round of IOS updates on a small LAN with a mix of 2960, 2960S, and 2960X switches.  I have been using the built-in Device Manager, selecting the Software Upgrade option on the toolbar.  So far the 'S' and 'X' series switches have upgraded successfully.  The 2960 (WS-C2960-24TC-L) series have thus far all failed. 
    With this failing switch type I select the appropriate .tar, as usual, click the Upgrade button, and wait.  In every case the process hangs at step 1. 'Loading the tar file to the switch'.  I am trying to upgrade this failing switch type to 15.0.2-SE7.  The switches to be upgraded are currently at firmware versions ranging from 12.2.(50)SE1 to 12.2(55)SE7.
    Is anyone aware of any known issues with this series of switches that may cause IOS upgrades to hang in this fashion?
    Thank You,

    Please use [ code] tags https://bbs.archlinux.org/help.php#bbcode
    like this
    or [ quote ] tags instead of [ ins ] tags - that bright yellow if hard on the eyes.

  • I have trouble finding the drivers to install a PCI-6024E data acquisition device.

    I can't find which drivers I should get to install a PCI-6024E data acquisition device. I had NI-DAQ 7.1 and I just upgraded to version 7.2, but it still doesn't work. From what I read, this is a plug-and-play device, so, if the drivers are in my computer, Windows XP should be able to complete the installation without any problems; we have a PCI-6110, which was re-installed correctly.
    Any help would be greatly appreciated.

    Hello,
    NI-DAQ is the correct driver for the PCI-6024E and PCI-6110 devices. Since you have two devices, you should try a combination of installations to see if you can narrow down the problem to a possible damaged board.
    What I mean by this is the following:
    Install the 6110. If it works, pull the device and plug the 6024E into the same PCI slot and see if it works. If it does not, then you may want to consider calling National Instruments at 866-275-6964 and requesting a Return Material Authorization to get your device repaired. If you call in, you will probably be asked to go through a few more troubleshooting steps with an Applications Engineer to try and determine exactly what it is that might need to be repaired.
    If it does work after perfoming th
    e above test, post back to his discussion so we can troubleshoot further.
    Jared A

  • HP device manager 4.6 SP4 mass device rename

    Hello, I want to use HPDM 4.6 to rename all of our thin client (t620) devices.I have a list of MAC addresses and the names I want to assign to the devices.I can rename a single device, I can rename all devices to HP-invented names, but I see noway to mass rename using an imported list (e.g. tab-separated file).How to proceed?  Is it possible to submit tasks to HPDM using a script?  (powershell, cmd file, etc)?

    Hello RobJ2, Mass renaming devices is possible from the HPDM. 1) Create the CSV file You will need the Hostname, MAC address, Type (device model), OS, and Gateway ID in a CSV (plain text) in this format: Hostname,MAC,Type,SN,OS,GatewayIDComputer-1,008CGAD0547B,HP t520,MXL51609CY,ThinPro 5,5000570000Computer-2,008CGAD0558C,HP t520,MXL51609PR,ThinPro 5,5000570000 2) Import the CSVFrom the HPDM, File > Import Devices...Browse to path of CSV file (any CSV files in this path will be imported)Click Import The renaming will initiate immediately with no warning. A report will be generated once the process is complete. Cheers,J.

  • Not charging and unknown device

    So, here is my problem. My sister got an ipod for christmas. I hooked it up to my computer off the bat and it worked perfectly. She takes it with her to our dad's house, he plugs it in his labtop to try and charge it for her. Well it doesn't do it. So i get it back to my house and plug it in and nothing. It shows up as unknown device. I went and bought a wall recharger, it won't recharge. Right now it only comes on, when hooked up to my pc and then shuts off. I can't do anything with it right now. Any solution to this problem? My ipod which is an 80gb hooks up fine but her fourth gen. nano doesn't.

    Try the troubleshooting steps listed here http://support.apple.com/kb/TS1713
    And if I may......the pillow over your chargers IS A REALLY BAD IDEA. Sorry.....retired from the fire department and have heard too many stories about charger cords shorting out. There I'm done with my rant.

Maybe you are looking for