Hp envy 110 will not stay connected to network

I use an HP Envy 110 connected by a home wifi network, I am constantly having to add a new printer due to the origional not being available.  I do have multiple computers accessing the printer on the same home network.

Hi,
Please review the following topic and let me know if it helps
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Setting a static IP can often times resolve this issue
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Similar Messages

  • Ipod touch will not stay connected to network after trying to use scrabble

    I had a new ipod touch and purchased the scrabble app from EA games. I could not log into facebook to load my games onto the app on my touch. The ipod would send me to my home page and disconnect me from the internet. Eventually my ipod would not connect to the network at all. I called Apple and they determined that the ipod was faulty and sent me a new one. Upon receiving the new ipod I downloaded and tried to use Scrabble again not thinking that the problem was the Scrabble app from the get go. Now again my ipod will not stay connected to the network. I have deleted the Scrabble app and reset my network settings and still nothing. It will occasionally connect but I cannot do anything with the ipod. However, it will work when plugged into my computer. I have contacted EA Games with the problem and they have "escalated my issue to their expert team", but I have yet to hear anything back from them. Anyone else having similar issues and know how to resolve this?

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • Printer will not stay connected to network

    The printer will no longer stay connected to the network.  If we turn the printer off and back on again it will print but shorly after it says "The printer is not connected.  Again, turning it off and back on again will allow it to connect.  Tried uninstalling it and reinstalling, did not make a difference.   The firmware is the latest and all drivers are up to date.
    Solution??  I have two kids in college and this is becoming very frustrating.
    Thank you,
    Joanie

    Hi @jraitt , I would very much like to help you with your 6500a plus.
    Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Printer Does Not Maintain Wireless Connection.
    As a work around, if the issue persists, you could connect an Ethernet cable from the printer to the router. This will disable the wireless in the printer and possibly allow a more stable connection. If however you connect an Ethernet cable and the issue persists, we will then know the issue is not the printer at all and is the router.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My Macbook will not stay connected to the internet, while my Dell computer works fine. Why? What can I do?

    My sister and I both have Macbook Pros that will not stay connected to our internet (wifi). Our dell computers and HP computers in the household work great- but both of the Macs do not stay connected, and often say "you are not connected to the internet". I have saved our wifi name to the computer so it is registered as our home network- but it still will not work fast or stay connected for long periods of time. Is there a setting I need to change, or anything I can do? Very disappointed with how the Mac works with our wifi.

    Mac's will have trouble connecting to WEP Encrpyted and/or "hidden" / "invisible " networks.
    OpenWEP (insecure) or WPA2(AES) is the only secure standard.
    ..WiFi, Internet problems, possible solutions
    WiFi security issues, at home and WiFi hotspots
    Also make sure the date and time are current and updating to Apple's servers for your location in System Preferneces > Date and Time. Then reboot and reconnect.
    If your still having trouble after this, take both machines back to the store for a free evaluation.

  • TS1369 I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not in itunes. At this point my ipod is connected to my computer but when it finishes syncing it's no

    I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

  • IPad 3 and iPhone 5 will not stay connected to wifi although I am close to router and have strong signal

    iPad 3 and iPhone 5 will not stay connected to wifi although I am close to router and have strong signal. I have to keep joining the network or restarting devices or forgetting network and rejoining it.  As a side note my 1st gen iPhone which I upgraded to iPhone 5 yesterday always stayed connected!

    The steps to try would be to:
    1. Restore the iPhone to Factory.
    2. If that does not solve the problem replace the iPhone.
    If Verizon is offering to replace the iPhone for free under warranty I would go with that option.

  • WRT54G v.5 will not stay connected to new laptop/Windows 7 Premium

    WRT54G v.5 will not stay connected to new laptop/Windows 7 Premium. It continuously runs through a cycle of detecting, connecting, losing connection; detecting, connecting, losing connection, etc. A the router runs through this cycle, basically acting as if I have disconnected then reconnected to power to reset it, it disrupts my Internet connection to both my wired iMac and other, wireless desktop upstairs. Paid for Linksys support today and through remote access he set up a new network on my desktop (iMac). After he finished, the problem still existed. When I told him the problem hadn't been fixed,  he told me just wait for an hour or so and it should work itself out. It, of course, did not work itself out. Any ideas out there?
    Solved!
    Go to Solution.

    Never mind-I seem to have fixed the problem with a simple firmware upgrade. Funny how the Linksys support technician didn't think to ask what version of the router I have or suggest that I should try upgrading the firmware first. He was, however, quite good at trying to upsell me to a new router instead of trying to help me fix the problem I was having. Makes me want to go buy Netgear next time, thank you very much!

  • Wifi will not stay connected after Lion upgrade - help?

    I upgraded to Lion last week on my iMac and now my computer will not stay connected to wifi...  it is fine if I restart my computer, but then it looses its connection, settings when it goes in to screen saver mode - very frustrating, please help!

    This has been well discussed on another thread here: https://discussions.apple.com/thread/3191630?start=2055&tstart=0
    (There appear to be no moderators on these forums to make sure that new threads with the same topic don't get linked to a parent !?)
    Anyway... The issues appear for many to be related to a specific Airport card type & firmware version.
    I've had constant disconnect problems with my Mini since upgrading to Lion.
    My Airport card specs are:
      Card Type:                              AirPort Extreme  (0x168C, 0x86)
      Firmware Version:                    Atheros 5424: 2.1.14.9
    Connecting to my Time Capsule distributing on:
              PHY Mode:          802.11a
    The Atheros firmware version appears to be the issue depending on certain wifi network conditions.
    After some playing about today I think I've managed to force my Mini to connect on a better frequency, without having to roll back the firmware to the Snow Leopard version or mess with the Mini Airport card settings (via Terminal) by changing some settings in my router (Time Capsule).
    These are the changes I made:
    Airport Utility > Wireless > Wireless Options
    Set Radio Mode to 802.11 a/n - b/g instead of 802.11 a/n - b/g/n (Automatic)
    Set 2.4 GHz Channel to 13 instead of Automatic
    Set 5GHz Channel to 48 instead of Automatic
    My Mini now connects on:
    PHY Mode:          802.11g
    Signal / Noise:          -64 dBm / -96 dBm
    Transmit Rate:          54
    instead of previously
    PHY Mode:          802.11a
    Signal / Noise: -73 dBm / -96 dBm
    Transmit Rate: 36
    This appears now to be stable (no drops in the last 4 hours). It's a low transmit rate still, but better than before.
    The iMac is still connecting on
    PHY Mode:          802.11n
    Signal / Noise:          -69 dBm / -88 dBm
    Transmit Rate:          216
    and all is right with the world (hopefully for the long term)

  • HT4528 I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?

    I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?

    Iran uses GSM, so the iPhone 5 will work.  It is already unlocked.  Just put local Iranian SIM in phone. 

  • Iphone will not stay connected "invalid response received from the device."

    I have an older iPhone (8gb) and for some reason whenever I plug it into the usb port on my computer it will not stay connected whatsoever. Itunes freaks out, it'll come up for a little bit and then just as soon as it appeared, 'Josh's iPhone' disappears. When I say "won't stay connected" I mean you'll hear the "new usb device" sound over and over again continuously and the iPhone goes crazy too. Like it's connected, disconnecting, connecting, disconnecting, etc.. The error I get during all this madness is "itunes could not connect iPhone because it received an invalid response from the device."
    I've used this ( http://support.apple.com/kb/ts1286 ) link to no avail (yet.) I am about to restart my computer right now. If it works after that I'll just simply delete this post. But anyway it's in a usb 2.0, it's plugged directly into the computer, etc etc
    Also I'm not sure if this has anything to do with it but I put ringtones on the phone as well, I tried adding about 5 or 6 of them through itunes and it only uploaded two of them, except one of those two appears FOUR TIMES.
    Thanks in advance for anyone who can help!

    Okay, after the updates I am still having the same problem. I'll try explaining it as detailed as possible, hoping somebody has an answer because this is pretty weird to me.
    -I have 5 files, Ringtone1.m4r, Ringtone2.m4r, Ringtone3.m4r, Ringtone4.m4r and Ringtone5.m4r.
    -I add them to the "ringtones" section under "Devices"
    -ON ITUNES they show up perfectly fine. In order, and if I play them through itunes, all the ringtones are correct, just how they should be.
    -I eject iPhone, go to settings > sounds > ringtone, and under custom, what I see is:
    Ringtone1
    Ringtone1
    Ringtone1
    Ringtone1
    Ringtone1
    Why on Earth could this be?

  • Ipod will not stay connected for more then a few seconds

    I was going to update my nano this morning after downloading the newest version of software, and first off it said the firmware was corrupt. so then I restored it, and it would not restore to the new version so i used the older version. the ipod seems to work in my hand but when i connect it to my computer it will not stay connected for more then a few seconds, then it ejects its self, but itunes still shows it as being there even though the rest of the computer does not
    I have not had any issues with it since i bought it which was last june.
    any ideas?
    John

    Hi John,
    I would suggest, with your iPod disconnected, that you force your iPod into disk mode (following the instructions in this article)
    Connect your iPod to your computer.
    Then, try restoring it in iTunes while it is connected in disk mode.
    Can you successfully restore your iPod?
    If so, when the restoring and resyncing process is all complete, now update your iPod to the latest firmware.
    Any success with trying that?
    -Kylene

  • Airport express will not stay connected

    I have a new Airport Express (802.11n) and it will not stay connected to my MacBook Pro. Any suggestions?

    I have returned the Express and reinstalled my Extreme. I found a "tip" page that suggested to put a sheet of aluminum foil behind the Express to concetrate the signal inside the house. This crude idea has not solved the problem. My MacPro is a 2 GHz Intel Core i7. Any further suggestions?

  • HT1222 Since I downloaded my update my iPad will not stay connected to the wifi. Why? & how can I fix it?

    SInce I downloaded the new iOS6 update on my ipad2, it will not stay connected to my wifi. Does anyone know why or how to fix it?

    Hm, posting on this forum didn't fix it for me. 

  • My iphone 4s and my ipad both will not stay connected to wifi since the latest update ios.6

    my iphone will not stay connected to wifi since the ios 6.0 update

    Hello DickChris,
    The following article provides some useful troubleshooting steps and information that can help establish and stabilize Wi-Fi connections on your iPad.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Cheers,
    Allen

  • Will not stay connected to my home wi-fi

    My iPhone will not stay connected to my Airport Express. My iMac and PB have no problem. Where I live I do not get any other wi-fi signals.
    In the morning my phone connects...I check my mail and check a few web sites. No problem for about 5 minutes or so then I loose the connection and it switches to AT&T's Edge service. The phone will re-connect when I go to setting>wi-fi But it only stays connected for 30 seconds or so. It will say "unable to connect" and I do renew the lease.
    This has been happening for about 3 weeks now.

    Have you tried deleting the saved wireless network settings for this network from your iPhone followed by reconnecting to the network?
    If not, on your iPhone go to Settings > Wi-Fi.
    Select the right facing arrow in a blue circle icon to the right of the name of the network.
    At the top, select Forget this Network.
    This will delete the network and network settings from your iPhone.
    Follow this by selecting and reconnecting to the network.

Maybe you are looking for

  • DataSource 2LIS_02_ITM has to be replicated

    Hello , *We cannot load data to PSA (BW 7.0) with extractor 2LIS_02_ITM.* (Some changes might have occurred in R/3 due to a full SAP solution loaded. But theses changes should not have impacted BW). We launch the data package : We receive the message

  • HT1918 Apple ID for kids without providing credit card information

    I want to create an Apple ID for my 10 year old son, without providing credit card information. on the web I found a video telling that it is possible to set the payment information to "none" - but this choice does not show up in my settings

  • ORGEH ON HR LDB SELECTION SCREEN

    hello, I am using PNP LDB selection screen i am getting the results when i gave person number but i am unable to get the data for ORGANIZATIONAL UNIT (orgeh). ANY ONE PLEASE SUGGEST ME HOW TO GET THE DATA FOR ORGEH. THX IN ADVANCE MUNNA.

  • Photoshop Elements 6 edit problem

    When I try to import a picture from a file on my computer to edit,  my Photoshop Elements 6 says windows has detected a problem...searching for a solution...never does so I am unable to use the full edit. How can I fix this?

  • 9i & 10g OUI

    I've pasted a link to my question here as I posted it in 'general' by mistake. Should I use 9.2.0.8 Patch OUI to install 9.2.0.1? 9i & 10g OUI question Thanks in advance.