HP Envy 110e printer (D411a) will not install with me using Windows 8 Consumer Preview. I need help
Just pick up the new HP Envy D411a printer, i set up with my wi-fi and all was going well until i put the disk in my PC . Just to find out that my NEW printer will not work with the Windows 8 Consumer Preview . I need help with this or until UP update the new printer to work with Windows 8, which will be on the market soon. Can some one please HELP ME
Available now is print and scan capability that HP worked with Microsoft to include into Windows 8.
The Printer Install Wizard can provide you additional information:
http://h30434.www3.hp.com/t5/Windows-8-Consumer-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-...
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)
Similar Messages
-
Ipod touch will not sync with itunes using windows 7 makes everything freeze
My itouch has not been able to sync with itunes using windows 7 for a couple of days. Everything just freezes and I have to reboot my laptop. I have reinstalled itunes and deleted the backup of the ipod but nothing is working.
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?
Many thanks.
Error 7 (Windows error 127)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
CNA 6 InstallShield Wizard will not install with a JVM not found message
I ran CNA 5.5 up until last week when Java 7 71 update hit. When I tried to launch, I received JVM Not Found, that was all. So I figured it was time to install CNA 6, however during the install process I now get a pop up box stating InstallShield Wizard will not install with a JVM not found message. No other error messages, no logs, and the installation ceases. Tried installing CNA 5.8.9.1, and CNA 5.5 again, all stop at the same point with the same message. Anyone else see this issue?
When you start Network Assistant, Java determines whether the resources it needs are available. If they are not, Java displays the message Could not create Java Virtual machine, and the session ends. To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:
JVM_MAXIMUM_HEAP=1024m
Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m , and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.
If the Network Assistant InstallShield wizard fails to start, it is likely that the temporary folder location defined through the environment variables TMP and TEMP has some problem. Assigning a correct temporary folder location can fix such problems.
Source: http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html#pgfId-840748 -
Quicken 2014 delux will not install on my Dell windows 8.1 machine.
Quicken 2014 delux will not install on my Dell windows 8.1 machine. I get the error message:
this app will not run on this computer. Get another version.
is this a windows 8 problem?Hi,
Based on Quicken official website's information, Quicken 2014 is supported on Windows 8 & 8.1 32 bit and 64 bit.
Note: Quicken 2014 for Windows requires Microsoft .NET Framework version 4.0 to run.
For more information, read this article from Quicken official website:
Quicken 2014 Install Error Regarding Minimum System Requirements
https://quicken.intuit.com/support/help/downloading--installing--upgrading-and-converting/quicken-2014-install-error-regarding-minimum-system-requirements/GEN85942.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support -
Iphone 4 will not sync with itunes on Windows 7 64 bit
My iphone 4 will not sync with itunes on Windows 7 64 bit. My computer recognizes the iphone but Itunes does not. Any suggestions?
First it told me to uninstall itunes and install a windows 64 bit version which I did, the phone still won't sync
At the same time the itunes won't access the store
I've never accessed the store before or synced the phone
I live in a country without apple stores and geniuses so this is really the only way someone can help me -
Adobe Pdf Converter Print Driver Will not install
Acrobat V9.0
Vista Utimate Service Pack 1
I have not been able to print to the PDF Printer. I get the following error when I select the PDF printer.
"The 'Adobe PDF Converter' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
When I say yes and select version 8.5.0.0 printer since it is the latest version. I get a Add Printer Driver Wizard window that says. "Unable to install adobe pdf converter, Type 3 - User Mode, x86 driver. Access is denied.
I went through all the recommended steps on the web site listed below with no success.
Thanks in advance for you help.!!!!!!!!!!!!!!
Jim
Solution 1: Use a supported installation.
The following are unsupported installations, and the supported solutions:
If you install Acrobat (Professional or Standard) on a 64-bit operating system, then you may
see this error. Please update Acrobat to version 8.1 or later. You can update from within
Acrobat via the help pull-down menu, or download the updater from the following location:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.
If you install Acrobat to a shared network disk instead of a local hard disk, then the Adobe PDF
printer is not installed. Install Acrobat on a local hard disk.
TechNote Details
PRODUCTS AFFECTED:
DID THIS RESOLVE
YOUR PROBLEM?
Yes
No
300 characters
Acrobat Professional
Acrobat Standard
Acrobat 3D
TechNote
Home / Support /
Your account o Y Contact United States (Change)
Home Solutions Products Support Communities
Company Downloads Store
Error "Warning 20225..." or no Adobe PDF printer appears (Acrobat 8.0 and Acrobat 3D 8.0 on Windows)
http://kb.adobe.com/selfservice/viewContent.do?externalId=333221&sliceId=1[10/4/2008 2:04:17 PM]
If you install Acrobat to a directory with a path that contains extended ASCII or double-byte
characters, then English installations will display the error message. Install to a path that does
not contain extended ASCII or double-byte characters.
Solution 2: Ensure that the Print Spooler process is running and set to
Automatic, and then repair Acrobat.
1. Select Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Locate the service Print Spooler.
4. If the Startup Type is not Automatic, then set it to Automatic:
a. Right-click the Print Spooler.
b. Choose Properties.
c. Choose the General tab.
d. Choose Automatic in the Startup Type menu.
e. Click OK.
5. If the Print Spooler service is not running, then start it.
a. Right-click the Print Spooler line.
b. Select Start from the menu.
6. Start Acrobat, and choose Help > Detect And Repair.
Solution 3: Ensure that the Print Spooler process has no additional
dependencies.
Only the Remote Procedure Call dependency is required for Print Spooler to operate.
Additional Services can attach to the process but will interfere with restarting the service.
If the Print Spooler process has additional dependencies, then please refer to the steps
below.
To remove all services listed under "This service depends on the following system
components":
1. Choose Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Right-click Print Spooler and choose Properties.
4. Click the Dependencies tab.
5. Record services under "This service depends on the following system components" and click
OK.
Imporatnt: Remote Procedure Call is a system service and should not be removed.
6. Temporarily remove associated programs for the listed services.
7. Contact the service vendor for removal information if removal of associated software does
not remove the service.
8. Start Acrobat, and choose Help > Detect And Repair.
To disable all services listed under "The following system components depend on this
service":
1. Choose Start > SetI am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.
-
I am hoping someone can help me (new to these discussions)
I have a mac pro and I accidentally deleted my printer. I downloaded a new driver however it will not install. It unstuffed... I get the install screen but when I click on it, it does not run. It actually asked me what app I would like to choose to run it.
I have no clue what to do now. I have never had this happen Can anyone help me?
ThanksI am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.
-
Canon 5030 advanced printer drivers will not install on my hp dv6000 laptop
my company is trying to install their canon 5030 advanced printer drivers onto to dv6000 laptop so i can print at work and they will not install. there are no error messages it just won't install. i do not, cannot get a new laptop. i need to make this work. HELP
my os is xp sp2 with most recent updates installed.You would probably get better luck with your question if you post this on the HP Notebook board as this board mainly deals with hp printers and the Notebook board will help with your HP Laptop.
Good Luck !
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP. -
Photosmart C7250 will not install with Windows 7
I have bought a new computer wth Windows 7. My Photosmart C7250 will not install on this operating system wirelessly or by USB. The driver will install so that I can print only when I plug it in, but I cannot achieve full functionality. When I try to install it over the wireless network,, it gives me a fatal error (code 14116417). The printer does connect to the wireless network, though. I have uninstalled and reinstalled numerous times, and have run out of options. Any ideas, besides buying new??? I really like this printer!!! And thank you in advance!
I is likely not your printer. Here are a couple of things to check:
1. Disable your security system's firewall.
2. Reboot your router and try again.
Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
I just migrated from an older iMac G4 to a newer iMac 2GHz
Intel Core Duo. To my chagrin I then discovered that Director MX
2004 would not work on an Intel machine. So... I upgraded to
Director 11. After all the hassle of proving (once again) that I am
an academic, I received the confirmation and link so that I could
download and install the new version. Alas...! When I run the
installer, it says: "This software cannot be installed because the
file system of the OS volume is not supported." WHAT? Director 11
won't install on Mac OS 10.5.2 (Leopard), but it will on Win-doze
Vista???
HELP! I need Director! It is the prime piece of software that
I use to create programs for my classes!SujaiS: I found the problem! My hard disk was formatted
"journaled (case-sensitive)". After searching through lots of
discussions and support files, I learned that apparently several
Adobe applications will not run with that format.
I therefore had to boot from my Leopard install disk, erase
and reformat the hard disk as only "journaled' (NOT
"case-sensitive"), reinstall Leopard, then restore the contents of
the hard drive from my Time Machine backup. I have since managed to
install Director 11 just fine. It has shown some odd bugs, however.
For example, a cast member with text (using an embedded font) now
shows an exclamation mark on a following line... but there IS no
exclamation mark to delete, let alone a following line! Weird! I
tried changing to another embedded font, and the program crashed.
Hmmmm.
At any rate, I would suggest that Adobe needs to specify for
Director 11, under Mac system requirements, that "case-sensitive"
formatted hard disks will NOT work. That is a simple warning to
include. Adobe is obviously aware of that incompatibility, since it
mentions it under forums and technical issues for other programs.
Shouldn't they list that system requirement from the get-go?
Thanks for your suggestions! -
Itunes will not install correctly Error 7 Windows error 126 Problem is MSVCR 80 not found
Itunes will not install I get a error message ERROR 7 Windows error 126 When I try to open Itunes MSVCR80 Not found
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Driver for Mobile device will not install with installer
Uninstalled EVERYTHING to do with iTunes/Apple/updater. Reinstalled several times and the mobile device will not install.
I WANT MY MONEY BACK. I HAVE NO PHONE SERVICE.Hi jngs & amyjo - have u sorted problem? I'm having exactly the same problem with my nano.During first installation of software, would not recognise new hardware when connecting ipod to the pc for formatting. I've uninstalled and reinstalled using both CD that come with nano and also latest software update available on itunes...but still will not recognise hardware when nano connected to pc. Have tried with several 2.0 ports - these r all ok cause i've connected other devices to them and they work fine. I've tried connecting nano to a friend's pc - he all ready uses a ipod (not nano) - same problem "does not recognise new hardware". The usb lead is fine as the nano charges when connected to port. Am planning to take nano back to Apple store in Blue Water (outside London) nxt wk. Why is it that things don't work even when you follow instructions to the letter!!!
-
Msi object will not install with non-admin user
I've created an MSI object for the Flash 9 plugin, which installs okay
on the workstation when I login with an admin user. It will not
install when logged in with a normal user account. I have set it up as
an unsecure user and given the workstation R and F rights to the msi
object, but I'm still getting a 1603 error code.
Any suggestions?http://appdeploy.com/packages/detail.asp?id=798
You will see the ZENworks reference on this page.
I would bookmark this site :>
I almost always check it before deploying a new package to see if it is
listed. Helps me find issues before the issues find me :>
[email protected] wrote:
> I've created an MSI object for the Flash 9 plugin, which installs okay
> on the workstation when I login with an admin user. It will not
> install when logged in with a normal user account. I have set it up as
>
> an unsecure user and given the workstation R and F rights to the msi
> object, but I'm still getting a 1603 error code.
>
> Any suggestions?
>
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCN -
HP Deskjet 3920 advanced printer drivers will not install on my laptop
I can't share HP Deskjet 3920 with Win 7 64 bit cause can't install advanced printer drivers for x64 on Win XP, error message like: "need some drivers from Windows XP CD-ROM" - and can't find it there (need for sRGB.ICM file).
If I manually point this file, the install process loops endlessly.
Spoiler (Highlight to read)
Spoiler (Highlight to read)
Spoiler (Highlight to read)Hi Yaugen,
Try these instructions. The main task is to get Windows XP and Win7 to share resources.
Step one: Windows 7 Homegroup must be setup
Printer sharing must be setup in the Homegroup settings, if one of the computers in the network is using Windows 7.
1. Click Start
2. Click Control Panel
3. In the upper right corner ensure that View by has Large icons or Small icons selected.
4. Click Network and Sharing Center.
5. Click Choose homegroup and sharing options
6. If the Homegroup is not setup, you need to set up your homegroup before continuing.
Step two: Set the Workgroup on each computer
Each computer on the network must be set to the same Workgroup. The workgroup name needs to be changed from the default to a new name.
Windows XP:
1. Click Start.
2. Right click Computer and then left click Properties.
3. The default Workgroup is WORKGROUP.
4. The name of the Workgroup should be changed from the default.
5. In System Properties, click the Computer Name tab.
6. Click the Change button.
7. Enter the Workgroup name that is used by your entire network. If you are changing the Workgroup name, use the same name used in Windows 7.
8. Click OK.
9. You must restart your computer for the change to take effect.
Windows 7:
1. Click Start.
2. Right click Computer and then left click Properties.
3. The Workgroup is listed in System Properties.
4. The default Workgroup is WORKGROUP.
5. The name of the Workgroup should be changed from the default.
6. Change your Workgroup in Windows 7 by clicking Change settings.
7. Click the Change button.
8. Enter a new Workgroup name that will be used by your entire network.
9. Click OK.
10. You must restart your computer for the change to take effect.
Step three: Setup a share account on each computer in the network
Create a common share account on each of the computers, including the computer that is sharing the printer to the rest of the network. This share account must have the same name and password on each computer.
If you decide to use an existing account that appears on each computer all ready, this existing account must be password protected. If you do not want to password protect your default login, create a new share login as described in the following steps.
Windows XP
1. Click Start
2. Click Control Panel
3. Click User Accounts
4. Click Create a new account.
5. Enter the same user account name created as the share account on the Windows 7 computer.
6. Click Next.
7. Under “Pick an account type”, select ‘Computer Administrator’.
Note: In Windows XP you must select Computer Administrator in order setup a printer.
8. After you new account is created, select it under ‘pick an account to change’.
9. Click Create a password
10. Enter the same password used when creating the share account on the Windows 7 computer, following the directions on the screen.
11. Click Create Password button.
12. Log off your current user account and log into the new share account to activate it.
13. Once the computer is ready after logging into the share account, you can log off the share account and back into your regular user account.
Windows 7
1. Click Start
2. Click Control Panel
3. In the upper right corner ensure that View by has Large icons or Small icons selected.
4. Click User Accounts
5. Click Manage another account
6. Click Create a new account
7. Select Standard User
Note: The account created should be created with the lowest security setting necessary. Creating the share account as an administrator is discouraged.
8. Enter a new user account name. Use a name that is easy to remember as the account used for sharing resources across your network. For example: ‘ShareAccount’
9. After your new account is created, select it under “Choose the account you would like to change”.
10. Click Create a Password
11. Enter a new password, following the directions on the screen.
12. Click Create Password button.
13. Close any remaining opened windows, making a note of the new account name and password as you will need to create identical accounts and passwords on the other computers on your network.
14. Log off your current user account and log into the new share account to activate it.
15. Once the computer is ready after logging into the share account, you can log off the share account and back into your regular user account.
Step Four: Share the printer to the network
The computer that has the printer attached and installed by USB must have the printer shared to the network.
Windows XP
1. Open the printers and faxes folder in Windows XP.
Note: A hand symbol under the icon for the printer indicates it is already shared to the network.
2. Right click on the printer to be shared to the network.
3. Left click on Sharing.
4. Click “If you understand the security risks but want to share printers without running the wizard, click here”.
5. Select “Just enable printer sharing”.
6. Click OK.
7. Select “Share this printer”.
8. If the Share name is acceptable, click OK.
9. If you want to change the Share name, enter a new name. Click OK.
Note: If the Share name entered is longer than 8 characters, you will get a warning that the printer will not be accessible from MS-Dos computers.
Step five: Install the appropriate software for your printer
Install the printer software on the other computers on the network that will need to access the shared printer. Install the correct driver for the printer model for each computer on the network. Not all printers will need to have a driver installed, only newer printers.
1. Check for available drivers – visit the HP website and download available drivers.
Note: Even if you have an install CD for your older HP product, there may be an updated driver for your printer.
2. Launch the driver setup by double-clicking on the downloaded driver.
3. If the driver install process requires you to attach the printer USB cable to continue, click cancel instead. This will roll back the install, but it will leave the driver files installed.
4. Select the USB connection type. Look for the checkbox labeled “Connect later – Do not connect to the printer now. I will connect it later”.
Note: You might have to select USB connection type before the checkbox is visible.
5. Complete the install without attaching the USB cable.
6. After the software is installed, delete any icons created on the desktop. They will not be linked to the shared printer and will only result in errors if used.
Step six: Install the shared printer.
Note: Computers that are not sharing a resource to the network may not show up by name when viewing the entire network.
Windows 7
1. Click Start.
2. Click on Computer.
3. In the lower left pane, click on Network.
4. Double click on the computer that is sharing the printer.
5. Enter the name of your share account as the “User name”.
6. Enter the same password created for the share account.
7. Check the box labeled Remember my credentials.
8. Click OK.
9. Right click on the printer, left click Open.
10. Windows will find the previously loaded driver for the printer and complete the install.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"
Maybe you are looking for
-
Announcements Web Part -- Able To Show More Than One At a Time?
I am currently using SharePoint Online and loving it, but I have come across one item that is giving me a problem. I am working on creating a corporate intranet site and when I add the "Announcements" web part it only allows me to display one announc
-
HT4929 installing icloud on windows 7 64 bit
How can I install the icloud desktop on a Windows 7 64 bit PC?
-
Hi All, I have a reporting requirement in which I need to display the name of the vendor,its current registration status(whether its new,accepted or rejected),and the date of its registration. Plaese guide me what should I do on the modelling side. P
-
Please send to me an installation CD or DVD for I wasted enough time attempted to install Elements 13 and premier Elements 13. My operating system is windows 7 Ultimate and I have not had any problems installing Adobe Elements 8 thru 12 from CD or DV
-
There is an album on a smart playlist on my ipod that is not on the music section of my ipod. I am not synced to any computer. How do I delete this album from the playlist and presumably my computer? Thanks!