HP Envy 120 printer and Macbook Pro won't talk to each other...

Hi
I have a shiny new printer and a fairly new Macbook Pro and simply cannot get my printer to 'talk' to my Mac. 
The printer is connected to our home internet and the Internet report you can print off says everything is fine.
We have done the Apple > Software update etc to make sure the latest drivers etc are installed. (For info, we are on OS X 10.8.5). However, when we then try to print something, it comes up as no printer installed and there is no 'nearby printer' showing, which I believe should be showing there. (We have tried adding manually, too, using various settings and can't do it that way, either.)
When this didn't work, we downloaded the relevant driver from the HP site (to see if this would help, but it didn't).
 After downloading the driver, we go through the installation process and what happens is that it doesn't have our printer listed and asks that we connect our printer. When we connect it, it recognises it and we then proceed. It then says your printer is now connected and you may remove your device. When we remove it, it then does not have any device listed and we cannot progress any further. Stuck in an infinite loop...
Also, firewall and security settings are fine.
I've also restored default settings on printer etc and started over a number of times.
Any help would really be appreciated.

Kodak has drivers for up to Mac OS version 10.7 on their website here:
http://support.en.kodak.com/app/answers/detail/a_id/41686/selected/true
Did you try downloading and installing them?

Similar Messages

  • How do I set up LiveRig or TouchOSC with Mainstage 2.2.2? Both apps send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI?

    As I said before both app's send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI on the network set up, which I think I did right. I have tried MIDI Disigner and Mainstage shows MIDI activiti, what can I be doing wrong?
    Thanx in advance.

    I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
    In my experience, do not use UBE for anti-relay.

  • Printer and Touch Smart do not talk to each other

    I have a HP Touch Smart and Cannon MP810 and the wireless function will not work between them I have a belkin and the Cannon dongle but neither will work.

    Sorry it is a bluetooth not a wireless

  • CD will not eject and MacBook Pro won't restart

    CD will not eject and MacBook Pro won't restart.

    Do a SMC reset, that hopefully should get you booting and while booting, hold the option/alt and trackpad button down at the same time. Once a row of icons appears and if the disk hasn't ejected via the trackpad method, then press the eject key on the keyboard until it does.
    Click the arrow to boot up OS X.
    http://support.apple.com/kb/HT3964
    If this doesn't work, then take the machine in for service.

  • Start up Disk full and MacBook Pro won't reboot.  Only white screen but can sleep, restart, shut down.

    Start up Disk full and MacBook Pro won't reboot.  Only white screen but can sleep, restart, shut down.

    Reboot into Safe Mode (hold the shift key down at the sound of the chime, release when the progress bar appears) Safe Mode will take longer to boot than normal.

  • Full Battery and MacBook Pro won't turn on

    So I was working on my MacBook Pro making a slide show and my other computer needed some power so I unplugged my Pro and plugged it into my other computer. After about five minutes my MacBook Pro just shut down. I don't know what happened, but the power is full and when I press the power button it doesn't do anything. It's almost like the power button doesn't even work. Any help would be very appreciated!! I really need to get this slideshow done!

    I recently had a very similar problem...  Last Monday I had been using my MBP for a presentation and by the end of the presentation my battery was DEAD.  That was ok b/c I wasn't planning on doing anything else that night...  The problem came the next day when AFTER CHARGING it would still not turn on. After trying ALL DAY to get my computer to start up, I finally had my mom take it out to the Apple Store and you probably won't like the answer that I got re: my MBP...
    They said that there as a lot of dust that had gotten into it (I had had a couple of keys that had come off of my keyboard) They also said that the only way to get it working again was to do a COMPLETE & TOTAL OVERHAUL OF MY COMPUTER at a whopping cost of $1140.00 since a) my AppleCare expired in March and b) they said that there appeared to also be a little bit of OLD water damage!! 
         Because I am disabled and the only "work" that I do is volunteer for the non-profit organization that my mom & I founded (Dreams Fulfilled Through Music) I certainly don't have an extra $1140 sitting around to repair this!
         What I finally ended up doing was going to a outside authorized Apple Repair Center where they removed the HD from my MBP (that runs 10.7.4) and put it into an enclosure so that I could still access my data (since my mom has an identical MBP).  this only cost me $114 and will allow me to save up for the repairs and or replacement of my computer. 
         The problem that I ran into now is that b/c my mom is almost constantly using her computer, I had to try to start up my older MBP with the external HD from my 3yr old MBP.  Unfortunately, my older MBP only has 2.16GHz of Processor speed & 2 GB of RAM and unfortunately is only running 10.4.11!! When I plugged in the external HD, I was able to see the drive & it's contents but when I attempted to "Start Up" this laptop from that disk w/ Mac OS X 10.7.4 on it, this laptop wouldn't recognize the new version of Mac OS X and thus wouldn't start up from that disk. 
         I've just about decided that I this (now 6 yr old computer) is SIMPLY NOT CAPABLE of starting up from the HD that was taken out of my newer (3 yr old) MBP!!
    Does anyone know if this is in fact the case?
    I truly hope that this is not the case with your MBP but I figured since our experiences were SO SIMILAR that I should at least share with you what AppleCare Geniuses told me about my computer!
    I also hope that someone can also answer my question about starting up my older laptop from the newer HD. 
    Take Care
    ~ Kathryn Archuleta
    P.S. If anyone would like any more information on our 501c3 non-profit organization you can visit our web site
    http://www.dftm.org
    Message was edited by: mkscme20  (This portion got cut off when I submitted the original post) If anyone would like more information about our 501c3 non-profit organization for individuals with special needs you can visit our web site is www.dftm.org or either of our Facebook pages at: Facebook.com/dftmweb or Facebook.com/AlamoAngels

  • Pink screen and MacBook Pro won't boot

    yesterday evening I did a software update (which I do regularly), this morning I had a white and pink screen. after pushing the spacebar a few times I goy a status bar saying moving data which was almost finished (5mm left) 5 hours later I still was at that point.
    Afte rebooting the since I do have to work it boots to the point where I see an Apple and a spinning wheel. The wheel keeps spinning forever and it won't boot.
    I tried rebooting, clearing pram, nvram etc nothing helps.
    I booted with shift pressed and could chose between a number of things but on no case Internet was accessible.
    Time machine only offered to reset to last Friday ERASING all my work from the past weekend and Monday.
    Nothing else worked.
    I don't know why an upate of wifi should ruin my day and possible my week.
    I have the timemachine as last resort, but I want my macbook pro to boot decent to get to my data.
    I'm now over 10 hours wasting my time and I'm at a point I might commit a crime if I would meet the delevoper of Apple who made this update.
    Any suggestions?
    regards
    Lode

    I can connect to the Macbook Pro in target mode, but it still won't boot.
    there should be a way of fixing the OSX without losing data.
    Somebody HELP?

  • Dell printer and macbook pro

    I have a macbook pro and am trying to connect my dell V305w printer, is there anyone who knows how to add the printer to my computer?

    I've got the same printer and problem.
    You can make your Mac print on the Dell V305/V305w by attaching it via USB and install the printer with "Lexmark 3400 series" drivers.

  • ITunes and MacBook Pro won't recognize 2 gen iPod

    I'm trying to sync my 2nd gen iPod to my MacBook Pro.  It won't come up in the Finder or on iTunes.  I've done the suggestions I found online but still can't connect.  I've never had a problem before.  Any other suggestions?

    Make sure you're running the most current version of itunes. Update if you have not done so, then:
    Follow the steps here to remove & reinstall the AMDS to see if itunes will see your phone:
    http://support.apple.com/kb/HT1747
    You won't be able to do anything until itunes recognizes your phone. Once that is done, restore the phone as a "new" device in itunes. This should remove the software used to jailbreak the phone.

  • Black Loading Gear And MacBook Pro won't start

    I recently installed a third party application on my macbook pro. When i reboot i see a black loading gear and then after about 12-15 seconds my screen flashes and the gear freezes. i have tried booting in safe mode, repairing drive, PRAM reset. Really all the basics. I am now reinstalling Mavericks in hope of fixing this problem. If anyone has any sugestions please let me know. No ideas of anything involving loasing any data because i do not have any back ups of these files.

    "They asked me for $100 just to open it! Is that normal and *should I get a replacement for free?"*
    Replacement computer? Under *specific conditions* if your computer is still under its one year warranty and/or you have AppleCare.
    As for charging you $100 just to open your computer up, you should NOT be charged if its confirmed that your computer has the faulty Nvidia graphics chipset. Make a copy of the KB Article: http://support.apple.com/kb/TS2377 *MacBook Pro: Distorted video or no video* issues and take it to the repair shop.
    "Should I email apple?"
    Nope! You will not get an answer. You can call Customer Relations in your country. Not sure of the procedure in Singapore. Call Apple tech support in your country. Ask politely & firmly to be transferred over to the Customer Relations department.
    Good luck!
    !http://i50.tinypic.com/izvwo1.gif!

  • Unplugged iPhone5 and MacBook Pro won't turn on

    Downloading Indesign using hotspot from my iPhone 5 unplugged it and the computer shut off shortly after, plugged in power no response. Note I was at 74% my phone was at 16% all I did was unplug my phone and black it goes. It say 2010 on the back tried shift-control-option and power, no response. No tools to pull the back off to disconnect the battery so I'm just researching till I get home. Any thoughts?

    Hi C,
    A friend of mine unplugged his iPod without dismounting it first. Poof. End of logic board. I don't know if you need to dismount an iPhone or not, but if so, and you didn't . . . .

  • 10.5.7 and Macbook Pro won't reboot!!

    I've updated to 10.5.7 this morning and my system is just sitting here rebooting over and over. It brings up the Apple logo without the spinning wheel, sits for 5 minutes, then reboots again... just does it over and over again.
    Can anyone tell me what I might do to force it to reboot?
    Thanks,
    glenn

    This works on an MBP? Because when I hold down the shift key and press power button nothing happens. I hold and hold and it just sits there with a white screen. When I release, I get the apple that just sits forever and never moves. What is the exact procedure for doing this?
    Thanks,
    glenn

  • My iphone4s and macbook pro won't sync in through icloud, what to do?

    everytime i click on "done" after activating home sharing, the home sharing button disappears and when i connected my iphone to my laptop throught the cord then click home sharing it said that it cant be opened because an error has occured (-3150) what does that mean?

    Add it as an Outlook account, but still use your full email adress as a hotmail address.
    Use this link if needed: ssl.apple.com/support/mail-settings-lookup/

  • IPad3 and MacBook Pro won't pair

    They connect; proper codes appear on both devices; dialogue box says pairing unsuccessful, most likely to to incorrect codes?

    Hello:
    To my knowledge, BT pairing an iPad with a Mac will not work.  Look at peer-to-peer knowledge base articles provided on this web site.
    Barry

  • My Macbook pro won't connect to any other wifi except my home wifi.

    Everywhere I go , my computer wont connect to any other wifi . I'm currently visiting a friend in Florida and I tried connecting to her wifi and it says it's connect but there is no internet connection . I know her router is fine because my iPhone is running off of it perfectly but it won't let me use internet on my Mac .

    I suggest you try to join the Network at the Genius Bar of an Apple Store. Be sure to make an appointment, as they can be crazy-busy. It's free.

Maybe you are looking for

  • Adding columns in the UWL

    Hi, This is  Rajyalakshmi. I nee to add columns in the UWL . I have  changed the XML coding accordingly .and uploaded the file .but the  added columns are not appearing in the UWL. I have added the  view in the   XML file corresponding  to the backen

  • Multiple Revision Levels for a Material

    Today, Tyco Electronics has many manufacturing sites located around the world.  A given material may be manufactured in multiple locations.  When Engineering determines that a given material must change revision level, they determine a date that this

  • How do you fix a jammed lock button on an ipod touch?

    The lock button on my ipod touch mysteriously became jammed. Is there anyway to fix it?

  • Sales Office - Characteristic

    I have defined Sales Office as a Characteristic in COPA.  But in the report execution, only a few are coming in the display while others are not appearing in the report.  There are already invoices for all these sales offices.  Why this is happening

  • Software de POS que interactuen con SAP Business One

    Buenas tardes a todos, Estoy averiguando sobre software de Puntos de Venta (POS), que ya tengan la interface de interaccion con SAP Business One hecha. Tengo un cliente interesado en adquirir POS para tres de sus empresas, pero obviamente como tiene