Hp Envy 120 printer - Help! Hp Utility - Setup - can not find printer over wireless

Hi all,
I am in desperate need of help - I am running OS X 10.9.1 and have downloaded Mavericks update to support the printer.  However, during the Utility Setup, the printer can not be located by the tool.  I have also tried to manually type in the IP address and that does not work either.
Prior to 10.9.1 upgrade, everything worked fine.
please can you help?
Thanks

Hi @dBurnet1T,
Welcome to the HP Support Forums! I see you have recently upgraded to the Mavericks 10.9 Operating system and you are unable to connect your HP Envy 120 to your computer, the Mac does not see your printer.
I would like you to start here: 'Unable to Find Printer' Error Message Displays on the Computer during a Wireless Network Installati..., once on the page please select the Mac 10.8 section and follow the steps listed.
Once connected, if you find the Envy 120 is not maintaining the wireless connection, you can complete the steps listed here: Printer Does Not Maintain Wireless Connection
Please let me know the outcome, I look forward to hearing from you.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • Setup can not find a supported product...*I SERIOUSLY NEED HELP* SB-XFI

    WinXp System
    I've posted here before and no ones been able to help me with a solution..but this problem keeps occuring when I restart randomly when I get back to windows there will be no sound.
    Here's the procedure I follow which works (randomly) after 2 or 3 hours of doing this over & over & over & over again..
    Upon the sound not working I..
    1: Add/Remove programs-uninstall creative drivers
    2: Launch Driver sweeper (Guru3d) select Creative-Sound..****yse. Remove any entrys it finds.
    3: Open the setup for the SBXFI drivers (the ONLY one that will work for me) .0.0. Created /30/2009
    then Driver Uninstallation> Delete all shared Creative Audio Driver files
    4: restart and clean boot back into windows.
    5: I re-open that driver setup file and do -Driver Installation. Now most of the time it will run..wait a little bit then tell me to restart. This means it WILL NOT WORK. I know when its gonna work because it will pop up a windows caution box saying that the driver is unsigned and do I wanna continue.. I click yes and thats a sign it'll work..but that only happens after HOURS of doing this procedure..if Im lucky.
    Tonight Im on hour 2 of this rubbish and Im absolutely sick of it..can someone provide a fool proof way to make these **bleep** drivers work?!? I've tried to run almost all the other drivers out there and if I attempt that I get the "Setup can not find a supported product..." for some reason this driver Im using is the only one that works..sometimes..
    Message Edited by Wildone_06 on 05-06-2009 0:0 PM

    Thanks, its [size="" face="Arial">Sound Blaster? X-Fi? XtremeMusic.
    I got it working again around 0pm last night, after doing that procedure since 7pm. Now if its the wrong driver, it would never work..if its the right driver..it should work first time. So I have no idea why I have do this ritual and it'll eventually work after so many trys..is this software vodoo based or something!?
    The OEM drivers that came with it certainly dont work (The 'setup can not find ect ect) so its a mystery to me.

  • Can not find printer from computer hp officejet pro L7780 all in one

    I just recently tried to print and my printer can not be found I do not have the disk that came with the printer it is lost  and it keeps telling me it can not find printer 
    This question was solved.
    View Solution.

    What operating system?
    Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • MS Project Install: 'Setup can not find PrjPror.WW\PrjPrrWW.cab"

    Hi, I am trying to install MS project 2013 trial, but everytime I try to install it it gives this error:
    'Setup can not find PrjPror.WW\PrjPrrWW.cab"
    No idea how to deal with it, already tried the 64 bit version but that did not work.
    Thanks for your help
    Floris

    Does the PrjPror.WW\PrjPrrWW.cab is really in the local path now?
    If you are using installation source from DVD, please copy them to the local drive and then reinstall it.
    Try to redownload the Microsoft Project 2013 Trial from the link
    http://technet.microsoft.com/en-us/evalcenter/hh973401.aspx
    And then turn off all of security programs, reinstall it within local administrator account permission.
    Thanks.
    Tony Chen
    TechNet Community Support

  • Printer software will not finishing loading/can not find printer

    received a Canon MX922 as a present. Attempting to connect and install printer to my HP Pavilion 17 notebook.
    The software stops loading in the final 2 to 3 minutes of completion. Using printer on my wireless network.
    All messages say can not find printer!!

    Hello rewing45,
    Welcome to the HP Forums.
    I see that you are having an issue with installing your Canon printer on to your Windows 8 computer.  I see that the computer is an HP.  I suggest that you contact Canon for installation instructions.  They will troubleshoot the printer on the Operating system NOT on the make of the computer.
    Here is the link for Canon Support.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Help!! I can not find vrml api

    help!! I can not find vrml api
    I find day and hour.
    and find nothing
    who can help me
    email [email protected]
    thanks

    VRML API??
    Which do you mean?
    1) Javadoc API for old VRML Loader
    2) Javadoc API for Xj3D VRML Loader
    3) Specification for VRML
    4) Something else??
    Regards
    Nikolai

  • Setup can not find a supported product

    &Setup can not find a supported product3 I have an XFi XtremeGamer and I tried to update the console launcher and received the error that setup could not find a supported product. I have had this machine for 2 years on XP, and I used the autoupdate feature on the website. This feature found the device on my machine and listed a few updates including the console launcher. I would think if there was a problem, the autoupdate would issue some kind of error. I was able to update the driver on 2/7/08 without any problems using the autoupdate with the website, and I did install the wave studio suite yesterday with autoupdate without issues too. I have made no hardware changes to this machine. Device Manager lists the device as working properly. I do have sound from the card. I tried to download the launcher.exe package with the same result. It would seem that I would have had more issues if the card wasn't installed correctly including the?autoupdate feature not?working and not finding the card and other autoupdate software packages not installing correctly.
    Any ideas? Thanks.

    [color="#000000"]The Creative Console Launcher 2.60.35 update does not work for my X-Fi XtremeMusic soundcard with Vista 64-Bit OS.
    Edit:
    Either going through the creative autoupdate or downloading the file manually and trying to install this update, I get this message below. Yes, I have went to the right download webpage for my soundcard and operating system.
    My Soundcard : X-Fi XtremeMusic SB0460
    My Operating System : Vista 64-Bit
    [color="#ff0000"]"Setup is unable to detect a supported product on your system. Please
    ensure that your product is properly installed before running this
    setup program".
    [color="#ff0000"]?
    [color="#000000"]?=======
    [color="#ff0000"]?
    <div class="DownloadFileName">File Name : CSL_PCAPP_LB_2_60_35.exe<div class="DownloadText">This download contains?the Creative Console Launcher application. For more information, read the rest of this web release note. This download supports the following audio devices only:
    Sound Blaster? X-Fi? XtremeMusic<
    Sound Blaster X-Fi XtremeGamer<
    Sound Blaster X-Fi Platinum<
    Sound Blaster X-Fi Fatalty?<
    Sound Blaster X-Fi Elite Pro<
    Sound Blaster X-Fi<
    Sound Blaster X-Fi Surround 5. <
    USB Sound Blaster X-Fi Xtreme Audio?Karaoke<
    Fixes:
    Rectifies the output delay when using line-in/microphone monitoring.<<font face="Tms Rmn">?<font face="Helv" size="2">?
    Requirements:
    Microsoft? Windows Vista? 32-bit or 64-bit, Windows? XP Professional x64 Edition or Windows XP Service Pack 2 (SP2)<
    Creative Sound Blaster?audio devices listed above<
    [color="#ff0000"]?
    Message Edited by freesky on 0-02-2009 0:28 PM

  • My hp cm1415 fnw color mf printer responds to laptop via air print but iphone4 can not find printer.

    How do you connect iphone4 to hp cm1415fnw color mfp using air print. Printer works via airprint from laptop using windows. iPhone can not find printer..

    check if your phone and printer are updated to the latest version.

  • AirPrint - iPhone 5 can not find printer after router change

    AirPrint - iPhone 5 can not find printer after router change; however router is exact replacement of previous one (Zyxel, issued by Imagine wireless). AirPrint was working previously. Printer is on same network. Wireless printing working fine. Have tried rebooting prtiner, phone and router. Any suggestions?

    I'd look to HP for support.
    Here's an HP Airprint-related trouble-shooting page:  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03314085&tmp_task=solveCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=5271613
    Lots more info on the HP support site.

  • Have a jpg picture that I want to print on a cd. Can not find a format for full picture

    Can not find a cd  layout that I can put a full picture that I have on it.  It is in jpg format.  I have a ip2700 printer.

    OK, great!  EasyPhoto-Print EX should have come with your printer. If not you can d/l it from here.
    Here is a screen shot but I sugest you read the manual which you can also d/l from the Canon site.
    Simply click these two places to delete the pre-made layouts.
    Now click here and select the one you want or made previously.  
    Hope this helps you.
    EB
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Help...I can not find my IMP post.

    Hi all,
    I posted about IMP 2 weeks ago but I can not find it :(
    It was about import (imp) the old style. I ask how to import my tables from prod which has lots of tablespaces to a target test database with tablespace to use is USERS only.
    I remember someone suggest something like to make a "0" quota for all other tablespace.
    I can not find it anymore.
    I already searched by dates. Any helpful tips on how to search lost post?
    Thanks a lot

    Its not there :(
    Do you know the answer again?
    I have to set quota 0 to all other tablesapaces?
    For example: in my PROD export dumpfile ( tablesapace used are: ts1,ts2,ts3,ts4)
    and in my target test database, I want it to be shoot all in USERS tablespace.
    So i will alter user quota 0 on SYTEM, SYSAUX, UNDO, TEMP tablespaces ?
    Thanks
    Edited by: KinsaKaUy? on 25-Jun-2012 04:56

  • I can see my printer in the utility but can NOT print????

    I have set up the printer utility with the drivers of my new HP all-in-one 1610. I have plugged the printer into the back of my Base Station. Is there anything that I am missing? I can see it through bonjour, but when I try to print, it gets stuck on the "establishing connection with printer"
    Any thoughts???
    Thanks
    Power Book, G5, macbook   Mac OS X (10.4.6)  

    Yeah, thanks for that. not helpful.
    I have tried to log into the AirPort Admin Utility but it gives me an error for the base station. I tried to update the firmware and I got the same error message. The base station is working well enough to get me online, but I can not access any of the base station preferences, or access panels to check to see if it is seeing the printer. I can see the printer in the Printer utility though.
    Thanks for any help.

  • HP Envy 5535 Can not find printer on network OSX Lion/Yosemite

    Here's the background:
    1) I'm using Verizon FIOS and the connection settings haven't changed in 1+ year. WPA2/SSID
    2) I have previously connected and used wireless printing flawlessly.
    3) I can connect to the internet using the wireless setup on the printer/download updates/accept ePrint jobs.
    4) I'm using OSX Lion and OSX Yosemite.
    Recently, I lost the ability to print wirelessly. Nothing changed with my printer, connection, and machines. Both of my computers cannot connect to the printer. I don't even see the printer when I attempt to add it.
    When I attempt to setup the wireless connection on the printer via USB, I see:
    "Device Not Reachable
    The wireless network settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the network."
    I've verified that I have all the latest updates. I could understand why this might happen on my Yosemite box, but the same phenomena is occurring on my Lion box... Any help is greatly appreciated!
    Thanks!

    Hi @tempacc 
    I can't help but wonder if the issue might have something to do with the router. Although nothing has changed, it is possible the router had its own update and it may have made changes to the routers settings.
    Let's first try restarting all the devices using the following steps;
    First leave the router on and unplug the power cable
    Do the same with the printer, leave it on, and unplug the power cable
    Now go ahead and shut down both Macs
    After a full minute, you can plug the router back in and wait until it is fully restarted
    Then, plug the printer back in and wait for the wireless light to become solid
    Now you can restart one Mac at a time
    Now please try adding the printer to one of the Macs. If this does not resolve the issue, please print a network test page from the printer and note the IP address. I'd like you to enter the IP address into the address bar of Safari and let me know if you can access the printers Embedded Web Server.
    Keep me posted.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Officejet Pro 8500 A909a - setup can't find printer, HP Network Diagnostic does

    Windows XP SP3
    HP Officejet Pro 8500 A909a CB022A
    DLM1FN1006BR
    I have been fighting with this printer for the past week, put at least 40 hours into trying to fix this alone. I will never buy another HP product for my office again.
    Windows can find the printer on the network. HP Network Diagnostic can find the printer on the network. But the latest version of the installation for the printer, that I downloaded from the website last week, refuses to find the printer on the network. I would do this without the HP software if I could but I need the functionality of hitting the scan button on the printer and it converting those scanned documents to PDF. 
    Here's a list of things I've tried:
    Finding the printer by IP in the setup (doesn't find it)
    Using the HP Scrub tool for this printer at all levels (L1-L4) MULTIPLE times followed by deleting the files in %temp% and then reinstalled the full software package. 
    Disabled all services and startup items.
    Disabled the Windows firewall. Tried with Windows firewall installed as well.
    Restarted the HP services in services.msc
    Updated MSIEXEC.
    Un registered Re-registered the msiexec
    Re-registered ATL.dll
    Ran subinacl to make sure all permissions are set properly.
    What I don't understand is why the HP Network Diagnostic can find it and the install can't. It seems to me that without installing all the HP software, I have no way of using the scan button to scan documents - the scanner just says "Select Computer" followed by "No Scan Options". 
    Can anyone tell me what I've missed in troubleshooting?

    Bump? Anyone have any sort of advice? Or is everyone seeing that I've followed every step in the HP Support site and nobody knows what else to suggest?

  • Can not find print queue

    I sent a label print job from my Mac Mini to a Dymo 300 label printer. Job was wrong and I could not cancel or find print queue. Mac help said, printer icon will appear on dock while printing (does not) to click and stop or delete from there. Tried going into applications/utilities/printer setup/ and thats not there either. Do I have to reload Mac software? I reloaded latest version of Dymo program and drivers to no avail.

    With the printer setup Utility- double clicking on the printer that you are concerned with will bring up a new dialogue box for that printer, showing various controls as well as the print queue for it.

Maybe you are looking for