HP Envy 15 3040nr Low Framerates while Gaming

Hi,
I have an HP Envy 15 3040nr notebook with an AMD Radeon 7690M dedicated GPU with 1GB of GDDR5 memory. Although I acknowledge that the use of this GPU on my notebook was not intended primarily for gaming, I've read reviews online stating that this is a good GPU for playing most graphical games at a Medium or Medium-Low setting.
However, while playing games like Need for Speed Most Wanted 2012, Assassin's Creed 3, Crysis 3, and BeamNG.Drive, I get horrible framerates ranging from 15-25 FPS. I think the expected FPS lies somewhere in the 30-35 range for such games, and these aren't even the most recent of 3D games.
Also, I don't believe the problem is CPU related because this model is equipped with an Intel i7-2670QM Quad Core, which overclocks to around 3.0 GHz when I'm running games through Turbo Boost. I have yet to run graphical benchmarks, which I will do.
Any advice on what to do would be greatly appreciated.

Thanks for the prompt reply WeiH.
Sadly there doesn't seem to be an HP Service Center in my country (Sri Lanka). So now I'm really confused as to what my retailer's technicians meant by "we'll send it to the local HP Support Center and have your display panel replaced".
Whatever they did, the display panel has been replaced and I've been using it for less than a week so far with no issues. The touchpad hasn't really been heating up and has in fact been as warm as the rest of the notebook. Perhaps it's because I have now turned on the option of disabling the touchpad whenever an external cursor device is attached (since I primarily always use a mouse).
Needless to say, since we both have no clue as to how the touchpad overheated and damaged the screen (in the exact position and measurement as the touchpad) I feel like it's just a matter of time before it happens again.
Obviously I understand that there's little you can do on your side other than direct me to an HP Support Center. However I hope my worries are justified as I feel that as a consumer I shouldn't have to worry about my brand new product malfunctioning by no fault of my own. 

Similar Messages

  • [Solved]Low FPS while gaming Steam games on Linux

    I have low fps (range between 10-30) while gaming Steam games on Linux in e.g. Dota 2 on ultra low graphics  game settings.
    System info:
    Linux 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64 GNU/Linux
    Hardware:
    Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz
    VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller
    NVIDIA Corporation GT 620M
    4 GB RAM
    I have installed next packages:
    extra/mesa 10.4.1-1
    extra/mesa-libgl 10.4.1-1
    multilib/lib32-mesa 10.4.1-1
    multilib/lib32-mesa-libgl 10.4.1-1
    extra/xf86-video-intel 2.99.917-1 (xorg-drivers xorg)
    extra/libcl 1.1-4
    extra/nvidia 343.36-2
    extra/nvidia-utils 343.36-1
    extra/opencl-nvidia 343.36-1
    multilib/lib32-libcl 1.1-1
    multilib/lib32-nvidia-utils 343.36-1
    multilib/lib32-opencl-nvidia 343.36-1
    community/bbswitch 0.8-20
    community/bumblebee 3.2.1-8
    community/primus 20131226-1
    multilib/lib32-primus 20131226-1
    My bumblebee.conf: config
    Logs while starting Steam: steam_logs
    Dota 2 starts with launch option:
    primusrun %command%
    Logs while starting Dota2 form Steam: steam_logs_doat2
    Can anybody help me?
    Last edited by artem.jackson (2015-01-20 09:26:57)

    Alad, I have noticed only one similar error:
    ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded: ignored
    You probably want to start a 32-bit application with bumblebee on a 64-bit system. See the "Note" box in Installation.
    but I have all needed lib32.
    Or am I wrong?
    Last edited by artem.jackson (2015-01-12 17:50:54)

  • Low framerates on a good Laptop!

    Hi,
    Recently I bought myself a new laptop named the: HP 15-P032ND
    Specs of the Laptop:
    Processor: AMD Quad Core A8-6410 2,0 GHz (Up to 3,5)
    RAM: 12 GB / HDD: 1 TB + 8 GB ExpressCache
    Graphics Card: AMD Radeon R7 M260(2GB)
    OS: Windows 8.1
    Mainly for school purposes and sometimes a little bit of gaming.
    So I booted up Minecraft and noticed I had really low framerates! (Around 20-50 FPS)
    The first thing that came to my mind is; 'Why do I have such low framerates on a newly bought
    laptop with decent specs?' So I tried out a few things such as; 
    - Setting Minecraft to the lowest settings possible! (Still only around 40-50 FPS)
    - Allocating more memory to minecraft
    - Turning off VSync in the AMD Catalyst Control Center
    - Setting Minecraft to as an high priority in the AMD Switchable graphics menu
    - Setting Javaw to as an high priority in the AMD Switchable graphics menu
    - Adding Minecraft to the Games/3DSettings menu
    - Adding Javaw to the Games/3DSettings menu
    - Trying to change the graphics mode in BIOS to; FIXED instead of DYNAMIC
    (This one isn't possible since I don't have the ability to change my graphics mode!)
    But none of those options worked, I'm still getting the same FPS rates as I did before!
    If anyone can help me resolve this issue, then that would be amazing!
    This question was solved.
    View Solution.

    Hi Jaco,
    I've already seen that article and I get that it's not a High-tier graphics card but
    my little brother who owns a laptop as well named: the HP Pavillion dv6-1010ed even
    has more FPS then me most of the time. So I guess what i'm saying is that I really don't
    understand how a 5 year-old laptop (Which was in the same price range when it was bought)
    can have comparible FPS with a laptop which has been released in 2014 with a lot better specs!
    Also what i've noticed when I play games like minecraft is that my processor usage sometimes even goes
    up to over 60-70% and when I go into my Catalyst control center it tells me about 2 Gpu's named; 
    - AMD Radeon(TM) R5 Graphics (Primary)
    - AMD Radeon (TM) R7 M260 (Linked adapter)
    My first thought was that it's using the R5 Graphics so I tried to look up how to switch between those two
    but I couldn't find anything that was usable...

  • Qosmio X870 overheats while gaming

    Hello,
    i have qosmio that is running about 95-100 celzius GPU and 85-90 CPU temperatures while gaming from day 1.
    Then i got shut downs due to overheating about 9 months later.
    I go to service, and they clean it and repaste it , it didnt shut down anymore but high temperatures stayed.
    20 days later GPU died, they replaced it, then 10 months later GPU died again, i heard burning inside the laptop.
    They put new one again, but after that when i game for 2 hours, screen shuts down at least once, somethimes twice in that time.
    I took laptop to service for fourth time, few days later they are saying that they didn't still diagnosed the malfunction.
    But my biggest concern is that temperatures are high all that time, i read on A.s.u.s forum that guy with that kind of temperatures got replace immediatly, and the new notebook got 20 degrees lower temp.
    Laptop is about 20 months old, and my question is:
    do i ever have right for replacement or they will just patch it up every few months until warranty expires :( because they are planing to repair it again.
    I need it for video editing also, thats why i bought it, and now for the 4th time my bussines is on hold for a week or two.
    Sorry for long post, im hoping for some answer or mail where i can request replacement, thank you.

    > do i ever have right for replacement or they will just patch it up every few months until warranty expires because they are planning to repair it again.
    As far as I know Toshiba authorized service partner can just repair the notebook and you should ensure that the notebook will be fixed to your fullest satisfaction.
    >I took laptop to service for fourth time, few days later they are saying that they didn't still diagnosed the malfunction. But my biggest concern is that temperatures are high all that time,
    From my experience if the notebook does not shut down automatically, the temperature level isnt too high. Usually in case of overheating, the notebook should power off automatically to protect the internal parts from damage.

  • Low framerate at first run on iOS

    Hi all,
    I find a reason for the following (pretty random) behavior:
    Occasionally an app I'm working on (avg. framerate on iPad 1: high 30's, 40's depending on what's going on) has a whopping 2 fps after it is installed and run for the first time. I've seen it a few times while testing as has the customer. However, I cannot find a reason nor a way to reproduce at will.
    The app uses bitmaps only, some sound and Box2D for bouncing beads against each other (if that helps)
    Has anyone seen this before?
    Thanks in advance,
    Manno

    Hi Sanika,
    I'd like to think not much special:
    I set the stagequality to low
    Instantiate two classes, one of them is nothing more than a screensized bitmap serving as a lid/cover.
    The most complicated class sets up a box2D world, and adds some more classes mostly holding bitmaps that the box2d world will move or that server as layers in between which stuff moves.
    All assets are bitmaps and embedded by the metatag [Embed]
    The box2D world consists of three sensors and approx. 10 boxes. Other items (circles) are added after interaction.
    Then a timer starts for the box2d updates.
    It happens pretty rare but the low framerate is persistent when it does, not like it comes around after a few secs of initialization. My client thought it could have to do with background activity but IMO that's hard to judge since you never really can tell what goes on behind your own app...
    I'll try my best to get some more detail.
    Kind regards,
    Manno

  • GT70 20C Low FPS while playing without charging

    Low FPS while playing without charging. I turn off economy mode and still have problems with FPS.
    Any suggestions?:(

    This is cause by Nividia Geforce Experience which limits the fps to 30 when gaming with battery due to energy saving technique. If you want more performance for the cost of shorter battery life. Open NVidia GeForce Experience. Click Preference and go to Battery. Uncheck set frame rate target when on battery.

  • Usb driver for HP ENVY 15-3040nr Notebook PC for win 7

    Hi,
    Where can i download thge drivers for the usb for HP ENVY 15-3040nr Notebook PC for win 7.
    All 3 ports are acting up, 2 are just not recognising devices.
    Is there a way to replace the hardware if needed?
    Thanks in advance,

    You can find all the drivers here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218​...
    also
    Try installing HP Support Assistant which will automatically download and install drivers/updates:
    HPSA Link: 
    http://www8.hp.com/us/en/campaigns/hpsupportassist​ant/hpsupport.html
    If this dosnt help then refer:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c01893385
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Audio stutters while gaming, browsing, etc

    My audio stutters while gaming, streaming video, etc.
    HP Pavilion dv7-4078ca Entertainment Notebook PC
    Windows 7 Home Premium
    I have read various fixes and answers but i am unsure as to which applies to my computer.
    Which is the correct path of action for me to take to solve this problem?

    Hi
    Please find the link given below might help you to resolve your issue.
    1) Update the Bios latest one and Audio driver given in the Weblink given below.
    Software & Driver Downloads - HP Pavilion dv7-4078ca Entertainment Notebook PC
    2) Try doing a system restore to the date where the unit was working fine.
    3) Try using different Browser like Firefox or Google Chorme and have it checked.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Lag spikes while gaming, probably due to wireless network

    While gaming online, I get lag spikes, or as I like to call them, due to the nature of what happens, warping, every so often. By warping I mean I do something, my screen shows it, but the action never got sent across the server. So if I were to move right during a warping event, it'd show me that I moved right but then in a second I'm back where I was. (I hope that makes sense)
    As for what I've done to try to rectify this problem:
    Reset the router
    Open up all necessary ports (actually I just enabled DMZ, which would open all ports)
    I would have updated the drivers for my wireless adapter, but this problem also occurs when I'm gaming online on a console connected to the wireless network so I highly doubt the drivers would be the problem.
    As for my router's model number, it's WRT54G.
    Now, for the question I have. Would switching to a WIRED network fix this problem? (despite that pinging from a wireless connection then pinging from a wired connection was consistent)  If so, why? (the why would be to convince my dad, as he believes that due to the consistency in the pinging attempts (only 3-4 packets lost out of 100 when pinging to Google) the problem couldn't be due to the wireless network)
    Many thanks for your time.

    You should try to upgrade your router's firmware, reset and then re-configure your router...
    Download the router's firmware from here 
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    Adjust the Wireless Settings after re-configuring the router - 
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
    Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    -Wireless Network mode should be mixed...
    -Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
    Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...See if you face the same problem...

  • R7870 TF III 2GB OC edition Black Screen while gaming (Guild Wars 2)

    Hello there mate,
    1st time post for me,
    i'm from Indonesia, and i just got my r7870 recently
    and i'm using it now for playing Guild Wars 2.
    1st i'm using the "auto detect" mode in Guild Wars 2
    where give me "high" setting for the graphic
    but after a few minutes i got a black screen.....
    that force me to shut down my system by press and hold the power button,
    then i try with "low" setting for the graphic (in Guild Wars2)
    but still got the black screen after another few minute..
    and i'm using CCC ver. 12.8
    i have been search and found some post with similar issue with this (black screen while gaming with r7870)
    what can i do to solve this prob ?
    Note : before using r7870, i used r4870 1GB, and have no problem playing Guild Wars 2 (in low setting)
    here is my rig :
    Main Board : MSI - Z68MA - G45
    CPU : I3 - 2120
    RAM : 2x4GB GSkill
    PSU : 650 Watt Seasonic
    HHD : 2x 500gb Seagate
    Graph Card : MSI - r7870 TF3 OC edition
    sorry for my bad English, hope you all still can understand.

    Quote from: Svet on 08-September-12, 07:20:56
    have you tried msi vga drivers for your card?
    do you have such issues elsewhere?
    well i haven't tried using the drive that come within the bundle yet
    but as i mentioned before, i did not have any problem playing GW2 and other games
    with my previous card (4870) and using exactly the same rig,
    so i don't think the problem lies elsewhere,
    but i think ill try msi vga driver that i got in the cd 1st,
    thanks for your suggestion, ill report again the result later.
    tried the msi vga drive (ver. 8.95) that come within the budle
    and well... still got the black screen problem.. (tested with guild wars 2)

  • Why does my battery to a 3gs iphone heat up so much without any casing while gaming ?

    Why does my iphone 3gs overheat while gaming without any casing within 15 minutes of playing ?

    Devices heat up when being used heavily such as when gaming.

  • How to adjust video while gaming

    I have an MSI FX5900SP  256mb and I want to know if there is a utility that I can download that I can hit hot keys to adjust the gamma, contrast and brightness while gaming.   My buddy has an ATI 5950 from Asus and asus has a utility to adjust while gaming and its awesome.  I think like ctrl+G for gamma and it does it while playing.  I have been looking and can't find any utilities that will allow me to to adjust the features while playing on this MSI card.

    Skunk_Spray,
    I do not know of an nVidia utiltity that would allow you to do that, but you can still adjust gama and resolution in game with the game's options.
    Take Care,
    Richard

  • My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails. What is wrong with it?

    My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails, even works fine with headsets. What is wrong with it?

    well i'd seriosly say point a hot hair drier at the speakers as water has entered the phone most commonly via the home button but avoid getting it too hot let it cool every 3 minutes after constant drying. Don't worry I have honestly dont this with my iPhone 4 GSM 16GB. For future reference avoid letting it get wet.

  • Keyboard ghosting on my laptop while gaming.

    So, I'm having a weird issue with my laptop. We all know that laptops have volume adjust buttons right? In my case, I have fn+F8 and fn+F9. Now here's the issue, whenever I adjust my volume while gaming by pressing those 2 keys, a third keypress is also registered, in my case it's "c" key. This is extremely annoying becuase in games, all keys have their own command and when that keypress is registered without me wanting it is really annoying. (effected games as far as I tested are, CS:GO and Left 4 Dead 2). This does not happen outside games as far as I tested, and it does not matter if I have HP hotkey support software installed or not. So, is anyone having a similar problem? Any solutions? (other than not asigning that key any commands in games)

    '''Whenever you get a message / popup that'''
    '''software / files need to be updated;'''
    <u>'''DO NOT USE ANY OF'''</u>
    <u>'''THE PROVIDED LINKS'''</u>
    While this may be a legitimate message, it could also be
    <u>'''Malware or a Virus'''</u>.
    Any time you want or need to check for upgrades,
    go to the web site of the <u>'''True Owner'''</u> of the program in question.
    For example, to check out Firefox, go to '''[https://www.mozilla.org Mozilla.org]'''. {web link}
    You can sent a report to '''The FBI''' via their web site
    '''[http://www.ic3.gov/complaint/default.aspx Internet Crime Complaint Center (IC3)]''' {web link}
    You can also report such a site at;
    '''[http://www.google.com/safebrowsing/report_phish/ Google Report Phishing Page]''' {web link}
    which is the same when done while on site by going to
    '''Help > Report Web Forgery'''
    '''[http://www.mozilla.org/en-US/legal/fraud-report/ Help us safeguard Mozilla’s trademarks by reporting misuse]''' {web link}

  • Satellite X200-219 overheats while gaming and shuts down

    Ok I originally lived in the UK, where I bought a Toshiba X200-219.
    Since then I moved to the States, and have the laptop plugged into a surge protected extension cord, attached to plug converter.
    Once the warranty expired on the laptop, I upgraded to 4GB of RAM, and switched out both hard disks to Seagate 320GB 7200rpm drives.
    Now ever since I moved to the States, the laptop has been overheating, more and more frequently even *before* I upgraded the components; this has usually been happening whilst gaming. I have been regularly blowing out any dust that might have settled inside the vents with compressed air
    But this time it's different. I was playing Red Alert 3, and it did it 3 times. When the laptop over heats, I have to remove the power cord and then reinsert it before switching it on. Except the final time I tried that, the laptop didn't start. There are absolutely no signs of life from the thing, even after cooling down for the past 2 hours. There aren't even any lights acknowledging that the power cord is plugged in. Oh and I've replaced the fuse so it can't be that (the battery is in the back in this instance)
    In the UK the laptop ran at a normal temperature. Over here it was running hot to touch, and the fan was screaming but it was manageable.
    It ran even hotter on the odd game I was playing but not whilst en/decoding movies.
    Please don't let this become one of *those* threads where everything fizzles out and I don't get an answer. Any ideas please?
    Happy holidays folks
    Aseel

    Hi
    Overheating is a serious issue because a high temperature can damage the internal parts.
    The internal temperature increases to a higher level because all devices like CPU and GPU are running with high performance while gaming.
    In such case the cooling module fans should rotate faster to ensure that the warm air would be blow away
    In many cases the cooling modules cannot work properly because the dust and debris clog up the cooling grilles or there is not enough thermal grease between the cooling module and CPU or GPU.
    Furthermore its not recommended using NON-Toshiba graphic drivers because such non Toshiba graphic drivers are not designed for the notebook usage and can lead to such overheating issues.
    You should also ensure that there is enough free space around the notebook. This is important for properly fresh air circulation.
    But of course an faulty cooling module could be also responsible for such overheating issues and in such case ONLY the ASP would be able to help you.
    Greets

Maybe you are looking for

  • Error message when downloading 7.0.2

    When I tried to upgrade itunes to 7.0.2, I got an error message. I got to the stopping services part of the download and then it said "service 'ipod service' (ipodService) could not be stopped. Verify that you have sufficient privleges to stop system

  • Help with loop in code

    I have the following servlet which connects to a database and should brgin back the name of all films that an actor has stared in below is part of the servlet my problem is each time i run the servlet it just prints out "sorry there has been an error

  • Setting up LDAP for authentication to portal:default property set named "ldap

    Hi I am trying to implement the LDAP authentication to WebLogic Portal .Iam went thru the docmentation ( http://edocs.bea.com/wlp/docs40/p13ndev/users.htm#1131824).It mentions using the default property set named "ldap" and deploying ldapprofile.jar.

  • Wifi printer help

    i have an hp envy 5530 wifi printer....  it shows that it is connected to wifi...  when i try to print my computer says that the printer is "offline" I have tried many things..  such as.. resetting the printer wifi status, and powering off and on pow

  • I cannot uninstall "Nokia Multimedia Factory" He...

    During the unistallation of a program (Nokia Multimedia Factory), the following messages appear me: "Error 1316. Error of net during the attempt of reading from the file:C\Windows\Installer\Nokia MMultimedia Factory.msi " and "Error: -1603 irreversib