HP Envy 15-j126TX Unable to turn on, hard reset does not work, warranty just over

Dear all My HP Envy laptop was working fine every day, doing its job well till today.I tried to turn on the laptop by pressing the power button, but nothing happened.Removing the battery, using only the AC charger, switching power sources and hard resets all don't work. What the problem looks like:- laptop does not turn on when power button is pressed- charging port emits a red light when battery is in, white light when only relying on AC power.- screen does not turn on at all, no fan sounds either. To make things worse, HP has been asking me to extend my warranty for about a month. I declined. The warranty end date (1 year) was approximately July 14. Today is July 15. I hope this is not the case, but it seems that HP has produced a computer designed to fail on the exact date that warranty ends. I would greatly appreciate any help as I depend heavily on my laptop for school and work purposes.Thank you!

Hi ,
Welcome to the HP Forums! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. Thank you for posting. I have read your post, and I understand that your laptop will not start up. I want to assist in that. Please follow the document below for troubleshooting.HP Notebook PCs - Computer Does Not Start (Windows 8) Let me know the results of your troubleshoot. Regards,

Similar Messages

IPhone 4 will not turn on, hard reset does not work.

walked home today, slight rain, headphones in. did it a thousand times no problems. half an hour after getting home i check my phone and it doesnt turn on. liquid contact indicators are untouched, hard reset will not turn the phone on. in addition plugging my phone in has no effect.
is there a fix for this? does anyone know what i can do.

i just experienced an odd problem. Last night, i turned OFF my iphone before going to sleep (as i do every night, and i would turn it back on when i wake up). This morning, i tried turning on my iphone and nothing happened! i tried charging it (using several different chargers btw) and it wouldnt turn on at all.
But after looking at this forum, i did a hard reset and it was finally able to turn on again.
Does anyone know what this problem might be? Even though i got it working already, i'd like to know what might be the cause of it so i can avoid this issue in the future.

My ipad wont turn on, and reset does not work

My put my ipad to sleep and had just fully charged it - About an hour later went to wake it up and wont turn on. It also wont charge, nor is itunes recognising it. I have tried the reset function by holding down the home and sleep buttons (and have tried for up to a minute) with no response?
Does anyone have any other fix it solutions?
Thanks in advance - hopefully....

Read this.

My iphone 4s keeps shutting down on it's own and seems to restart itself. Pressing the home button or trying a hard reset does not turn the phone back on. Is anyone else having problems like this?

My iPhone 4s keeps randomly shutting down. It usually does this after it's been sitting in sleep mode for a few minutes. Pressing the home button or attempting a hard reset does not turn the phone back on. It seems to turn on on it's own. It has done this since I got it and seems to be doing it more frequently. I've only had the phone for about 2 months.

Welcome to the Apple Community.
This isn't a Home Sharing problem, you will get better answers posting in the iPhone community.
https://discussions.apple.com/community/iphone/iphone_hardware
https://discussions.apple.com/community/iphone/using_iphone

HT4623 the wifi turn-on/off feature does not work on my iphone... it's stuck on off and won't turn on. Does anybody know how to fix it?

the wifi turn-on/off feature does not work on my iphone... it's stuck on off and won't turn on. Does anybody know how to fix it?

Hello khalidbadir,
I would be concerned too if my touchscreen was not responding on my iPhone. I recommend following the steps in this article to address an unresponsive touchscreen:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Thank you for using Apple Support Communities.
Best,
Sheila M.

Turning on Web Sharing does not work and fails to load apache web server

Sort of answering my own question here but hope it will be useful to other people and save them some time.
After receiving my shiny new imac with os x lion pre-installed, I was a little dismayed and confused when I went to System Preferences -> Internet and Wireless -> Sharing and attempted to check the Web Sharing. Every time I clicked this option I was told Web Sharing was starting but would then repeatedly fail and apache failed to start.
Looking in the Console I find:
org.apache.httpd: dyld: Library not loaded: /usr/lib/libpq.5.dylib
org.apache.httpd: Referenced from: /usr/sbin/httpd
org.apache.httpd: Reason: image not found
Entering in the console:
vim /Library/Logs/DiagnosticReports/httpd_2011-08-06-165030_localhost.crash (date and time bit will vary)
reveals:
Process:         httpd [2418]
Path:            /usr/sbin/httpd
Identifier:      httpd
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process: launchd [1]
Date/Time:       2011-08-06 16:50:30.106 +0100
OS Version:      Mac OS X 10.7 (11A511a)
Report Version: 9
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /usr/sbin/httpd
Reason: image not found
Binary Images:
       0x1022f6000 -        0x102352fef httpd (??? - ???) <9D63FBFD-DD87-3DD5-AD1A-D8A79FEC3EE8> /usr/sbin/httpd
"/Library/Logs/DiagnosticReports/httpd_2011-08-06-165030_localhost.crash" 32L, 1469C
TO FIX THIS ISSUE:
It appears /usr/lib/libpq.5.dylib does not exist but /usr/lib/libpq.5.3.dylib does.
Fix by creating a symbolic link from /usr/lib/libpq.5.3.dylib to /usr/lib/libpq.5.dylib
=
sudo ln -s /usr/lib/libpq.5.3.dylib /usr/lib/libpq.5.dylib
Going back to System Preferences -> Internet and Wireless -> Sharing clicking Web Sharing a couple of times turns Web Sharing on successfully!
Going to http://localhost/ displays the "It Works!" page.
HTH people as it took me a while to find the correct solution online from:
http://www.azattis.com/2011/07/os-x-lion-postgresql-84-install-problem.html

Hi there,
You seemed to have had a similar problem to what I now have and so wondered if you might be able to help me :-)
I have posted this as a new post as well but if anyone has five mins could they take a look - I would be very grateful. Here you go:
I am new to all this so I have probably made some simple errors and I hope someone can help me. I will retell what I have done as I haven't a clue what part of what I have done has mucked things up.
I am really stuck. Web sharing will not start on my iMac running Lion OS X. It did work fine and then I wanted to activate PHP so my test website contact form would work (and send the data on the form throught to my email address.
Before I did anything I turned on websharing and could view my website from another computer using: http://192.168.1.4/~stewartfergusson/
I think followed the instructions on this link to activate PHP -http://foundationphp.com/tutorials/php_leopard.php
I then did a few things in terminal and will paste below what I did:
Last login: Sun Jan 1 09:01:52 on console
Stewart-Fergussons-iMac:~ stewartfergusson$ cd/private/etc
-bash: cd/private/etc: No such file or directory
Stewart-Fergussons-iMac:~ stewartfergusson$ cd
Stewart-Fergussons-iMac:~ stewartfergusson$ cd prvate
-bash: cd: prvate: No such file or directory
Stewart-Fergussons-iMac:~ stewartfergusson$ cd private
-bash: cd: private: No such file or directory
Stewart-Fergussons-iMac:~ stewartfergusson$ cd /private/etc
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo cp php.ini.default php.ini
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
Stewart-Fergussons-iMac:etc stewartfergusson$
Last login: Wed Jan 4 09:03:03 on console
Stewart-Fergussons-iMac:etc stewartfergusson$
Last login: Thu Jan 5 06:19:15 on console
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo In -s /usr/lib/libpq.5.3.dylib /usr/lib/libpq.5.dylib
Password:
sudo: In: command not found
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo ln -s /usr/lib/libpq.5.3.dylib /usr/lib/libpq.5.dylib
ln: /usr/lib/libpq.5.dylib: File exists
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo apachectl -t
Password:
Syntax error on line 1 of /private/etc/apache2/httpd.conf:
Invalid command '1', perhaps misspelled or defined by a module not included in the server configuration
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo apachectl configtest
Password:
Syntax error on line 1 of /private/etc/apache2/httpd.conf:
Invalid command '1', perhaps misspelled or defined by a module not included in the server configuration
Stewart-Fergussons-iMac:etc stewartfergusson$
An important point to note is that I now appear to have more than one http.config file and they are located in the following locations:
1) Macintosh HD/etc/apache2/httpd.conf.default
2) Macintosh HD/etc/apache2/httpd.conf.default.default
3) Macintosh HD/etc/apache2/original/httpd.conf
I edited this file (which one I have not got a clue) and also the php.ini file within Macintosh HD/etc/ using Terminal - the command I used was sudo cp php.ini.default php.ini
This php.ini file now exists in two locations now as well:
1) Macintosh HD/etc/php.ini
2) Macintosh HD/etc/php.ini.default
I then edited this file by changing the line of code below from:
514 error_reporting = E_ALL & ~E_NOTICE (I think it said E_DEPRECATED actually) but I am lifting this from the web page in the link above)
To:
514 error_reporting = E_ALL
I then saved this file.
I then deactivated web sharing in System Preferences and since then have not been able to restart Web Sharing. I click it and it flashes orange for a second then does not start.
This was all done to activate PHP on my iMac so I can host my own site which has a PHP contact form page.
Please help I am so out of my depth I am very worried I may have changed things and I am going to forget what I did.
If you need to know anything then please ask.
Thank you so much
sfergusson1
'JollyoldEngland'

Unable to uninstall applications - CC Cleaner does NOT work

Create cloud app lets me sign on, but I only get the blue spinning wheel.
I have tried all four solutions at App doesn’t open | Progress wheel spins continually without success.
I tried uninstalling all of the CS5 apps without success....I am getting a error message for each.
I have also tried the CC Cleaner tool....message states that it has run successfully, but the log indicates that it was unable to remove folders...
Any suggestions for a next step?

Hi Dklopp,
Not sure if it was just a typo but there are actually five solutions rather than four in that doc.
Is it all tabs or only the Apps tab that isn't populating?
Also, if you are on Mac this thread might have some additional things to try in relation to browser add-ons such as Safari Adblock or Cooliris
https://forums.adobe.com/message/7082761#7082761
- Dave

Problem with my iPod touch: Frozen screen, unable to access anything as slider does not work, will not accept a full restore. Apple Store advised that it is a 'hardware' problem and I could trade-in!

I am a relatively 'new' user. Touch was a gift, I used it in a simplistic way - listened to music took a few photos, added a few calendar events. After a year I then decided to be more proactive and found a few free apps (Solitaire) - then had a the frozen screen problem which I though was connected to low battery, but it wasn't. I recharged it, still could not access, then tried a full restore and got an error message. Took it to a Genius Bar and was told it was a hardware problem and as it is out of warranty I could trade in or just buy a different product. As this is my first Apple product is this usual? Do Apple products have a very short shelf life - I anticipated that it would last me longer than a year! Has anyone else had this problem? Was it able to be resolved? Or is it worth trying to get it repaired - and if so who can do it - Apple Store did not offer that to me as an option?

Sure sounds like a hardware problem. It happens some times. The iPod is just an electrical device.
Apple will exchange it for a refurbished one for this price. Apple does not repair your iPod.
Apple - Support - iPod - Repair pricing
A third-party place like the following maybe less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My new ipod nano does not work when you turn off the computer

I bought a new iPod but I have a problem when you turn off the computer does not work. Shows that the battery is full and it was lightning. Ipod only works while connected to your computer. What should I do

Hello pepi95,
And welcome to Apple Discussions!
If you just bought the nano, why not bring it back for a replacement or your money back? It's definitely a defective iPod. Not much else for options here. Sorry.
B-rock

The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV

HT1430 When charging my Ipad mini, it turned off and its still not working, what do i do pls??

When charging my Ipad mini, it turned off and its still not working, what do i do pls??

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Upgraded to iOS7 but cant accept the terms and conditions as it is 'unable to connect to server' on both my iPhone and iPad, whilst my collegues all could accept them...RESET did NOT work. Any alternative thoughts?

upgraded to iOS7 but cant accept the terms and conditions as it is 'unable to connect to server' on both my iPhone and iPad, whilst my collegues all could accept them...RESET did NOT work. Any alternative thoughts?

I got it to work by enabling cookies in safari settings and turning off private browsing. Cookies are probably the key thing here. Accept button will appear at bottom right of first screen of agreement.

IPhone 5s not working after voice over turned on

iPhone 5s not working after voice over turned on

Hello ss1997,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone will not boot past the Apple logo please follow the steps in the article below.
iOS: Not responding or does not turn on
Take care,
Alex H.

Admission charge my iPod is turned a corner, and Does not want to load composure?

Admission charge my iPod is turned a corner, and Does not want to load composure?

Could English not be your native language since you question does not make sense? If so try posting in your native language. Otherwise clarify.

HT3669 HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.

HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.
I would like to print via the USB connection instead of wireless (the wireless does work, and the scanner works via USB).
I tried connecting the printer directly (via USB) to my MacBook Pro laptop and it worked just fine.
How can I make this printer work on my iMac?
I spent 4 hours on the phone with HP and we did every combination of installation of drivers ad nausum and their bottom line is that it is a Mac problem.
Any help would be appreciated. Will be sending this printer back to Amazon if I can't make it work on the USB.
I am open to questions or suggestions
Thanks,
Chet

After 4 hours on the phone with HP and another hour with Apple (Mavericks support) no real solution other than check everything (removed everything from Login Items, removed all HP software anywhere in the system reboot, reinstall printer) then when nothing worked for the 4500, did an OS Reinstall (boot with CMD+R).
The Mavericks support group did open an incident (# 542875311) and I will update it when I figure out how to find it on the system.
My feel is that the base problem is that somewhere between the HP-Inkjet-SW-OSX-Mavericks_v12.34.49-2 package and the Apple HP Printer software in the Library (version 2.16.1) the app for printing via the USP Port just does not get installed for the mid 2007 20 inch iMac. The scanner is recognized on the USB Port and the Printer works fine on Wi-Fi. I have too many devices to burden my home network with anothe device. Also, every time I put any HP Printer on Wi-Fi, my router (Netgear N600 WNDR3400 running 12 to 20 devices depending on who is home) gets wonky (but that's anothe story...).
Additionally, when I attach the HP Envy 4500 to my MacBook Pro (2010) it works perfect - print and scan via the USB prot and both functions show in the System Preferences - Printers and Scanners just as expected and just as the 3050 does.
Chet

HP Envy 15-j126TX Unable to turn on, hard reset does not work, warranty just over

Similar Messages

Maybe you are looking for