HP Envy 15t-J100 Nvidia Graphics card issue.

Hello, I recently bought a HP Envy 15t-j100. I was under the impression that it came with a NVIDIA Geforce GT 740m graphics driver ( even has the sticker on the laptop) and a HP Intel HD 4600 driver. However when I went to device manager and looked at the display drivers, the Nvidia driver was not there. The only driver that was there was the Intel HD one. I then decided to go to the nvidia website and download the latest driver, but that didn't work because it told me it couldn't continue due to imcompatibility. I'm confused, I have the sticker that tells me that I "have" the nvidia geforce graphics card, but in device manager I don't see it. Help!

Hi,
The Envy 15t-jxxx series is a set of CTO machines. What is the model/product of your computer ? Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
You can't see something like the following image ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Non NVidia graphics card issues with Adobe and Mountain Lion

It took me a while to figure it out, but now I am certain. If using a Mac with a non nvidia graphics card there will be issues in Mountain Lion while using Adobe products. I tested this with Illustrator CS6 for over a year on 5 different Mac computers.
Here is what happens
As soon as I open Illustrator on a Mac without a NVidia graphics card and I attend to apply an shadow effect, Illustrator crashes. If I do this procedure on a Mac with a NVidia inside, all works well.
I tested this on the following Macs
MacBook Pro (Early 2009) with NVidia 9600M GT - it works
MacBook Pro (Early 2011) with Radeon 6750M - doesn't work
Mac Pro (Early 2009) with Radeo HD 5770 - doesn't work
The same Mac Pro (Early 2009) with NVidia GT120 - it works
MacBook Air (Mid 2012) with Intel HD 4000 - doesn't work
iMac (Late 2012) with NVidia 680MX - it works
Since I owned all these Macs, I could test it several times with different kind of software updates. 10.8, 10.8.1, 10.8.2 and 10.8.3 did deliver the same result. Everytime the same result.
Already got in touch with Adobe
With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
What can be done, to resolve this issue? I cannot buy only Macs with NVidia inside, since the small portable front of Macs is only coming with Intel graphics cards. And is there anybody out there, having this issue? I cannot be the only one, using shadows in Illustrator.

With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
A typical response. IMO it's most likely a combination of Adobe's reluctance to fix the issue combined with Apple's desire for advancement and change. I've personally experienced several things that've become broken owing to Apple changing fundamental aspects of the OS, and the developers of the third-party software in question have either never fixed their software, or are taking their sweet time. WireTap Studio and Snapz Pro from Ambrosia are a case in point, though they eventually fixed Snapz Pro. Eventually…
Frankly, good luck getting either side to do anything about this. Your best bet is probably getting in touch with AppleCare and seeing if you can get this escalated to Engineering, but I wouldn't hold your breath for a fix from either party. Or perhaps one of the Apple mailing lists will prove useful.

MBP Screen goes black and then restores. NVIDIA graphics card issue?

I've got a mid-2007 MBP, 2.4 GHz, 4 GB RAM, running 10.6.2.
Over the past couple of days I am having random losses of video screen. I will be on a webpage, doing nothing with it, and the screen will go momentarily black. It normally lasts for a few seconds, then restores. Nothing I do seems to affect the blacking out or the restoration.
I have the NVIDIA GeForce 8600M GT graphics card.
Any suggestions / input on whether I am experiencing the failure? FWIW, computer is still under Applecare.
Thanks

See this KB article:
http://support.apple.com/kb/TS2377
I have similar issues with my MBP. However there is also a widespread issue on the forums in which the trackpad and keyboard stops responding, and it may be difficult to tell if the problem is loss of video or loss of input ability when the display goes to sleep automatically. I'm currently in this boat. I'm not quite sure if I have a video problem of if this is the issue with the trackpad/keyboard connection.
The video card issue appears that apple will pay for out of warranty but they are not addressing the widespread problem with trackpad and keyboard loss of function and if you are out of warranty you are out of luck.
Message was edited by: Bryan Brindeiro

Lenovo z5070 graphics card issue 'nvidia'

i bought a new laptop .. i have windows 8.1 ... Z5070 - Graphics cards issue (Unable to play heavy graphic games. Nvidia Card) Z5070 with Nvidia Graphic card is having problem when playing high graphic games. The Nvidia graphic card is not detected and it is only using the Intel Graphic card.i install latest updates for everything.what is the problem pllz i want to play games

Hi abdallah650, By default the graphic cards used by computer are switched automatically, depend of application to run. You can check and change this for each application in NVidia Control Panel - 3D settings.
Also you can run each application with right click on it and choose the prefered graphic card. Read this article: switching between Intel and NVidia graphics and here. I hope that will help you.

Video freezes on my Envy 15t-j100 (E1P04AV)

I bought this back in December 2013. Back then, the video would freeze permanently until I closed the the window and reopened the video. An updated video driver came out which helped a bit with the problem. The computer now freezes for a few seconds and then continues. Still annoying and shouldn't happen. Any thoughts?
Computer: HP Envy 15t-j100 (E1P04AV)
Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
System Board: 1962 KBC Version 93.51
System BIOS: F.56
Windows version: 8.1 64-bit
Intel HD Graphics 4600
Driver: 9/9/2013
Version: 10.18.10.3304
Thanks!

Hi,
Well, going back over your last 2 posts. Everything you mention points to a conflict between Firefox and Adobe's Flash. It's no secret that Firefox v. 31.0 has and is having a lot of problems. You can find this all over the web in a google search. As you've narrowed down the issue, the only suggest I have is checking out the Firefox forums(http://forums.mozillazine.org/viewforum.php?f=38) or Adobe's(https://forums.adobe.com/community/flashplayer). Maybe one of the two have a work-a-round or fix.
You did make note that you thought IE was having an issue, this seems to have just "fixed" itself with flash. If you reinstalled or updated flash, that could have been the trick.
If the issue occurs again from multiple sources, please let me know.
I worked on behalf of HP.

WLAN for HP ENVY 15t-j100 Quad Edition Notebook PC

I just purchased a HP ENVY 15t-j100 Quad Edition Notebook PC with Windows 7 (February 2014).
It comes with 802.11bgn 1×1 WLAN module, which is not satisfactory so I would like to upgrade the WLAN to an Intel 7260ac.
According to the user manual, the following two parts are the only WLAN whitelisted by the BIOS:
#1:
Intel Dual Band Wireless-AC 3160 802.11 ac 1×1 WiFi + Bluetooth 4.0 Combo Adapter
Spare part number = 710662-001
#2:
Intel Dual Band Wireless 7260 802.11 bgn 2×2 WiFi + Bluetooth 4.0 Combo Adapter
Spare part number = 717384-001
I cannot find any of these models anywhere! I do find a 710661-001 on Amazon (which would be great if the BIOS accepts it! and good price too at about $35).
Could someone tell me if I can put this WLAN card (710661-001 on Amazon) or where to buy the HP approved #1 and/or #2 card listed above?
Thank you!

Hi Arnaud_, welcome to the HP Forums. Unfortunately if the parts are not in the user manual I cannot guarantee they will work. You can try to buy it from HP PartSurfer.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

NVIDIA Graphic Card doesn't work on T430S with Windows 8

My T430S laptop runs Windows 8 and has a NVIDIA graphic card. Somehow I was never able to enter the NVIDIA control panel and got the error message below. I checked the setting in BIOS and it seems that NIVDIA Optimus mode is not availale on Windows 8. I updated the most recent driver released in Feb 2013 from Lenovo but it didn't solve the problem. I was wondering how I could use the NVIDIA on my compueter.
Link to image
Moderator comment: Image(s) >50KB (or totaling >50KB) converted to link(s). Community Rules.
Solved!
Go to Solution.

Hi, jumper1127
There is also a BIOS update availabe for your machine that came out around the same time as the Optimus driver. That can be found here and may help your issue.
Best of luck. Let me know how it goes
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

After Effects CC 2014 Graphics Card Issues?

I just updated to After Effects CC 2014 the other day and have been having issues with it accepting my graphics card.
I worked with AE CC before this with this card and haven't had any issues. The program will not use the graphics card for any ray traced rendering. The error message that I get at startup of after effects says "Ray Tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later." I have CUDA 6.0.37 installed
2013 15" Retina Macbook Pro
Intel i7
NVIDIA GeForce GT 750M 2GB
512GB SSD
Mac OS 10.10 "Yosemite"
AE CC 2014

This is what After Effects screen shows. Its weird because AE says that my driver version is 1.0, but its actually 6.0.37

Can hp ENVY 15 J 126TX GRAPHIC CARD BE UPGRADED

can hp ENVY 15 J 126TX GRAPHIC CARD BE UPGRADED?it has a nvidia gt740 and i want to maybe upgrade it to something better like GeForce GTX 780M or gtx770.help pls

Definitely not,
Manual:
http://h10032.www1.hp.com/ctg/Manual/c03943414.pdf
Go through page 22, 64, 65
Graphic card is soldered in to the board & also none of the cards you mentioned is supported by the system.
Regards,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

NVIDIA Graphics card is not found on my U510 ideapad

Hello,
I bought this specific laptop because it said it came with a NVIDIA GeForce 625M (1GB) graphics card installed. I have downloaded several drivers, and always get the same error. It says that a NVIDIA device cannot be found on my system. I have the U510 IdeaPad. I have gone into the control panel and checked out the display adapters, and nothing shows up for NVIDIA; just Intel (R) HD 4000. I would like to know how to access my NVIDIA graphics card, because as far as gaming goes, I can do next to nothing with the Intel card.
Thanks!

hi amcalvert,
Welcome to Lenovo Community Forums!
Can you verify that this card was present before,
There are models that does not have the Nvidia on it but Intel HD alone.
You can send me the Serial Number of your computer through private message and let me check your system's Original Configuration.
Thanks
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Boot from mSATA drive on HP ENVY 15t-j100

I purchased an HP ENVY 15t-j100 with a 1TB drive and 16GB RAM. There is an avaialble mSATA slot in the user area so I purchased a CRUCIAL 240Gb mSATA drive with the intention of installing the WIN 8.1 OS and my programs on the solid state drive and use the slor (5400) hard drive for data.
I used the Recovery drive I created to get the OS on the mSATA - no problem.
It even boots up - but when I install the hard direve the system tries to boot from the spining drive - the BIOS shows that the Hard dirve is "in" Port 0 and the mSATA is Port 1 and there does not seem to be any what to change this so, after all the work and research it dies not seem like I can utilize the mSATA slot on this notebook.
Any ideas would be greatly apprecaited.

HLubert wrote:
I purchased an HP ENVY 15t-j100 with a 1TB drive and 16GB RAM. There is an avaialble mSATA slot in the user area so I purchased a CRUCIAL 240Gb mSATA drive with the intention of installing the WIN 8.1 OS and my programs on the solid state drive and use the slor (5400) hard drive for data.
I used the Recovery drive I created to get the OS on the mSATA - no problem.
It even boots up - but when I install the hard direve the system tries to boot from the spining drive - the BIOS shows that the Hard dirve is "in" Port 0 and the mSATA is Port 1 and there does not seem to be any what to change this so, after all the work and research it dies not seem like I can utilize the mSATA slot on this notebook.
Any ideas would be greatly apprecaited.
I have solved it by installing a third party bootloader on the main hard drive. The hard drive must be connected via USB to a computer (even the same laptop with the mSATA in as I did). I have used Bootice to install a bootloader called Plop .
http://www.pendriveapps.com/bootice-partition-flash-drive-edit-boot-sector/
Then put the hard drive back in and set the mSATA in Plop as the boot drive. Here is some info:
http://www.plop.at/en/bootmanager/thebootmanager.html#b4
I couldn't make it work but then I went to "Profiles" - "Linked partitions", picked the right partition, confirmed it and it worked. However, I don't have the laptop anymore and can't say exactly what to do.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Please help ... Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later?

Hi there,
I'm have a bit of an issue with After Effects and Premiere.
After Effects:
Keeps asking for Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0
Premiere crashes unexpectedly
Can someone please help
Much-ly appreciate

Hi there,
Sorry took a while to get back to you guys. I have been having some issues with Premiere and Aftereffects CC.
I recently bought an Apple Pro CTO - Intel Xeon E5 3.7 GHZ Quad-Core with 10MB of L3 Cache, 32GB (4x 8gb) 1866MHZ DDR3 ECC DDR3 RAM, 1TB PCIE-BASED Flash storage, DUAL AMD FIREPRO D500 GPUS with 3GB of GDDR5 VRAM, DUAL Gigabit NIC, 802.11AC, bluetooth, 6x thunderbolt2 ports, MAC OS X.
Issue 1 - Aftereffects CC
Ray-tracing o the GPU requires an approved NVIDIA graphics card and CUDA 5.0
Issue 2 - Premiere CC
Warp Stabiliser wasn't stabilising correctly and now doesn't work at all in premiere CC. I even tried to link to aftereffects but it still doesn't stabilise the shots correctly.
I use to operate PC before with Adobe CS6 and I didn't get any issue stabilising.
If you guys can point me what's the best way to get it to work correctly that would be magic.
Look forward to hear from you
Regards,
Jean-Eddy Moutou

Is it possible to upgrade MacBook Pro 15inch iris pro Retina display version to Nvidia graphics card?

Hi
I purchased a MacBook Pro 15inch iris pro Retina display version (£1599) recently.
Can we upgrade tit with Nvidia graphics card?
Thanks

In USA, you can return a Mac within 14 days of purchase and buy a new one with the desired spec.
Retina MacBook Pro cannot be upgraded once bought.
Best.

Premiere Elements 9 crashes with multiple NVIDIA graphics cards under Windows 7

I've just installed Premiere Elements 9 and found that it will not run at all with multiple NVIDIA graphics cards active under Windows 7. Per all the other discussions, I updated the NVIDIA drivers and Quicktime support to the latest versions. (NVIDIA version 260.99). I have both a 9400 GT and an 8400 GS installed, to support multiple monitors. They both use the same driver. The PRE 9 organizer will run, but as soon as I create or load a project it quickly crashes.
On a long shot I disabled the 8400 GS card in the Device Manager and now I can run PRE 9. Of course this means giving up one of my monitors. Any other ideas?

Over in the Premiere Pro area (or maybe it was in the Hardware section... didn't pay a lot of attention 'cause it really didn't matter to me) I read a message about using two nVidia cards with no problems (other than no dual-card SLI support)
I **think** that was with two SAME model nVidia cards
And, of course, PPro is completely different code, so PreEl may simply not work with two nVidia cards

Macbook Pro Retina 2014 Top Spec - Premiere Pro CC Graphics Card Issue

Hello,
For 12 months I have been having graphics card issues which all started on my 2011 MBP, which Apple replaced 12 months ago. I Then got a new shiny, 2013 highest end retina macbook pro from apple, in which after a couple of weeks had the exact same graphics issue. As soon as I start working in Premiere Pro with my 1080P DSLR footage, once the fans get up high, then the graphic colour hologram like start pooping on my screen. Now I got that retina replaced as I alerted apple about it, now they have given me the highest end 2014 model, and guess what? The problem is twice as bad.
I think it's definitely got something to do with the Apple software. It's weird though, because on the rare occasion, the graphic poop will show up on my screen when I am on Youtube (only once in a blue moon it does that) - it does it every single time 15-20 mins into editing with Premiere Pro, once the fans get hot. I can click on the graphics poop and it makes it disappear, which is weird, maybe that proves it software issue?
I don't know, but this problem has caused me to go through two of apples most powerful laptops, 60 phone calls to Apple, 1 investigation lodged to the Apple Engineers (the people who are above the Senior Apple Care Advisors) - Nothing seems to fix it, and I haven't been able to create any more intriguing films on my laptop because Premiere Pro CC just brings up all the graphics poop.
Screenshots:
http://imageshack.com/a/img537/653/IgdBK9.png
http://imageshack.com/a/img538/9601/WLQYnM.png
http://imageshack.com/a/img538/152/EIFd22.jpg
Does anyone know what causes this exactly? How do I fix it?

JGFilm88
Thanks for the follow up information for my video card/graphics card question that came to mind out of curiosity.
I do not have Premiere Pro and am strictly and Elements Windows user. Otherwise I would look into this matter for you first hand. The place you want to be is in the Adobe Premiere Pro Forum, although, as you already mentioned, the screen display irregularities have appeared when Premiere Pro was not being used. Have you tried uninstalling Premiere Pro to determine if its removal from the computer resolves the screen display irregularities for whatever you are doing in the computer applications like iMovie? For that matter, do you see the problem in iMovies?
Just some thoughts to think about as you compose your inquiry for the Premiere Pro users in the Premiere Pro Forum.
Best wishes
ATR

HP Envy 15t-J100 Nvidia Graphics card issue.

Similar Messages

Maybe you are looking for