HP ENVY 17-j021nr Notebook PC Need Display adapter drivers for Windows 10

I upgraded to Windows 10  64 bit.  After the install my side monitor did not come on.  I thought I would have to manually update the drivers. After going to the hp support site: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-17-Notebook-PC-series/5354973/model/5395122?sku=E0K86UA&ssfFlag=true#Z7_3054ICK0KGTE30AQO5O3KA30R1 I do not see any "video drivers" for my laptop. I also went to the Nvidia site, Downloaded and installed the drivers for the Nvidia Geforce GT 740m but that did not work. I did the "clean intall" option. I Called HP support. They said that i needed a higher level of support and transfered me to a different department. This unknown to me named department states that there is a fix for this. That I would have to pay for at least 1 day of support so they could remote into my system and correct the issue. I said how much? They said $100 I simple need drivers that will work for my video card so that I can start using the HDMI output on my laptop.  I need the Nvida card to operate at peak performance at some point but for now I am simply asking for compatible display adapter dri vers.

I am having the same problem withmy display adaptors after updating to windows 10. I can't find any fix online. I think HP has not yet built an update for my driver. If anyone can help, please HELP!!! my driver is an AMD Radeon HD 8400 R3 Series.

Similar Messages

  • Need wireless lan drivers for(Windows 7 64 bit) HP 15-d009tu Notebook PC

    Thanks Sir for Your great Help... I have done it
    if possible please also give the link to the following drivers
    chipset
    audio
    vga
    lan (Full)
    USB driver
    thanks again
    Manoj Kumar Mohanta

    Hi:
    HP does not support consumer notebooks for 32 bit operating systems.
    Try the W7 32 bit drivers and software from the HP Probook 450 G0, except the BIOS, firmware, audio and graphics drivers.
    http://h20565.www2.hp.com/hpsc/swd/public/readInde​x?sp4ts.oid=5359406&swLangOid=8&swEnvOid=4052
    To install the graphics you need to:
    1. Install the Intel chipset installation utility and reboot.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5359406&swItemId=ob_118468_1&swEnvOid=405​...
    2. Install the Intel HD graphics driver and reboot.  First file listed is the auto install.
    https://downloadcenter.intel.com/download/24346/In​tel-HD-Graphics-Driver-for-Windows-7-8-8-1-32-bit
    3. Install the nVidia graphics driver and reboot.
    http://www.nvidia.com/download/driverResults.aspx/​83081/en-us
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT​...

  • Need Palm Bluetooth Drivers For Windows 7 64 Bit

    Hi,
    I am a long time Palm Pilot user and I have been there through all the trials and tribulations.  I have just bought a new computer running Windows 7 Home Premium 64-Bit edition and I am trying to find the drivers for Bluetooth sync.
    I am using a Palm Tungsten E2 and the Palm OS 6.2 and with the computer I am currently using (Windows 7 Home Premuim 64-Bit)  I sync via Bluetooth and never had any problems and want to keep it that way.
    WyreNut and several members did a lot of work when Windows 7 first came out and helped a lot fo people with synch issues.  I have searched the Forums and cannot find a link to where I can download the Bluetooth drivers so I can synch my Palm Pilot via Bluetooth to my new computer.
    If someone could kindly point me to where I can get the Bluetooth drivers I will be grateful.  Thanks so much.

    CompDave1 wrote:
    I am a long time Palm Pilot user and I have been there through all the trials and tribulations.  I have just bought a new computer running Windows 7 Home Premium 64-Bit edition and I am trying to find the drivers for Bluetooth sync.
     I am using a Palm Tungsten E2 and the Palm OS 6.2 and with the computer I am currently using (Windows 7 Home Premuim 64-Bit)  I sync via Bluetooth and never had any problems and want to keep it that way 
    WyreNut and several members did a lot of work when Windows 7 first came out and helped a lot fo people with synch issues.  I have searched the Forums and cannot find a link to where I can download the Bluetooth drivers so I can synch my Palm Pilot via Bluetooth to my new computer.
    If someone could kindly point me to where I can get the Bluetooth drivers I will be grateful.  Thanks so much.
    Hi, please clarify as it sounds like both your old and new computers are the same OS.
    As you know, the E2 has Bluetooth built-in.  There are no Bluetooth drivers to download.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Need Drivers for windows 10 x64

    Hello, I need the proper drivers for windows 10 x64 for my probook 450 g1 laptop. I got the drivers from this page: http://us-support.external.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5405166&swLangOid=8&swEnvOid=4192all the drivers are not present here like display, hot keys etc. So it will be very helpful to me if someone helps me to get those drivers. Thanks in advance.

    From Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support please use Boot Camp Support Software 5.1.5640.
    You can use Boot Camp: Install or repair Boot Camp drivers for Repair.

  • Problem with drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA)

    Hello
    Please help to find drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA) for:
    1) ACPI\HPQ6007
    2) USB\VID_138A&PID_0050&REV_0060
    It is detected as "unknown devices"

    Hi:
    You need these drivers...
    ACPI\HPQ6007:
    HP 3D DriveGuard Software
    File name: sp67280.exe
    USB\VID_138A&PID_0050:
    Validity Fingerprint Sensor Driver
    File name: sp66110.exe

  • Graphics drivers for windows 7 compatible with hp notebook pc 500

    iplz recommend me graphics drivers for windows 7 compatible with hp notebook pc 500

    Hi:
    Download and run this driver.  You will probably get an unsupported operating system error.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=447304&swItemId=ob_47264_1&swEnvOid=2096
    Close out of any error windows.
    Go to the device manager and click on the video controller needing drivers.
    Click on the driver tab.  Click on update driver.  Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file.
    That folder will be located in C:\SWSetup\sp34749.
    Make sure the Include Subfolders box is checked and the driver should install.
    Reboot and your graphics should be working normally.
    You will not have Windows aero because the Intel GMA 900 graphics adapter is not 100% Vista or W7 capable but at least you will be able to change the screen resolution and have graphics acceleration enabled.

  • Need Win 8 Drivers for Qosmio X300-14X (PQX31E)

    Hi,
    I had to format my notebook and i'm in need of some drivers for Windows8 64bit.
    Does anybody can give me those?
    Device Name: Coprocessore
    Hardware ID
    PCI\VEN_10DE&DEV_0AA3&SUBSYS_FF001179&REV_B1
    PCI\VEN_10DE&DEV_0AA3&SUBSYS_FF001179
    PCI\VEN_10DE&DEV_0AA3&CC_0B4000
    PCI\VEN_10DE&DEV_0AA3&CC_0B40
    Can anybody help me with this?

    Hi
    Its easy to find out what the devices needs the drivers.
    The VEN ID and DEV ID can be checked here:
    http://www.pcidatabase.com/index.php
    PCI\VEN_10DE&DEV_0AA3
    This means the nVidia nForce 730i SMBus Controller
    Recommend installing the nVidia Chip Set Utility and nVidia graphic card driver
    On the Toshiba EU driver page you can find the version for Win 7. Try it!

  • Need BootCamp Drivers for Windows Vista!

    Hi Guys, I lost my bootcamp installation disk for the Windows Drivers. I have OSX 10.6.3 and boot camp 3.0.2 on an imac G5 Intel duo. Please help me, I need drivers for Windows Vista . Thanks

    have you looked on the bootcamp install list?
    http://support.apple.com/downloads/#macoscomponents

  • Needs to be configured for Windows... but it already is!

    I just bought a brand new 80GB iPod Classic today. I hooked it up to my laptop's USB port, and the first time it showed up in my iTunes directory. Unfortunately iTunes informed that my iPod was corrupted, so I restored it. This happened TWICE.
    The third time I hooked it up, the iPod didn't show up in the directory, but a pop-box appeared telling me that the iPod needed to be configured for Windows, and would I like to configure now? I clicked yes, and nothing happened. Once I checked the iPod, I saw that the Version was 1.0.2. PC.
    Any ideas how to get my iPod up and running? Thanks in advance.
    iTunes version: 7.4.3.1.
    iPod version: 1.0.2. PC

    You need to connect your phone to iTunes on your COMPUTER, not on your phone.

  • I get a message saying that my ipod needs to be formatted for windows

    I originally used my ipod on my pc, but now I want to use it on my laptop. I connected it to my laptop, and I got a message saying something like “your ipod needs to be formatted for windows, would you like itunes to reformat your ipod?” I don’t understand why it’s saying that I need to format it for windows when I have always been using it on windows. I use mediamonkey to transfer my files, and when I click on the ipod in mediamonkey, no songs show up. How can I get mediamonkey to recognize the songs on the ipod without reformatting my ipod (I don’t want to erase all the songs)?
    Thanks.

    Hmm..Here's a few options:
    ~Hopefully you can see your Ipod under My Computer.
    1. Enable the viewing of hidden files, then browse to (let's call it I:/ drive.)
    I:/YourIpod_Name/iPodControl/Music
    Copy the whole music folder to your desktop or somewhere safe. That folder contains all your songs, though they will have names such as HGB3.mp3.
    (Enable Hidden Files<Under Advanced View>: Control Panel>Appearance and Themes>Folder Options>View Tab>Show Hidden Files and Folders)
    ~If it doesn't appear under My Computer or if it does.
    2. Use a third-party software program to get the songs from your Ipod to a folder on your computer. This will get the songs from your Ipod with the correct artists and names. Not sure if posting links to third-party software is 'legal', but here it goes:
    http://download.cnet.com/iDump/3000-2169_4-10407429.html
    I use this one to keep a backup of my songs from time to time. It's best to keep the backup on an external drive just in-case you HD dies.
    If your still not able to get a backup of your songs, well that's all I have right now. Maybe you can wait for other replies, or just go ahead and format it(but you lose your songs).
    Now to restore:
    Let's see why it isn't appearing under iTunes.
    Open up iTunes with your ipod connected, ignore anything that may pop up. Click the tab called 'Help' and then 'Run Diagnostics...'. Check only the two last boxes:
    -Iphone/Ipod connectivity tests
    -Iphone/Ipod touch sync tests
    Hit next, again make sure your ipod is connected...next one more time.
    You should pass all tests for connectivity.
    Now sync, which you should fail.
    Apple wrote:
    This feature tests iPod and iPhone connectivity on a Windows PC running iTunes. Except for syncing, the diagnostic tests in iTunes do not test the hardware or software on the iPod/iPhone.
    If any problems occur under the connectivity tests, post here.
    If your up to losing your songs, your ipod is treated like a volume so right-click > format, should format it, deleting everything. When connected to iTunes, it should present the option to restore.
    ^I can say this, because I've done it, but I don't know if the outcome will be the same for you.

  • I have i mac system, need all drivers for windows?

    I have I Mac system and i installed windows vista ultimate edition, i require all drivers for windows vista

    It is installed (I installed Windows....)
    Everything you need to know was in Boot Camp Assistant, the drivers are on OS X DVD (while in Windows)
    HERE:
    http://www.apple.com/support/bootcamp has FAQ How To Manual articles and updates for AFTER yu have Boot Camp 3.0 installed
    If you bother to read the instructions first would save you and us a lot of repeating.
    You also want Microsoft Security Essentials Vista SP2+ (Windows 7 64-bit would be better and supported) and make sure you have about 15-20GB free space on Windows. All the updates will eat up 10GB of temp space, plus page and other items

  • I need all the drivers for Hp15 r007tx windows 7 32 bit

    Dear Team,
    I have purchased hp 15 r007tx and need all the drivers for it. I have installed windows 7 32 bit on it.Plz give me the link.
    This question was solved.
    View Solution.

    The above images are the sample of error message that i get once i update windows 7 or i reboot after installing a driver. The images are only sample not the actual error messages.

  • Need to download drivers for canon MP 280 for macbook pro

    I need to download drivers for canon MP 280 for macbook pro how do i go ...

    Welcome to Apple Support Communities
    As you can see, that printer is compatible > http://support.apple.com/kb/ht3669
    To get the drivers for that printer, you just have to add the printer to OS X, following these steps > http://support.apple.com/kb/PH11145 OS X will download automatically the driver for your printer after adding it to the printer list. Or you can download the Canon drivers from the Apple website > http://support.apple.com/kb/DL899
    You don't need to get drivers from the Canon website. The Apple drivers are sufficient to make the printer work, although you may find software in the Canon website that you may want

  • Before I install MX922, do I need to uninstall drivers for MP800 first?

    My MP800 is out after many years of service due Error Code 6500. Before I install MX922, do I need to uninstall drivers for MP800? Or just install MX922 as normal? Running OS X 10.10 Yosemite on Mac mini. I want my scanned images done by MP800 to remain on my mac of course. Thanks.
    Solved!
    Go to Solution.

    Hi pmt513,
    You don't have to uninstall the drivers for the PIXMA MP800 prior to installing the PIXMA MX922; however, if you would like to, you can reset the printer system on your Mac to uninstall the drivers without removing the scanned images.  To do this, please follow these steps:
    1. Choose Apple menu > System Preferences, then click Printers & Scanners.
    2. Hold down the Control key as you click in the list at the left, then choose “Reset printing system” from the menu that appears. After you reset the printing system, the list of printers in Printers & Scanners preferences should be empty. If your printer is still listed on the left select your printer and then click the minus (-) button to delete it.
    3. Restart your Mac.
    You can now install the drivers for the PIXMA MX922.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Need help with drivers for Satellite A210-186

    Hi,
    I have a Satellite A210-186 and i can't find drivers for Windows XP. Can anybody tell me where to find drivers for XP?

    Hi,
    if you follow this [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU] you will reach the Drivers Download site. But I must warn you, , momentarly there except for Wireless and the Display no other drivers available. Either they will upload the other one or you will have to search for the remaining drivers in the internet (like LAN, flashmedia, etc..)
    But I think they should update the section soon and make the drivers available for us..
    Greets

Maybe you are looking for