Hp envy 180 case light question.

hey hp i was looking at your hp envy phoenix 810 model, and was wondering have you thought about other colour lights for front case and fan, like blue or green future model pc?

Raptor106, welcome to the forum.
This is a peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP.
I am certain that HP would like to hear your suggestions if you wrote to them.
Personally, however, I like the red lights in my Phoenix 810.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

HP Envy 120 scanner light fault

Hi,
When I try to copy and scan a document all I get is vertical coloured lines. I have tried all the trouble shooting solutions, but the problem still exists and I beleive that there must be a problem with the scanner lights as they are not lit when the scaner bar moves across the scanner glass. I bought this printer in July last year so it is only 16 month old and I am very disapointed that it has alerady stopped wroking properly. I use this printer for business purpose as I am working from home and now this really frustrates me. Since I am out of warranty I tried to search for a HP authorised service provider located in Nottingham, but I cannot find any on the web. I understand that it would be cheaper to buy a new one instead of having this one repaired, but the printer and wireless functions are working fine and I have sepcifically bought a HP printer beacuse of HP reputation of good quality of product. But as I can see from reading feedback from other HP Envy users this might not be the case for this model.
Can you please advise how I can get my printer serviced in the UK, preferably in Nottingham? Thanks in advance for your kind response.

Hi X-23,
I hope you see this as your private e-mail sollution was a great success!
Thank you so very much for your assistance and participation on this blog.
Have a great day!
Cytogreg

Case Lights`

My case is looking a little bare - naturally it needs some light!
So, I'm thinking blue. However I have a few questions. Are there tubes which change colour? How got to tubes get? Any recommended products and any I should avoid? How do I fasten them inside my case?
Thanks
Tom

The tubes don't get very hot. CCFL stands for Cold Cathode Fluorescent Light for a reason [that is to say, they stay a little above room temperature. it's like cold fusion works at around room temperature. hot in this case is... too hot to touch, ish]
One thing to keep in mind is that a single blue/red/green/white CCFL will light up an entire room from inside your case window. Two will be super bright. So if you plan on going to sleep with this thing in your bedroom, my advice would be to stick with just one cathode. You can always buy another if you think you need it.
UV lights are much dimmer, and if you have any UV reactive components (or want to buy some), that can make for some very cool effects, and you want two of those
Cheers

Free cases issue + question

I just watched the PC, and Steve said that we would receive free cases. He said that next week Apple would have a site up that allowed you to choose which case you wanted to get for free. Bumpers aren't the only ones that are being given away. There will be some other cases from other brands that will be available. This is due to the factory not being able to produce the bumpers quickly enough.
Hope that clears up some questions.
Here's a question of my own. Will we be able to input, say, an order number and be able to register for a case and have them send the case together with the phone or will we have to register after the phone is sent?

Thanks for the info!! The cheap (|) case I have does not work very well as it
comes off every time, but it works great as I haven't had too many dropped calls. Funny thing is most of my dropped calls is because I am in part of a crappy area for AT&T.

Need Help on using Forge Config Manager and CAS. Questions listed in the content below

Hi All,
I have an existing Endeca pipeline implementation where we read the data sets (Product Catalog Information) from Oracle database using JDBC adapters. The data set undergoes a series of manipulation until it gets indexed to the Endeca system. We make use of PCI for dimensions and dimension values. However, we now want to extend PCI to also include the Product catalog information. The current implementation also does not make use of CAS adapters to consume the dimensions data in PCI. The next consideration is to implement PCI as close to Out of the Box provisions and standardize it. Therefore we are also considering to implement CAS.
The questions are as below:
1. What are the ideal parameters that should support the use of PCI implementation (Dataset + dimension + precedence Rules + schema information) ? Note: We DO NOT have any product catalog system (like ATG) between database and Endeca.
2. Considering that we do not have any product catalog system to organize and maintain data, how feasible is it to read directly from database through CAS Adapters and process the data ?
3. We also plan to introduce partial update pipeline in future releases. Keeping that in mind should CAS based approach help us to read from a record store at the time of partial updates ?
4.in case we are limiting to a business case of implementing partial updates in the above explained existing design, should a custom CAS approach be a better design ? Custom CAS approach = writing the baseline output data to record store and later referring it at the time of partial updates.
5. Will CAS based approach help to reduce the baseline timings ?
6. What is the best way to export data to record store instance in the above design ? (Record store API / Command line utility / CAS crawl)
Thanks,
Nitin

Hi Neeraj,
You cam use both PI SLD and Solman Local SLD for LMDB synchronization. Now here you make to make sure that correct ranks are assigned to PI and Solman SLD. With the help of multiple sld, you can remove the cause of concern. Local SLD should always be of solman.
For CR content. that you can do for solution manager system in a click.
Divyanshu

Power Mac 8500/180 LCD monitor question

A friend has a Power Macintosh 8500/180 and wishes to upgrade the monitor from the huge CRT it is now using to LCD.
Looking at the specs of this machine it has a DB15 display port, which it seems can output via VGA via an adapter such as this: http://www.lindy.co.uk/shop/showProductDetail.do?orderNumber=70187&source=search. Can anybody confirm whether this should work?
I also seem to remember that in years gone by Mac's were only compatible with Multisync monitors. Is this the case with LCD? In other words, would any old LCD work, or should a multisync LCD be purchased?
Likewise, would a driver be required, and would it matter if the monitor was widesceen?
Many thanks
Darren

The 8500 has a couple of hardware limitations beyond the physical conversion of the VGA cable for connection to the DB-15 port. (1) The 8500's onboard video support/VRAM is maxed out at 4 MBs, which is not really adequate for a modern display. (2) LCD displays have a native resolution/refresh, so the computer's onboard graphics controller or add-in graphics card should support those specs for optimal viewing quality. A widescreen display with a 16:9 aspect ratio further complicates the support capabilities of an older graphics card. What OS is your friend running on the 8500? The expense of adding a modern Mac-compatible graphics PCI card for a widescreen display well exceeds the value of an 8500 today. If a display with the older 4:3 aspect ratio is used, a more capable graphics card may be needed, but one that's not so current/expensive. Used Mac-compatible graphics cards, like an ATI Orion, Nexus, or the made-for-Apple ATI Rage 128 (pulled from a Blue & White G3) aren't too expensive and all of these cards have a VGA port, eliminating the need for the adapter. Your friend can always try connecting a 4:3 LCD display to the onboard DB-15 monitor port, via the adapter that you linked. Getting the DIP switches set correctly is the trick.

Windows does not fully shutdown--case lights and fans remain on

Hi all.
My computer (Win 7 64-bit) is not shutting down properly. When I click "Shut Down," Windows appears to carry out the shut down process, and the display then goes blank. But power to
my case persists; fans and LED lights remain on. I have no idea if this is even a hardware (motherboard, power supply, conflict) issue or software issue (OS, BIOS, etc). Any ideas how I can pinpoint/troubleshoot the problem?
I tried booting into safe mode and shutting down from there, but after a couple seconds the process then froze on the Windows Shut Down screen.
My system specs are:
Motherboard: Gigabyte GA-P67A-UD3R-B3 (rev 1.x) (latest version of BIOS is installed)
BIOS: Latest for my motherboard (F9 I believe)
Processor: Intel Core i7
Memory: 8 GB DD3-1600 (4 x Kingston KHX1600C9D3K2)
Hard Drive: Western Digital Caviar Blue 1TB WD10EZEX (brand new)
Power supply: 700W Stronger SPSN-070P
GPU: Radeon 6850
This is a fresh Windows install, and all Windows updates are up-to-date
Thanks in advance.

OK below my event logs for the shutdown process, from 2 different systems: the system with the shutdown issue (system 1) and a system with working shutdown (system 2). The broken system reports 1 error during shutdown:
The Superfetch service terminated with service-specific error The operation completed successfully..
I can share the details from the event viewer if you'd like, but it's a lot of gibberish. The most interesting would be:
[Name] Service Control Manager
[ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4
Unfortunately they are not identical systems They are both running Win 7 32 bit, but the broken system (system 1) has no Windows Updates and no extra software installed. The working system is up to date with Win updates, and has some more software
installed. I also have event log (*.evtx) files of each shutdown process, showing details.
Here are the full logs:
System 1: Broken shutdown
Information 1/20/2015 7:33:15 PM
Microsoft-Windows-Kernel-General
13 None
The operating system is shutting down at system time ‎2015‎-‎01‎-‎20T12:33:15.375698400Z.
Information 1/20/2015 7:33:11 PM
Microsoft-Windows-Kernel-Power
109 (103)
The kernel power manager has initiated a shutdown transition.
Information 1/20/2015 7:33:11 PM
Service Control Manager
7036 None
The Windows Search service entered the stopped state.
Information 1/20/2015 7:33:10 PM
Service Control Manager
7036 None
The Plug and Play service entered the stopped state.
Information 1/20/2015 7:33:10 PM
Microsoft-Windows-UserPnp
20010 (7010)
"One or more of the Plug and Play service's subsystems has changed state.
PlugPlay install subsystem enabled: 'false'
PlugPlay caching subsystem enabled: 'false'
Information 1/20/2015 7:33:10 PM
Service Control Manager
7036 None
The Cryptographic Services service entered the stopped state.
Information 1/20/2015 7:33:10 PM
Service Control Manager
7036 None
The Windows Management Instrumentation service entered the stopped state.
Information 1/20/2015 7:33:10 PM
Service Control Manager
7036 None
The Software Protection service entered the stopped state.
Information 1/20/2015 7:33:10 PM
Service Control Manager
7036 None
The Distributed Link Tracking Client service entered the stopped state.
Information 1/20/2015 7:33:10 PM
Service Control Manager
7036 None
The Desktop Window Manager Session Manager service entered the stopped state.
Error 1/20/2015 7:33:10 PM
Service Control Manager
7024 None
The Superfetch service terminated with service-specific error The operation completed successfully..
Information 1/20/2015 7:33:10 PM
Service Control Manager
7036 None
The Superfetch service entered the stopped state.
Information 1/20/2015 7:33:10 PM
Service Control Manager
7036 None
The Diagnostic Policy Service service entered the stopped state.
Information 1/20/2015 7:33:10 PM
Service Control Manager
7036 None
The Windows Event Log service entered the stopped state.
Information 1/20/2015 7:34:11 PM
EventLog 6013
None The system uptime is 10 seconds.
Information 1/20/2015 7:33:09 PM
Service Control Manager
7036 None
The Diagnostic Service Host service entered the stopped state.
Information 1/20/2015 7:34:11 PM
EventLog 6005
None The Event log service was started.
Information 1/20/2015 7:33:09 PM
Service Control Manager
7036 None
The User Profile Service service entered the stopped state.
Information 1/20/2015 7:34:11 PM
EventLog 6009
None Microsoft (R) Windows (R) 6.01. 7600 Multiprocessor Free.
Information 1/20/2015 7:33:09 PM
Service Control Manager
7036 None
The DHCP Client service entered the stopped state.
Information 1/20/2015 7:33:09 PM
Service Control Manager
7036 None
The Power service entered the stopped state.
Information 1/20/2015 7:33:09 PM
Service Control Manager
7036 None
The Human Interface Device Access service entered the stopped state.
Information 1/20/2015 7:33:09 PM
Service Control Manager
7036 None
The Diagnostic System Host service entered the stopped state.
Information 1/20/2015 7:33:09 PM
Microsoft-Windows-Dhcp-Client
50037 Service State Event
DHCPv4 client service is stopped. ShutDown Flag value is 1
Information 1/20/2015 7:33:09 PM
Microsoft-Windows-DHCPv6-Client
51047 Service State Event
DHCPv6 client service is stopped. ShutDown Flag value is 1
Information 1/20/2015 7:33:09 PM
Service Control Manager
7036 None
The Group Policy Client service entered the stopped state.
Information 1/20/2015 7:33:09 PM
Microsoft-Windows-Winlogon
7002 (1102)
User Logoff Notification for Customer Experience Improvement Program
Information 1/20/2015 7:33:09 PM
EventLog 6006
None The Event log service was stopped.
Information 1/20/2015 7:33:09 PM
USER32 1074
None "The process C:\Windows\system32\winlogon.exe (DUSKWOOD) has initiated the power off of computer DUSKWOOD on behalf of user duskwood\snarl for the
System 2: Working Shutdown
Information 20/01/2015 11:15:29
Microsoft-Windows-FilterManager
6 None
File System Filter 'aswSP' (6.0, ‎2014‎-‎11‎-‎18T16:06:36.000000000Z) has successfully loaded and registered with Filter Manager.
Information 20/01/2015 11:15:27
Microsoft-Windows-FilterManager
6 None
File System Filter 'aswSnx' (6.0, ‎2014‎-‎11‎-‎21T18:16:29.000000000Z) has successfully loaded and registered with Filter Manager.
Information 20/01/2015 11:15:15
Microsoft-Windows-FilterManager
6 None
File System Filter 'FileInfo' (6.1, ‎2009‎-‎07‎-‎14T06:21:51.000000000Z) has successfully loaded and registered with Filter Manager.
Information 20/01/2015 11:15:15
Microsoft-Windows-Kernel-General
12 None
The operating system started at system time ‎2015‎-‎01‎-‎20T04:15:15.375199800Z.
Information 20/01/2015 11:14:17
Microsoft-Windows-Kernel-General
13 None
The operating system is shutting down at system time ‎2015‎-‎01‎-‎20T04:14:17.541276400Z.
Information 20/01/2015 11:14:11
Service Control Manager
7036 None
The Windows Image Acquisition (WIA) service entered the stopped state.
Information 20/01/2015 11:14:11
Microsoft-Windows-Kernel-Power
109 (103)
The kernel power manager has initiated a shutdown transition.
Information 20/01/2015 11:14:08
Service Control Manager
7036 None
The Windows Search service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Intel(R) Management and Security Application Local Management Service service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The avast! Antivirus service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Superfetch service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Volume Shadow Copy service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Windows Modules Installer service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Windows Font Cache Service service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The IKE and AuthIP IPsec Keying Modules service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Cryptographic Services service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The WLAN AutoConfig service entered the stopped state.
Warning 20/01/2015 11:14:07
Microsoft-Windows-WLAN-AutoConfig
4001 None
"WLAN AutoConfig service has successfully stopped.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Software Protection service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The IPsec Policy Agent service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Windows Defender service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Windows Management Instrumentation service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Windows Event Log service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Microsoft Software Shadow Copy Provider service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Security Center service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Function Discovery Resource Publication service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Extensible Authentication Protocol service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Distributed Link Tracking Client service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Intel(R) Management and Security Application User Notification Service service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Desktop Window Manager Session Manager service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Office Software Protection Platform service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The User Profile Service service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Plug and Play service entered the stopped state.
Information 20/01/2015 11:14:07
Microsoft-Windows-UserPnp
20010 (7010)
"One or more of the Plug and Play service's subsystems has changed state.
PlugPlay install subsystem enabled: 'false'
PlugPlay caching subsystem enabled: 'false'
Information 20/01/2015 11:15:50
EventLog 6013
None The system uptime is 35 seconds.
Information 20/01/2015 11:15:50
EventLog 6005
None The Event log service was started.
Information 20/01/2015 11:15:50
EventLog 6009
None Microsoft (R) Windows (R) 6.01. 7601 Service Pack 1 Multiprocessor Free.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Power service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The PDQ Deploy service entered the stopped state.
Information 20/01/2015 11:14:07
Service Control Manager
7036 None
The Human Interface Device Access service entered the stopped state.
Information 20/01/2015 11:14:06
Service Control Manager
7036 None
The Diagnostic Service Host service entered the stopped state.
Information 20/01/2015 11:14:06
Service Control Manager
7036 None
The Diagnostic Policy Service service entered the stopped state.
Information 20/01/2015 11:14:06
Service Control Manager
7036 None
The DHCP Client service entered the stopped state.
Information 20/01/2015 11:14:06
Microsoft-Windows-Dhcp-Client
50037 Service State Event
DHCPv4 client service is stopped. ShutDown Flag value is 1
Information 20/01/2015 11:14:06
Microsoft-Windows-DHCPv6-Client
51047 Service State Event
DHCPv6 client service is stopped. ShutDown Flag value is 1
Information 20/01/2015 11:14:06
Service Control Manager
7036 None
The Diagnostic System Host service entered the stopped state.
Information 20/01/2015 11:14:06
Service Control Manager
7036 None
The Bonjour Service service entered the stopped state.
Information 20/01/2015 11:14:06
Service Control Manager
7036 None
The AMD External Events Utility service entered the stopped state.
Information 20/01/2015 11:14:07
EventLog 6006
None The Event log service was stopped.
Information 20/01/2015 11:14:06
Service Control Manager
7036 None
The Group Policy Client service entered the stopped state.
Information 20/01/2015 11:14:06
Service Control Manager
7036 None
The Windows Update service entered the stopped state.
Information 20/01/2015 11:14:05
Microsoft-Windows-WindowsUpdateClient
27 Windows Update Agent
Automatic Updates is now paused.
Information 20/01/2015 11:14:05
Microsoft-Windows-Winlogon
7002 (1102)
User Logoff Notification for Customer Experience Improvement Program
Information 20/01/2015 11:14:05
USER32 1074
None "The process C:\Windows\system32\winlogon.exe (TEACHER) has initiated the power off of computer TEACHER on behalf of user TEACHER\LENOVO for the following reason: No title for
this reason could be found
Reason Code: 0x500ff
Shutdown Type: power off
Comment: "
Information 20/01/2015 11:14:02
USER32 1074
None "The process Explorer.EXE has initiated the power off of computer TEACHER on behalf of user TEACHER\LENOVO for the following reason: Other (Unplanned)
Reason Code: 0x0
Shutdown Type: power off
Comment: "
Information 20/01/2015 11:13:52
Microsoft-Windows-Eventlog
104 Log clear
The System log file was cleared.

Nikon NEF's and Active D-Lighting question

Not being sure how Aperture handles Active D-Lighting NEF's, so I think it might be best to leave it off in camera for NON Nikon software.
Thoughts from anyone? How do people here process Nikon NEF's in Aperture?
Nikon D300 user.

aperture pulls the raw data ... not any in camera settings that would be applied as part of the camera's or manufacturer's processing ... this is the case with ALL 3rd party RAW converters ... your sensor gives the raw data ...
the as shot WB is used, but since it is RAW you can change that ...
musicmaker wrote:
So all of the settings I do on the D300 are worthless to Aperture.
so yeah ... worthless ... if that is what you wanna call it ... why bother with post processing a RAW image if you want all your parameters set by the camera during the shoot ... you'd be better off sticking with JPEG ...
find me another RAW converter that can read proprietary camera manufacturers in camera settings (saturation, contrast, sharpness, etc) and i will gladly apologize ...

IMac G5 17" power light question

Should it be on all the time when the computer is in use, or only lit, slowly pulsing, when sleeping?

This is getting confusing. I thought that was so also, but found this kb article after posting
http://support.apple.com/kb/HT3016 which would seem to indicate otherwise. Reason for question is that after getting computer back from (problematic) repairs, I noticed no power light when in operation. Only in sleep mode. The tech thought this was normal. Now I don't know what to think.

PC 2.5: Delete cases/survey questions

Hi all,
In order to test some functionalities of PC I scheduled some surveys a few month ago.
I'm trying to delete all the questions, surveys and cases that I have created.
I tried to use program RHRHDL00 but I didn't find these attributes as parameters.
Note: i have customized lots of master data that i don't want to loose.
Any idea?
Best regards,
Julien

Julien,
I assume you are talking about a dev or QA system. It is my understanding you can't delete a question if it is in a survey and you can delete a survey if it has been used (a key control for audit purposes). That said you could go into the IMG under administration programs and "Execute Administration programs for PC workflows" and go into 'delete cases and workflows". You should be able to find whatever you want to delete in here and in theory you should be able to delete subsequent objects. I haven't done this so I'm not exactly sure if it will work. You will have to delete everything for each survey. Depending on your environment, this could be a very difficult task.
Personally, I would just mark the survey(s) and/or questions inactive and just forget about them. There are so many interdependencies on the backend that performing these types of changes might turn out to cause more trouble than they are worth. You could quickly find that other, unanticipated things go "sideways" after making manual backend workflow/case changes (like performing signoff).
Matt

Case Escalation Question

I was informed (after 7 months of various support tickets and 2 depot center repairs) that our case would finally be escalated. I was told I would be contacted early this week. It is now Thursday, and I haven't heard a peep from Lenovo since the call that resulted in the escalation last week. When do I start to worry? Is there a seperate department I should contact regarding this? We have 9 of these laptops all with the same issue and it makes us look very incompatent to our employees that are still, after 7 months, having to use these "faulty" laptops. I have heard many a horror story about Lenovo's escalation process. Any advice would be greatly appreciated.
Thanks!

Hi fat_apollo,
I hope you are doing well. I just wanted to check in and see if you still need assistance.
Please let me know and I will do all that I can to help.
All the best,
Josh Mason
Lenovo Social Media Customer Service
Want to know how to send a PM? Please go here.
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community

Case mod question

Hello everyone.
Currently I have a k8t motherboard with this case http://www.modthebox.com/review292_1.shtml and I am wondering if it is safe to redo the two front led lights behind the eyes and connect them to the HD LED on the moatherboard ?
The reason I ask is I and new to modding do not want to burn out my motherboard if it will not work though I think it would since the led lights use only 2 wires to light up currently.

most of the time you can find that info in your Manual for MB, but if not most take 5V reverse and type 3.3v and for the leds in the case, if the manufacturer has no info, then don't worry about it. they all follow similar guidelines to do all this. I use to do similar mods and never burned anything. Of course if you really want to be sure about the volts you can spend 70-100+ on equipments that will tell you that and more. But no need. just give it a shot, you will be fine.

CAS (array) questions redux

I have a single Exchange server, where Get-Mailboxdatabase reports that the RPCClientAccessServer is servername.domain.local
I'm currently having a certificate mismatch due to using a wildcard certificate, this only manifests as an error popup when you first start Outlook. Mail works fine, as do calendars - but I want to get rid of that pop-up.
I'm already doing a split-brain DNS for EWS and so forth - mail.domain.com resolves to an internal IP internally and an external IP externally through a "real" DNS entry that's Internet-facing, and this way neither users internally or externally
get certificate errors and everything works - EAS, OWA etc. So it's just this internal issue left.
The question I have is that I read something about it being a bad idea to use the same DNS name for CAS if the same address is externally resolvable (which it would be in this case). Does setting RPCClientAccessServer affect external clients too?
Should I create a second split brain DNS entry instead, like mail-internal.domain.com and point that at servername.domain.local just to use for CAS?
The second part of this question - can I just do: Set-MailboxDatabase MailboxDatabaseName -RpcClientAccessServer “mail.domain.com” and walk away, ie skip the CAS array creation entirely if I were to choose that, assuming mail.domain.com resolves internally
to servername.domain.local?
Or should I definitely create the array and use that instead even though this is a single-server environment?
Thanks.

Indeed!
http://blogs.technet.com/b/exchange/archive/2012/03/23/demystifying-the-cas-array-object-part-1.aspx is what Will is referring to.
No, it is not that simple of just changing it and walking away.
Is this Outlook 2013 by any chance?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Envy m7-k211dx msata questions

I would like to add an msata drive to my Envy m7-k211dx. I have read the laptop's maintenance and service guide but I dont have clear answers to my questions (as the guide refers to 3 laptop series): 1) Can I add an msata drive to my laptop?2) Is the msata drive used for caching only or can I install Windows on it?3) Can I buy a standard msata drive from Amazon, eBay etc or must it be from HP?
Thanks.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Envy m7-k211dx Notebook and MSATA questions. You do not see this in your service guide(page 102) as a supported drive as it is not supported with your Notebook. Typically the MSATA drives with our notebooks are designed to be Cache drives only. Your interface connection type is Sata and the Disc rotation speed is 5400. Some Notebooks may not give you the option to use it as an Operating System drive as you can't boot to them. Some might, so it's hit or miss. You could order parts at HP by entering in your serial number. An external Hard Drive might work better for you. I hope this helps. Thanks.

Vaja case ivolution question

Anyone have this case. I stumbled upon vaja's website and their ivolution looks pretty cool. I have some questions regarding that.
1. Speaker, I'm concerned when making phone calls, that hearing the conversation will be more difficult, you're ear is now farther away from speaker. I googled the ivolution for the iPhone and saw one or two complaints
2. Dust, will dust get inbetween the material and the phone? I have the incase slider now, and I take it off to clean the dust off by the seam of where the phone and the case meet
3. Pocket use, I keep the phone in my pocket, does the form factor of the iVolution inhibit this, is it too bulky?
Its a bit pricey, but its a sharp looking case, so if anyone has any thoughts or suggestions I would greatly appreciate the feedback.

I have owned Vaja cases for other products but not the iPhone. I will tell you that any case adds bulk and you will notice it. This case looks thicker then other leather cases of the past - as thick as some hard shell plastic cases.
I would think sliding it in and out of a pocket would be hard to do. You will definitely get dust around the edges and have to take it out to clean it - especially if you are slipping it into a pocket. Pockets seem to hold lint and dust.
I don't think hearing would be a problem though. Vaja makes a fine case, but i decided on none. I have gotten tired of buying accessories for every new phone that add up to more then the phone.

Hp envy 180 case light question.

Similar Messages

Maybe you are looking for