HP Envy 6 - 1003tx Laptop - Cannot install New Window

Hi,
I have HP Envy 6 - 1003tx Laptop accidently my laptop's hard disk was formated, I tried to install the new operating system on my laptop but at the end of installation there is an error coming that "Windows setup could not configure windows to run on this computer’s hardware" so please kindly help me to install a new windows....
Thank You...

Hi
There are few important thing you need to test as operating system is not getting installed.
1) Once unit is powered on keep tapping the F10 or F2 key and run the Hard Drive & Memory test check if any part fails you need to replace the part.
2) Incase both the test passes you can call HP technical support and order for Recovery disc or click on the link given below to order the disc yourself.
Order Recovery Discs for Windows 7, Vista, or XP
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

How can I install new windows on NB200-10z without a CD drive?

Hi,
I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
I would like to do a recovery, but it also doesnt work.
I know there is a shortcut like press the 0 button when the laptop is starting up.
With this shortcut you can start the recovery to reset the software.
But when I press the 0 button it gives me an error.
So I think the recovery drive/partition is lost.
How can I install new windows on this minilaptop without a CD drive?

I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
+Message was edited: link has been removed+

Cannot install new Lightroom. Keep getting error code 58

Cannot install new lightroom CC. Keep getting message of error code 58.

It's usually a better bet with a 2330, but I think we'd better check for disk/file damage on your C drive.
The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Just downloaded Firefox 6.0 and have restarted 4 plus times, but it continues to hang while launching. I cannot open new windows, change any settings, or do anything but Force Quit. I'm on Mac OSX 10.5.8. How do I get past this hang?

Just downloaded Firefox 6.0 and have restarted 4 plus times, but it continues to hang while launching. I cannot open new windows, change any settings, or do anything but Force Quit. I'm on Mac OSX 10.5.8. How do I get past this hang?

Long story short: Simply get CC for teams. At 500 bucks a year it's a steal and those 5 licenses in the base package (or was it 10 even?) cover all your computers, at least the 3 ones you mentioned. For system requirements refer to the individual product pages.
Mylenium

HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

Hi,
Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
the Problem report.
When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
"native" windows drivers. Now, every major PC company has there own version
Thus the problem report.
There is rather involved and lengthy procedure to check and install the correct Bluetooth drivers
in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
Here is what I propose;
The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
try apologizing to it and that you'll never never do it again, what ever it takes!
Make the best investment you can make for your Blackberry, buy a media card.
All the memory in the BB is dynamic, this facilitates the functions of the phone.
By storing media in that memory, you effect are wasting X amount for file storage.
Store all media and files on the media card, and you will have a smooth running device.
They run about $25.00usd, they are easy to install, and they also make moving your
media a snap. You will need the USB adapter that came with it, but you can get that at
your local carrier store.
So if you agree with this I need some info.
On the Blackberry go to the options icon,click then scroll up to ABOUT.
I need your software version number, it's listed in this format: 4.x.x.xxx.
Send it back to me and I can tell you what size card you can get.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Upgrade / install new windows

is there anyway i can install new windows or upgrade windows on my palm treo 750 through my computer and data cable..
Post relates to: Treo 750 (AT&T)

http://www.palm.com/us/support/downloads/treo750update/att.html
From the above link:
"As of November 1, 2008, the promotional update to Windows Mobile 6 for AT&T Treo 750 devices is no longer available. The update has been available since December 4, 2007 when customers were first advised to take advantage of the download.The update was optional; Treo 750 devices running Windows Mobile 5 will continue to work and function as before. Treo 750 devices began shipping with Windows Mobile 6 pre-installed after November 30, 2007."
Post relates to: Centro (Sprint)

Cannot install new version of itunes, cannot remove old version

cannot install new version of itunes, cannot remove old version

http://support.apple.com/kb/ht1925
See this for your query.

Cannot install new itunes

I cannot install new itunes, requires mac os x 10.6.8 and I do not know if this Mac OS version can run on my MacBook (2008 model)

Lion requires
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
If not listed in the on-line store you will have to call Apple to order it

SCCM2012R2-WSUS-"Install New Windows Update Software" message

I have set up WSUS. I have installed SUP on SCCM. I have created two collections; Available and Required, and split my computers between them
I have deployed various Software Update groups in batches of less-than-a-thousand to get me to the point where i can use ADRs from now on. I have created an ADR for October's updates to deploy to "Required". It downloads (though only directly from
MS - cant get it to just use the WSUS folder but thats another issue) and from what i can see it deploys fine
I run Windows Update on my Test PC and Server and it says it's up to date. Great. Just to test though, i click on "Check for updates from Windows Update" and they both come back with "Install new Windows UPdate Software - To check for updates,
you must first install an update for Windows Update. Your automatic settings will not change"
So i install that update (direct from Microsoft) and Windows update closes and re-opens as it says it will.
I run another check for updates and they both say "Up to date". So i check from Windows update again since i have now installed this new update software that i would have thought my SUP WSUS would have installed)
Now from Microsoft's site they both have 45 important updates nad 35 optional updates available. What?? So i check these updates in the list and they are all in the October package. Why arent they available on my internal SUP/WSUS but they are available
from MS Update?

Hi,
That is the way it works, if you have selected to have the Software updates deployments visible they are visible in Software Center instead and there you can install the updates that is needed on a computer/server if you have deployed the updates to that
server as available first.
Yes it is possible to do, deploy all updates to a collection, create a query for that collection so that all members in that OU is automatically made members in the Collection.
then when a client is added to that OU the collection will be updated with that client as a member and the client will scan for updates and install the updates deployed to that Collection. It doesn't really matter in that case that the SCCM client does the
installation of the updates and not the WindowsUpdateAgent.
I hope that answered your question.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

After upgrading iphone 5 to iOS 7, I cannot install new apps

After upgrading iphone 5 to iOS 7, I cannot install new apps. I get the message that I must first read and agree to iTunes terms and conditions. I read the terms and conditions online, but I don't see a way to agree when I install or re-install iTunes 11.1. I can update existing apps ok, though.
Anyone have this problem and find solution?

Delete & ReInstall the App Store...

Cannot install new itunes update windows 7

I get the following error message when I try to update to the new iTunes version:
"The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below.
Use source:
C:\Users\****\App Data\Local\Apple\Apple Software Update\iTunes64.msi"
****=My name
I am trying to install the latest version and have been receiving the same error message for about a month. After that message this one pops up:
"The path C:\Users\****\App Data\Local\Apple\Apple Software Update\iTunes64.msi" cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes64.msi' in a folder from which you can install the product iTunes"
And then this one:
"Errors occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually."
When I use Download Only and try to install manually as suggested, I get this message:
"The older version of iTunes cannot be removed. Contact your technical support group."
Can anyone please help me resolve this?
Thank you!

"The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below.
Use source:
C:\Users\****\App Data\Local\Apple\Apple Software Update\iTunes64.msi"
****=My name
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

PC World say you cannot transfer bookmarks from an old Vista laptop to a new Windows 8.1 system.

I bought a new HP Pavilion laptop from PC World and paid to have the files tranferred from my old laptop to the new one. When I couldn't find my bookmarks they then told me they could not be transferred. Is this correct or can I still retrieve them? I still have the old laptop. I used Firefox on the old laptop as on the new with the same e-mail address and password.

Every web browser that I have ever seen has had a method for exporting bookmarks in the standard bookmarks.html format.
In Firefox - {Ctrl + Shft + B} to open the Library > Import & Backup -> Export Bookmarks to HTML
or the Backup option

CANNOT OPEN NEW WINDOW or ADD-ONS

I downloaded latest version of Firefox - now I have multiple issues.
I cannot open a new window, I cannot print e-mail body messages, altho I can print the page, I cannot open add-on in tools, but this is this is intermittent, I installed latest Java and sometimes add-ons open and sometimes not, there is no pattern, I also have some problems opening some windows in other applications.
OS is XP- never had problem before

The Firefox 3.6.28 version that you currently run is no longer supported with security updates.
You can update Firefox to the latest version via "Help > About Firefox" or "Help > Check for Updates" or download and install the latest Firefox version.
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 12.0.x: http://www.mozilla.org/en-US/firefox/all.html
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Cannot install new apps to iPad

Hi,
My iTunes doesn't install new apps and few installed apps doesn't show on iPad. "Automatic Install new apps" and "Install" options are grayed out. There is no page 3 on my iPad but my iTunes shows. Please see the attached image and please help!

Both my macbook and windows laptop were authorized to the iPad and it was working fine. But now I get same problem on both the computers. Below are the steps i've already tried:
1. Did all updates.
2. De-authorized all computers and authorized only macbook.
2. Reset iPad through itunes (summary page).
3. Reset using iPad option. General ->Settings -> Reset -> Reset all settings and Reset home screen layout.
4. Reset by holding power & home button.
Even after doing all these reset the issue is same as mentioned above. Any idea?
Raja

Cannot get rid of old itunes and cannot install new one!

I just got a new nano today, so i tried to update my old itunes account to the version 7.02. For some odd reason,however, my old version of itunes that was compatible with the mini cannot be uninstalled. Therefore, I cannot install the new version of itunes. What do I do???
Windows XP

For some odd reason,however, my old version of itunes that was compatible with the mini cannot be uninstalled.
do you get an error message if you try to uninstall itunes from Add/Remove programs? if so, what does it say? (include error message numbers if you're getting any.)

HP Envy 6 - 1003tx Laptop - Cannot install New Window

Similar Messages

Maybe you are looking for