HP Envy 700-056 needs s-video output

problem: s-video output needed on this HP Envy 700-056 machine
any suggestions? e.g. a PCI card with s-video output?
This question was solved.
View Solution.

Hi,
Are you looking to capture input video or just output?
S-Video graphics cards are pretty much out of manufacture. Look for a NVIDIA GT 9500 if you want output. MS Windows 8 does show compatibility with the NVIDIA GT 9500. There are several GT 9500 models listed as compatible.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Where are the headphone jacks on an Envy 700-056

where are the headphone jacks on an Envy 700-056?
This question was solved.
View Solution.

Microphone, headphone, and USB ports can be found on top of the computer facing to the rear.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP Envy HDMI conversion to standard video output.

I've recently purchased a new HP Envy notebook. I didn't even think to examine the available ports, and was a little surprised to discover that it only had an HDMI port. I made this discovery as I was setting up in a conference room at work to do a presentation and could not connect to the standard video cable that is used in all company conference rooms. I had to hastily copy my presentation to a thumb drive and borrow someone else's computer.
I'd like to be better prepared in the future, so I'm hoping that there is a way to convert the HDMI output to standard video. Is there such a thing?
~Patrick Hagerty
System Quality Engineer
Astronautics Corporation of America

Perhaps a clarification on terms. "Standard video" is not a real clear explanation of the type of connection being described. Take a look at the diagrams on THIS page to define the type of connection being used and then we can go from there. While the page linked does show converters for the answer to the question, it is not meant as a recommendation.
I suspect the one you are really wanting is the "HDMI to VGA" but come back with a better explanation, if needing further help.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Monitor with HP Envy 700-056 going black UPDATE

After doing some extensive searching, it has become clear that if you are a gamer or do any high end graphics that a DVI to HDMI is not going to work well. While working with graphic intensive programs, the screen resolution my change and it is important to have a dedicated graphics card, such as NVIDIA, that has the ability to do an HDMI to HDMI connection.
I did exactly this by using a new Laptop and using the HDMI to HDMI connector to the VIZIO. This worked and the VIZIO never went black. The laptop has both the Intel and NVIDIA Graphics cards.
So, after spending a good chunk of change for the new HP Desktop, I am now forced to either go with a new desktop that has the HDMI port or buy a dedicated graphics card like NVIDIA. Again, HP failed to make this very clear and are obviously aware of the issue as others have posted blogs regarding this very same problem.
As to why a new HP desktop does not have the option of an HDMI on the tower is beyond me. With more and more people opting out for Smart TV's as their monitor it would make sense to have an HDMI on the tower and not just the DVI to HDMI connection.
I would highly recommend that anyone that is a gamer or uses programs that are graphic intensive to make sure that you have a dedicated graphics card on your desktop.......the DVI to HDMI will not work...that has become painfully obvious.

Hi,
Try a DVI-D dual link to HDMI cable. You will have to use a separate sound cable. Ultra high resolutions (4k) may be a problem in which case you might need a discrete graphics card.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How to disable bios password for desktop hp envy 700 056

I tried to remove the battery out of the motherboard and wait for 1 minutes and more, and then put in back the motherboard, but the password is still there. I don't know how to remove or disable the bios password. I need help, please.
Thank you very much.

Hi,
Review this posted HP information.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Satellite P300-13J - S-Video output shows no picture

Hi,
I need a little help here.
I have P300D-13J and I bought it with OS Vista HP 32-bit. I have tested S-Video output few times after time I bought my computer and it worked fine,no problems.
But,after a few months I needed S-Video output and I connected cable like any other time I did that(same cable,same TV),and it didn't worked!
I thought it was some software problem,and in that time my copy of Windows 7 HP came. I've installed Windows 7 HP 32-bit on my computer and everything is working super,but I still have the same problem with S-Video output. I need to say that with instalation of W7, I installed all newest drivers from Toshiba web page.
When I try to move screen on TV, I use FN+F5,and it has a button called TV. But if i chose TV,my FN shortcut key blocks and nothing happens.
When I go to Display Settings and connect TV on S-Video,I have second monitor (No.2) and it is called Non PnP Generic Monitor or something like that. I can not change any settings on that monitor,not even a resolution.
So,does anyone has this kind of problems or solution for this?

Hey Stevan,
I had the same issue that I couldnt see a picture on my external monitor that was connected via S-Video cable. The solution for this problem was very easy: I had to change the TV-standard from NTSC to PAL!
Of course its depending on your country where you life but you can find this option in display driver options.
Check this!!!

Low Memory when rendering a video file (Win 8.1; HP Envy 700-230qe)

Rendering a 4-minute video (with several video tracks) using Sony Vegas Pro13, keeps stopping around 70-80% of completion --- saying that there's low memory.
How could that happen on a HP Envy 700-230qe with 32GB DDR3 memory?
I look at the Task Manager: the "Commited" memory keeps increasing during the rendering until it hits the full number (36 GB in my case) and then the memory is depleted, which stops the render.
(No changes to the system except addition of an SSD drive as main drive, and a Blu-ray burner)
This question was solved.
View Solution.

Hello @Mango7
I understand that you are having issues with rendering a video using Sony Vegas Pro 13. I suggest you look to the Vegas Pro - Video as it would appear there are settings within the software that should help you. If you cannot find a post that matches what you are trying to do or the issue you are facing I suggest you post there as it would appear that their are numerous community members there that are willing to help.
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

What do you need to get video output to external monitor

Hello,
I'm fairly new to Color and have read a few posts that color can't be viewed by firewire to an external monitor. Basically what I have right now for external viewing in FCP is a JVC SR-VS30 Mini DV NTSC deck with firewire connected to my computer. From the deck it goes to a small TV set and a Sony Trinitron PVM color video monitor. What do I need extra to be able to see my color correction in Color on an external monitor. BTW in Color currently the Video Output tab in Setup>User Prefs is grayed out showing Disabled. I suppose that when I get whatever I need to see Color on an external monitor that this tab would NOT be grayed out or would I have to set some other settings.
Thanks.

Well, you can waste a lot of time and money trying to get your old iron up to speed but the sad fact is, even though it may work with Color, it will most likely end in a less than satisfactory experience all around. You need to determine if your G5 has PCI, PCI-x or PCIe slots and then purchase the appropriate cards.
However, Final Cut Studio 2 is optimized for the Intel processors. You will see users here and there using the newest models G5 with great success but quite honestly, you need a Mac Pro.
Or just purchase the Aja IO/HD which is a firewire 800 interface and the only firewire device that will preview externally Color.

Do you need to have the retina display option to have 3 different video outputs?

Do you need to have the retina display option to have 3 different video outputs?

http://en.wikipedia.org/wiki/Video_card
http://support.apple.com/kb/ht5842 Maverick requirements.

No audio output device is installed (HP ENVY 700)

I have no sound at all on my pc , either with my headphones or with the basic sound of the pc . I can not access the volume mixer. I have verified that my drivers are up to date . In recording device there is nothing, no audio device is installed in recording and sound.
Exploitation systeme : Windows 8.1 64 bits
Model : HP Envy 700-339

Hello @Matsau14,
I understand that your HP ENVY 700-339 Desktop PC has no audio and no audio devices installed even with your drivers up to date. I suggest that you try a back and factory recovery of your computer to ensure that you do not have a hardware issue.
To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 8), which will ensure your personal files are up to date.
***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 8), which will you through recovering your computer back to factory settings.
*** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
If the above steps did not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Help installing a second hard drive in HP ENVY 700-230qe CTO Desktop

I am trying to install a Western Digital 1.5 TB (model # WD15EARSSP) internal hard drive to my HP ENVY 700-230qe CTO Desktop PC. Would you please provide me the instruction menu and procedure for the second HD installation? What kind cable and other supplies do I need to connect the new HD to my PC? SATA cables: Straight–Straight, Straight–left angle, Straight-right angle… etc.
This question was solved.
View Solution.

Bling888, welcome to the forum.
Here is a guide that should help you. Be certain to watch the video. You will need SATA III cables; power and data. Although, the SATA 1.0 cables will work fine if you don't have the others. I have found that the straight cables have always worked for me.
Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

Vga or dvi to video output to NTSC TV viewing

GEAR: I have a G4 dual 1.25 (silver double doors) with an ADC and DVI output in the back.
OBJECTIVE: I need to go from that to an NTSC TV so I can see what my edits look like.
NOT SURE: I have seen the Apple adapter (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/7200505/wo/0K4TK pkMz7f922WszZYxFQMUy31/1.0.19.1.0.8.25.7.11.2.3) but it says it is for the MAC mini and the G5 only... does that mean it won't work for me?
OPTION B: Is getting a video card with an RCA or S-video output a better idea? If so which one? I am using both the ADC and DVI ports for two monitors, but would nuke one if necessary because I have to get this TV viewing capability up and running.
OPTION C for CANOPUS: I have also thought about the Canopus ADVC 100 or 300 so I can capture video from sources other than my DV Sony DSR-30. Right now, I have to record everything (everything that isn't DV) to DV on the DSR-30 before turning around to send it via firewire for capturing in FCP. Would the Caopus ADVC 100 or 300 also solve the TV viewing problem as well?
THANKS: in advance

Firewire to a DV/analog converter to your NTSC monitor. The only way for DV.
the DV/Analog converter can be either a dedicated converter (eg Canopus), a DV VTR deck (eg Sony DSR-11) or a camcorder.
the other options are not what you need.
cherios,
∏

My new (2 weeks old) Macbook Pro, wont send video output signal to beamer... What can I do? I have the adapter to vga but it does not work...

Hi, I have a new MacBook Pro and I dont get video output to a beamer although I have the regular
Mini DisplayPort to VGA Adapter and it works fine with my older MacBook...
Thanks a lot for your tips...

That should work. When you first hook it up it will probably have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In SystemPreferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.
If you also want audio you'll need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

HP Envy 700-030qe Windows 7 64 bit Drivers

Hi,
I purchased a HP Envy 700-030qe desktop
The computer came with Windows 8 preinstalled.
I'd like to downgrade it to Windows 7 64 bit, however HP website only has Windows 8 64 bit drivers available for download.
I tried it but it doens't run on Windows 7 64 bit.
I was only able to find Windows 7 64 bit drivers for Network Card and ATI.
I still need the rest in Windows 7 64 bit drivers for my HP Envy 700-059CB. Can someone help?
»HP ENVY 700-030qe CTO Desktop PC
Serial Number: [Personal Information Removed]
Product Number: D6M08AAR
Audio driver
bluetooth controller
pci simple communication controller
sm bus controller

Hi:
See if this chipset driver installs the smbus controller.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-128206-1&cc=us&dlc=en&lc=en...
See if this driver installs the pci simple communication controller.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-128208-1&cc=us&dlc=en&lc=en...
I can't find a W7 audio driver for your model. See if this one works by chance...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-128199-1&cc=us&dlc=en&lc=en...
I'll take a guess on the bluetooth driver if your PC has a Broadcom wireless card...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-128908-1&cc=us&dlc=en&lc=en...

HP Envy 700-056 needs s-video output

Similar Messages

Maybe you are looking for