HP Envy 700-214 desktop drivers not ready for Windows 10 Prime Time

Really disappointed in HP for not being ready for W10 rollout. I upgraded my HP Envy desktop PC 700-214 and after the upgrade, I could not connect to the internet. Didn't recognize the networking hardware. Went to HP Support (on different computer) and found out here aren't W10 drivers yet for this machine. Very Poor.My wife has a Dell laptop and we have another older Dell that upgraded no problem. Why because Dell is on top of their $__t when it comes to this stuff.Won't by HP again.

MrDimplz wrote:
Really disappointed in HP for not being ready for W10 rollout. I upgraded my HP Envy desktop PC 700-214 and after the upgrade, I could not connect to the internet. Didn't recognize the networking hardware. Went to HP Support (on different computer) and found out here aren't W10 drivers yet for this machine. Very Poor.My wife has a Dell laptop and we have another older Dell that upgraded no problem. Why because Dell is on top of their $__t when it comes to this stuff.Won't by HP again.Did you not try to reinstall the last support Drivers into Windows 10 to see if it works? Also with the lastest Windows HP will probably not support redoing drivers for older system as that will be cost prohibited to do. And it will be up to the Endusers to find the right drivers and software that matches their system to work with Windows 10 assuming they work with Windows 10. As to Dell that is something only Dell can answer that question and since we don't know if this is Dell Consumer or Business product since this falls outside of HP forums to discuss. You can't expect to have drivers if your system is too old to support Windows 10.

Similar Messages

Drivers Not available for windows 7 64 bits

HP Pavilion G6-2302ax Drivers not available
1. Graphics
PCI\VEN_1002&DEV_6840&SUBSYS_184A103C&REV_00
PCI\VEN_1002&DEV_6840&SUBSYS_184A103C
PCI\VEN_1002&DEV_6840&CC_030000
PCI\VEN_1002&DEV_6840&CC_0300
2. Bluetooth Controller
PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C&REV_00
PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C
PCI\VEN_1814&DEV_3298&CC_0D1100
PCI\VEN_1814&DEV_3298&CC_0D11
3. Ethernet Controller
PCI\VEN_10EC&DEV_8136&SUBSYS_184AEC103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_184AEC103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
4. Network Controller
PCI\VEN_1814&DEV_3290&SUBSYS_18EC103C&REV_00
PCI\VEN_1814&DEV_3290&SUBSYS_18EC103C
PCI\VEN_1814&DEV_3290&CC_028000
PCI\VEN_1814&DEV_3290&CC_0280
5. SM Bus Controller
PCI\VEN_1022&DEV_780B&SUBSYS_184A103C&REV_14
PCI\VEN_1022&DEV_780B&SUBSYS_184A103C
PCI\VEN_1022&DEV_780B&CC_0C0500
PCI\VEN_1022&DEV_780B&CC_0C05
6. UNIVERSAL Serial Bus (USB) Controller
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C&REV_03
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C
PCI\VEN_1022&DEV_7812&CC_0C0330
PCI\VEN_1022&DEV_7812&CC_0C03
7.
UNIVERSAL Serial Bus (USB) Controller
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C&REV_03
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C
PCI\VEN_1022&DEV_7812&CC_0C0330
PCI\VEN_1022&DEV_7812&CC_0C03
Need to install these drivers for windows 7 64 bit
This question was solved.
View Solution.

Hi:
First download and install the amd chipset drivers and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Graphics:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103954-1&cc=us&dlc=en&lc=en...
Audio:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103764-1&cc=us&dlc=en&lc=en...
Bluetooth Controller:
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_113004_1&swEnvOid=405...
Network Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111781-1&cc=us&dlc=en&lc=en...
Ethernet Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103913-1&cc=us&dlc=en&lc=en...

Order not ready for pick up second time

yesterday i bought a macbook for store pick up because i need it for travel and work. 3 hours went by and i never got the prduct released because the bridge decided to sit on it even though customer service said all was clear. i had to cancel order. today i gave best buy a second chance and its been 3 hours and i still have been heald up again. this is really making me never want to buy from best buy again nor recomend it.

Hi there Ebiasaf1983,
When making a purchase for travel and work, it can be a bit nerve racking to ensure you get it in time, especially if you are leaving soon for your travels! Generally speaking, our Store Pickup option is the perfect option in such a situation as you can place the order and have it ready for you when you get to the store.
I'm sorry to hear that your MacBook order may have been taking longer than you anticipated to process so that our store may fulfill it. It is discouraging to hear that this led you to cancel your order, and that you encountered a similar experience when you decided to try replacing the order. Using the email address you registered with the forum, I was able to see that you were able to pickup your order last night. If you should need any further assistance, please let us know!
Regards,

HP drivers not working for Windows 8.1

Hi,
I've been given this laptop and it came pre-installed with Windows 8, touch screen and every driver works fine on Windows 8 till I've upgraded it to Windows 8.1, touch screen no longer works installed the latest driver from the HP website and the own built in HP support assistant and verified it works for 8.1 and it still does not work. Any help would be much appreciated.
Regards.

Hi there @DuskHunter
Welcome to the HP Support Forums!
I understand that you updated to windows 8.1 , and now some devices are not working correctly. You did not specify the exact product you have , but I did find the support page for the closely related 14-n033tx, so you can give the drivers there a try.
HP Pavilion TouchSmart 14-n033tx Ultrabook Drivers
If not, then please post the full product number for your notebook. See the following, if you need help in finding that.
How Do I Find My Model Number or Product Number?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HP Envy 700-214 Fails to install windows 10

Earlier this Year, I purchased an HP Envy 700-214 PC 64 bit, with Windows 8.1 that also provided a recovery partition. I have tried to upgrade to Windows 10, from the Windows Upgrade process, which failed 3 times. I then used the Media Creation Tool to download the 64bit iso from Microsoft, when I then burned to a DVD as an image. From my running 8.1, I accessed the DVD drive and ran the setup.exe. It ran through the who initial process of downloading updates and checking the PC for problems and space, It then gave me the options to upgrade and save my personal data. I then clicked on Install, which ran until about 25% completed. I then received a message that the install failed, without a hint of why it failed. I am just about ready to give up and stick with 8.1, as I have never seen such a mis-managed software process as this upgrade in my entire life.....

Hello, Have you used any third party partitioning/cloning software to change partitions sizes or installed an SSD and used partitioning software to clone the OEM factory image to the SSD? The Win 10 upgrade may fail if this is true. On another note the following article by Ed Bott may provide a solution. We know you must upgrade first to tie your device to an activation code so you can install Win 10 on the device again. Ed Bott provides a method for installing Win 10 cleanly that also activates during the installation process. Note, your current Win 8.1 install must be properly activated in order for Win 10 to activate properly. Try setting UEFI (BIOS) settings to defaults before attempting the clean install procedure described by Ed Bott in the above article. Have a recovery option available if this fails. This method is going to require installation of all software you have installed now on Win 8.1. You will be nuking Win 8.1 and starting fresh with Win 10. If it fails you will have to reimage Win 8.1 using a Microsoft Recovery Drive and a good system image stored on external backup drive, third party backup software, or use HP recovery discs to go back to the factory image. Backup the SWSETUP folder on current Win 8.1 installation to use to install HP software on Win 10. You also have Win 10 drivers at your PC's software and driver download site available if you have any driver issues after the Win 10 upgrade completes. Lastly, are you using a wireless keyboard or mouse? If so, try the upgrade or the clean install method (per Ed Bott) using wired peripherals. I have not seen any tips on this but it might help by limiting complexity. Did you run the compatibility checker tool included in the" Get Windows"notification program located near the system clock? Tom

Where are the front USB ports on the HP Envy 700-210 Desktop?

I bought the Envy 700-210 desktop because it has so many USB ports. However, I can only find 8 - 2 on top and 6 in the back. According to the specifications, there are supposed to be some in the front. Do I have to take something apart to find them?
Thanks.
This question was solved.
View Solution.

VJR-Savannah, welcome to the forum.
Here is the Product Specifications page for the computer. If you look at the picture of the computer in the link, I believe that the front cover below the Red band slides down to expose the USB ports. This is how it works on my Envy 810-135qe.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Very poor sound quality on bluetooth headphones through HP Envy 700-074 desktop

I recently purchased a pair of Bose AE2W wireless bluetooth headphones to use with my HP Envy 700-074 desktop computer. After successfully pairing the headphones the sound quality is extremely poor. I know the headphones are not the pronblem since they sound beautiful when paired with my iPhone or iPad.
I have tried updating the driver, but I have the most current version installed according to the computer. Adjustment of the Beats Audio controls or any other sound controls does not help.
SKU:H5Q09AA#ABA
CK SN: {Private Information Removed}
704219-001MX
WO:000037025247
Any help or suggestion much appreciated. Thanks

Updated OS to Windows 8.1 and now I have ABSOLUTELY NO SOUND on any bluetooth audio devices. From bad to worse.

Linux is not ready for the desktop - Mandriva devs

I just read this in the latest DistroWatch Weekly:
You wouldn't expect something like this to happen at any time, let alone on the eve of Mandriva Linux 2007 release. Last week, two Mandriva developers went on record saying that "Linux is not ready for the desktop". In a web log post entitled Why I'll never use Linux for my main desktop, Vincent Danen concluded: "This kind of thing is precisely why, for me, Linux belongs on the server. Now if those kernel-developing idiots would get their act together and give us a 2.6 kernel that was a) stable and b) supported for more than a week, then I'd really be pleased." Another Mandriva developer, Fabrice Facorat, agreed. In a post called Linux ready for Desktop? Of course not!, he had this to say: "For me when you have control over the environment and the hardware, Linux is ready: think servers, workstations, thin clients, kiosks. However when you have no control on the hardware, Linux is not ready because it somewhat lacks flexibility."
There you have it, right from the horse's mouth! From two guys who have been working for a Linux company, developing a popular desktop Linux distribution, for years! Yes, that's right, Mandriva Linux is not ready for your desktop! Don't waste your money buying it!
One really has to wonder about the future of a company which happily asks Gaël Duval to leave, yet is quite pleased to keep developers who publicly hint that they consider Linus Torvalds, Alan Cox and other kernel developers "idiots"! A perfect pre-release PR, non?
No comments... I just cannot find any words. :shock: :?

ughhhh. Mandrake have always sucked at marketing, they do themselves no favours. IMHO, they're becoming more and more irrelevant with each release. Once upon a time I might have reccomended mandrake to a newbie, but certainly not now. They've got great assets and a good base. The *potential* to become a good distro. But each release, stupid bugs make it through, and the improvements seem negligable.
Once of their better features is their huge repository of packages -- which is horrendously poorly advertised. You'll find nowhere in the GUI's or desktop a place to access their 'contrib' repo which is the equivalent of our extra, and contains a huge amount of packages. Also an important point for mandriva has been mandrakeusers.org/mandrivausers.org, which has been a huge community offering great support for newbies to mandrake, rather than directing them into the expensive mess that is known as the mandriva club. Mandriva have totally ignored this resource, and have made no attempt to support this board, upon which you'll find, I have quite a reasonable post count from back in my early days of Linux (mandriva 8.2 was first distro), and continuing on to now. It also exemplifies their (lack of) decent customer support.
The distro has had countless irritating bugs which pervaded through releases, and all sorts of utterly stupid ones that should never have made it through the testing process. They do little to help themselves with this. I've reported countless bugs, and all of them have been ignored for months. On their last release, they included the old rt2500 module, which at the time, hard locked SMP machines, and made my mandriva unbootable as it was loaded on boot. I filed a bug, marked it as high priority and it was utterly ignored for more than 6 months, so much so I had forgotten about it. Other bugs and emails have suffered a similar fate.
It's GUI tools, have become a complete mess, for example wireless, in 2006 release, was absolutely horrendous to configure, and had no support for WPA -- wpa_supplicant wasnt even on the CD's so people could configure it manually.
It's good to see they're finally ditching their old desktop theme, which they dragged on for far too long. It's always been absolutely hideous.
Their business model emphasises the 'club' far too much, making it difficult to even find a download on their site for the standard version, which has "Free" tacked all over it, as if to try and make you feel like a cheapskate. Doesnt help how they change their release cycle frequently either.
The stupidity of Mandriva just confounds me. PR like this does nothing to help them. They criticise the developers for not providing a 2.6 kernel that is stable. Maybe mandriva should look in their own backyard, and offer a distro that's remotely stable. Last time I used it, it had a horrendously old udev, hotplug, and a very slow hardware detection system. It still used bootsplash, which has been unmaintained for over two years, and included supermount, which Con Kolivas has disowned and again, has abandoned for years. They're hardly doing themselves favours patching their kernels with this out of date crap. Nor do they update them, I dont see mandriva offering updates to newer ones, which would no doubt fix many of the reported issues.
Alternatively they could do what other distros do and pitch in and help. Many of the kernel developers are also employees of other vendors, or have an important part in other distros, such as Daniel Drake and Robert Love. It'd be great for mandrake if they employed a kernel developer, because it's clear THEY are the ones who are the idiots.
I have no idea how they made it out of their bankrupcy, with the lacklustre state of their miserable distro, I think their days are numbered, unless they do something to change around their image and fix their product.
ok, im done.
James

Firefox beta 35 not ready for prime time.

I have spent the entire weekend trying to get the Firefox beta 35 to work. What I have found is that *all* extensions fail to work with the exception of Places Maintenance. I can not download any extension Firefox is so famous for. The error is something like "cannot install 'plugin-name' in it's current state." Enabling any extension require a FF restart, even Places Maintenance. Trying to remove an extension fails and must be done manually.
I am on Windows 7 Premium desktop Firefox, 32 bit. I "committed" myself to FF 35 last night (which meant clearing history and cache on exit because the extension "Expire History by Days" was no longer working), when I discovered that 35 was not playing nice with some sites using Flash. It was a capricious thing. Many sites worked as normal but some would not render at all. Examples:
http://www.wunderground.com/US/WI/La_Crosse.html
http://www.weather.com/weather/5day/l/Hustler+WI+54637:4:US
First time I have has a problem with a Firefox beta, but it is definitely not ready for prime time. I realize FF is attempting to get away from what we are calling "Proprietary add-ons" but FF 35 in its present state will just fill the Moz Support forums with millions of complaints (guess I am one of the first). I have at present 1 extension (the only one that works on 35), the above mentioned "Places Maintenance."
I thought you might like this report as "user input." God knows I have tried...I must have downloaded 35 at least a dozen times and then been forced back to 34.0.5. So I am back on 34.0.5
I have submitted a bug report here:
https://bugzilla.mozilla.org/show_bug.cgi?id=1108196
Let me know if anyone else is having these problems or anyone needs more information. I'd love to help fix this. I know some of you good support people have probably tried 35. Are you having the same difficulties?
Below is my (34.0.5 but the same as I had on 35 last night with the exception of "Version") trouble shooting information minus a million entries for my printer:
Application Basics
Name: Firefox
Version: 34.0.5
User Agent: Mozilla/5.0 (Windows NT 6.1; rv:34.0) Gecko/20100101 Firefox/34.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Places Maintenance
Version: 1.3
Enabled: false
ID: [email protected]
Graphics
Adapter Description: NVIDIA GeForce 9400 GT
Adapter Drivers: nvd3dum nvwgf2um,nvwgf2um
Adapter RAM: 1024
ClearType Parameters: Gamma: 2200 Pixel Structure: B ClearType Level: 50 Enhanced Contrast: 300
Device ID: 0x0641
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 12-19-2013
Driver Version: 9.18.13.3221
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Subsys ID: 304619da
Vendor ID: 0x10de
WebGL Renderer: Google Inc. -- ANGLE (NVIDIA GeForce 9400 GT Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.search.suggest.enabled: false
browser.search.useDBForOrder: true
browser.sessionstore.enabled: false
browser.sessionstore.max_tabs_undo: 0
browser.sessionstore.upgradeBackup.latestBuildID: 20141126041045
browser.startup.homepage: http://www.wcwcw.com/
browser.startup.homepage_override.buildID: 20141126041045
browser.startup.homepage_override.mstone: 34.0.5
browser.tabs.loadInBackground: false
browser.urlbar.autocomplete.enabled: false
dom.indexedDB.enabled: false
dom.mozApps.used: true
dom.w3c_touch_events.expose: false
extensions.lastAppVersion: 34.0.5
font.internaluseonly.changed: false
general.autoScroll: false
gfx.direct3d.last_used_feature_level_idx: 1
keyword.URL: https://www.google.com/search?q=
media.gmp-gmpopenh264.lastUpdate: 1413301734
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1417991594
network.cookie.cookieBehavior: 2
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1418059778
places.history.expiration.transient_current_max_pages: 80511
plugin.disable_full_page_plugin_for_types: application/vnd.fdf,application/vnd.adobe.xdp+xml,application/vnd.adobe.xfdf,application/pdf
plugin.importedState: true
plugin.state.np32dsw: 1
plugin.state.npdeployjava: 0
plugin.state.npgoogleupdate: 0
plugin.state.nppdf: 2
plugin.state.npwatweb: 2
privacy.clearOnShutdown.cookies: false
privacy.clearOnShutdown.formdata: false
privacy.clearOnShutdown.offlineApps: true
privacy.clearOnShutdown.sessions: false
privacy.cpd.cache: false
privacy.cpd.cookies: false
privacy.cpd.offlineApps: true
privacy.cpd.sessions: false
privacy.popups.showBrowserMessage: false
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.sanitizeOnShutdown: true
privacy.sanitize.timeSpan: 0
security.disable_button.openCertManager: false
security.disable_button.openDeviceManager: false
security.warn_viewing_mixed: false
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1415513129
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSMIME
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSSL
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSUTIL
Expected minimum version: 3.17.2
Version in use: 3.17.2
Experimental Features
---------------------

Just for the record I'm using Fx35b1 with lots of plug-ins and extensions with absolutely no problems now or for quite a long time.

V4.0 won't start. crashes each time. Had to go back to previous version. Version 4 is just not ready for general release, it is massively messed up. The online fixes here had no effect whatsoever. VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

BADI Error: Field GOITEM-ACCT is not ready for input ? HELP!

I get this error message when testing my BADI in the MIGO Transaction. The BADI is the MB_MIGO_BADI. It is from the Line_modify method. Here is the entrie message:
BAdI: Field GOITEM-ZZREG_ACCT is not ready for input. (Change is not copied over)
Message no. MIGO050
Diagnosis
The contents of field GOITEM-ZZREG_ACCT have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
The field is defined correctly in the screen as an input/output field - so it does not relate to that.
HELP!!!!!

Yes - I have reviewed all of the code and I never do any modify to the screen attributes of a field - although it sure acts like it. The screen lets me put in data and it stays there up until it finishes the method line_modify. The error is when i press return after i enter the field- it completes the BADI method and then goes to the main program and does field validation and always comes back with some internal table field called "work" with a value of 0 and it should be a value of 6.
Thanks!
Scott

"This drive is not ready for use; it's door may be open ..."

Hi.
I recently updated to itunes 7, and then had an issue with a corrupt file on the i-pod (which resulted in chkdsk hanging itself at 27%, always). So I restored the i-pod and that took care of that - chkdsk now says it's fine.
However - it is also empty. My machine and i-tunes recognize it fine upon start-up; however, a short while into a full synch to get my library back on the i-pod, I invariably get the following error message:
"The drive is not ready for use; it's door may be open. Please check drive \Device\Harddisk\DR 3 and make sure that a disk is inserted and that the drive door is closed." The message comes with the options "cancel, ignore and continue", yet the latter two don't make a difference, and even if I choose cancel, itunes keeps trying until it eventually crashes.
This always happens after itunes has synchronized about 1.13 GB (out of 18.55 available).
As far as I can tell, both my system and the iPod are up to date (itunes and windows update say so, anyway). E: is unequivocally and exclusively allocated to the i-pod; changing the settings from "optimize for quick removal" to "optimize for performance" has made no discernible difference.
Any ideas would be very much appreciated.
Thanks.
DELL Inspiron 4150 Windows XP

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

"The drive is not ready for use; its door may be open. Please check drive \

3G IPOD problems which are driving me mad and i can see others have had the same problem but i can't find any solution written down.
Basically my IPOD either freezes after a couple of songs or it downloads about 6Gb (of 40) and the freezes with the following message:
"The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
I've tried re-setting, installing etc but no luck. Any suggestions/solutions?
Laptop - Packard Bell Notebook Windows XP

Hmmmm. I'm not sure how to explain this.
You need to change the Drive Letter for your iPod.
You should be able to connect your iPod then open Windows Explorer and right click on your iPod(which seems to be Drive E:) and change it to a different letter (like H).
If you haven't enabled disk use for your iPod it probably won't appear in Windows Explorer.
To enable disk use: connect iPod, open iTunes. Open Preferences and select the iPod tab. Choose "enable disk use."
Once you've done all that, try resyncing.

HP Officejet Pro L7590 &/or HP Slimline computer NOT ready for market

I purchased the Officejet last August and used in through December with a Dell with no problems whatsoever. When I bought an HP Slimline with Vista 64 the printer started spitting out a dozen pages with a few lines of garbage characters for each document including the Test Page, and did not completely print the documents. I spoke with three technicians who were all given remote access. We each spent about 3 hours per session. They were unable to make ANY progress in solving the problem. HP provided a VISTA 64 installation disk. It should not have done so. HP has taken no responsibility for releasing a product to market that is not ready for use but will not accept it back and will not give credit for the expensive paper weight that it has become. Moral of story: stick with Dell, don't buy anything from HP.

Thanks for visiting the HP Consumer Support Forums.
This
forum is for suggestions directly related to the forums. If you'd like
to leave feedback regarding issues not directly related to the forums,
please follow this link:
http://welcome.hp.com/country/us/en/contact_us.html
This
is a user-to-user community, and not a venue to receive directly help
or feedback from HP. If you have any further questions or concerns,
please feel free to send me a Private Message.
Thanks!
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Migo: field not ready for input

hello ,
i am stuck with an issue , which is ---
I have to add two fields in migo tablecontrol with dyndr- 200, for overdelivery tolerance and under delivery tolerance.
I am able to add them with my custom fields (ZZUEBTO,ZZUNTTO). and now fields are their in table control .
But now the issue , when i am initializing values to these fields using badi MB_MIGO_BADI ,and method LINE_MODIFY,
its showing warning that --
BAdI: Field GOITEM-ZZUEBTO not ready to accept input (Change will not be adopted)
Message no. MIGO050
Diagnosis
The contents of field GOITEM-ZZUEBTO have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
if any one , please revert me back .
Thanx,
Jeetendra Chauhan
Edited by: jeet.chauhan on Jun 2, 2011 7:58 AM

Hi
If I understand you, you are modifing the standard dynpro SAPLMIGO 0200 (ie: the table control TV_GOITEM). I suggest you to avoid it and mantain these fields in a new tab with this BADI and methods PBO_DETAIL and PAI_DETAIL.
Regards
Eduardo

HP Envy 700-214 desktop drivers not ready for Windows 10 Prime Time

Similar Messages

Maybe you are looking for