HP Envy 7640 driver won't install on Yosemite Mac OS 10.10.1

I am running MAC OS 10.10.1 (newest Yosemite update). I have downloaded the newest drivers from the hp website. I am trying to install the drivers for my new printer for the first time and the drivers will not open, as they say they're not recognized.

Hi renee1958,
Will you please provide me with the exact error message you are receiving (or a screenshot)?
I'd also like to confirm that you are trying to download and install this file: HP-ENVY-7640-series_v12.39.0.dmg.
It sounds like you have already run ASU for the latest computer updates, but I recommend following the steps in this doc: Installing Your HP Printer Driver and Software for Mac OS X.
Let me know if that works. Thanks.
-- ReverseTalk
I work on behalf of HP.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if I solved your inquiry.

Similar Messages

New Intel video driver won't install

The new intel video driver won't install on my T410. Anyone else having the same problem? All I get is a Turbo Boost installation box. The intel video driver version doesn't update. I've tried manually installing via "update driver", but windows says that I already have the newest driver (even when i only have 8.15.10.2202).
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74433
Win 7 Pro x64
T410 2516-CTO

It could be a typo.
http://download.lenovo.com/lenovo/content/ddfm/MIGR-74582.html#video
that shows what you have to be the latest.
After looking at it again it is a typo. It shows .2202 until you bring it up, then it shows .2253. I will let the admins know, ty for pointing it out.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

New Mac Mini Server, two Hard drives, Can I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

New Mac Mini Server, has two Hard drives, could I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

I haven't purchased a Mac Mini at this time and I may not if I can't use it as a non server. I need to update my system I would be better off buying a new Mac with Snow Leopard the last app that will run Rosetta. The Mac Mini Server has a quad 2.0 processor and 4 GB RAM and two internal hard drives and should out perform my dual 1.25 G4. I can run PPC apps on my G4 but it is 8+ years old and seems to be getting noisy. I don't want to tie myself to another old machine. I want a machine that will work with Intel Apps I was hoping that the two hard drives would allow me to boot from the second with Snow Leopard and use Lion on the first drive to be able to keep up to date with all my other universal apps and Mac OS up grades. The application I use the most is my CanvasX app with drawing & vector effects, text & typography, sprite technology, painting, image editing, and multimedia tools are all in this one app but will not be updated to run Intel apps. I am frozen in time because my most valuable Application won't be updated and Apple has cut me off by not supporting PPC in Lion and onward; Apple used to backward support but I guess that they are no longer as user friendly and concerned with a happy user. I have always been a loyal Mac user and I will not migrate to Windows under any circumstance; I hate windows!
Thanks for your prompt response,
Dick Deaton

Flash won't install on yosemite 10.10.2 gets to 25%

flash won't install on yosemite 10.10.2 gets to 25%, then nothing .. infuriating

I had the same problem, but when I disabled my antivirus avast, I could install

The metal flap over the dvd drive won't close on my Mac Pro

The metal flap over the dvd drive won't close on my Mac Pro.Very annoying,dust will kill.
Any ideas?

Hi Toby,
See if one of these videos shows you how to get to it...
http://eshop.macsales.com/installvideos/macpro_2010_opt/
http://eshop.macsales.com/installvideos/macpro_2009_opt/

My new blank hard drive won't install OSX from the disk?

For some reason my Mac book pro won't install OS through the install cd or through the flash drives. It will load the disk but then freeze when I click install. It won't load through the USB either. I have done multiple diagnostics at the mac store and they tell me that my hd is bad. Twice the hd was fresh out of the box and installed that day. I spoke to a supervisor via phone when I called apple care and he told me that unless I have all apple parts in the computer they can't accurately diagnose the issue. It feels like they're trying to con me into paying double for a "apple hd". What can I do to get my computer working?

I would purchase an external USB enclosure for the HDD. With the HDD in the enclosure, install OSX and then mount in your MacBook. If you continue to have problems, it could be a faulty internal SATA cable.

Mavericks won't install on newest mac mini fusion drive

I have a mac mini, latest version. I have a fusion drive.
Mavericks won't install on that drive. I get this message:
This disk doesn't use the GUID Partition Table scheme. Use Disk Utility to change the partition scheme. Select the Disk, choose the
partition tab, select the volume Scheme and then click Options.
Well, I did that, up to "choose the partition tab." Then it says "you may only split this partition into two. To do this, click +."
I did that, and there were two partitions. the only option left is to select apply, which I didn't.
The "options" were still greyed out.
So now what?
Thanks for any input.

Lion creates a recovery area with a minimal version of OS X and it may be unable to do so due to use over the years, and possibly other resizing operations (Boot Camp). It could just need more space, if you only have less than 8gb free. Lion shuffles and merges the two systems when it upgrades. You can burn the image downloaded from App Store by finding the dmg file inside the "Install Mac OS X Lion.app" bundle, dragging it into disk utility, then burning from there.
Otherwise, you can appropriate a MBR/BIOS formatted 4GB thumbdrive, 8GB of either EFI or MBR/BIOS thumbdrive, flash storage device, or external hard drive, and format it, using the restore operation through disk utility to copy the contents of the installer disk to the media. Exposed via the alt key before the Apple logo, should show the bootable media, where you can format over the former installation.
As always, backup your files when upgrading. I recommend if your installion is over a year old to wipe and upgrade if you can't make otherwise the media bootable, using your 10.6 recovery dvd.
If you cannot find an external medium to backup your files before the upgrade, if you need to format via disk utility (Through 10.6 media), you can consider Dropbox as an option (2GB free account).
It's not uncommon for the partition to simply refuse operations, including upgrades and resizing.

Apple mobile device USB Driver won't install (Code 37) on my 7th Generation iPod Nano

As a result, iTunes won't detect my iPod. But the iPod will charge when I plug it in to my comp, and there is an iPod folder in "My Computer". But after installing iTunes, it no longer says “connected” on the iPod (even though it still charges it). And, in Device manager, there is a yellow exclamation mark that appears in the DVD/CD-ROM drive directly after installing iTunes – there is also a yellow mark next to “Apple mobile device USB Driver” when my iPod is plugged in. For both, it says “Code 37.” I know how to fix the DVD/CD-ROM drive problem (by deleting the filters) but the Apple driver still won't install after that. I've tried troubling shooting this. I uninstalled and reinstalled the drivers, but it hasn't made a difference. And I've uninstalled and reinstalled iTunes multiple times, too, and every time I reinstall iTunes the same thing happens: my iPod no longer says “connected on the screen,” and the DVD/CD-ROM drive gets code 37 again. Also, I tried different USB cables/ports.
Any help of suggestions would be greatly appreciated. And I think I've already read a lot of troubleshooting guides on this site, but haven't had any success so far.

Sorry, I'm confused. What do you mean by “leaving all other USB devices disconnected”? Does that include my mouse, keyboard, etc? And does that mean I uninstall those things in the device manager?

Optical drive won't install programs from CDs

I have a S300-EZ2501. I downgraded my installation from Vista Business to XP Pro.
My drive has stopped installing programs that come on CDs. I did not have this problem while loading all my software onto the laptop. Now, however, when I insert an installation CD into the drive, it attempts to read the CD, but cannot initialize the Autorun file, so nothing happens. I've tried running the install from the Run line, or by browsing to the file, but that does not work either. I also tried deleting the device from my system and reinstalling; that didn't work either.
Are there any registry settings for the optical drive that I can check? I want to make sure that the system is pointing to the correct location.
Thank you.
Barry L. Lippitt

I tried to restore to earlier settings, but that did not help.
If I try to doubleclick on the executable file on the CD, the hard drive light goes on, but not the external drive light.
I'm starting to think this is a WindowsXP problem and not a drive problem. I copied the contents of one of the program CDs to my hard drive, and tried installing from that directory. When I double-click on the Setup.exe file, there is sporadic hard drive flashing light, but nothing happens. The programs install from .exe files and not .msi files, so its not a Windows Installer problem. What other settings can I check that affect running setup programs on the laptop?
As I'm typing this, all of a sudden the executable program screen appeared on the laptop (after about 10 minutes). Maybe it will install, but that's a very long time before it happens.
Nothing more happened (10 more minutes). When I closed the screens fromy my toolbar, I received a popup telling me that I am ending the "nonresponsive program 32-bit Setup Launcher." I think there is a problem with this file; when I tried to install other programs (16-bit, from earlier versions) and had to close them down, I received messages that the 16-bit system was unstable.
Is there a way to repair these files on my laptop? What might have destabilized them?
As a reminder back to the beginning of this thread, my laptop came with Vista Business installed, but I downgraded from the restore CD to WinXP Pro.

New hard drive won't install

I am trying to install a harddrive into the second bay of my 2005 Power Mac G5.
The drive I'm installing is a Western Digital Caviar black 2TB. It is and SATA drive and the same one has installed successfully on my newer G5 tower.
I plug the drive in, start up the computer - and it doesn't show up. The computer can't find the drive, not even through the disc utility.
I know the bay works since it held a smaller, older drive before that also shows up if I put it back.
Is the drive too new or large for this older computer to recognize it? I'm definitely at my wits end.....

G5s will take up to 2.2 TB drives no problem, I think you need a Jumper on Pins 5&6 to slow it ti SATA 1 speeds.
http://www.fatwallet.com/static/attachments/12634_western_digital_sata_jumpers.j pg

G60-audio drives won't install

have tried to install drivers for audio on G60-519wm they won't install any help. running win 7 home premium 32 bit
3 gb ram

Hi Stu
The original recovery media can be ordered by authorized Toshiba service partner in your country. If you want to find out more contact them. Addresses you can find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
By usage of Microsoft full version installations CD you can download all necessary drivers, tools and utilities from Toshiba download site. There are no download limits and all stuff on download page is for everyone.
Toshiba policy is that you buy unit and OS with valid license. Toshiba dont force nobody to use just delivered OS. You can do what you want and install your favorite OS (if delivered with Home you can install Pro version). Because of that all drivers are on download page.

Device Drive won't install correctly after 10.5 Upgrade-HELP!!!

HELP!!! I can't connect my iphone 3gs or my ipad2 since the 10.5 upgrade. When I connect either of the devices my PC says the driver is being installed but then it fails. HELP HELP HELP HELP!!!

Hi Tom,
it's very well possible that something is wrong with the amount. I have 4 different DIMMs installed: 64, 128, 256 and 512MB. The one of 256 MB might be the problem, so I've decided to take it out and we'll see what happens.
Meanwhile, I have to explain that my G4 has to 2 HDs, the original HD w/ OS 9.2 and a second bigger one w/ OS 10.5 (which doesn't want to start up again).
With the original HD as startup disk, I can still boot in OS 9.2 and that gave me the opportunity to check on the memory. Well, what I found out is that the RAM-disk was turned OFF (for both HDs). At the same time I remember that in OS 10.3 I had a problem with time/date reset, something that always would occur after unplugging the power cable. I always assumed it was a dead battery but today I had the battery checked and it's still ok, so I figure it must be something else. Perhaps the RAM disc that is turned off? Shouldn't it be on?

T500 XP fresh install, wireless driver won't install, help!

Hello all,
Hi all, I need some help from the techies please!!
I have had a very nasty virus (Ramnit-G) rip through my T500 which has rendered it unusable and needing a full re-install.
Now I have a legit copy of XP SP1 which is tried and tested many times on my 6 other machines so all is good.
I downloaded the ThinkVantage system update thingy as mentioned in the 4th post on this thread and also my wireless interweb driver 6mcw24ww.exe from here.
XP install all done so first job to do is get some interweb, but alas, the driver stubbornly refuses to do anything because it would like a windows installer first . So off I toddle to microsoft site and download the win installer 3.1 and install that and the interweb driver starts to install..... only to get to the final hurdle and then fail with an error box which says nothing more than "2: 0 1:" in it with an exclamation mark icon.
Can anyone help with a way round this please?
Thanks!!

Is anyone alive on this forum??
I downloaded SP3 to a USB HDD and installed that onto the T500 and now have the internet working okay, but when I try to install the Think Vantage System Update it says that it couldn't find any supported .NET Framework. So I downloaded the latest .NET Framework 4 from microsoft site and installed that, rebooted, tried again and it still says it can't find any supported framework. Is version 4 not supported then?
Please someone reply. I can't believe NO-ONE on this forum doesn't know the answer to this !
Thanks.

Flash Drive won't install - Lack permissions

I am the administrator with admin permissions but Flash won't install.
I have uninstalled the old and cannot get the new installed.

Your operating system & version WINDOWS 7
Your web browser(s) & version IE 9
Your Flash Player version you having problems with 11.7
Explain your problem in details; don't use meaningless words like "can't", "cannot", "unable", "won't work"
ERROR SAYS SOMETHING LIKE: CANNOT INSTALL, "USER LACKS PERMISSIONS"
I AM A SMALL BUSINESS OWNER AND AM THE ONLY USER/ADMINISTRATOR FOR MY PC
If you get error messages, please quote them exactly, or provide a screenshot: http://forums.adobe.com/thread/1070933

2TB Western Digital Drive won't mount in my Mac Pro. Please Help

Hello, everyone. I have a Mac Pro (MacPro1,1) with an internal drive that won't mount. I bought it used last year with 12GB RAM and 1TB hard drive and SuperDrive. I have since upgraded storage with an internal 2TB drive from Seagate (no problem), and a 500GB drive (no problem) from Western Digital, and installed a second optical drive from an old Power Mac G5. I had an additional newer 2TB drive from WD that I bought as an external. I took it out of its case and put it in a carrier and then in Bay 4 of my Mac Pro. It's the only drive I've had problems with, and I don't know why. The drive is immediately rejected by OS X upon startup. The options include "Eject" and "Initialize..." but I've clicked initialize every time. Disk Utility opens and I can see the drive but for whatever reason, it will not mount. There is one partition on it, and I think when I bought it, I formatted it with GUID and Mac OS Extended (Journaled). I haven't used it as a Time Machine drive, but I've backed up some files on it. I've restarted several times, and I'm not sure if I can hear it spinning inside my computer.
Should I pull it out and see if the partition is still on the disk? Wha

When DU launches or launch it yourself, that is the most useless "eject, ignore" and there is no real initialize command anyway anymore.... Click on raw drive WDxxxx and goto Partition tab, change the number of partitions to anything (another silly item) so you can go to the Advanced Options finally
WD MyBook drives are often not standard SATA drives with power and data connectors.
Does it look like one?
It should be GUID but make sure, you can also tell from the status below.
Might even change it to something else, erase, then set it back to GUID.
Apply. And only then does it matter what user partitions you create.
Jump through hoops for no reason.
If you have Windows or a PC, use WD Lifebuard. Great at testing any SATA drive.
Quick format with zeroes. Then Extended Test. Maybe even Full Format with zeroes to insure no bad sectors.
When and where, at what point in time, did you use it and write files to it?
By "carrier" I assume you mean the drive sled to go inside the Mac Pro.
Did you ever use it in an SATA external other than WD? some of their MyBooks are moled into and drive and case cannot be used separated.

HP Envy 7640 driver won't install on Yosemite Mac OS 10.10.1

Similar Messages

Maybe you are looking for