Hp envy 7645 printer too small print

The print is tiny..How do I enlarge?

Hello @dyphilpot , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues with your printer freezing up. I'd like to help!
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend plugging the printer power into a different wall outlet.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Installing software for MAC 0S X 106.8 and ENVY 7645 all in one printer

Is there a way to download software so that my MAC OS X 10.6.8 and work with my new HP ENVY 7645 all-in-one printer?
If so, please tell me how to do that? Thanks!

Hi,
I afraid not.
The printer is only supported on 10.7 or newer OS versions, as listed within the System Requirements below:
http://support.hp.com/us-en/document/c04353671/
If your Mac support Yosemite you may upgrade your operating system to 10.10 for free:
https://www.apple.com/osx/how-to-upgrade/?
The other option os to replace the printer with another model which is compatible with your operating system.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Print too small to read

New HP Officejet J4580
All in One
Prints too small. When I disable shrink to fit to after enlarging font, it cuts off text.
How to print larger?

I use a Compaq laptop computer, belong to Frontier.Com and TRY to print on C3180 All In One. It was working fine, but now
when I print emails, the printing font is SO SMALL I can bearly read it. How do I increase this?
I do NOT have this problem when printing something from Internet other than email.
HP has not given me any help that works so far.

Print too small

HP 4600 printing too small. How do I enlarge using Apple Snow Leopard program?

What program are you trying to print from?
Photosmart or Officejet printer?
Wireless or USB?
Thanks,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Print too small, tried everything (I think..)

Hi
I recently installed the driver for this printer from the HP site and replaced some empty ink cartridges. So, printer now prints.
Trouble is, whatever I do in Preferences, or in Word, Acrobat, anything, the page prints too small and centred. The setting in preferences is A4
When I ask the printer to print the TEST pages, i.e the 'Self Test Diagnostic Page' and 'Print Quality Diagnositcs Page' they are both perfect and the correct size.
I am using an older version of Mac OS (10.4.....) but not had trouble before.
Any help/advice would be greatly appreciated. Many thanks.

Hi @migrations
If I am not mistaken, you need to increase the font size within the program you are printing from. Be sure not to increase the zoom, the font size needs to be larger for the print size to be increased.
You may also see a scale to option, or fit to page, in the print preview, this might help too.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Sc reen too small print cant read

Screen too small print how to make it larger as it used to be

Assuming you are on a Windows machine--------hold down the Cntrl key and tap the + or - keys to increase or decrease the size of the font. Cntrl + 0 (zero) should return it to the default.

Anything printed with firefox prints too small

anything printed with firefox prints too small. If I print and email it prints in the center top of the page and is just larger than a credit card. if I adjust the scale to 100% the it prints what could fit on one page onto 4 pages and prints a small portion in the center top of the page and is just larger than a credit card.

Ok i think i fixed this issues.
i went to about:config print.print_margin_bottom (and also left, right and top) and right clicked reset (it took out the previous 0.5 value). now the pages look normal on print preview without the large margin

Yosemite Apple Mail prints too small

After Yosemite upgrade the body of text in Apple Mail messages prints extremely small. 2 Printers tested - HP Laserjet 5100tn and a Konica Minolta 5500 with a Fiery controller. Printing to a PDF file first is OK.
This only seems to occur when I print messages that I've sent or when I print a message where someone has replied to a message that I sent previously. Only the body of the messages that I sent prints too small. The From, Subject, Date, To, My signature, and anything from messages that have been sent to me from someone else are all OK. In messages that were replies to me from messages that I sent to others, everything is OK except the body of the message that I originally sent to that individual.

I have had this issue as well and have not really been able to resolve it. Yosemite Mail app doesn't seem to have the option that previous OS did where you could choose "Scale Message to Fit," "Rewrap Message to Fit," etc.
Am I missing something here or did they disable this option? I know I can change font or increase font size in preferences, but I don't really need to increase font size for display, only for printing, which seems to be very tiny no matter what I try to do.

Print Too Small from Photoshop CS4 with HP 8500 All In One Printer

I'm running Windows XP with CS4 and latest patches and drivers. When I print an image to my HP 8500 All in one printer, the printout is too small. Instead of a centered 4 x 6 image on the page I get a 1 x 1-1/4 inch small print of the image in the upper left hand corner.
I re-installed CS3 and it works perfectly as do any other print options, such as word, etc. But from Photoshop CS4 I can find no way to print to this printer without the image shrinking in size. If I print to another printer at the same sitting, the image is fine. So it's a PS CS4 vs. HP 8500 unique problem I guess.
I've see this post in other forms and no help as yet. Does anyone have this one on their radar. I really like this printer, but it's quite annoying.
By the way, If I print to a PDF from PS CS4, the pdf file image is fine. That's another end around for printing also. HMMMM.
I did contact HP and they put the problem squarely back on Adobe. No partnership there.
Thanks,
Glen

Will the printer print from any app?
I know it sounds like a dumb question, but you didn't actually say... And I admit to looking for software problems on an occasion or two when I had forgotten to plug in cables.
-Noel

How can I get text printed out larger? It prints too small to read.

I have an hp psc 1610 all-in-one printer. When I print articles from the internet the text is too small. The options to change size only seem to affect the screen size, not the printer size. It prints fine in my word processor, etc.

File > Page Setup > '''Scale''' <br />
100% or Shrink to Fit is usually the best.
http://kb.mozillazine.org/Problems_printing_web_pages

Web printing too small

Any web printing I do is too small and I don't know how to reset the size. This started with Tiger. Any help out there?

reset

Print too small to read from printer with Page shrink on 30%

When printing some emails on Xerox 7225 the print is too small to read even with page shrink on 30%. latest email is from an AOL account and header lines do wrap. This problem is new.

Select the email
'File' > 'Print Preview'
You can change the size of the font by changing the 'Scale'.
increase the Scale to increase the font.
so start by selecting: Scale = 100%
When all looks ok, click on 'Print' button

Flex PDF Printing too small need 8 1/2 x 11

I am using Adobe Flex with IBI's WebFOCUS Enable. Once I export my SWT file to Adobe Flex in PDF format works fine on the screen until I print. Printing on 8 1/2 x 11 paper shows up in the lower left hand bottom about 4 times too small. I heard it has to fit Adobe flex pallet or be shrunk. Is there some conversion software to remedy this? Please adivse. Joe

Quick look at the "save as" feature has a list a mile long, including vector, autocad, xml, and more. Personally, I haven't used the program beyond playing with it and researching to discover it cannot do dates with the time period I need (though I imagine there might be a way to manually create the dates).
I've found Timeline Maker, and it looks like it can do what I need without a large learning curve. However, I would very much like to learn how to work most effectively in InDesign (rather than spread my learning across several programs). I do have a subscription to Lynda.com, and I have worked through a few tutorials, but I didn't apply what I learned immediately thereafter...and it seems I've forgotten much of what I learned!
If you have any recommendations for a novice working with InDesign CS5 who is trying to make a print book with maps, timelines, and perhaps an ebook with animations, I'd be grateful.
Presently, I'm setting up files to correspond with my outline. (Trying to manage chaos.) Any input in that regard would be appreciated. Since I'm working alone, I don't have the benefit of seeing any "industry standards".)
Thanks again,
Stacy

Printing too small

Hi all.
My printer that is connected to my AE (cannon pixma 4000) is printing everything too small. This is all documents in Word and images in Photoshop. I preview before printing go into every dialogue box available and make sure they are set correctly and still it is coming up too small. I hate having to save everything and open it on the PC to get it to print properly.
This is a recent thing that happened as it was printing the correct size before.
Any ideas folks?
Thanks Alison.

Hi Ish2,
Have you tried shutting down the computer (not a restart) and then doing a Hard Reset on the printer as described in the next link. Click Here After powering up the computer, is there any difference?
If you do a Print Preview, does the page appear as it should?
What is the scale set on?
If you click on Print from the Print Preview window, does that make a difference?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Airport printing prints too small

I recently bought a used Airport Extreme 4th generation, and have it hooked up to my 2009 Mac Pro with Mavericks. I got my old Epson R2400 to work wirelessly hooked up to the Airport- great! One big problem is that all of my prints are coming out half size? I know how to pick 100% in the Epson printer dialog, but with everything the same as it was with the USB connected to computer presets, it comes out too small?
I looked at document setup in Photoshop, etc., no luck.
Anyone else solve this problem or have suggestions?

It just may be that you need to install the latest print driver for this printer. The following link is from Epson support for your Mac.

Hp envy 7645 printer too small print

Similar Messages

Maybe you are looking for