HP Envy 7645 Squeak While Printing

The printer is quiet while at rest. When I click print to send a document to the printer, it activates and right before it pulls the first sheet through the squeak starts and has 2-3 squeaks as it is printing. I just printed a two page document and the second page did not squeak. I am using surge protector.I did check to be sure the priner is updated.I did perform other maintenance such as align printer and clean cartridges. I'm a bookkeeper and also assist with legal documents. I print a least 20 pages a day, sometimes more depending on the type of project I am working on. The printer is about 6 months old. It did not squeak when it was brand new. Not sure when the squeaking started but it is getting worse.

Hi algoin,
I understand you have an Envy 5530 that has been causing you quite a bit of frustration. I'm sorry to hear this but I will certainly do my best to assist you.
Because you have enrolled your Envy in the Instant Ink program, I would suggest that you call in to HP Cloud Services (1-855-785-2777) for troubleshooting assistance. These agents are specifically trained on the Instant Ink program and can better assist you with the issues.
I hope this helps, and they are able to help resolve your printing issues
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

HP Envy 7645 won't print from photo tray

FIXED my own problem!Never thought to try setting the paper size to 4x6 in/10x25 cm! That's apparently what I get for being metric-phobic (or ignorant). But really, why provide a 4x6 option in the first place? I can't get my Envy 7645 printer to print from the photo tray. I'm specifically trying to print from the Photos app. I select the print option, set the printer, paper size (4x6), and paper options to "print from photo tray." I select print, and the HP print dialog appears and from there I am unable to set the photo tray as the paper source. The dialog comes up with "Default Settings" as the Presets option and when I scroll down through the dialog to select the Paper Type/Quality option, it shows paper type as HP Photo Papers, Quality is set to Normal, and the Source is set to Automatic (which fails to print from the photo tray; it defaults to the main tray). When I try to shift from Automatic to Photo Tray, I get an error message that says "The paper size selected is not supported by the Photo Tray. To print with the Photo Tray, go to the Page Setup dialog, choose a paper size supported by this tray, and then return to the Print dialog." At this point, I have no idea where to find the Page Setup dialog (it's not immediately apparent in the avialable options and I can't seem to find it under any of the Photos print options). Further, I don't understand why I'm getting the error in the first place as the paper installed in the tray is, indeed, 4x6 (as set in the original Photos dialog). I've tried playing with any number of varities of options (e.g, changing from HP Photo Papers to the generic other photo papers option, not specifying size of photo paper) and any time I select the photo tray option, I get the error message.

Hey , Welcome to the HP Support Forum. Did you still need assistance? I see that you have some interface questions about printing photos from a Yosemite Mac using your HP ENVY 7645 e-All-in-One Printer. I would like to help. Have you installed your printer's full-feature driver on the Mac? If not, click here to install. Also, for your information, your printer's specifications re: supported photo paper sizes is available here. When I tried printing a photo from my Yosemite machine (albeit with a different printer) this is how I configured the print job: If I had the option I would also recommend setting the paper type to correspond with whatever kind of photo paper you're using. If this approach doesn't help try the following steps: Uninstall your printer - click here for instructions. Repair disk permissions on your Mac - click here for instructions. Once you've finished running the above-noted utility, restart your computer. Lastly, click here to reinstall your printer. Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!

Installing software for MAC 0S X 106.8 and ENVY 7645 all in one printer

Is there a way to download software so that my MAC OS X 10.6.8 and work with my new HP ENVY 7645 all-in-one printer?
If so, please tell me how to do that? Thanks!

Hi,
I afraid not.
The printer is only supported on 10.7 or newer OS versions, as listed within the System Requirements below:
http://support.hp.com/us-en/document/c04353671/
If your Mac support Yosemite you may upgrade your operating system to 10.10 for free:
https://www.apple.com/osx/how-to-upgrade/?
The other option os to replace the printer with another model which is compatible with your operating system.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Quick Forms won't print on my HP ENVY 7645

Most of the apps work on my HP ENVY 7645. However I'm not able to print anything on the HP Quick Forms. Any solutions?

Hi @trissak,
Welcome to the HP Support Forums. I gather that you are unable to print using the HP Quick Forms printable found on the front of your Envy 7645 printer.
Once you have chosen the form that you would like to print (for example 5mm graph paper) you should see an example on the screen with a blue “Print” button in the lower right hand corner. Before pressing the print button, please tap on the example form and hold until you see the number of copies choice appear beside the example. Once the number of copies is chosen, please tap on the blue print button. The form should then print.
Please let me know the outcome.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP ENVY 7645 printing

I just bought a new HP ENVY 7645, it is installed and works wonderfully. My question is: am I able to print standard checks individually? I think I saw something indicated during setup, but I can't find it now.

Hi @GBFlor,
Welcome to the HP Forums!
I see that you are wondering if you can print checks individually with your HP Envy 7645. I am happy to look into this for you!
For further assistance, I will need some more information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, Ethernet, or USB.
The type/size/weight of the paper you are using.
In the meantime, here is your printer's user guide, HP ENVY 7645 e-All-in-One Printer User guides.
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My Envy 7645 does not have the grayscale option in advanced set up to print in black and white

My Envy 7645 does not have the grayscale option in advanced set up to print in black and white

Hi , Welcome to the HP Forums! I see that your HP Envy 7645 does not have the grayscale option in advanced set up to print in black and white, on Windows 7. I am happy to help! It is possible, that you may only have the basic driver installed, instead of the full feature software and drivers. I would recommend to try our HP Print and Scan Doctor first, to see if ti can resolve the issue automatically. Otherwise, please try the following steps: Uninstall the software. Uninstalling the Printer Software.Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Turn Windows Firewall on or off.Create a new user account. Managing User Accounts and Logins (Windows 7).Reinstall using the HP Printer Install Wizard for Windows. Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

HP Envy 7645

We are having a COPY problem Houston! My second HP Envy 7645 was just purchased at Costco a month ago. (Took the first one back for the same problem) Works fine when printing wireless from either a Macbook Air running Mavericks or Hp Pavillion laptop running windows 8.1, BUT when I try printing a single-sided (or double sided) copy from either the ADF or the glass, I get nothing, nada, zip. Basically feeds the document in, makes some noise then hangs with the busy icon running. To clear I have to cancel printing and turn off the printer. After restarting the copy function works just fine either from the ADF or the glass.

Hey there @LisaDA ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I see you are having a bit of trouble with the printer going into sleep mode and not responding or waking up when you need it to/ask it to. Sometimes printers get these sleep mode issues as they are really moody being that just need a kick in the butt from time to time to get them in the working mood.
I am linking a document below that addresses this issue and explains some of the reasons why it might be happening and steps to stop it from happening/re-occuring. Hope it helps you out and solves the issue for you. If it does not just let me know and I'll give you some further direction.
The HP Printer Won't Turn On or Respond When the Power Button is Pressed
Have a great day and a wonderful/safe holiday season!
I worked for HP.

Envy 7645 photos coming out poorly

When I print from my brand-new Envy 7645 (on photo paper) using the computer, no matter what settings I use, the printer "rushes" through the job. Quality is fairly good with good contrast and crisp, sharp blacks, except there is severe banding with a light stripe every 3/4 inch in the dark sections of the photo.
When I print directly on the printer by inserting a SD card, using exactly the same paper, the printer "takes its time" as you would expect when printing photos. The bands are gone, but the photos come out muddy. Blacks are brownish and contrast is poor. This seems like it must be the printer's "photo printing mode".
It seems to me that what is happening is, in "photo printing mode" the printer is using only its color inks, leaving muddy blacks, but when I print from the computer it is printing in regular quality mode, but correctly using black AND color ink to achieve rich blacks.
Is there any way to tell this printer to both take its time, printing in photo mode, but ALSO using its black ink to get rich blacks?

Hi @orulz,
Welcome to the HP Forums!
I see that your photos are printing poorly with your HP Envy 7645. I am happy to help you with this print quality issue!
Please take a look through this print quality guide, Fixing Print Quality Problems for the HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e-All-in-One....
Hope this guide is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I can not change the language to englis on my hp envy 7645

I can not change the language to English on my hp envy 7645 all in one printer. I have pushed the tools button but it does not say preferences. It only list about six foreign languages and I have no option for English

Touch/press Settings,
Touch Preferences (second row, the fitst row is sub-menu),
Touch Set Languages (second row again),
Now you can touch English
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Envy 7645 Cannot connect to web services

I have a new Envy 7645 that cannot connect to the web services.
Things I have tried:
Verified Internet access. The printers "Web Access Test Results" report shows "No problems found"
Verified wireless connectivity by connecting to the printers Embeded Web Server
I statically set the DNS to 8.8.8.8 (primary) and 8.8.4.4 (secondary)
The IPv4 address was assigned via DHCP so I changed it to static (manually) assigned
Re-verified wireless connectivity by connecting to the printers Embeded Web Server with the static IP
Lots of printer reboots to make sure the changes took effect. (Have you tried turning it off and on again? Ha!)
Logged into the https://www.hpconnected.com website
The printer is registered under my devices tab
The printer status is "offline" (I assume this would change if the web services were working)
Any help would be appreciated.
This question was solved.
View Solution.

Hello treadwayl,
Welcome to the HP Support Forums!
Thanks for putting the time in to a very informative post about the ENVY 7645 not being able to connect to Web Services. When you attempt, what is the exact error or message?
I would like to you try the DNS of: Primary DNS Server = 209.244.0.3 & Secondary DNS Server = 209.244.0.4
Re-boot printer and router, then try again to connect.
Let me know the out come, cheers.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Error while printing.

Error while printing.

PowerPC Mac 10.4.11, Print with Safari with: Error while printing.
Others AP: Printer Setting Utility can't pop up, no effective.

How to use different pageFormats while printing in the same book object.

Hi All,
I m able to print Multiple pages, but the problem is when i want print multple pages with different pageformates I mean One pages having 4X2" size and another one is 5X5", while print second page objects not appears properly
Pls see the below code to get the problem.
any works around this will be appreciated.
import java.awt.BasicStroke;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.geom.Rectangle2D;
import java.awt.print.Book;
import java.awt.print.PageFormat;
import java.awt.print.Paper;
import java.awt.print.Printable;
import java.awt.print.PrinterJob;
public class MultiplePageFormatTest
public static void main(String[] args)
MultiplePageFormatTest example3 = new MultiplePageFormatTest();
System.exit(0);
private final static int POINTS_PER_INCH = 72;
public MultiplePageFormatTest()
PrinterJob printJob = PrinterJob.getPrinterJob();
Book book = new Book();
PageFormat documentPageFormat = new PageFormat();
PageFormat documentPageFormat1 = new PageFormat();
Paper paper = new Paper();
Paper paper1 = new Paper();
paper.setSize(4.5 * POINTS_PER_INCH, 2.5 * POINTS_PER_INCH);
paper.setImageableArea(.25 * POINTS_PER_INCH, .25 * POINTS_PER_INCH,
   4 * POINTS_PER_INCH, 2 * POINTS_PER_INCH);
documentPageFormat.setPaper(paper);
paper1.setSize(5.5 * POINTS_PER_INCH, 5.5 * POINTS_PER_INCH);
paper1.setImageableArea(.25 * POINTS_PER_INCH, .25 * POINTS_PER_INCH,
   5 * POINTS_PER_INCH, 5 * POINTS_PER_INCH);
documentPageFormat1.setPaper(paper1);
book.append(new Document(), documentPageFormat);
book.append(new Document(), documentPageFormat1);
printJob.setPageable(book);
if (printJob.printDialog())
   try
    printJob.print();
   catch (Exception PrintException)
    PrintException.printStackTrace();
private class Document implements Printable
public int print(Graphics g, PageFormat pageFormat, int page)
   Graphics2D g2d = (Graphics2D) g;
   g2d.translate(pageFormat.getImageableX(), pageFormat
    .getImageableY());
   g2d.setPaint(Color.black);
   g2d.setStroke(new BasicStroke(
    2));
   Rectangle2D.Double border = new Rectangle2D.Double(
    0, 0, pageFormat.getImageableWidth(), pageFormat
     .getImageableHeight());
   g2d.draw(border);
   return (PAGE_EXISTS);
}

Hi,
Till now this question is not answered.........
Any Answer around this deeply apprciated.
Edited by: DoraiRaj on Sep 29, 2009 3:55 AM

Save to PDF in TextEdit - Error While Printing

When I try to save a text file to PDF I receive the error message - "Error while printing". This only seems to be happening to text files I open or create in TextEdit. It works fine if I log in as a different user. I've run repair permissions and also deleted a couple of com.apple.print plist files in my user library, but the error remains.
Is there anything else I should try short of reinstalling TextEdit?
Thanks in advance for any advice!
Rick

On OS X 10.8.2, with TextEdit, I can open or create text documents and export to PDF without any issue.
Here are the two preference tabs and settings that work for me. You can single click on the images for a larger version.
New Document
Open and Save
PDF documents on OS X are created with binary content, which is the junk you observe.

Automatic archiving FI invoices while printing

Hi guys !
I need to build an "archiving system" for FI documents.
The overall requirement is to archive all invoices in pdf format in external system (let's call it ES), and then link those documents to SAP FI module
My initial concept was to save PDF documents on physical hard drive, new documents would be triggered by ES, processed and the link is somehow sent to SAP and then linked to particular invoice.
Another approach would be to call WS on ES side, push document and receive a link in response.
Which solution is better? Maybe there is another approach to achieve given requirements?
What is more, is there any standard procedure to archive document, on physical drive or send, while printing invoice or it just require to create some custom enhancement in printing process?
And the most mysterious subject to me, how to link SAP invoice with external source and let SAP to display external document? Hope it is achievable with Archivelink, do you have some good source of tutorials on ArchiveLink ?
Unfortunately I have never occupied with Archiving module and I really need your piece of advice.
Greets,
Adam

Your answer did help but still expriencing challanges with the following:
Output Types
-Print Parameters options are as follows
    >Plant/Storage location
    >Plant/Storage location/User group
    >User exit
   >User parameters
   >User
Please advice which of the above is appropriate?
-Should there be a program reflected on change output field for General data screen?
Please advice since I'm currently experiencing shotdumps(runtime errors) when processing the GR.

Web Analysis report is not coming with the border/logo/heading while print

Hi All,
I am using 9.3.1 version of hyperion planning were Web Analysis report is not coming with the border/logo/heading while printing with the option "print all object", Only the data grid is coming in the print. If I use "print screen" it is coming with border/logo/heading but it gives a screenshot of the report, that won't cater out need.
So please suggest us with a resolution to have border, logo and heading, while using Print all object.
Thanks with regards....
Rao

Hi Sagar,
In scripts when you will see print preview the logo will be not shown up with clarity.Take the print out of the document and check whether logo is printing up with clarity.
Thanks
Phani

HP Envy 7645 Squeak While Printing

Similar Messages

Maybe you are looking for