Hp envy dv6 model 7226nr bios admin password reset

yes I am  OperationDumbo when it comes to cpu's nowadays...I read and learn a little & then become very dangerous...I have a smart cpu friend to help me...he didn't know about my cpu and resetting the bios admin password...he suggested unplugging battery for 20 min and didn't work..I have tried every passw I thought it might be & wrote it down on my cpu paperwork which got lost in a move.....sure would appreciate any ideas you have for resetting it...After I tried what I thought it was 3-4 times I get an error message14284278...I tried that # and it didn't work either...I haven't figured out how to post in this forum yet so I pm'd you...I guess I have an acct to see if you respond... TY kind Sirs!
This question was solved.
View Solution.

Hi,
Enter:     01182878
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • How to recover BIOS Admin password on HP ProBook 4740s?

    Excuse me, do you know how to recover BIOS Admin password on HP ProBook 4740s?
    My support period already over. But I don't no BIOS Admin password on my notebook...
    Thank you.
    This question was solved.
    View Solution.

    Hi,
    Unfortunately,  business machines such as Probooks or Elitebooks have more stringent security than consumer models - they don't produce 'halt codes', the password cannot be derived from the Serial No. and the code is stored in non-volatile memory so removing the RTC cell will not reset the password in this case.
    If you Contact HP Business support they should be able to send you a customised SMC.bin file which you can use at boot to reset the password.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Dell M1330 BIOS Admin Password

    Check out the sticky post in this group from Dell; they can't help with that here anymore, you have to contact support.  

    Need help clearing the BIOS Admin Password. Not Windows password, not BIOS "system" password.  This is the BIOS Admin Password.  I have already tried removing the CMOS battery to clear and that did not work.  I understand there is a way to "break" the password for these systems.
    Can you help with a password for this system?
    System Number: 6rq08j1-595b
    This topic first appeared in the Spiceworks Community

  • G6 and i forgot my bios admin password [ 67372066 ]

    i have HP Pavilion g6 and i forgot my bios admin password because i didnt visit my bios settings for long time. When i try wrong password it gives a number after the third attemp that is [ 67372066 ] . please help how can i reset my password
    This question was solved.
    View Solution.

    Hi,
    Enter:     78050068
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Forgotten Bios Admin Password COmpaq CQ-62

    Hey guys, 
    I have unfortunately forgotten my BIOS admin password, I still have my startup password, but for some unknown reason I made the BIOS admin one different. I have now tried too many times and all I get is an error code 58827813.
    Can anyone help?

    Hi,
              Try the below code
    47785235
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • BIOS admin password recovery (aka "system disable")

    Hi,
    I will be very grateful if someone could help me to reset BIOS admin password on my HP Pavilion tx2500 - I didn't use it for more than one year so the password is obviously forgotten.
    After 3 invalid attempts it displays "System disable Key: 72015992"
    Thank you!
    This question was solved.
    View Solution.

    Hi
    Try: 63973314
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Lost bios admin password.

    hi im locked out of my laptop. have tried going into bios . but need admin password. after 3 atempts i get code 63540905. please help

    Try entering
    72428321
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Bio Admin Password

    I'd like to request the bios administrator password. System disabled code is 63919717.
    Any help is appreciated.
    Thanks!
    This question was solved.
    View Solution.

    Hi,
    Enter:     72671339
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Oracle Virtual Directory (ovd) admin password reset

    Not that I have to do this but for troubleshooting purposes, I wanted to reset the binding/cn=admin password.
    The passwd file is under [ovd root]\conf\htpasswd
    And the utility is under [ovd root]\lib
    Specifically, the htpasswd file looks like a key value pair with some sort of hash. A comment line at the top of this file says "use org.mortbay.util.Password to generate crypted passwords" so I tried running a jar that looked promising but it looks to start up an :8080 service.
    Where is the documentation that addresses this file or password reset? The password was set during install, is that the only way you can reset it if it is lost (mine is not, just wondering)?

    This can be done using the OVD Manager (GUI) software. Use the OVD Manager to connect to the OVD Server and navigate to the Engine>Server>Security tab. From there you can simply enter a new password for CN=Admin.

  • Thin client T610 Zero Core admin password reset

    I forgot admin password on T610 thinclient.
    How can i reset it ?

    Hello Hardw,
    You are in the HP consumer products forum.
    You will also want to ask in the HP Enterprise Business Community.
    Here is the specific area for Thin Clients.
    http://h30499.www3.hp.com/t5/Workstations-Thin-Clients/bd-p/bsc-635

  • Admin password reset problem. Help!

    I just bought a used MBA (late 2010, 10.6.5), and I do not have the admin password. I also do not have the USB drive that came with it.
    I would most like to perform a clean install, but at this point I would be happy just resetting the password.
    Here's what I've tried:
    - Tried booting from my Snow Leopard disk using Remote Install.  My disk has a version (probably 10.6.0) which is too early to work, apparently. The MBA has a kernel panic.
    - Tried looking for ways to set another admin account via terminal command. Can't find out how this is done without the existing admin password.
    Any way to do this without the thumb drive and without a later version of the Snow Leopard disk?
    Charlie

    See this Apple note on resetting the admin password. Under "resetting the original administrator account password" it discusses how to deal with changing with no DVD drive available.

  • HP Mini 5103 - BIOS Administrator password reset

    Hi
    a) How can I reset a locked BIOS Administrator password for HP Mini 5103, Bought it on second-hand
    b) After input three invalid password shows system locked without any code
    c) How can I set to see system disabled code? instead of seeing On-Screen Keyboard?
    Thanks

    Vcheong.
    Look at my post here.
    http://h30434.www3.hp.com/t5/Notebook-Recovery/HP-5102-5103-BIOS-password-reset/m-p/4585558
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Admin Password Reset on HP OfficejetPro x576dw MFP

    I am locked out of my printer admin.  I am trying to do a firmware update and cannot do it using HP's Firmware updater, it doesn't seem to get past the spinning emblem on the updater window.  I would like to update the firmware on the printer but from what I've seen so far I need to get past the admin password.  Tried every conceivable password and I don't get in. Thanks

    Hi CDrumeller
    I understand you need to reset the Admin Password.
    I will send you a private message with this information.
    In the forum beside your handle name just click on the envelope to view it.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Envy M6-1208tx Bios Administrator Password Reset

    Hi,
    I'm having a problem with my HP laptop. Whenever i try to enter the Bios Setup, I am asked to enter Administrator Password - which I don't remember setting up on this computer. After several attempts, I receive this warning, System Disabled - 50436952.
    Please help me reset my Bios password. My laptop is HP Envy M6-1208tx.
    Thanks!

    Hi,
    Please try:
        45594394
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Envy 4501 admin password reset

    I have been looking all over the net and can not find the information on how to do a factory reset or cold reset of my printer, as I have forgotten the password I had set up for the admin so I can change the settings.I
    Thank you for your time.
    This question was solved.
    View Solution.

    WOuld you post the results you found which solved your problem?  It might give me a han d in solving my same problem.
    Bill

Maybe you are looking for

  • Report data binding error unknown column name

    Hi, I am having a problem with the new 7.02 update of Report Builder. The issue is it's not finding my SQL query. I have wrote my query initally in the advance mode, and it doesn't seem to reconize it. Is there an issue with this? I did manage to fix

  • The best way to do paging and get total rows count given a sql statement

    Hi, Just got a quick question.... what is the best way to do paging as well as the total rows count given by a sql statement. e.g. "select * from emp" 1. I need to know the total row count for this statement. 2. I also need to do a 10 rows per page..

  • Messages app quits when closing window

    I have an iMac (27-inch Mid 2011), Mac OS X (10.8.2), Messages Version 7.0.1 (3314). I already tested Messages before, but decided to uninstall it as it was too buggy. Since upgraded to Mountain Lion, whenever I close the Messages window, it quits th

  • Force password reset

    Hello, is it possible to force a user to reset/change their password the next time they log into the site? Thanks in advance. Mike.

  • Making a button a link?

    I have a form that already has an update applied to it so the form already has a page that it links to but I want an additional button to just link to another page...(delete). Is there a way to make the delete button a simple link so that one button