HP ENVY DV7-7212nr Possible Motherboard Failure?

HP ENVY DV7-7212nr
Windows 8 (Factory) upgraded to Windows 8.1 Pro thru Windows Store.
8 GB DDR3 RAM
NVIDIA GeForce GT 650M 2GB GDDR5
750 GB HDD with 32 GB mSSD Cache
Ralink RT3290 WiFi Card (Starting dropping connections a few days before this happened)
Last night, I was using my laptop normally, and set it down to play a game. During the game, it died, and not even thinking about it, i just returned it to my desk for the next day.
Well, today, I charged it up, and went to turn it on and I get next to nothing! The power LED remains on solid, and the hard disk activity is solid for about 2 seconds before shutting off. The screen is blank, there are no blink or beep codes and the WiFi LED does not change colors indicating the computer has at least booted.
Being an IT technician, I removed the RAM and reseated it. That did not help. I also tried booting without the hard drive plugged in. That did not help either. I also tried the Win+B BIOS recovery with my hard drive and a USB drive, and no luck there iether. The last (probably) worst part is this...I removed the RAM and powered on without it, and still, no blink or beep codes. 
At this point, I believe that my laptop has a failed motherboard, but I just want to check from now until I get the chance to call HP support if there is anything else I can try. My warranty expires in only three weeks, so at least it happened before, not after.
Also, does anyone know the direct phone number to HP support that is on-shore in the USA. I have never had a good turn-out speaking with the off-shore support, and would love to work with someone who can help me better right off the bat.
Thanks!
Please Click "Kudos" to show your appreciation for me.
If this answer worked, please mark this reply as an answer.
This question was solved.
View Solution.

Hi,
Thanks so much! I will be sure to contact that way. 
Please Click "Kudos" to show your appreciation for me.
If this answer worked, please mark this reply as an answer.

Similar Messages

  • Can I install a 2nd hard drives to an HP Envy Dv7-7212nr unit

    I just purchest a HP Envy Dv7-7212nr and the specs states there is 2 hard drive bays, When I opened the compartment were there the drives gose the secound bay has no connecter for the secound hard drive. can i purchase the connecter?  

    Here are the specs for your HP ENVY dv7-7212nr Notebook Computer. Here is the HP ENVY dv7 Notebook PC Maintenance and Service Guide for your computer. Here is the HP parts list for your computer.
    From the part list, it looks like you need HP p/n 681976-001  -  Hard Drive Disk HARDWARE KIT. From the service guide, "
    Hard Drive Hardware Kit (not illustrated, includes hard drive bracket, primary hard drive connector cable, secondary hard drive connector cable, and screws)  -  HP p/n 681976-001"
    You can order the part from the HP Parts Store>>> HERE.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Envy DV7 7212nr - I need the BIOS backup file.

    Hi,
    I installed the Lojack software on my laptop and the windows stopped working and started showing a blue screenerror. Because of this my laptop don't work and I can’t restore or reinstall Windows.
    My laptop is a Envy DV7 7212nr.
    The only solution is to rewrite the BIOS chip. But the BIOS file that HP provides to download can not be written directly to the chip because it is very large and can only be used when the laptop is running normally (this is not my situation).
    So I need a BIOS backup's file to get record the BIOS chip. But as I don't have this backup file, I need another laptop like mine to get this BIOS backup file.
    So I need someone who has this laptop help me.
    Please, if you have the Envy laptop DV7 7212nr and you know make a backup the BIOS, please send this backup file it to me.
    If I do not get this BIOS backup file, I will not have to fix my laptop.
    Recalling that the file that HP offers for download not work. I need the file obtained by backup BIOS directly of a laptop Envy DV7 7212nr that is running normally.
    Thank you.

    This is the process to rollback to working version of BIOS.
    1-Immediately after powering on hold/tap the Esc key.
    2-When the menu appears, tap F2 for System Diagnostics.
    3-In the list of items will be BIOS Management.Use the arrow key to move down & highlight it.Press Enter key.
    4-You should now have a Rollback BIOS option.Use arrow key again to highlight and press Enter key.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Bought a hp envy dv7 7212nr can i upgrade the mssd drive

    Have an hp envy dv7 7212nr it has a mssd 32gGB can it be upgraded?

    Hi,
    Yes you can but you have to change/reconfig the setup. Like my machine, at this stage it's a "cache" drive for IRST
       http://www.intel.com/content/www/us/en/architecture-and-technology/rapid-storage-technology.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Envy dv7-7212nr and Windows 7 64Bit

    Just finished downgrading Envy dv7-7212nr from Windows 8 to Windows 7 Ultimate 64Bit.  Below is the list of drivers and software paks needed to get everything working.
    Hope this helps any of you having issues with wireless or fingerprint drivers.  All function buttons and on/off buttons working as they should.  You may need additional software if you changed your boot drive to SSD or if you change the wirless card as I did.  Currently running an Intel SSD and Intel 7260 dual band wireless card.
    Caveat:  I have tried every combination of BIOS setting and boot possibilities to try to get Win7 to install in UEFI mode with no luck.  Tried Microsofts boot procedure, rufus installer, installing from DVD, installing from USB.  No luck.  It gets through the boot and at the Windows opening screen with the floating squares merging together, it hangs.  That's as far as it gets.  Only success has been installing in Legacy mode.  If anyone has a solution to this... I would be happy to listen.
    Like I said... running fine in Legacy mode.
    All of these upgrades were run AFTER all updates from Microsoft Windows Update were installed.  You can then look for updates from this point on after doing the below installs.
    All done with a clean install on a bare SSD using the Win7 iso files available from Microsoft web site.
    Anyway... the drivers and sofpac installers below all work:
    Intel Driver Update Utility Installer - avail at Intel site
    Intel USB 3.0 eXtensible Host Controller 1.0.101.255- avail at Intel site
    sp64959 - Intel chipset driver
    sp59653 - Realtek PCIE Controller
    sp62291 - HP Support Assistant
    sp63599 - UEFI Support Environment Diagnostics
    sp64144 - 3D Drive guard
    sp64205 - Intel My WiFi
    sp64740 - Cyberlink Power 2 Go Software
    sp64854 - Cyberlink Media Suite Software
    sp64958 - IDT Audio Driver
    sp64961 - Intel Management Engine Interface
    sp64963 - Intel Rapid Storage Technology Driver
    sp64966 - nVidia High Definition Video driver
    sp64969 - Realtek Card Reader
    sp64968 - Realtek Local Area Network Driver
    sp65424 - HP Cool Sense
    sp65790 - Cyberlink LabelPrint Software
    sp65795 - Cyberlink YouCam Software
    sp65796 - Cyberlink PowerDVD Software
    sp66111 - Synaptics Touchpad
    sp67075 - Validity FingerPrint Driver
    sp61399 - SimplePass Fingerprint Security Software
    Hope this is a help to some of you.  Machine runs great in Legacy mode with Win7 and these installs.
    Again... if anyone has success in installing and setting up in UEFI mode - I sure would appreciate some detailed step by step instructions.
    Thanks again!

    'sHi,
    Are you using this driver? Are you getting no sound from your microphone or is nothing being recorded?
    Please go to Control Panel, Sound make sure that the Microphone option is set as default and that the mic levels are adjusted accordingly, not mute.
    If this is not working for you, Customer Support can be contacted using this http://support.creative.com/Downloads/searchdownloads.aspx?filename=

  • How do I install a 512MB SSD in my ENVY dv7-7212nr Notebook PC?

    My dv7-7212nr Notebook has a 640GB HDD & a 32GB MSATA running Windows 8.1 on Intel 4-core CPU. I bought a Crucial 512GB SSD and an Install Kit with cloing software. I cloned the drive onto the new SSD with no issues. I removed the HDD and installed the new SSD.
    Upon boot up got "Your PC needs to be repaired Error Code 0xc000025". 
    I removed the new SSD and reinstalled the original HDD and it booted up fine. I removed the HDD again and installed the new SSD but this time I also removed the existing 32GB MSATA SSD (what a pain getting to it).
    Upon boot up I got "A required device isn't connected or can't be accessed Error Code 0xc000225"
    The new SSD shows up in the bios boot order.  What am I doing wrong?

    Just boot from it and select repair your computer 
    Here is a Microsoft tutorial:
    http://windows.microsoft.com/en-us/windows-vista/h​ow-do-i-fix-a-boot-startup-problem
    You are going to perform a startup repair and it should replace boot files onto the SSD. The files you cloned from the old drive onto the SSD should be enough for the repair disk to see that there is a repairable Windows 8.1 installation on the drive and put the extra files needed to boot up onto it. It could take 2 or 3 restarts. 

  • Hp dv9000 possible motherboard failure

    I have had my dv9000 for about 3 years. This problem just started yesterday. Basically, it won't start. It worked ok in the morning, then I put it to sleep to take it somewhere. However, when I tried to open it back up, nothing happened. I hit the power button and the lights came on for a second or two and the fan started up, but I heard nothing else and then everything just turned off. I have tried to hit the power button again and again, but the same thing happens, the lights come on for a second, the fan turns on for a second then it all dies. I have disconnected the battery and tried it, and have tried it on battery only, no luck either way. I have also tried to flash the ram and it has done nothing either. I originally thought it might be a hard drive failure, but then I was told that it is probably the motherboard. I don't necessairily want to go and spend the money on a new motherboard if that isn't the problem, but I'm not positive what the problem is, or if its even worth the money to try and replace it. Any help would be appreciated.

    I have the same problem.  The Laptop worked two days ago, crashed (powered off) and will not boot.  All of the blue LEDs light for 1 second when the Power Button is pressed then go out.  Unlike the original post, I do not hear any fan or any other sounds.  Local PC store told me what others have posted.  Motherboard issues like this are common on these models.  Not worth fixing.  What a waste of money.  This laptop was used in-home only as a desktop replacement.  The furthest it ever traveled was between floors.  Never dropped, never damaged in any way.  Obviously a design flaw that cost me a bunch of $.  I hope HP monitors these forums.  They can see how many devices I have personally registered in the past, not to mention the ridiculous amount of HP hardware I have also been responsible for purchasing at work.  Perhaps they can calculate just how much future business they have lost due to this cheap piece of junk.  By the way, this is the first total failure of a personal computer, (Laptop or Desktop) since my first purcahse in 1994.  Yes I have had equipment failures (Power Supply, A/C Power bricks,Laptop Screens, Audio and video cards and memory) but never a failure that would render the entire system useless and worthless.  Disgusting.

  • Issue with HP Envy dv7-7212nr

    I want to report an issue.  Thankfully I have recovered from this.  My PC started beep with each mouse click.  When I restarted the PC a blue screen appeared that said "Your PC needed to be repaired error code 0xc00000f a required device
    isnt connected or can't be accessed.  I tried several times to run recovery to reinstall the software from the recovery disk but got the same screen.  Finally the system corrected itself and I was able to start it.

    My PC did the same, not even needed to click the mouse, at every movement of it I've got the bips. I had no error message. Solution: disconnect and reconnect the mouse cable from the computer. Everything was fine after that. Issue not related with HP.

  • BIOS update failed - DV7-7212nr

    I tried updating the BIOS of my laptop Envy DV7-7212nr with the sp60050.exe file, but the procedure was unsuccessful despite having followed all the guidelines for the procedure. After rebooting the computer, screen does not lit anymore. I waited for several hours, but nothing happened. Now when I try to connect the laptop, the power button light turns on, but nothing happens. The screen remains unlit. Is there any way to restore the BIOS to its previous state?
    This question was solved.
    View Solution.

    You notebook is recent enough that it has a UEFI environment on the hard disk thta shoulod enable you to roll the BIOS back to the previous version.
    Try a hard reset as follows:
    1) Remove the battery and unplug the DC power adapter.
    2) Press and hold the power button for more than fifteen seconds.
    3) Plug in the DC power adapter (leave the battery out for now)
    4) Press the power button
    Immediately tap the Esc key to enter the Startup menu and choose F2 to access the System Diagnostics. In the HP PC Hardware Diagnostics UEFI menu there is an option  caled firmware management. Select it to enter the BIOS Management menu. Select the BIOS Rollback option. Select Rollback Now. 
    Please post your positive or negative results here in your thread. 
    If what I suggested does not appear to be a possible option after the hard reset, then Contacting HP for warranty service is the next thing to do.
    Is your notebook still within the standard (free) warranty term?
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How do I get my dv7-7212nr notebook to recognize a second HHD?

    I installed a 512GB SSD as my main drive on my ENVY dv7-7212nr Notebook. I removed the partitions and formatted the original 750GB HDD. I bought the HP kit for the second drive and installed it onto the HDD.
    Issue 1:  There are no mounting threads in drive bay 2 for the 2 screws to attach the HDD bracket to the notebook. They are obvious in the drive one bay. Is this a factory oversight or do I need to order something else?  I jerry-rigged  it temporarily.
    Issue 2:  After I installed the formatted HDD the system would not recognize it. I can't see it in the BIOS, or Disk Manager or Disk Partition Manager Pro.
    Suggestions?

    Hi,
    Issue 1: No, you have to by caddy and cables for the second bay. The following part would do:
                   http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=498
    Issue 2:  Please fix the isue 1 first.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Is it possible to upgrade/add a graphics card to a Hp Envy dv7 dv7-7243cl laptop

    I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Envy dv7 dv7-7243c laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card.
    Mostly I've come across the unfortunate agreement that most laptops cannot have their graphics cards upgraded/swapped out, since the graphics card is soldered on to the motherboard. However, after talking to an HP "support representative", they said they believed it was possible to add a graphics card, as long as it is compatible with the  Motherboard my computer has.
    Furthermore, after finding the maitenence and service manual online for my computer ( http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf ) it says that it could have come with switchable graphics, specifically the Nvidia Geforce 630M or 650M. 
    So I am wondering, is it really at all possible to add a dedicated graphics card, either by having switchable graphics or something else? Or am I stuck with the integrated Intel HD graphics? 
    If I can upgrade/add a new card, where would I be able to find/buy a compatible one, and would I be able to install it myself or would I need to go to a local computer repair?
    My laptop is the HP Envy dv7 dv7-7243cl Entertainment Notebook.
    It has an Intel Core i7- 3630QM CPU @ 2.40 GHz, 12 GB memory, 150 GB SSD hard drive, 1 TB hard drive (5400 rpm).
    I am currently running Windows 8.1 Home Premium SP1 (64-bit).

    You're very welcome.
    I am not a PC repair tech by trade or training.
    Other than the replacement motherboard, and fan and heatsink combination, I wouldn't know if any other parts are required.
    The parts you need are listed in chapter 3 of the service manual with the part numbers.
    I also don't know if the boards come with the windows 8 product key included in the BIOS.
    There may be multiple motherboards listed, so make sure you get the right one.
    Same for the fan and heatsink.

  • Is it possible to upgrade the graphics card with my HP Envy DV7 - 7332EA

    Hi all,
    I was hoping someone on here may be able to answer my question. I recently purchased a refurbished laptop from certain computer retailer, an HP Envy DV7-7332ea, it is an Intel i7, 16GB RAM and was supposed to come with a 2GB Nvidia GT635M. Long story short, said pc retailer did not tell me that the fault/refurbishment was with the graphics card and despite advertising it as being installed with the GT635M, it in fact had a shared Intel graphics card installed. Long story short after some truly horrific customer service - talking to my bedroom wall would have yielded the same level of responses - they have told me that the will not be fitting the correct graphics card - when pressed for an explanation or reason for this they have been unable to give me a technical explanation.
    So, I'm assuming possibly the motherboard has been replaced as well which is preventing the graphics card from being upgraded. Now I realise that there could be numerous reasons this has happened, but I was hoping someone could answer me this.
    Would the artchitecture of my laptop allow for a graphics card upgrade? If the motherboard has problems and these were resolved are the Envy range generally able to be upgraded?
    Thanks guys,

    Hi:
    Unfortunately, the only way to upgrade the graphics adapter is to replace the motherboard with one that has the better nVidia GPU.
    Doing that would cost about as much as buying a new notebook with the graphics solution you wanted in the first place.

  • Envy dv7-7354er

    HP Envy dv7-7354er D2F85EA
    I am far from any service center and need help. When I try to turn on the laptop the power led blinks and fun starts for a second synchronously. Nothing appears on display. In the evening I closed cover ant it was going sleep normally. In the morning I saw HP logo blinking.
    I tested HDD, memory, battery, power adapter. Tried hard reset. No possibility to test motherboard, processor or video. How can I figure out with the falure and how to recover the laptop?

    Hello rvozgov, welcome to the HP Forums.
    I understand that you're having an issue with your notebook, that you've tried some self troubleshooting including testing for hardware failures. Based on the fact that you found nothing wrong in what was tested, but the issue remains. It is more then likely hardware, in what you weren't able to test.
    For this I recommend contacting support for best assistance, to see what they can do for you or options available in terms of repair/replacement.
    HP Technical Support, North America 1-800-474-6836. For all other regions click here.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • ENVY dv7 - Beeping laptop

    Hello,
    I happen to have a problem with my laptop which is an Envy dv7 running on Windows 8.1 x64.
    Lately, I can hear a weird beeping noise while I am using it, even though the sound is disabled. The beeping noise seems to occur randomly .
    Since I have no idea on what is causing this issue, I do not really know what to do about it.
    Do you have any clues on what is going on with my laptop and how I could possibly fix it?
    Thank you in advance, 
    Mab 

    The most common problems that cause beeping sounds are:
    Memory and heat-related failures caused by a build-up of dust in critical cooling areas
    A keyboard key is stuck
    A memory DIMM or hard drive cable is not seated properly
    A component on the motherboard has failed
    A basic computer function was unable to start
    Try:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03463381
    or
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01443317
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • NVIDIA driver not working on HP envy dv7

    Hi,
    i trying to install nvidia official driver to my HP envy dv7 laptop.
    Two wasted nights without success.
    I trying newest version from nvidia.com and from pacman.
    Result is same in both cases - black screen, high cpu temperatures, no video output.
    Pasted logs are from pacman version.
    Thank you for help !
    uname -a :
    $ uname -a
    Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
    lspci | grep VGA
    $ lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
    modinfo nvidia
    $modinfo nvidia
    filename: /lib/modules/3.13.5-1-ARCH/extramodules/nvidia.ko.gz
    alias: char-major-195-*
    version: 331.38
    supported: external
    license: NVIDIA
    alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
    alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
    alias: pci:v000010DEd*sv*sd*bc03sc02i00*
    alias: pci:v000010DEd*sv*sd*bc03sc00i00*
    depends: drm,i2c-core
    vermagic: 3.13.0-1-ARCH SMP preempt mod_unload modversions
    parm: NVreg_Mobile:int
    parm: NVreg_ResmanDebugLevel:int
    parm: NVreg_RmLogonRC:int
    parm: NVreg_ModifyDeviceFiles:int
    parm: NVreg_DeviceFileUID:int
    parm: NVreg_DeviceFileGID:int
    parm: NVreg_DeviceFileMode:int
    parm: NVreg_RemapLimit:int
    parm: NVreg_UpdateMemoryTypes:int
    parm: NVreg_InitializeSystemMemoryAllocations:int
    parm: NVreg_RMEdgeIntrCheck:int
    parm: NVreg_UsePageAttributeTable:int
    parm: NVreg_MapRegistersEarly:int
    parm: NVreg_RegisterForACPIEvents:int
    parm: NVreg_CheckPCIConfigSpace:int
    parm: NVreg_EnablePCIeGen3:int
    parm: NVreg_EnableMSI:int
    parm: NVreg_MemoryPoolSize:int
    parm: NVreg_RegistryDwords:charp
    parm: NVreg_RmMsg:charp
    parm: NVreg_AssignGpus:charp
    pacman -Qi nvidia
    $pacman -Qi nvidia
    Name : nvidia
    Version : 331.38-3
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.13 linux<3.14 nvidia-libgl nvidia-utils=331.38
    Optional Deps : None
    Required By : None
    Optional For : bumblebee
    Conflicts With : nvidia-96xx nvidia-173xx
    Replaces : None
    Installed Size : 4642.00 KiB
    Packager : Thomas Bächler <[email protected]>
    Build Date : Sun 26 Jan 2014 10:22:40 AM UTC
    Install Date : Wed 26 Feb 2014 05:45:32 PM UTC
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    nvidia-xconfig --query-gpu-info
    $nvidia-xconfig --query-gpu-info
    Number of GPUs: 1
    GPU #0:
    Name : GeForce GT 630M
    UUID : GPU-172f9afb-954f-a30c-b9e1-016f89943947
    PCI BusID : PCI:1:0:0
    Number of Display Devices: 1
    Display Device 0 (CRT-0):
    No EDID information available.
    xorg.0.log
    [ 2028.379]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 2028.394] X Protocol Version 11, Revision 0
    [ 2028.399] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 2028.407] Current Operating System: Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
    [ 2028.407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 2028.423] Build Date: 09 January 2014 08:47:24AM
    [ 2028.431]
    [ 2028.439] Current version of pixman: 0.32.4
    [ 2028.456] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2028.456] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2028.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 26 18:29:34 2014
    [ 2028.510] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2028.522] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2028.535] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2028.548] (==) ServerLayout "Layout0"
    [ 2028.561] (**) |-->Screen "Screen0" (0)
    [ 2028.574] (**) | |-->Monitor "Monitor0"
    [ 2028.587] (**) | |-->Device "Device0"
    [ 2028.601] (**) |-->Input Device "Keyboard0"
    [ 2028.615] (**) |-->Input Device "Mouse0"
    [ 2028.629] (==) Automatically adding devices
    [ 2028.643] (==) Automatically enabling devices
    [ 2028.658] (==) Automatically adding GPU devices
    [ 2028.673] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2028.688] Entry deleted from font path.
    [ 2028.704] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2028.721] Entry deleted from font path.
    [ 2028.738] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2028.756] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2028.774] Entry deleted from font path.
    [ 2028.792] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2028.869] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 2028.889] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2028.910] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 2028.931] (WW) Disabling Keyboard0
    [ 2028.952] (WW) Disabling Mouse0
    [ 2028.974] (II) Loader magic: 0x804c80
    [ 2028.995] (II) Module ABI versions:
    [ 2029.017] X.Org ANSI C Emulation: 0.4
    [ 2029.039] X.Org Video Driver: 15.0
    [ 2029.062] X.Org XInput driver : 20.0
    [ 2029.084] X.Org Server Extension : 8.0
    [ 2029.107] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2029.109] (--) PCI:*(0:0:2:0) 8086:0166:103c:181d rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
    [ 2029.134] (--) PCI: (0:1:0:0) 10de:0de9:103c:181d rev 161, Mem @ 0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 2029.186] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 2029.213] Initializing built-in extension Generic Event Extension
    [ 2029.240] Initializing built-in extension SHAPE
    [ 2029.267] Initializing built-in extension MIT-SHM
    [ 2029.295] Initializing built-in extension XInputExtension
    [ 2029.322] Initializing built-in extension XTEST
    [ 2029.349] Initializing built-in extension BIG-REQUESTS
    [ 2029.377] Initializing built-in extension SYNC
    [ 2029.404] Initializing built-in extension XKEYBOARD
    [ 2029.432] Initializing built-in extension XC-MISC
    [ 2029.459] Initializing built-in extension SECURITY
    [ 2029.486] Initializing built-in extension XINERAMA
    [ 2029.512] Initializing built-in extension XFIXES
    [ 2029.538] Initializing built-in extension RENDER
    [ 2029.564] Initializing built-in extension RANDR
    [ 2029.589] Initializing built-in extension COMPOSITE
    [ 2029.615] Initializing built-in extension DAMAGE
    [ 2029.640] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2029.665] Initializing built-in extension DOUBLE-BUFFER
    [ 2029.688] Initializing built-in extension RECORD
    [ 2029.711] Initializing built-in extension DPMS
    [ 2029.734] Initializing built-in extension Present
    [ 2029.756] Initializing built-in extension DRI3
    [ 2029.778] Initializing built-in extension X-Resource
    [ 2029.800] Initializing built-in extension XVideo
    [ 2029.821] Initializing built-in extension XVideo-MotionCompensation
    [ 2029.842] Initializing built-in extension XFree86-VidModeExtension
    [ 2029.863] Initializing built-in extension XFree86-DGA
    [ 2029.883] Initializing built-in extension XFree86-DRI
    [ 2029.903] Initializing built-in extension DRI2
    [ 2029.923] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 2029.923] (II) LoadModule: "glx"
    [ 2029.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2029.993] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2029.993] compiled for 4.0.2, module version = 1.0.0
    [ 2030.034] Module class: X.Org Server Extension
    [ 2030.055] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
    [ 2030.076] Loading extension GLX
    [ 2030.077] (II) LoadModule: "nvidia"
    [ 2030.120] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2030.142] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2030.142] compiled for 4.0.2, module version = 1.0.0
    [ 2030.185] Module class: X.Org Video Driver
    [ 2030.207] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
    [ 2030.229] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2030.251] (II) NVIDIA X compatibility module for ABI 15.0 built from xorg-server-1.14.99.901
    [ 2030.273] (II) X log verbosity: 5
    [ 2030.315] (--) using VT number 1
    [ 2030.462] (II) Loading sub module "fb"
    [ 2030.462] (II) LoadModule: "fb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2030.462] (II) Module fb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 2030.462] (II) Loading sub module "wfb"
    [ 2030.462] (II) LoadModule: "wfb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2030.462] (II) Module wfb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (II) Loading sub module "ramdac"
    [ 2030.462] (II) LoadModule: "ramdac"
    [ 2030.462] (II) Module "ramdac" already built-in
    [ 2030.462] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 2030.462] (==) NVIDIA(0): RGB weight 888
    [ 2030.462] (==) NVIDIA(0): Default visual is TrueColor
    [ 2030.463] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2030.463] (==) NVIDIA(0): Using HW cursor
    [ 2030.463] (==) NVIDIA(0): Video key set to default value of 0x101fe
    [ 2030.463] (==) NVIDIA(0): Not mapping the primary surface by default.
    [ 2030.463] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
    [ 2030.463] (**) NVIDIA(0): Enabling 2D acceleration
    [ 2030.463] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
    [ 2030.588] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
    [ 2030.588] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 2030.589] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
    [ 2030.589] (II) NVIDIA(0): GPU UUID: GPU-172f9afb-954f-a30c-b9e1-016f89943947
    [ 2030.589] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 2030.589] (II) NVIDIA(0): Board ID: 0xce4e
    [ 2030.589] (II) NVIDIA(0): Chip SKU: 770
    [ 2030.589] (II) NVIDIA(0): Chip SKU Mod: 1
    [ 2030.589] (II) NVIDIA(0): Project: 1303
    [ 2030.589] (II) NVIDIA(0): Project SKU: 0000
    [ 2030.589] (II) NVIDIA(0): GPU RAM Type: DDR3
    [ 2030.589] (--) NVIDIA(0): VideoBIOS: 70.08.b9.00.0b
    [ 2030.589] (--) NVIDIA(0): Found 2 heads on board
    [ 2030.589] (II) NVIDIA(0): Supported display device(s): CRT-0
    [ 2030.589] (II) NVIDIA(0): Bus detected as PCI Express
    [ 2030.589] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 2030.589] (II) NVIDIA(0): SPS : 1
    [ 2030.589] (II) NVIDIA(0): User configuration of GPU PowerMizer is supported
    [ 2030.589] (II) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
    [ 2030.591] (--) NVIDIA(0): CRT-0 (boot, connected)
    [ 2030.591] (--) NVIDIA(0): CRT-0 Name Aliases:
    [ 2030.591] (--) NVIDIA(0): CRT
    [ 2030.591] (--) NVIDIA(0): CRT-0
    [ 2030.591] (--) NVIDIA(0): DPY-0
    [ 2030.591] (--) NVIDIA(0): VGA-0
    [ 2030.591] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): No EDID Available.
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- End of EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2030.591] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2030.591] (**) NVIDIA(0): all display devices.)
    [ 2030.591] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2030.591] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2030.591] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2030.591] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2030.591] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2030.593] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(0): Display device(s) assigned to X screen 0:
    [ 2030.593] (II) NVIDIA(0): CRT-0
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 2030.593] (==) NVIDIA(0): will be used as the requested mode.
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (II) NVIDIA(0): Requested modes:
    [ 2030.593] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Validated MetaModes:
    [ 2030.593] (II) NVIDIA(0): MetaMode "CRT-0:nvidia-auto-select":
    [ 2030.593] (II) NVIDIA(0): Size: 1024 x 768
    [ 2030.593] (II) NVIDIA(0): CRT-0: "nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Size : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Offset : +0 +0
    [ 2030.593] (II) NVIDIA(0): Panning
    [ 2030.593] (II) NVIDIA(0): Domain : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Tracking Area: 1024 x 768 +0 +0
    [ 2030.593] (II) NVIDIA(0): Border : 0,0,0,0
    [ 2030.593] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_60"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_56"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 640x480"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 512x384"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 400x300"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 320x240"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: nvidia-auto-select { ViewPortIn = 1024 x 576, ViewPortOut = 1024 x 576 + 0 + 96 }"
    [ 2030.596] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [ 2030.596] (WW) NVIDIA(0): from CRT-0's EDID.
    [ 2030.596] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 2030.596] (--) Depth 24 pixmap format is 32 bpp
    [ 2030.597] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 2030.597] (II) NVIDIA: access.
    [ 2030.599] (II) NVIDIA(0): kernel module enabled successfully
    [ 2030.599] (II) NVIDIA(0): GPU initialized
    [ 2030.599] (II) NVIDIA(0): ACPI: AC state file path: /sys/class/power_supply/ADP1/online
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is running on battery power
    [ 2030.599] (II) NVIDIA(0): ACPI: dock file path: /sys/devices/platform//dock.0/docked
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is undocked
    [ 2030.599] (II) NVIDIA(0): Registered for mobile display change hotkey events.
    [ 2030.602] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 2030.619] (II) NVIDIA(0): First mode initialized
    [ 2030.624] (==) NVIDIA(0): Using 8388608 bytes for software rendering cache
    [ 2030.629] (II) NVIDIA(0): Using built-in logo image.
    [ 2030.629] (II) NVIDIA(0): Logo is 744x537 with depth 24.
    [ 2030.641] Loading extension NV-GLX
    [ 2030.689] (II) NVIDIA(0): Initialized OpenGL Acceleration
    [ 2030.689] (II) NVIDIA(0): Visuals set up
    [ 2030.689] (II) NVIDIA(0): Pixmap depths set up
    [ 2030.690] (II) NVIDIA(0): GLX visuals set up
    [ 2030.690] (II) NVIDIA(0): Framebuffer set up
    [ 2030.690] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 2030.690] (II) NVIDIA(0): Initialized X Rendering Acceleration
    [ 2030.690] (==) NVIDIA(0): Backing store enabled
    [ 2030.690] (==) NVIDIA(0): Silken mouse enabled
    [ 2030.690] (II) NVIDIA(0): Default colormap initialized.
    [ 2030.690] (II) NVIDIA(0): Palette loaded
    [ 2030.690] (**) NVIDIA(0): DPMS enabled
    [ 2030.690] Loading extension NV-CONTROL
    [ 2030.690] Loading extension XINERAMA
    [ 2030.690] (II) NVIDIA(0): Loading NVIDIA Xinerama information
    [ 2030.690] (II) Loading sub module "dri2"
    [ 2030.690] (II) LoadModule: "dri2"
    [ 2030.690] (II) Module "dri2" already built-in
    [ 2030.690] (II) NVIDIA(0): [DRI2] Setup complete
    [ 2030.690] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 2030.690] (II) NVIDIA(0): Screen initialization complete
    [ 2030.690] (--) RandR disabled
    [ 2030.695] (II) Initializing extension GLX
    [ 2030.726] (II) XKB: Reusing cached keymap
    [ 2030.728] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2030.728] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2030.728] (II) LoadModule: "evdev"
    [ 2030.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2030.728] (II) Module evdev: vendor="X.Org Foundation"
    [ 2030.728] compiled for 1.15.0, module version = 2.8.2
    [ 2030.728] Module class: X.Org XInput Driver
    [ 2030.728] ABI class: X.Org XInput driver, version 20.0
    [ 2030.728] (II) Using input driver 'evdev' for 'Power Button'
    [ 2030.728] Option "XkbRules" "evdev"
    [ 2030.728] Option "XkbModel" "pc104"
    [ 2030.728] Option "XkbLayout" "us"
    [ 2030.728] Option "_source" "server/udev"
    [ 2030.728] Option "name" "Power Button"
    [ 2030.728] Option "path" "/dev/input/event2"
    [ 2030.728] Option "device" "/dev/input/event2"
    [ 2030.728] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.728] Option "driver" "evdev"
    [ 2030.728] (**) Power Button: always reports core events
    [ 2030.728] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2030.729] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2030.729] (--) evdev: Power Button: Found keys
    [ 2030.729] (II) evdev: Power Button: Configuring as keyboard
    [ 2030.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2030.729] (**) Option "xkb_rules" "evdev"
    [ 2030.729] (**) Option "xkb_model" "pc104"
    [ 2030.729] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2030.748] (II) No input driver specified, ignoring this device.
    [ 2030.748] (II) This device may have been added with another device file.
    [ 2030.748] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 2030.748] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event7)
    [ 2030.748] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
    [ 2030.748] (II) Using input driver 'evdev' for 'HP Truevision HD'
    [ 2030.748] Option "XkbRules" "evdev"
    [ 2030.748] Option "XkbModel" "pc104"
    [ 2030.748] Option "XkbLayout" "us"
    [ 2030.748] Option "_source" "server/udev"
    [ 2030.748] Option "name" "HP Truevision HD"
    [ 2030.748] Option "path" "/dev/input/event7"
    [ 2030.748] Option "device" "/dev/input/event7"
    [ 2030.748] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] Option "driver" "evdev"
    [ 2030.748] (**) HP Truevision HD: always reports core events
    [ 2030.748] (**) evdev: HP Truevision HD: Device: "/dev/input/event7"
    [ 2030.748] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x33a
    [ 2030.748] (--) evdev: HP Truevision HD: Found keys
    [ 2030.748] (II) evdev: HP Truevision HD: Configuring as keyboard
    [ 2030.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 7)
    [ 2030.748] (**) Option "xkb_rules" "evdev"
    [ 2030.748] (**) Option "xkb_model" "pc104"
    [ 2030.748] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) XKB: Reusing cached keymap
    [ 2030.749] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2030.750] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "AT Translated Set 2 keyboard"
    [ 2030.750] Option "path" "/dev/input/event0"
    [ 2030.750] Option "device" "/dev/input/event0"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2030.750] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2030.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2030.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [ 2030.750] (**) Option "xkb_rules" "evdev"
    [ 2030.750] (**) Option "xkb_model" "pc104"
    [ 2030.750] (**) Option "xkb_layout" "us"
    [ 2030.750] (II) XKB: Reusing cached keymap
    [ 2030.750] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "SynPS/2 Synaptics TouchPad"
    [ 2030.750] Option "path" "/dev/input/event10"
    [ 2030.750] Option "device" "/dev/input/event10"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2030.750] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
    [ 2030.750] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 2030.751] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2030.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.751] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 9)
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2030.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.752] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
    [ 2030.752] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2030.752] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 2030.752] Option "XkbRules" "evdev"
    [ 2030.752] Option "XkbModel" "pc104"
    [ 2030.752] Option "XkbLayout" "us"
    [ 2030.752] Option "_source" "server/udev"
    [ 2030.752] Option "name" "HP WMI hotkeys"
    [ 2030.752] Option "path" "/dev/input/event9"
    [ 2030.752] Option "device" "/dev/input/event9"
    [ 2030.752] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] Option "driver" "evdev"
    [ 2030.752] (**) HP WMI hotkeys: always reports core events
    [ 2030.752] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
    [ 2030.752] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 2030.752] (--) evdev: HP WMI hotkeys: Found keys
    [ 2030.752] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 2030.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
    [ 2030.752] (**) Option "xkb_rules" "evdev"
    [ 2030.752] (**) Option "xkb_model" "pc104"
    [ 2030.752] (**) Option "xkb_layout" "us"
    [ 2030.752] (II) XKB: Reusing cached keymap
    [ 2031.256] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.256] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.256] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.256] (**) NVIDIA(0): all display devices.)
    [ 2031.256] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.256] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.256] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.256] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.256] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.257] (II) NVIDIA(GPU-0):
    [ 2031.257] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.257] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.258] (II) NVIDIA(GPU-0):
    [ 2031.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.506] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.506] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.506] (**) NVIDIA(0): all display devices.)
    [ 2031.506] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.506] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.506] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.506] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.506] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2031.509] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.509] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2046.582] (II) evdev: HP WMI hotkeys: Close
    [ 2046.582] (II) UnloadModule: "evdev"
    [ 2046.623] (II) evdev: SynPS/2 Synaptics TouchPad: Close
    [ 2046.623] (II) UnloadModule: "evdev"
    [ 2046.663] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2046.663] (II) UnloadModule: "evdev"
    [ 2046.702] (II) evdev: HP Truevision HD: Close
    [ 2046.702] (II) UnloadModule: "evdev"
    [ 2046.741] (II) evdev: Power Button: Close
    [ 2046.741] (II) UnloadModule: "evdev"
    [ 2046.794] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 2046.795] (EE) Server terminated successfully (0). Closing log file.
    xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
    Section "Module"
    Load "glx"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    # VendorName "Unknown"
    # ModelName "Unknown"
    # HorizSync 28.0 - 33.0
    # VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0"
    # Option "UseEDID" "true"
    Option "ConnectedMonitor" "DFP-0"
    # Option "CustomEDID" "CRT-0:/etc/X11/1280x1024.bin"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection

    dmesg :
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a3befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ENVY dv7 Notebook PC/181D, BIOS F.12 09/03/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25F600000 mask FFFE00000 uncachable
    [ 0.000000] 8 base 25F800000 mask FFF800000 uncachable
    [ 0.000000] 9 base 260000000 mask FE0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
    [ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
    [ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
    [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x9a3befff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x9a1fffff] page 2M
    [ 0.000000] [mem 0x9a200000-0x9a3befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
    [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379b0000-0x37ccffff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009affe210 0000A4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
    [ 0.000000] ACPI: FACP 000000009affb000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: DSDT 000000009afe4000 0130E0 (v01 HPQOEM 181D 00000000 ACPI 00040000)
    [ 0.000000] ACPI: FACS 000000009afb8000 000040
    [ 0.000000] ACPI: UEFI 000000009affd000 000236 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASF! 000000009affc000 0000A5 (v32 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: HPET 000000009affa000 000038 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: APIC 000000009aff9000 00008C (v03 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MCFG 000000009aff8000 00003C (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: WDAT 000000009afe3000 000224 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afe1000 001068 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 000000009afdf000 000028 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASPT 000000009afdd000 000034 (v07 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: DBGP 000000009afdc000 000034 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: FPDT 000000009afda000 000044 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MSDM 000000009afd9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd8000 000926 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd7000 000A92 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd3000 002E84 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
    [ 0.000000] NODE_DATA [mem 0x25f5f3000-0x25f5f7fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x9a3befff]
    [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
    [ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
    [ 0.000000] On node 0 totalpages: 2070351
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9799 pages used for memmap
    [ 0.000000] DMA32 zone: 627135 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22488 pages used for memmap
    [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9a3bf000-0x9aebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037979
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8068224K/8281404K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 213180K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.589 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.72 BogoMIPS (lpj=7981963)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000029] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000030] Yama: becoming mindful.
    [ 0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.001940] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.002614] Mount-cache hash table entries: 256
    [ 0.002739] Initializing cgroup subsys memory
    [ 0.002743] Initializing cgroup subsys devices
    [ 0.002744] Initializing cgroup subsys freezer
    [ 0.002746] Initializing cgroup subsys net_cls
    [ 0.002747] Initializing cgroup subsys blkio
    [ 0.002763] CPU: Physical Processor ID: 0
    [ 0.002764] CPU: Processor Core ID: 0
    [ 0.002768] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003048] mce: CPU supports 9 MCE banks
    [ 0.003058] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003064] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 2
    [ 0.003142] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.003906] ACPI: Core revision 20131115
    [ 0.009053] ACPI: All ACPI Tables successfully acquired
    [ 0.053822] ftrace: allocating 21057 entries in 83 pages
    [ 0.061910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.094942] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.094948] TSC deadline timer enabled
    [ 0.094955] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.094960] ... version: 3
    [ 0.094960] ... bit width: 48
    [ 0.094961] ... generic registers: 4
    [ 0.094962] ... value mask: 0000ffffffffffff
    [ 0.094962] ... max period: 0000ffffffffffff
    [ 0.094963] ... fixed-purpose events: 3
    [ 0.094964] ... event mask: 000000070000000f
    [ 0.121742] x86: Booting SMP configuration:
    [ 0.135256] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.121746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.256907] x86: Booted up 1 node, 8 CPUs
    [ 0.256909] smpboot: Total of 8 processors activated (38328.81 BogoMIPS)
    [ 0.262487] devtmpfs: initialized
    [ 0.264464] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
    [ 0.265037] RTC time: 21:55:49, date: 02/28/14
    [ 0.265063] NET: Registered protocol family 16
    [ 0.265128] cpuidle: using governor ladder
    [ 0.265129] cpuidle: using governor menu
    [ 0.265147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.265148] ACPI: bus type PCI registered
    [ 0.265150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.265197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.265199] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.282064] PCI: Using configuration type 1 for base access
    [ 0.282527] bio: create slab <bio-0> at 0
    [ 0.282615] ACPI: Added _OSI(Module Device)
    [ 0.282616] ACPI: Added _OSI(Processor Device)
    [ 0.282617] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.282618] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.285086] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.312765] ACPI Error: No handler for Region [RAM_] (ffff880253874090) [EmbeddedControl] (20131115/evregion-162)
    [ 0.312767] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
    [ 0.312770] ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/psparse-536)
    [ 0.312774] ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/uteval-103)
    [ 0.313004] ACPI: SSDT 000000009ae3a018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.313310] ACPI: Dynamic OEM Table Load:
    [ 0.313311] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.325950] ACPI: SSDT 000000009aeada98 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.326272] ACPI: Dynamic OEM Table Load:
    [ 0.326273] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.339208] ACPI: SSDT 000000009ababd98 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 0.339508] ACPI: Dynamic OEM Table Load:
    [ 0.339509] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 1.238575] ACPI: Interpreter enabled
    [ 1.238580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 1.238584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 1.238594] ACPI: (supports S0 S3 S4 S5)
    [ 1.238595] ACPI: Using IOAPIC for interrupt routing
    [ 1.238612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.238799] ACPI: ACPI Dock Station Driver: 1 docks/bays found
    [ 1.260983] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
    [ 1.321167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 1.321171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.321214] \_SB_.PCI0:_OSC invalid UUID
    [ 1.321215] _OSC request data:1 1f 0
    [ 1.321218] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 1.321676] PCI host bridge to bus 0000:00
    [ 1.321678] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 1.321679] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.321680] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.321682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.321683] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 1.321688] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 1.321749] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 1.321772] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.321801] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.321826] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 1.321834] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
    [ 1.321839] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.321842] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 1.321916] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 1.321936] pci 0000:00:14.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit]
    [ 1.322002] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.322033] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.322061] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 1.322083] pci 0000:00:16.0: reg 0x10: [mem 0xd4614000-0xd461400f 64bit]
    [ 1.322154] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.322218] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 1.322238] pci 0000:00:1a.0: reg 0x10: [mem 0xd4619000-0xd46193ff]
    [ 1.322321] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.322363] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.322390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 1.322404] pci 0000:00:1b.0: reg 0x10: [mem 0xd4610000-0xd4613fff 64bit]
    [ 1.322466] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.322498] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.322527] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 1.322652] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.322697] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.322726] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 1.322855] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.322900] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.322929] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 1.323056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.323100] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.323125] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
    [ 1.323197] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.323232] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 1.323263] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 1.323282] pci 0000:00:1d.0: reg 0x10: [mem 0xd4618000-0xd46183ff]
    [ 1.323366] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.323407] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.323434] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 1.323584] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.323601] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 1.323608] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 1.323615] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 1.323623] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 1.323630] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 1.323637] pci 0000:00:1f.2: reg 0x24: [mem 0xd4617000-0xd46177ff]
    [ 1.323678] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.323727] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 1.323741] pci 0000:00:1f.3: reg 0x10: [mem 0xd4615000-0xd46150ff 64bit]
    [ 1.323760] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
    [ 1.323853] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
    [ 1.323862] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
    [ 1.323869] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.323875] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [ 1.323880] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
    [ 1.323884] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 1.323917] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.330552] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.330557] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.330562] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.330568] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.330681] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.330867] pci 0000:08:00.0: [10ec:5229] type 00 class 0xff0000
    [ 1.330931] pci 0000:08:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
    [ 1.331423] pci 0000:08:00.0: supports D1 D2
    [ 1.331424] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
    [ 1.331502] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 1.337279] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.337286] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.337294] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.337304] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.337465] pci 0000:0a:00.0: [8086:0887] type 00 class 0x028000
    [ 1.337511] pci 0000:0a:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
    [ 1.337733] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
    [ 1.337776] pci 0000:0a:00.0: System wakeup disabled by ACPI
    [ 1.343946] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.343959] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.344076] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.344094] pci 0000:0b:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.344127] pci 0000:0b:00.0: reg 0x18: [mem 0xd4404000-0xd4404fff 64bit pref]
    [ 1.344147] pci 0000:0b:00.0: reg 0x20: [mem 0xd4400000-0xd4403fff 64bit pref]
    [ 1.344234] pci 0000:0b:00.0: supports D1 D2
    [ 1.344236] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.373952] pci 0000:0b:00.0: System wakeup disabled by ACPI
    [ 1.380639] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.380647] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.380654] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.381137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381174] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381209] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381278] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381313] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381348] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381384] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381615] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 1.381620] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.381661] Found 1 acpi root devices
    [ 1.381686] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.381736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.381739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.381740] vgaarb: loaded
    [ 1.381741] vgaarb: bridge control possible 0000:01:00.0
    [ 1.381741] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.381759] PCI: Using ACPI for IRQ routing
    [ 1.387711] PCI: pci_cache_line_size set to 64 bytes
    [ 1.387850] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
    [ 1.387851] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 1.387852] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
    [ 1.387853] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
    [ 1.387854] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
    [ 1.387910] NetLabel: Initializing
    [ 1.387911] NetLabel: domain hash size = 128
    [ 1.387912] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.387923] NetLabel: unlabeled traffic allowed by default
    [ 1.387936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.387940] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.389961] Switched to clocksource hpet
    [ 1.392856] pnp: PnP ACPI init
    [ 1.392865] ACPI: bus type PNP registered
    [ 1.392884] pnp 00:00: [dma 4]
    [ 1.392898] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.392912] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.392979] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.392999] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.393026] system 00:04: [io 0x1100-0x110f] has been reserved
    [ 1.393028] system 00:04: [io 0xffff] has been reserved
    [ 1.393029] system 00:04: [io 0xffff] has been reserved
    [ 1.393031] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 1.393032] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 1.393033] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.393035] system 00:04: [io 0x1200-0x1207] has been reserved
    [ 1.393036] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved
    [ 1.393038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393055] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.393085] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 1.393087] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.393126] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 1.393148] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5e SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.393228] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.393230] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.393231] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.393233] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.393234] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.393235] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.393237] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.393238] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.393239] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.393241] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
    [ 1.393242] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393419] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.393420] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.393422] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.393458] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.393478] pnp: PnP ACPI: found 12 devices
    [ 1.393479] ACPI: bus type PNP unregistered
    [ 1.399368] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 1.399417] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
    [ 1.399419] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.399420] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.399422] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.399424] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399427] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.399444] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.399447] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.399452] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.399456] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399465] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.399471] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.399482] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.399485] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.399489] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.399497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.399499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.399500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.399501] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
    [ 1.399502] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.399503] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd3ffffff]
    [ 1.399505] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399506] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
    [ 1.399507] pci_bus 0000:08: resource 1 [mem 0xd1000000-0xd1ffffff]
    [ 1.399508] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399510] pci_bus 0000:0a: resource 1 [mem 0xd4500000-0xd45fffff]
    [ 1.399511] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
    [ 1.399512] pci_bus 0000:0b: resource 1 [mem 0xd4400000-0xd44fffff]
    [ 1.399530] NET: Registered protocol family 2
    [ 1.399642] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 1.399750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.399849] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.399860] TCP: reno registered
    [ 1.399870] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399937] NET: Registered protocol family 1
    [ 1.399946] pci 0000:00:02.0: Boot video device
    [ 1.780500] PCI: CLS 64 bytes, default 64
    [ 1.780530] Unpacking initramfs...
    [ 1.820767] Freeing initrd memory: 3200K (ffff8800379b0000 - ffff880037cd0000)
    [ 1.820771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.820773] software IO TLB [mem 0x963bf000-0x9a3bf000] (64MB) mapped at [ffff8800963bf000-ffff88009a3befff]
    [ 1.820794] Simple Boot Flag at 0x44 set to 0x1
    [ 1.820989] Scanning for low memory corruption every 60 seconds
    [ 1.821175] audit: initializing netlink socket (disabled)
    [ 1.821183] type=2000 audit(1393624549.773:1): initialized
    [ 1.830154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.831019] zbud: loaded
    [ 1.831130] VFS: Disk quotas dquot_6.5.2
    [ 1.831155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.831254] msgmni has been set to 15764
    [ 1.831287] Key type big_key registered
    [ 1.831483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.831523] io scheduler noop registered
    [ 1.831524] io scheduler deadline registered
    [ 1.831539] io scheduler cfq registered (default)
    [ 1.831652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.832086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.832096] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.832122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 1.832123] vesafb: scrolling: redraw
    [ 1.832124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.832682] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
    [ 1.946268] Console: switching to colour frame buffer device 240x67
    [ 2.059378] fb0: VESA VGA frame buffer device
    [ 2.059386] intel_idle: MWAIT substates: 0x21120
    [ 2.059387] intel_idle: v0.4 model 0x3A
    [ 2.059387] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.059528] GHES: HEST is not enabled!
    [ 2.059562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.059853] Linux agpgart interface v0.103
    [ 2.059899] rtc_cmos 00:05: RTC can wake from S4
    [ 2.060005] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.060033] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 2.060039] Intel P-state driver initializing.
    [ 2.060046] Intel pstate controlling: cpu 0
    [ 2.060056] Intel pstate controlling: cpu 1
    [ 2.060066] Intel pstate controlling: cpu 2
    [ 2.060075] Intel pstate controlling: cpu 3
    [ 2.060081] Intel pstate controlling: cpu 4
    [ 2.060087] Intel pstate controlling: cpu 5
    [ 2.060094] Intel pstate controlling: cpu 6
    [ 2.060101] Intel pstate controlling: cpu 7
    [ 2.060170] drop_monitor: Initializing network drop monitor service
    [ 2.060205] TCP: cubic registered
    [ 2.060258] NET: Registered protocol family 10
    [ 2.060356] NET: Registered protocol family 17
    [ 2.060361] Key type dns_resolver registered
    [ 2.060562] registered taskstats version 1
    [ 2.061180] Magic number: 2:200:956
    [ 2.061210] memory memory9: hash matches
    [ 2.061260] rtc_cmos 00:05: setting system clock to 2014-02-28 21:55:50 UTC (1393624550)
    [ 2.061289] PM: Hibernation image not present or could not be loaded.
    [ 2.061821] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 2.061822] Write protecting the kernel read-only data: 8192k
    [ 2.063314] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
    [ 2.064187] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
    [ 2.070995] systemd-udevd[76]: starting version 208
    [ 2.081683] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.086896] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
    [ 2.086940] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
    [ 2.087062] ACPI: bus type USB registered
    [ 2.087089] usbcore: registered new interface driver usbfs
    [ 2.087162] usbcore: registered new interface driver hub
    [ 2.087210] usbcore: registered new device driver usb
    [ 2.087615] SCSI subsystem initialized
    [ 2.087789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.087987] ehci-pci: EHCI PCI platform driver
    [ 2.088114] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.088121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.088137] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.088526] libata version 3.00 loaded.
    [ 2.092034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.092051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4619000
    [ 2.103911] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.104041] hub 1-0:1.0: USB hub found
    [ 2.104046] hub 1-0:1.0: 2 ports detected
    [ 2.104210] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.104214] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.104225] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.107112] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.107123] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.108127] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.108140] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4618000
    [ 2.117274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.117508] hub 2-0:1.0: USB hub found
    [ 2.117514] hub 2-0:1.0: 2 ports detected
    [ 2.117750] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.117756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 2.117854] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 2.117873] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 2.118100] hub 3-0:1.0: USB hub found
    [ 2.118108] hub 3-0:1.0: 4 ports detected
    [ 2.118349] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.118351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 2.118452] hub 4-0:1.0: USB hub found
    [ 2.118462] hub 4-0:1.0: 4 ports detected
    [ 2.135939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.150760] ahci 0000:00:1f.2: version 3.0
    [ 2.150968] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 2.164071] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode
    [ 2.164079] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 2.171405] scsi0 : ahci
    [ 2.171666] scsi1 : ahci
    [ 2.171894] scsi2 : ahci
    [ 2.172116] scsi3 : ahci
    [ 2.172313] scsi4 : ahci
    [ 2.172447] scsi5 : ahci
    [ 2.172504] ata1: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617100 irq 43
    [ 2.172514] ata2: DUMMY
    [ 2.172516] ata3: DUMMY
    [ 2.172517] ata4: DUMMY
    [ 2.172519] ata5: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617300 irq 43
    [ 2.172520] ata6: DUMMY
    [ 2.410959] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.491002] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.491072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.502872] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
    [ 2.502878] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.506430] ata5.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
    [ 2.512780] ata1.00: configured for UDMA/133
    [ 2.513113] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
    [ 2.524950] ata5.00: configured for UDMA/100
    [ 2.531477] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
    [ 2.534925] hub 1-1:1.0: USB hub found
    [ 2.534975] hub 1-1:1.0: 6 ports detected
    [ 2.536606] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 2.536677] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.536680] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.536701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.537540] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
    [ 2.538190] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.542465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.542469] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.542686] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 2.608731] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.651327] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 2.651588] systemd[1]: No hostname configured.
    [ 2.651596] systemd[1]: Set hostname to <localhost>.
    [ 2.653530] random: systemd urandom read with 42 bits of entropy available
    [ 2.657173] systemd-fstab-generator[151]: Checking was requested for "nas:/mnt/HD/HD_a2/STORE01", but it is not a device.
    [ 2.687501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 2.687558] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 2.687572] systemd[1]: Starting Login Prompts.
    [ 2.687585] systemd[1]: Reached target Login Prompts.
    [ 2.687595] systemd[1]: Starting Remote File Systems.
    [ 2.687605] systemd[1]: Reached target Remote File Systems.
    [ 2.687615] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 2.687642] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 2.687652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 2.687669] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 2.687679] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 2.687712] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 2.687722] systemd[1]: Starting Delayed Shutdown Socket.
    [ 2.687759] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 2.687772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 2.687812] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 2.687822] systemd[1]: Starting Paths.
    [ 2.687832] systemd[1]: Reached target Paths.
    [ 2.687842] systemd[1]: Starting Journal Socket.
    [ 2.687878] systemd[1]: Listening on Journal Socket.
    [ 2.687895] systemd[1]: Mounting Debug File System...
    [ 2.688266] systemd[1]: Starting Journal Service...
    [ 2.688521] systemd[1]: Started Journal Service.
    [ 2.694471] usb 3-3: new full-speed USB device number 2 using xhci_hcd
    [ 2.702863] systemd-journald[157]: Vacuuming done, freed 0 bytes
    [ 2.708483] FS-Cache: Loaded
    [ 2.710845] usb 3-3: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.713390] RPC: Registered named UNIX socket transport module.
    [ 2.713392] RPC: Registered udp transport module.
    [ 2.713393] RPC: Registered tcp transport module.
    [ 2.713394] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 2.718880] FS-Cache: Netfs 'nfs' registered for caching
    [ 2.728296] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 2.741906] systemd-udevd[202]: starting version 208
    [ 2.779466] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 2.780942] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 2.780948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780952] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780955] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780958] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780963] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780966] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780969] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780971] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780973] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.782830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 2.785766] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 2.791210] ACPI: Lid Switch [LID0]
    [ 2.791504] [drm] Initialized drm 1.1.0 20060810
    [ 2.791605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 2.791609] ACPI: Power Button [PWRF]
    [ 2.792665] wmi: Mapper loaded
    [ 2.792681] hp_accel: laptop model unknown, using default axes configuration
    [ 2.797256] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 2.802959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.802966] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.803223] r8169 0000:0b:00.0: irq 46 for MSI/MSI-X
    [ 2.803494] r8169 0000:0b:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011eee000, a0:b3:cc:4b:1a:7e, XID 0c900800 IRQ 46
    [ 2.803496] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.811332] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.815328] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 2.816642] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.816644] Copyright(c) 2003-2013 Intel Corporation
    [ 2.816736] iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.816860] iwlwifi 0000:0a:00.0: irq 47 for MSI/MSI-X
    [ 2.817888] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 2.818258] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.818636] platform microcode: Direct firmware load failed with error -2
    [ 2.818639] platform microcode: Falling back to user helper
    [ 2.821802] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 2.824537] tsc: Refined TSC clocksource calibration: 2394.561 MHz
    [ 2.826546] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.828014] usbcore: registered new interface driver usbhid
    [ 2.828016] usbhid: USB HID core driver
    [ 2.832266] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 2.832334] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.832373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.832658] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
    [ 2.832662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.834846] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.834848] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.834850] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.834851] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
    [ 2.834955] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 2.835666] usbcore: registered new interface driver snd-usb-audio
    [ 2.854044] iTCO_vendor_support: vendor-support=0
    [ 2.854466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.854514] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.854638] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.856761] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.860498] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.860514] platform microcode: Direct firmware load failed with error -2
    [ 2.860516] platform microcode: Falling back to user helper
    [ 2.863566] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.3/input/input10
    [ 2.863734] hid-generic 0003:08BB:2902.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-3/input3
    [ 2.867484] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.867498] platform microcode: Direct firmware load failed with error -2
    [ 2.867500] platform microcode: Falling back to user helper
    [ 2.870088] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870100] platform microcode: Direct firmware load failed with error -2
    [ 2.870102] platform microcode: Falling back to user helper
    [ 2.870542] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870561] platform microcode: Direct firmware load failed with error -2
    [ 2.870563] platform microcode: Falling back to user helper
    [ 2.871275] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871285] platform microcode: Direct firmware load failed with error -2
    [ 2.871288] platform microcode: Falling back to user helper
    [ 2.871938] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871949] platform microcode: Direct firmware load failed with error -2
    [ 2.871952] platform microcode: Falling back to user helper
    [ 2.872242] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.872254] platform microcode: Direct firmware load failed with error -2
    [ 2.872257] platform microcode: Falling back to user helper
    [ 2.872575] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.878423] systemd-udevd[206]: renamed network interface eth0 to eno1
    [ 2.881987] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 2.890802] systemd-journald[157]: Received request to flush runtime journal from PID 1
    [ 2.901323] systemd-udevd[217]: renamed network interface wlan0 to wlo1
    [ 2.908030] ACPI: AC Adapter [ADP1] (on-line)
    [ 2.941825] hub 2-1:1.0: USB hub found
    [ 2.941930] hub 2-1:1.0: 8 ports detected
    [ 3.021509] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 3.061674] intel_rapl: domain uncore energy ctr 8617:8617 not working, skip
    [ 3.074806] lis3lv02d: 8 bits 3DC sensor found
    [ 3.135241] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.142912] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.171642] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3.233041] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.233045] Disabling lock debugging due to kernel taint
    [ 3.238226] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
    [ 3.238279] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.238457] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    [ 3.238462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
    [ 3.356112] media: Linux media interface: v0.10
    [ 3.360422] Linux video capture interface: v2.00
    [ 3.365597] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:033a)
    [ 3.377291] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
    [ 3.377488] usbcore: registered new interface driver uvcvideo
    [ 3.377494] USB Video Class driver (1.1.1)
    [ 3.393157] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.400907] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.425257] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
    [ 3.458983] input: HP WMI hotkeys as /devices/virtual/input/input9
    [ 3.473371] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 3.521478] Bluetooth: Core ver 2.17
    [ 3.521492] NET: Registered protocol family 31
    [ 3.521493] Bluetooth: HCI device and connection manager initialized
    [ 3.521499] Bluetooth: HCI socket layer initialized
    [ 3.521501] Bluetooth: L2CAP socket layer initialized
    [ 3.521505] Bluetooth: SCO socket layer initialized
    [ 3.523209] usbcore: registered new interface driver btusb
    [ 3.597251] r8169 0000:0b:00.0 eno1: link down
    [ 3.597286] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
    [ 3.825665] Switched to clocksource tsc
    [ 4.034513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2055, fw id: 1107424
    [ 4.062727] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
    [ 4.071722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071771] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071854] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071944] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.104186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
    [ 4.107557] mousedev: PS/2 mouse device common for all mice
    [ 4.326086] thermal LNXTHERM:00: registered as thermal_zone1
    [ 4.326092] ACPI: Thermal Zone [TZS0] (69 C)
    [ 4.606281] [Firmware Bug]: No valid trip found
    [ 5.280111] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
    [ 5.283560] random: nonblocking pool is initialized
    [ 5.694087] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.035020] thermal LNXTHERM:02: registered as thermal_zone2
    [ 7.035026] ACPI: Thermal Zone [TZS2] (57 C)
    [ 8.889924] thermal LNXTHERM:03: registered as thermal_zone3
    [ 8.889929] ACPI: Thermal Zone [TZS3] (30 C)
    [ 9.408442] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 10.251376] type=1006 audit(1393624558.679:2): pid=348 uid=0 old auid=4294967295 new auid=120 old ses=4294967295 new ses=1 res=1
    [ 11.338226] traps: gnome-shell[416] trap int3 ip:7f1024ce4289 sp:7fffc13c81f0 error:0
    [ 33.022441] type=1006 audit(1393624581.429:3): pid=439 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=2 res=1
    [ 33.028194] type=1006 audit(1393624581.436:4): pid=440 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=3 res=1
    lsmod
    Module Size Used by
    joydev 9631 0
    mousedev 10247 0
    btusb 19648 0
    bluetooth 326343 2 btusb
    uvcvideo 72804 0
    videobuf2_vmalloc 3304 1 uvcvideo
    videobuf2_memops 2335 1 videobuf2_vmalloc
    videobuf2_core 28243 1 uvcvideo
    videodev 111840 2 uvcvideo,videobuf2_core
    media 11719 2 uvcvideo,videodev
    nvidia 10621191 29
    intel_rapl 11776 0
    x86_pkg_temp_thermal 6991 0
    intel_powerclamp 8802 0
    coretemp 6358 0
    kvm_intel 131532 0
    kvm 396221 1 kvm_intel
    crct10dif_pclmul 4682 0
    crct10dif_common 1372 1 crct10dif_pclmul
    crc32_pclmul 2923 0
    crc32c_intel 14185 0
    ghash_clmulni_intel 4405 0
    aesni_intel 45548 0
    aes_x86_64 7399 1 aesni_intel
    lrw 3565 1 aesni_intel
    gf128mul 5858 1 lrw
    glue_helper 4417 1 aesni_intel
    ablk_helper 2004 1 aesni_intel
    cryptd 8409 3 ghash_clmulni_intel,aesni_intel,ablk_helper
    hid_generic 1153 0
    hp_wmi 7595 0
    sparse_keymap 3146 1 hp_wmi
    arc4 2000 2
    iTCO_wdt 5407 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    mxm_wmi 1467 0
    iwldvm 167738 0
    mac80211 474681 1 iwldvm
    snd_usb_audio 117811 0
    usbhid 40545 0
    snd_usbmidi_lib 19755 1 snd_usb_audio
    hid 90902 2 hid_generic,usbhid
    snd_rawmidi 18742 1 snd_usbmidi_lib
    snd_seq_device 5180 1 snd_rawmidi
    microcode 15216 0
    evdev 11045 11
    psmouse 88171 0
    snd_hda_codec_hdmi 36379 1
    iwlwifi 140193 1 iwldvm
    serio_raw 5009 0
    snd_hda_codec_idt 43508 1
    cfg80211 408199 3 iwlwifi,mac80211,iwldvm
    i2c_i801 11269 0
    rtsx_pci_ms 7258 0
    r8169 58423 0
    memstick 7504 1 rtsx_pci_ms
    rfkill 15651 4 cfg80211,hp_wmi,bluetooth
    mii 4027 1 r8169
    thermal 8556 0
    snd_hda_intel 37352 0
    snd_hda_codec 150017 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
    intel_gtt 12664 0
    drm_kms_helper 35710 0
    snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
    drm 239102 3 drm_kms_helper,nvidia
    battery 7565 0
    snd_pcm 77822 4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    ac 3334 0
    snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    hp_accel 16520 0
    i2c_algo_bit 5391 0
    mei_me 9552 0
    i2c_core 24760 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
    lis3lv02d 11283 1 hp_accel
    input_polldev 2818 1 lis3lv02d
    snd 59029 11 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    shpchp 25425 0
    mei 62867 1 mei_me
    wmi 8251 2 hp_wmi,mxm_wmi
    video 11425 0
    soundcore 5418 1 snd
    lpc_ich 13368 0
    processor 24620 0
    button 4605 0
    nfs 191568 0
    lockd 76942 1 nfs
    sunrpc 233786 2 nfs,lockd
    fscache 47797 1 nfs
    ext4 473259 2
    crc16 1359 2 ext4,bluetooth
    mbcache 6074 1 ext4
    jbd2 80912 1 ext4
    sr_mod 14930 0
    cdrom 34880 1 sr_mod
    sd_mod 31361 3
    atkbd 16806 0
    libps2 4187 2 atkbd,psmouse
    rtsx_pci_sdmmc 13911 0
    mmc_core 95465 1 rtsx_pci_sdmmc
    ahci 23048 2
    libahci 21698 1 ahci
    libata 172104 2 ahci,libahci
    ehci_pci 3928 0
    xhci_hcd 144553 0
    ehci_hcd 64171 1 ehci_pci
    scsi_mod 132250 3 libata,sd_mod,sr_mod
    rtsx_pci 32241 2 rtsx_pci_ms,rtsx_pci_sdmmc
    usbcore 180208 8 btusb,snd_usb_audio,uvcvideo,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
    usb_common 1648 1 usbcore
    i8042 13366 1 libps2
    serio 10721 6 serio_raw,atkbd,i8042,psmouse

Maybe you are looking for

  • Availability check at sales Order level

    I am working in retail project and we have Cash sales, Rush order, Standard order scenario. All articles are created as Trading articles HAWA. When we create a sales order with cash sales document type, Rush order the availability check happens at sa

  • Copy Control From Contract to Sales Order

    Dear All, I have created a Quantity Contract of 100 Target qty. I have created a Sales order with reference to the contract of 20 Order quantity and delivered 21 Delivered quantity. When I create another Order with reference to the Quantity Contract

  • I purchased ADOBE ACROBAT X PRO AND NEED TO REINSTALL ON MY MAC LAPTOP BUT NO LONGER HAVE THE PRODUCT KEY

    I WOULD LIKE TO RE-INSTALL ADOBE ACROBAT X PRO on my MAC laptop, my hard drive crashed but I no longer have the product key.  I downloaded this program from ADOBE.COM

  • Cannot Create PDF after CS5 install (MAC)

    I haven't tried every app, but so far ID, PS, and Illustrator only show my previous Acrobat 9 as an option to print a PDF file. When I use this option, nothing happens. If a file is created I have no idea where it is, since I never get to the point o

  • Home sharing library not showing up

    I have set up home sharing between my two computers, my old computer (secondary), and new computer (primary). Now they are on a good internet connection, and I am able to find them on my home sharing list, however, when I select my old computer's lib