HP ENVY m6-1105dx Notebook PC BIOS Password

Greetings,
I did some looking but didn't get an exact answer for my  HP ENVY m6-1105dx  Notebook, for which I would like to unlock the BIOS.
Anyone have the password/code that will help me, in the words of that musical genius F. Zappa, "reach nirvana tonight"?
TIA

That is not a customer-replaceable part. You'll need to take it in for service/repair.
Although I am an HP employee, I am speaking for myself and not for HP.
Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

Similar Messages

  • Hp g62 notebook - forgotten bios password!!

    How can i reset / recover bios password without diassembe the notebook?I don't have the tools and will to do it.
    When i do 3 times wrong password i've got :51937544

    Welcome Klmt. Try.
    44695580
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • HP 15-r030wm Notebook PC Bios Password locked out

    Could you guys please help me with system disable code.  Need password to get into bios.  Thank you. I get System Disabled 85434395 on the screen after my third unsuccessful attempt to access the bios.

    Hi,
    Sorry, my typos, please try:
       30592911 (zero, not nine)
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP ENVY m6-1105dx Notebook PC replacemen​t cover

    Dear Hp,
    I bought my Hp envy m6 notebook last summer and I had an accident with it and the back cover has started to crack. I was wondering if someone could tell me whether I can replace it or not, as I haven't been able to find any online. I fear that the problem might be getting worse and that eventually my laptop will stop functioning because of it. Thanks in Advance

    That is not a customer-replaceable part. You'll need to take it in for service/repair.
    Although I am an HP employee, I am speaking for myself and not for HP.
    Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

  • HP ENVY TS 15 Notebook PC BIOS won't install

    Have tried several times to install new BIOS, but it fails, leaving the message "cannot open the file". I still have the original F.36 BIOS which is bad. If I even open the BIOS, I cannot boot the PC again unti I remove the secondary hard drive from the machine, wait about 10 min., then restart. I think the boot order is wrong, but cannot go into the BIOS and look because it won't boot again. This problem has probably been fixed, but I cannot install a new BIOS. I understand there is a 'default' way to install a BIOS but I need detailed step by step instructions to even try it. I'm not confident doing this without very detailed instructions.
    Can HP support do this with a remote connection, without any interaction from me? Does anyone have a detailed step by step way to do this that doesn't require a technician to understand?
    Edited 27 OCT 2014 - I have since learned from the company that sold me this PC about a year ago, NOT  TO INSTALL ANY BIOS UPDATES FOR THIS MACHINE. There have been instances of 'bricking' or ruining the motherboard, rendering the PC useless.
    For now, if you open the BIOS and the PC wont re-boot, turn off, unplug, remove battery, remove secondary hard drive, replace cover, replace battery, plug in, WAIT 10 MIN, restart. Wait for the PC to finish loading, then repeat this process and re-install the secondary hard drive. The PC will operate normally as long as the BIOS is not opened again.

    Hello, @MarkZinn 
    Based on the issue you're having with the BIOS, I would suggest calling into HP Phone support to see if there is anything the can do to help.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • How to reset hp635 notebook bios password

    How do I reset my notebook hp635 bios password while I'm trying 3 time wrong password I receive message system disable with the code : 96322628  if there is any solution please help me!

    Hi,         Use the below code to reset BIOS 29080208 Or generate one from the below link http://bios-pw.org/ Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes.

  • Hp mini 110 bios password reset

    When I turn on my daughters computer it goes straight to bios password, Since i never added a password this is a problem!
    I tried pulling the cmos battery and that seems to have made the problem worse, any help would be greatly appreciated

    Hi,
    Please check your other post:
      http://h30434.www3.hp.com/t5/Notebook-Recovery/bios-password-reset-on-hp-mini-110-error-code-CNU0040...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Forgot the "power on" BIOS password for my Stream 11 do 11wm notebook.

    Please help. Forgot the BIOS password on my  Stream 11 do 11wm notebook. The system disabled number is 93944559 I would sure appreciate any help I can get with this problem.

    Steps to be followed:Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.Shut down the notebookUnplug the AC Adapter and then remove the batteryHold  down the Power button for 30 secondsPlug in the Power/AC Adapter (Leave the battery out for the moment) & Start the NotebookIf you now see a password box, Please type the same Password I shared before and press enter Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

  • HP Envy TS 17t-k000 BIOS password?

    Hello, I have an HP Envy TS 17t-k000 that somehow has a bios password request out of the blue, and  I don't remember ever entering a password. When I turn it on, I get a beep and then a little blue screen saying "Enter Administrator Password or Power On Password" and I cannot enter the BIOS or boot into Windows. I have tried pulling the battery for a day and that didn't do anything. After I fail to enter the password 3 times it says "System Disabled" and a number 51150848.  Can anyone help me?

     Enter  44838288 REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

  • HP Envy X2 BIOS Password

    I have lost my bios password
    Received halt code 67633281
    Any way to log back in?
    Cheers
    Charlie

    Try >> 78791807
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How to disable bios password for desktop hp envy 700 056

    I tried to remove the battery out of the motherboard and wait for 1 minutes and more, and then put in back the motherboard, but the password is still there. I don't know how to remove or disable the bios password. I need help, please.
    Thank you very much.

    Hi,
    Review this posted HP information.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Need bios password

    Hi -
    HP Envy 17t-j000 Notebook PC
    Windows 8.1 64bit
    Need password. Get system disabled number 72089604
    thanks
    This question was solved.
    View Solution.

    Steps to be followed:
    Use the unlock code posted above to enter the BIOS
    Disable all passwords that are enabled
    If asked for current password - type the unlock code
    For new password, just press ENTER key
    Repeat the same for verify password column.
    Then leave the BIOS by saving & exit option to save the changes.
    Troubleshooting:
    Incase if the Password doesn’t work please try a Hard Reset as follows.
    Shut down the notebook
    Unplug the AC Adapter and then remove the battery
    Hold  down the Power button for 30 seconds
    Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook
    If you now see a password box, Please type the same Password I shared before and press enter
    Hope this helps, for any further queries reply to the post and feel free to join us again
    Regards,
    GBL84
    Although I am an HP Employee, I am speaking for myself and not for HP
    If my POST has helped you, Please click the 'White Thumbs Up Button' to say Thanks!!
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem

  • Hp Envy m6-1105dx. Problems with my charger.

    Product Name: Hp Envy m6-1105dx
    Operating System installed: Windows 8
    I'm going to keep this simple.
    I bought this computer on February 20th, 2013, so up to this date It's been over a month. I've never bought a laptop before, and in just a little over a month...started to have these kind of complications.
    Since this is the hardware section, lets start with that.
    I plug in my charger, it does not work. I try a second time, and we have the same result. I have to continuously plug the charger in, and out in order to receive a charge.. I call this the "Hopefully it works” method. Problem number two, is that everytime my computer goes to sleep, the charger shows that it doesn’t register anymore....and this sets us back to problem one.
    This is a new laptop, so I believe problems with the battery really shouldn't be showing me these kinds of complications. I’m very frustrated at the fact that my laptop’s battery or charger will not work.
    For any other information that might help....
    Yes the battery is in, Yes my charger is plugged into the wall, and yes I've reset my computer to check if this problem would still Reoccur. The only thing I didn’t do is replace my battery, or charging cable. The reason being is that i just bought this computer.
    Thank you very much for reading this topic, sorry for the “Ranting” kind of approach, but I hope you can see my frustration.
    Any advice, or basically a solution to my problem will be very much so appreciated.

    Unfortunately it appears you got a lemon. It happens. If you have a return right at the point of sale, exercise it. Otherwise call HP and work your way through the phone tree to see about returning it.  The only other possibilty is that a BIOS update was just released on 3-15
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-116472-1&cc=us&dlc=&lc=en&o​...
    Of course you are going to have to catch it when it is working and the BIOS update entails a bit of risk if the computer crashes during the update. I would call Customer Service and ask them if they want you to try the BIOS update. Before they authorize a return they are going to make you go in and reset the BIOS to defaults and muck around in there a bit anyway.

  • I have an HP ENVY TS 17 Notebook PC that I'm trying to install an ssd

    I recently bought an HP ENVY TS 17 Notebook PC, nice laptop. Anyway, I bought a samsung evo ssd, I bought the drive caddy for it online, but I can not get the laptop to see the drive. I pulled it apart 5 different times thinking that I messed up. But after all that I still can't get it to work. http://www.amazon.com/gp/product/B00GIGJYBG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1. This is the drive caddy that I bought. I thought this was the right one, but I don't know. If anyone can help me, please respond to this post. Thanks

    Hello wily51501,
    Welcome to the HP Forums!
    I understand your notebook will not recognize a newly installed solid state drive (SSD).
    Are you checking in the system BIOS to determine if the drive is detected, or with the HP Recovery / Windows software? Sometimes it's as easy as enabling the drive in the BIOS. You can find information on this here, covered on step 7: Installing or Replacing a Hard Drive
    Here is a great guide that walks you through upgrading to an SSD: HP SSD Upgrade Kit Installation Guide. Furthermore this Maintenance and Service Guide has some more specific information for your exact notebook. It could be that the caddy you purchased is defective if the BIOS does not recognize the drive. 
    Here is a document published by Seagate that talks about drives that are not detected:  The BIOS does not detect or recognize the ATA / SATA hard drive.
    Hopefully this information helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • How do I reset HP Mini 110-1006TU BIOS password

    BIOS password for HP Mini 110-1006TU PC can no longer be remembered. How can I reset the BIOS password? Have tried removing BIOS battery but to no avail.
    Thank you!

    Try this, remove the Notebook and CMOS battery, AC Adapter and the hold power button down for a few sec. Put everything back it and then power up the notebook...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

Maybe you are looking for

  • Custom Calculation Script in a Form

    Hi, I am trying to understand a Javascript for a form I built in Adobe.  If it were excel the Formula would be =If(Subtotal > 40,40,Subtotal).....Subtotal is the field name by the way. Please help because this one is really kicking me.  Any help woul

  • Opportunities Partner Tables

    Hi All, I am creating a report in CRM regarding OPP. I am finding hard time locating tables for sales team of the OPP. I checked CRMD_ORDER_INDEX which gives me all the partner detail but i also want the PARTNER FUNCTION along with partner details. I

  • I have space on my ipod, but Itunes will not let me sync anymore photos

    I keep receiving this message from Itunes: Itunes will no longer sync photos to the ipod. Do you want to keep or remove photos previously synced to your ipod?

  • Screen clock shows time in mars

    Hi, On my MacBook 13" OS 10.5.8 my screen clock (the little one in the right hand upper corner) shows a different time from the date and time set and defined on my analog clock in the system preference settings. Well the analog and the digital clocks

  • Oracle Workflow mailer error

    I have Oracle 11, which we tried configuring to use TLS encryption but it failed. So I installed IIS relay, to avoid enabling TLS on oracle. Once I did this we did a simple email test and it was successful.  We then tried a live Workflow process, Acc