HP Envy M6, Fan Turn off after 2 seconds, No Display, Blank Screen with Light
Hi,
I have HP Envy M6 15" Laptop with Intel Core i5,
Few days ago, I get a problem with my laptop, below are the symptome when I push my laptop power button:
1) Screen backlight on but no display on screen
2) Fan turns on for 2 seconds, and then turn off
3) Power light stay on as long as I again push the power button again
4) Wifi light turn "Orange"
5) Harddrive, and DVD drive shows sign of power-on for the whole period, even I can eject the DVD tray...
But get no display on screen, even when I connect with external screen, and fan stays off.
Can i get any help from experts out there?
Thanks
Sohaib
@SohaibAfzal
Have you tried connecting an external monitor to your notebook, to see if there is a display?
Since your computer does not automatically shut down again until you press power again, it is possibly the display itself that is the problem.
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
When it does start up, are there any repeating flash patterns on the LEDs or beep patterns?
Computer does not start and the LEDs blink or the computer beeps
Here are some other sources I found that may be helpful to you.
Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
Resolving Problems with the Brightness of the Display
Diagnosing a Liquid Crystal Display (LCD) for Damage
This page is more informational about displays, for your reference.
About LCD Panel Defects and Terminology for HP Pavilion or Compaq Presario Notebook PCs
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!
Similar Messages
-
Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo. Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?
If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
-
Iphone turns off after a few mn of utilization with the battery full
My iphone 3GS turns off after the battery is fully regenerated. I can only use it a few minutes before it turns off. I have to plug it again to turn it on, and the indicator of charge is around 98 %. The problem does not come from the battery. Has anybody found the same dis-functioning? A solution? Thanks!
More than likely the iPhone has a hardware problem.
If there is an Apple store nearby, make an appointment to have this confirmed. -
I wanted to know if there is someone at Apple that can give me some guidance on how to use my ipod nano 6th generation. I am not sure if I am working it properly or if there is something wrong with it.
I cannot get back to home page; I shut it off and on and it just stays on same page. I cannot take the voice constantly interrupting the song or functions;
When you set an album in play it will just play the first song over and over never going to next song. The genius interrupts and starts randomly playing different songs; when you select a song the voice comes and and tells you the screen is dimming and then seconds later it turns off.
I have tried to read the directions put the ipod won't allow me to follow.
Please help!Is VoiceOver turned on? See here for more help on how to turn it off if need be.
http://support.apple.com/kb/HT4317
B-rock -
Display screen is turned off after timeout even when blanking disabled
After a recent update which among other things upgraded gnome to 3.10 my display blanking policy no longer behaves according to a configuration.
Currently it is being turned off (monitor says "no DVI signal" and switches off) after each 10 mins if idle time.
In Gnome's Power Settings I have 'Blank Screen' set to Never.
It used to work perfectly earlier, no blanking, but now it blanks not only when I'm idle, but even when watching some movie in VLC.
I am not sure if this has to do with Gnome update or some other system component is causing this.
Using nvidia driver.
Any hint or link to the topic with the workaround would be greatly appreciated.
I tried google and local forum search and found nothing on the topic
Last edited by dimsuz (2013-10-10 09:49:36)I just noticed myself this annoying issue and I do not use Gnome nor GDM.
The thing is after checking the xset settings with
xset q
I noticed that the DPMS settings for Standby, Suspend and Off were back to their default values (60/60/600) instead of the 0/0/0 as I am using
xset s off &
in my openbox autostart file to avoid the screen blanking.
The way I fixed it was to simply run
xset -dpms
being the DPMS featured as disabled when queried.
Afterwards I checked that the screen did not blank again and 1) logged out and 2) restarted checking both times that the DPMS were the ones expected (0/0/0).
Thus, so far, I have no issues with the screen blanking in a non Gnome environment (Openbox) anymore.
Last edited by root (2013-10-18 22:46:26) -
i tried to soft reset my ipod touch with the top button and the screen button. it turned off and then went to the blue screen with the apple like it should. however, it now just stays on that screen. it has a sort of clock looking thing at the bottom of the apple that does not move either. it has stayed on this screen for over 4 hours. i also can not hard reset it in itunes. i am not really goood at this sort of thing. does anyone have this problem or a possible solution? thanks
See Here for
Frozen or unresponsive iPod touch
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the iPod Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I hooked up my iPod to my computer to sync it and download purchases. When I returned to the iPod the screen was dark with the apple logo on it and it won't respond to my pressing the button on the borrom and it won't shut off. Have no idea what to do except let the battery run down. Any suggestions for solving this problem.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost -
Sound for messages and e-Mail get turned off after using handsfree in car
Does anyone have a solution when sounds alerting messages and e-mails are turned off after using the phone in var with handsfree (using Bluetooth)? The sounds are turned back on when restarting the phone but reoccurs after driving in car with handsfree again. This is very annoying when takling several trips with car during a day. The phone still rings when receiving a call.
I did find a solution to my iPhone-iPod-music-overriding-streaming-streaming-services-while-connected-to-USB problem Although, this solution is likely only applicable to BMW owners with the BMW Apps feature aka 6NR.
There may be other/simpler ways, but this seems to work:
1) Launch Pandora (or could be Mog, or other BMW Apps app) BEFORE you start iPhone/iPod playback
2) Start playback of Pandora via ConnectedDrive/BMW Apps.
3) Press Home button on iPhone, launch your streaming app.
The car still seems to think it's in the ConnectedDrive audio menu, as evidenced by the Entertainment details screen. You can now consistently play back any other audio service via your iPhone without the iPod audio overriding what you're doing. Good times! The only drawback so far is lack of ability to skip tracks via the steering wheel.
As long as you haven't started iPhone/iPod playback when you get in the car, you can often skip steps #1 and #2, and go straight into the ConnectedDrive menu, then go to step #3. Either way, following steps #1-3 works everytime. -
Macbook Pro 13 turns off after few seconds.
When I turn MacBook pro 13 on sound play and fans run at full speed but it runs turns off after few seconds.
Correction:
When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
- MacBook does not work on batery - evenif i disconect batery - no result
- I try with diferent power adapter - no result. -
Apple Mac book pro just turns off after few seconds after turning on
Hi Folks,
I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result
Please help...
Regards,
NadeemCorrection:
When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
- MacBook does not work on batery - evenif i disconect batery - no result
- I try with diferent power adapter - no result. -
for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?
If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
http://concierge.apple.com/reservation/us/en/ -
apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
My ipod shuffle turns off after exactly 30 seconds of play. Already had a similar problem?
Did you see my post above?
Have you tried a different set up earbuds to see if that helps?
What about resetting the Shuffle?
Resetting iPod shuffle
B-rock -
Does not turn off after a few seconds
My iPhone does not automatically turn off after a few seconds. This new behavior. Is there a setting for this?
Yes, Settings>General>Auto-Lock
-
Why does my nano keep turning off after a few seconds while I'm listening to my music? It's fully charged and brand new.
I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
My computer meets the requirements.
All software (Windows, iTunes and QuickTime) are up to date.
As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
'Readyboost' was already set at 'Do not use'.
No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
The problem still exists. Please help.
Maybe you are looking for
-
Web App CSV Export Puts Everything into 1 Column in Numbers 3.0
Hi Anyone have this issue before where the new Numbers by Apple, takes the web app export CSV and throws all data into one column? It displays the Template downloads just fine. Just not the Exports for Web App Items. Any tricks? Teejay
-
Captivate project takes long time to load on LMS
So I developed a bunch of Captivate 7 modules for a course I'd been working on for some time. When I finally loaded these up on the LMS, I notice that when the modules are launched, a pop-up window opens with a grey background and just stays like tha
-
Clips not showing up in project
I recently upgrade to FCE 2. I like the "capture now" option when capturing. The only problem is when i import clips they do not show up in the browser after capturing. They are imported into the proper scratch folder but i have to import them into t
-
SSRS reports running slow while fetching data from SQL server DB
We are currently facing issues with lots of our SSRS reports running very slow. Approx they are taking around 15-20 minutes compared to earlier which was 2-3 minutes. Also, the SSRS reports which fetch their data from a Database is acting as Subscrib
-
Ruler guides are not exact, Can you Help?
I'm dealing with a Block of text and the Frame is set to leading and the text is 10 pt and 11 pt leading. If i Drop a ruler guide on the baseline of the text I can put the continuation of the column in the next column and just line the top of the 2nd