HP Envy printer issues after loading Mountain Lion

Hi Since loading Mountain Lion on Macbook Air Command P on a web page prints only part of that page? For example in printing a bank statement, the description but not the amounts printed and many of the headings did not print.

Thank you to all but after rebooting, problem seems to have disappeared.

Similar Messages

  • HP Printer issue after installing Mountain Lion

    Hi, a few days ago I posted the following question regarding a printer issue and so far I have not been able to fix the problem.  Here's the original question and I will  continue the explanation after this....
    Hi, I am a fairly new iMac owner and I am really happy with my apple, however I have an issue with my printer and I kind a "blame" Montain Lion for it.  I have been using this HP Laserjet P2015 dn printer for a long time, initially with Windows and now with iMac.  The first year approximately there was no problem at all to print and the transition from Windows to Mac with the printer had no difficulties at all.  It was connected wirelessly via router.  After downloading Montain Lion I notice the printer intermittently lost connectivity.  The only way to print was turn off and turn on and it will print fine until the next time.  Now out of the blue it's doing the same thing so frequently I can't print a complete document at all.  It starts, and finish without printing the entire document or not connect at all.  I have tried everything, including a static IP address for the printer, connect the printer to the computer via USB, downloading all the printer updates from HP and nothing seems to work.  Just now, I did it again (for 100 times so far), delete the printer, reinstall and it's doing the same thing.  It connects fine (either via IP or USB) and it last connected only for a minute or two.  That's it.  It's a shame, because I like the printer.  The printing quality is great and to add more pain, I recently got a new ink cartridge ($100.00) capable of printing 3000 pages.  It has 70% of ink still.  Any computer sabby person out there has any ideas for me? Like I said, I've done everything.... inluding,
    1.  Remove the printer
    2.  Update the drivers
    3.  Assign a static IP address to the printer
    4.  Connect via USB
    5.  Disconnect the  printer for a while and restart the whole process again
    6.  Did a "cold start" to the printer
    I don't know what to do, and I don't want to spend more $$$$$ on a new printer.  Is Montain Lion to be blame for?  Please advise me.
    Any help will be greatly appreciated.
    At this point I do have the printer connected only via USB, prints one page (perfectly) and then goes offline.  Before installing Mountain Lion I did use the printer with my Mac for almost a year with no issues at all.  I even downloaded Mountain Lion again thinking of any flaws during initial installation.  I've done all the updates, drivers, uninstall, re install, repair disk permission, static ip address....you name it... I've done it all and nothing seems to work.  What makes no sense to me is that prints so great only one page and then is gone.... I would be happy to know the printer is dead and go get a new one but in my mind if it prints ok one page it still works.  I don't want to have a new printer and find out it does the same thing.  I can't keep myself away from blaming Mountain Lion.  IS THERE ANY WAY TO REMOVE MOUNTAIN LION WITHOUT THE RISK OF DAMAGING THE COMPUTER????  PERHAPS GOING BACK WILL PROVE ME MOUNTAIN LION IS THE CULPRIT.  Just saying... I am totally frustrated.  I guess the next step is to get a baseball bat and fix the printer once and for all.
    Any help will be greatly appreciated.

    Any fix for this? I have the same problem after upgrade.  It's off by many seconds.  Thank you.

  • Can not open .docx after loading Mountain Lion

    can not open .docx after loading Mountain Lion...Help

    Welcome to Apple Support Communities
    Open Finder and delete:
    ~/Library/Caches/com.apple.iCal
    ~/Library/Preferences/com.apple.iCal.plist
    If it doesn't help, press Command and R keys in boot and reinstall OS X

  • Ethernet connection issues after installing Mountain Lion

    After installing Mountain Lion I can't get my iMac to connect by ethernet. It says that no cable is connected. The cable/connection is fine. When I plug in my MacBook Pro running Lion, the ethernet connects just fine.

    same exact problem.  in fact, my iMac24 (2009) worked flawlessly until I installed the latest update to Mountain Lion.  I then checked my MBAir (2011) and it too has a problem when using the USB/Ethernet adapter.  Neither can get an ethernet connection.  I deleted my network preferences and rebooted my machine, played around with my Ethernet switch and even reboot my gateway/router.  I've never had to do any of this to my network until Mountain Lion.  Wireless is the only thing that continues to work on both machines.

  • Can't connect after loading mountain lion OS X

    Just finished loading Mountain Lion OS X and now although connected to wifi network, Safari, Mail and everything else just stalls stating unable to access/connect. Anyone know of a solution or had this problem?

    Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
    Configure IPv4
    IPv4 Address
    Subnet Mask
    Router

  • Cannot print PDFs after installing mountain lion

    I recently upgraded to mountain lion and have been having a series of problems!
    The latest is that after updating my drivers for my printer Brother 7840W, I am able to print word documents. But I just found out that I cannot print PDFs. It says, "looking for printer..."  However, I can cancel that and go and print a word document. So, i'm at a loss as to what the issue is. Any thoughts?

    The iMovie forum is here
    https://discussions.apple.com/community/ilife/imovie

  • Startup issues after installing mountain lion

    Since I updated to mountain lion two days ago I'm having issues starting my mac after system shut down. When I switch my mac on I get a black screen with what looks like DOS writing, it won't go to the login screen unless I hold down the power button till it shuts down then switch it on again then it will boot fine! I've tried repairing disk permissions but this has not helped.
    Any ideas?? tried ringing apple but they're closed :-(

    Hi Guys...
    Sorry its taken me a fews day to get back, well as it stands the situation is still the same!
    Heres what I've done so far:
    reset the PRAM - no joy
    reset the SMC - no joy
    ran the disk repair in recovery - no joy
    repaired disk permissions in recovery - no joy
    reinstalled mountain lion - no joy
    but I think I've narrowed down the problem from the log console, it would appear that my imac is automactially booting into single-user mode.... see below.
    01/08/2012 12:03:00.706 com.apple.launchd[1]: *** launchd[1] has started up in single-user mode. ***
    01/08/2012 12:03:00.709 com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
    01/08/2012 12:03:00.712 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    any ideas on how to rectify this would be great please...

  • HT4718 About Lion Recovery issues after installing mountain lion

    After finishing the installing process of OSx Mountain Lion from the App store, and trying to boot, an error was presented saying failed to create Recovery boot, so I got stuck.
    Now anybody knows if possible to install correctly, without creating an external drive with installation of OSX and recovery boot first?
    Tx
    Mario

    Here's a working bootcamp hard drive ( OSX 10.7 & Windows 7 ):
    MacBookAirs-MacBook-Air:~ macbookair$ sudo fdisk /dev/disk0
    Disk: /dev/disk0          geometry: 30515/255/63 [490234752 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AF 1023 254  63 - 1023 254  63 [    409640 -  244140624] HFS+       
    3: AB 1023 254  63 - 1023 254  63 [ 244550264 -    1269536] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [ 245821440 -  244412416] HPFS/QNX/AUX
    So do I just need to turn the 0C on my mac mini to a 07 ?

  • Issues after updates - Mountain Lion

    I just installed updates for iphoto and imovie.  Then I installed upate to Mountain Lion.  Now iphoto and imovie "crash unexpectedly".  When boot in "Safe mode" both iphoto and imovie load but problems - iphoto wont display photos in library unless swiping through images - otherwise blank window where photo should be.  imovie doesn't load previously created movies. 
    Don't know if this iphoto problem, imovie problem or Moutnain Lion problem....Love to restore to previous version but of course I didn't bakup...Help....
    Any suggestions....
    Neil

    Problem solved through Apple Support. Thank You Brian and Leroy.
    Had me delete iMovie and iPhoto. Reinstalled from original disc. Updated with current versions. Problem pesisted.
    Reset PRAM - Command+Option+P+R while restart
    Reset SMC - Lft Shift+Control+Option while restart
    Problem persisted.
    Restored OSX Mountain Lion - Command+R while restart. Followed prompts. Redownloaded and installed.
    YES! FINALLY! 3rd time is the charm.
    Again, thank you!

  • Safari refusing to close after loading mountain lion

    After loading the safari update to my new mac mini - I find that safari will not close - I have to force close the application.

    right click the icon in the dock, force quit

  • HT1338 UNresponsive Mac after loading Mountain Lion

    hi i upgraded to mountain lion and surprisingly my macbook has become dead slow in accessing any process, for eg if i open my mail or sliding a page in safari etc and switching between apps the cursor goes into indefinite swirl showing the colourful disc, the mac book pro has become useless with its unresponsiveness, i have checked iboost to boost my ram which goes very low inspite of having 6gb of ram and nothing except the browser being opened, i assume some backgound process is eating up my devices memory and moreove my battery life has also been severly compromised from earlier 4-5 hours to maximum of 1.5 to 2 hours only. Please sggest ways to trouble shoot and solve my problem and getting back the mac to its normal glory
    To speed up i have taken up the following procee,
    I have deleted unwanted apps,
    reduced startup process
    Removed unwanted cloud based apps like google and skydrive and paused my dropbox folder
    Hope this works, with te above i have noted a good improvement in batterylife but the unreposniveness is still prevalent
    my  spotlight starts indexing everytime  start my mac book pro, can you please suggest why ?

    Try Software Update.  I think you'll need to have Safari 6.0 under Mountain Lion.

  • My App store on my mac book is not loading after loading Mountain Lion

    My macbook pro is not the latest one with the Retina display but the generation before. Its pretty new.

    Have you tried a reset to see if it works after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Does this mean my imac is dying? only had issues after installing mountain lion:

    One of my drives seems to be at zero capacity, however I do not have near enough stuff on it to fill 499.25 gb Model Name: iMac  Model Identifier: iMac8,1  Processor Name: Intel Core 2 Duo  Processor Speed: 2.66 GHz  Number of Processors: 1  Total Number of Cores: 2  L2 Cache: 6 MB  Memory: 4 GB  Bus Speed: 1.07 GHz  Boot ROM Version: IM81.00C1.B00  SMC Version (system): 1.29f1  Serial Number (system): YM************6  Hardware UUID: 781EE1AC-9FE9-5E63-B077-27AF5AA70DC2 gvu:  Available: 321.42 GB (321,417,748,480 bytes)  Capacity: 498.93 GB (498,929,332,224 bytes)  Mount Point: /  File System: Journaled HFS+  Writable: Yes  Ignore Ownership: No  BSD Name: disk1  Volume UUID: 6600AAE4-B4A2-372B-A1B5-A111A4509A9F  Logical Volume:  Revertible: Yes (unlock and decryption required)  Encrypted: Yes  Encryption Type: AES-XTS  Locked: No  LV UUID: 94883655-9AA9-4F15-A3CA-DD186B155895  Logical Volume Group:  Name:  gvu  Size: 499.25 GB (499,248,103,424 bytes)  Free Space: Zero KB  LVG UUID: 5BB41A33-47E6-49FC-87EC-F4D739377BD2 Physical Volumes:disk0s2:  Media Name: WDC WD5000AAKS-40YGA1 Media  Size: 499.25 GB (499,248,103,424 bytes)  Medium Type: Rotational  Protocol: SATA  Internal: Yes  Partition Map Type: GPT (GUID Partition Table)  Status: Online  S.M.A.R.T. Status: Verified  PV UUID: 5CEE58ED-07D1-4D4E-B1F1-FAF9B0C77970
    <Personal Information Edited by Host>

    There is one thing you can do to try to determine what's consuming that space.  Launch a Terminal session, then type this command:
    sudo du -d 1 -h -x /
    and press <return>.  You'll be prompted for your administrative password, which won't be echoed as you type it.  Press <return> again after you type the password.
    The output will show one line for each file or directory at the top level ("/") of your disk.  That will give you a first-cut picture of what's consuming the space.
    Here are the things on my system that have a non-trivial amount of space:
    975M /.Spotlight-V100
    15G  /Applications
    17G  /Library
    5.8G /private
    3.8G /System
    37G  /Users
    606M /usr
    For more details on a particular entry, just put its name after the slash on that command, such as
    sudo du -d 1 -h -x /private

  • After downloading Mountain Lion, and after installing am told a fault has occured and i have to go back snow to Leopard

    After loading Mountain Lion from the apps store, all went well until after the install was completed, error  note came up and said I would have to go back to snow leopard as a dats retrival error had occured

    Welcome to the Apple Support Communities
    Press Command and R keys while your Mac is starting and reinstall Mountain Lion. If you have a backup, you can erase the disk in Disk Utility, reinstall Mountain Lion and restore your backup

  • After installing mountain lion i lost my pictures in iPhoto, lost my music in iTunes, internet became very slow. What can I do to fix this issues

    after installing mountain lion I lost pictures in iphoto, lost my musisc in itunes, my icluod is not working, internet its very slow and some other issues. There is a way how to fix these issues

    Open System Preferences > iCloud
    Deselect the box next to Photo Stream then reselect it.
    Now for your music. Launch iTunes. From the iTunes menu bar top of your screen click iTunes > Preferences then select the Store tab.
    Select: Music.  (and Apps and Books) if you want.
    Click OK.
    iCloud syncs via your Wi-Fi network so give it a minute or two to reset your photos and music.
    Slow internet ...   try turning off the modem for a few minutes, then turn it back on.

Maybe you are looking for