HP Envy SSD and recovery nightmare

Hello everyone,
I do a lot of higher level IT work at my job so when my brother got the "blue screen of death" on his HP Envy I offered to help, "No problem!"
All my attempts to recovery the operating system failed and after repeated attempts, and the discovery of a bad PC3L Ram card, I decided that his native mechanical HDD would be unreliable in the future. 
As much as the HDD technology has improved over the years, I am still hold the belief that laptops used (and moved) daily are susceptible to shock damage. And, for the record, this is the FIRST time in over 20 years that I have seen a ram module fail - the absolute first time. In case  you didnt know the HP Envy in this case requires LOW VOLTAGE ram (the L in PC3L). 
Since my brother carries his laptop everywhere I decided to upgrade him to a 500GB Samsung SSD. He purchased his laptop from Best Buy and it did not come with a recovery DVD.  So I decided to install a generic copy of W8 from another PC I had lying around and validate with his license code - nope! If you have an OEM version of W8 on your PC you MUST order the special recovery disks from HP since the Product ID must match the license code. This is a MUST! How do  you do that? Well, the ONLY way that the recovery disks are shown as a purchase option online is if you allow the HP support website to DETECT your HP laptop and the CHECK (using thier software) what updates are needed.  Then, and only then, will the recovery kit appear in the list of purchase options below the PC on their support website.  Entering the model number did not help. And, the ONLY way I was able to allow the HP support site to auto-check his laptop was to install an evalutation version of W8 (unactivated) 
You can chat with HP Support and they will send you the kit, but my chat lasted 2 hours with repeated language and cultural misunderstandings. Rashish (name changed to protect the innocent) finally caught on and sent me a recovery kit. In his defense I imagine he had dual screens with 20 chat windows open, but  who knows!?
OK, so then I ordered the recovery "kit" and was on my way - not so fast. It turns out that the recovery disks will not work with an SSD if the SSD size is smaller than the original HDD. That's right - it will NOT work.  HP support's explanation? "It gets confused" OK, well heaven forbid I confuse the poor thing. So my next option was to restore his PC using his old mechanical HDD...
The first attempt failed, like the 3 attempts with the new SSD,  but I did get further than with the SSD. It turns out that the COA is no longer on the bottom of the PC. There is simply a MS sticker and the words, Windows 8! 
I used RW Everything to grab his original OEM license code and product ID, but still have had no success. This is unbelievable  - I have NEVER had these issues restoring a PC. 
Last resort? Buy a retail W8 license, but that does not seem fair! 
John

My log from the failure! I have searched this P2PP BurnBoot failure also and it is all over the HP forum  - do you think they could give us a heads up about this failure? This is crazy - 
P2PP BurnBoot Check Failed
Possible Causes:
1. Yellow-Bang occured at Device Manager
2. Some silent-install failure of applications
3. Found failed at PININST_BBV
4. Found failed at PININST_BBV2
5. Found Memory Dump file
Suggestion:
1. Checking REGDEV_BB.LOG for drivers
2. Checking BBApps.log for applications
3. Checking MEMDUMP_BBV.log for memory dump file
Note[for ODM]:
If you know which component failed in preinstall process
after checking above files, please OTS it to the component owner.
Otherwise, suggest to contact TWN PDC NB-PreinPM or create PIN-Log and OTS it with OTS Category Image
[RegistryDevicesCheck]
Result=FAILED
FAILED DEVICE #0:
Description : Unknown Device
PNPDeviceID : USB\VID_0000&PID_0002\5&4198E80&0&7
Code : [43]
[PININST_BBV]
PININST (Mini-FBI) starts at: 16:30:45 Friday, June 20, 2014
[RunOnceThese_CMD#1]
LAUNCHED=> "C:\SYSTEM.SAV\UTIL\CLEANFBI.CMD"
START=> 16:30:47 Friday, June 20, 2014
END=> 16:30:54 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunOnceThese_CMD#2]
LAUNCHED=> "CMD.exe /c MOVE c:\System.sav\FactoryUpdate\boot.wim c:\System.sav\2ndCap"
START=> 16:30:54 Friday, June 20, 2014
END=> 16:30:55 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunOnceThese_CMD#3]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV1.CMD"
START=> 16:30:55 Friday, June 20, 2014
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 16:31:01 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#1]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\TDCWIDI_BBV.CMD"
START=> 16:31:02 Friday, June 20, 2014
END=> 16:31:03 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#2]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BCMacWL_BBV.CMD"
START=> 16:31:03 Friday, June 20, 2014
END=> 16:31:04 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#3]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EPChipset_BBV.CMD"
START=> 16:31:04 Friday, June 20, 2014
END=> 16:31:21 Friday, June 20, 2014
RESULT=> Command finished in 16 seconds.
>==============================================================================
[RunThese_CMD#4]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EPIVGA64_BBV.CMD"
START=> 16:31:21 Friday, June 20, 2014
END=> 16:32:07 Friday, June 20, 2014
RESULT=> Command finished in 46 seconds.
>==============================================================================
[RunThese_CMD#5]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\VGANVI_BBV.CMD"
START=> 16:32:07 Friday, June 20, 2014
END=> 16:32:08 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#6]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EPMEISHB_BBV.CMD"
START=> 16:32:08 Friday, June 20, 2014
END=> 16:32:44 Friday, June 20, 2014
RESULT=> Command finished in 36 seconds.
>==============================================================================
[RunThese_CMD#7]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EPMEICR_BBV.CMD"
START=> 16:32:44 Friday, June 20, 2014
END=> 16:32:45 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#8]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RST_BBV.CMD"
START=> 16:32:45 Friday, June 20, 2014
END=> 16:33:12 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#9]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Iffs_BBV.CMD"
START=> 16:33:12 Friday, June 20, 2014
END=> 16:33:13 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#10]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN_IAC_BBV.CMD"
START=> 16:33:13 Friday, June 20, 2014
END=> 16:33:14 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#11]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN_I8_BBV.CMD"
START=> 16:33:14 Friday, June 20, 2014
END=> 16:34:36 Friday, June 20, 2014
RESULT=> Command finished in 81 seconds.
>==============================================================================
[RunThese_CMD#12]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN4EE_BBV.CMD"
START=> 16:34:36 Friday, June 20, 2014
END=> 16:34:37 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#13]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RaWiFi_BBV.cmd"
START=> 16:34:37 Friday, June 20, 2014
END=> 16:34:38 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#14]
LAUNCHED=> "cscript.exe c:\SwSetup\powerset\sys_mem_check.vbs"
START=> 16:34:38 Friday, June 20, 2014
END=> 16:34:39 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#15]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPePrint_BBV.CMD"
START=> 16:34:39 Friday, June 20, 2014
END=> 16:34:50 Friday, June 20, 2014
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#16]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BCBT4_BBV.CMD"
START=> 16:34:50 Friday, June 20, 2014
END=> 16:34:56 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#17]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RaBtooth_BBV.CMD"
START=> 16:34:56 Friday, June 20, 2014
END=> 16:35:02 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#18]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\I_WPBT_BBV.CMD"
START=> 16:35:02 Friday, June 20, 2014
END=> 16:35:08 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#19]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPWBD_BBV.CMD"
START=> 16:35:08 Friday, June 20, 2014
END=> 16:35:14 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#20]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HP3DG6NB_BBV.CMD"
START=> 16:35:14 Friday, June 20, 2014
END=> 16:35:35 Friday, June 20, 2014
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#21]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EFIDIAG_BBV.CMD"
START=> 16:35:35 Friday, June 20, 2014
END=> 16:35:41 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#22]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Btooth_I_BBV.CMD"
START=> 16:35:41 Friday, June 20, 2014
END=> 16:35:58 Friday, June 20, 2014
RESULT=> Command finished in 16 seconds.
>==============================================================================
[RunThese_CMD#23]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSEU_BBV.CMD"
START=> 16:35:58 Friday, June 20, 2014
END=> 16:35:59 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#24]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Audio_BBV.CMD"
START=> 16:35:59 Friday, June 20, 2014
END=> 16:36:40 Friday, June 20, 2014
RESULT=> Command finished in 41 seconds.
>==============================================================================
[RunThese_CMD#25]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SynTP_BBV.CMD"
START=> 16:36:40 Friday, June 20, 2014
END=> 16:37:06 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#26]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EPSCT_BBV.CMD"
START=> 16:37:06 Friday, June 20, 2014
END=> 16:39:18 Friday, June 20, 2014
RESULT=> Command finished in 131 seconds.
>==============================================================================
[RunThese_CMD#27]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EPNIC_BBV.CMD"
START=> 16:39:18 Friday, June 20, 2014
END=> 16:39:54 Friday, June 20, 2014
RESULT=> Command finished in 36 seconds.
>==============================================================================
[RunThese_CMD#28]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EPFP_BBV.CMD"
START=> 16:39:54 Friday, June 20, 2014
END=> 16:40:30 Friday, June 20, 2014
RESULT=> Command finished in 36 seconds.
>==============================================================================
[RunThese_CMD#29]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CARSHB_BBV.CMD"
START=> 16:40:30 Friday, June 20, 2014
END=> 16:40:36 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#30]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CARCR_BBV.CMD"
START=> 16:40:36 Friday, June 20, 2014
END=> 16:40:37 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#31]
LAUNCHED=> "CMD.exe /c C:\System.sav\bbv\QFEList32.cmd"
START=> 16:40:37 Friday, June 20, 2014
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 16:40:43 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#32]
LAUNCHED=> "C:\SWSetup\ESUW8\ESURun.bat"
START=> 16:40:43 Friday, June 20, 2014
END=> 16:40:54 Friday, June 20, 2014
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#33]
LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"
START=> 16:40:54 Friday, June 20, 2014
END=> 16:40:55 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#34]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\QAWLAN_BBV.CMD"
START=> 16:40:55 Friday, June 20, 2014
END=> 16:40:56 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
PININST (Mini-FBI) exits at: 16:40:59 Friday, June 20, 2014
[Mini-FBI]
Result=PASSED
[PININST_BBV2]
PININST (Mini-FBI) starts at: 16:42:51 Friday, June 20, 2014
[RunOnceThese_CMD#1]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV2.CMD"
START=> 16:42:53 Friday, June 20, 2014
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 16:42:59 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#1]
LAUNCHED=> "cscript.exe c:\System.sav\Util\HP_OSEnh1\webcam.vbs"
START=> 16:43:01 Friday, June 20, 2014
END=> 16:43:02 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#2]
LAUNCHED=> "C:\SWSetup\ESUW8\ESUDelete.bat"
START=> 16:43:02 Friday, June 20, 2014
END=> 16:43:03 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#3]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSA_BBV.CMD"
START=> 16:43:03 Friday, June 20, 2014
END=> 16:43:04 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#4]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\IHPSAW_BBV.CMD"
START=> 16:43:04 Friday, June 20, 2014
END=> 16:43:05 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#5]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\VUDU_BBV.CMD"
START=> 16:43:05 Friday, June 20, 2014
END=> 16:43:06 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#6]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\URLOffer_bbv.CMD"
START=> 16:43:06 Friday, June 20, 2014
END=> 16:43:13 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#7]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\TtilesM_BBV.CMD"
START=> 16:43:13 Friday, June 20, 2014
END=> 16:44:24 Friday, June 20, 2014
RESULT=> Command finished in 71 seconds.
>==============================================================================
[RunThese_CMD#8]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SoliM_BBV.CMD"
START=> 16:44:24 Friday, June 20, 2014
END=> 16:45:10 Friday, June 20, 2014
RESULT=> Command finished in 46 seconds.
>==============================================================================
[RunThese_CMD#9]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SavCentM_bbv.CMD"
START=> 16:45:10 Friday, June 20, 2014
END=> 16:45:16 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#10]
LAUNCHED=> "c:\SwSetup\powerset\setactive.cmd"
START=> 16:45:16 Friday, June 20, 2014
END=> 16:45:17 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#11]
LAUNCHED=> "c:\SwSetup\powerset\batterycap.cmd"
START=> 16:45:17 Friday, June 20, 2014
END=> 16:45:18 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#12]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BTBUS_BBV.CMD"
START=> 16:45:18 Friday, June 20, 2014
END=> 16:45:24 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#13]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPCOSE_BBV.CMD"
START=> 16:45:24 Friday, June 20, 2014
END=> 16:45:26 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#14]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\IEHome_BBV.CMD"
START=> 16:45:26 Friday, June 20, 2014
END=> 16:45:27 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#15]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPUC_BBV.CMD"
START=> 16:45:27 Friday, June 20, 2014
END=> 16:45:38 Friday, June 20, 2014
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#16]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPREGW8M_BBV.CMD"
START=> 16:45:38 Friday, June 20, 2014
END=> 16:45:59 Friday, June 20, 2014
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#17]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPPlusM_BBV.CMD"
START=> 16:45:59 Friday, June 20, 2014
END=> 16:46:20 Friday, June 20, 2014
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#18]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\GameMetr_BBV.CMD"
START=> 16:46:20 Friday, June 20, 2014
END=> 16:46:46 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#19]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\FreshPM_BBV.CMD"
START=> 16:46:46 Friday, June 20, 2014
END=> 16:47:17 Friday, June 20, 2014
RESULT=> Command finished in 31 seconds.
>==============================================================================
[RunThese_CMD#20]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EngyStar_BBV.CMD"
START=> 16:47:17 Friday, June 20, 2014
END=> 16:47:23 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#21]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EbayMetr_bbv.CMD"
START=> 16:47:23 Friday, June 20, 2014
END=> 16:47:44 Friday, June 20, 2014
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#22]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Ebay_bbv.CMD"
START=> 16:47:44 Friday, June 20, 2014
END=> 16:47:51 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#23]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CyberMS_BBV.CMD"
START=> 16:47:51 Friday, June 20, 2014
END=> 16:48:37 Friday, June 20, 2014
RESULT=> Command finished in 46 seconds.
>==============================================================================
[RunThese_CMD#24]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CyberLP_BBV.CMD"
START=> 16:48:37 Friday, June 20, 2014
END=> 16:49:03 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#25]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BoxWin8_BBV.CMD"
START=> 16:49:03 Friday, June 20, 2014
END=> 16:49:29 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#26]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\AmaKinMT_BBV.CMD"
START=> 16:49:29 Friday, June 20, 2014
END=> 16:49:55 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#27]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EPSysBIOS_BBV.CMD"
START=> 16:49:55 Friday, June 20, 2014
END=> 16:50:11 Friday, June 20, 2014
RESULT=> Command finished in 16 seconds.
>==============================================================================
[RunThese_CMD#28]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\YouCamM_BBV.CMD"
START=> 16:50:11 Friday, June 20, 2014
END=> 16:50:42 Friday, June 20, 2014
RESULT=> Command finished in 31 seconds.
>==============================================================================
[RunThese_CMD#29]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\YouCam_BBV.CMD"
START=> 16:50:42 Friday, June 20, 2014
END=> 16:52:13 Friday, June 20, 2014
RESULT=> Command finished in 91 seconds.
>==============================================================================
[RunThese_CMD#30]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WinLive_BBV.CMD"
START=> 16:52:13 Friday, June 20, 2014
END=> 16:52:15 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#31]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Win8M_BBV.CMD"
START=> 16:52:15 Friday, June 20, 2014
END=> 16:52:41 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#32]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Snfish_BBV.CMD"
START=> 16:52:41 Friday, June 20, 2014
END=> 16:52:47 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#33]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SkypeM_BBV.CMD"
START=> 16:52:47 Friday, June 20, 2014
END=> 16:53:13 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#34]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\PPNIS2013_bbv.CMD"
START=> 16:53:13 Friday, June 20, 2014
END=> 16:53:14 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#35]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\P2Go_BBV.CMD"
START=> 16:53:14 Friday, June 20, 2014
END=> 16:54:25 Friday, June 20, 2014
RESULT=> Command finished in 71 seconds.
>==============================================================================
[RunThese_CMD#36]
LAUNCHED=> "CMD.exe /c C:\SWSetup\OCAMark\OCAMark.cmd"
START=> 16:54:25 Friday, June 20, 2014
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 16:54:31 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#37]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\NTStudio_bbv.CMD"
START=> 16:54:31 Friday, June 20, 2014
END=> 16:54:57 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#38]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\NIS180_bbv.CMD"
START=> 16:54:57 Friday, June 20, 2014
END=> 16:54:59 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#39]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\NetflixM_BBV.CMD"
START=> 16:54:59 Friday, June 20, 2014
END=> 16:55:25 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#40]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MSWordaM_BBV.CMD"
START=> 16:55:25 Friday, June 20, 2014
END=> 16:55:51 Friday, June 20, 2014
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#41]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MahjongM_BBV.CMD"
START=> 16:55:51 Friday, June 20, 2014
END=> 16:56:48 Friday, June 20, 2014
RESULT=> Command finished in 56 seconds.
>==============================================================================
[RunThese_CMD#42]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\intelWD_BBV.CMD"
START=> 16:56:48 Friday, June 20, 2014
END=> 16:57:44 Friday, June 20, 2014
RESULT=> Command finished in 56 seconds.
>==============================================================================
[RunThese_CMD#43]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RM4Win.CMD"
START=> 16:57:44 Friday, June 20, 2014
END=> 16:57:45 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#44]
LAUNCHED=> "cmd.exe /c c:\System.sav\bbv\defkey.cmd"
START=> 16:57:45 Friday, June 20, 2014
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 16:57:51 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#45]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSPIP12_bbv.cmd"
START=> 16:57:51 Friday, June 20, 2014
END=> 16:58:27 Friday, June 20, 2014
RESULT=> Command finished in 36 seconds.
>==============================================================================
[RunThese_CMD#46]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPQStar_BBV.CMD"
START=> 16:58:27 Friday, June 20, 2014
END=> 16:58:28 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#47]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPMroom_BBV.CMD"
START=> 16:58:28 Friday, June 20, 2014
END=> 16:58:34 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#48]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPCPhotM_BBV.CMD"
START=> 16:58:34 Friday, June 20, 2014
END=> 16:59:10 Friday, June 20, 2014
RESULT=> Command finished in 36 seconds.
>==============================================================================
[RunThese_CMD#49]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\DVD2D3D_BBV.CMD"
START=> 16:59:10 Friday, June 20, 2014
END=> 17:00:31 Friday, June 20, 2014
RESULT=> Command finished in 81 seconds.
>==============================================================================
[RunThese_CMD#50]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\DocElmo_BBV.CMD"
START=> 17:00:31 Friday, June 20, 2014
END=> 17:00:32 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#51]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Doc1212_BBV.CMD"
START=> 17:00:32 Friday, June 20, 2014
END=> 17:00:43 Friday, June 20, 2014
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#52]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CPwrDD_BBV.cmd"
START=> 17:00:43 Friday, June 20, 2014
END=> 17:03:40 Friday, June 20, 2014
RESULT=> Command finished in 176 seconds.
>==============================================================================
[RunThese_CMD#53]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CPDD_BBV.cmd"
START=> 17:03:40 Friday, June 20, 2014
END=> 17:04:21 Friday, June 20, 2014
RESULT=> Command finished in 41 seconds.
>==============================================================================
[RunThese_CMD#54]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Costco_BBV.CMD"
START=> 17:04:21 Friday, June 20, 2014
END=> 17:04:22 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#55]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BstByURL_BBV.CMD"
START=> 17:04:22 Friday, June 20, 2014
END=> 17:04:28 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#56]
LAUNCHED=> "C:\SWSetup\Wallpaper\Scripts\WallpaperInstallBOM.cmd"
START=> 17:04:28 Friday, June 20, 2014
END=> 17:04:29 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#57]
LAUNCHED=> "C:\SWSetup\Wallpaper\Disk1\Wallpaper.exe"
START=> 17:04:29 Friday, June 20, 2014
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 17:04:35 Friday, June 20, 2014
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#58]
LAUNCHED=> "C:\SWSetup\Wallpaper\Scripts\wallpapertheme.cmd"
START=> 17:04:35 Friday, June 20, 2014
END=> 17:04:36 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#59]
LAUNCHED=> "C:\SWSetup\Wallpaper\Scripts\Wallpaper_Result.cmd"
START=> 17:04:36 Friday, June 20, 2014
END=> 17:04:37 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#60]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\ASUPPOEM_BBV.CMD"
START=> 17:04:37 Friday, June 20, 2014
END=> 17:04:38 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#61]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\60NIS2013_BBV.cmd"
START=> 17:04:38 Friday, June 20, 2014
END=> 17:05:59 Friday, June 20, 2014
RESULT=> Command finished in 81 seconds.
>==============================================================================
[RunThese_CMD#62]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\7ZIP_BBV.CMD"
START=> 17:05:59 Friday, June 20, 2014
END=> 17:06:00 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#63]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SymHPE_BBV.CMD"
START=> 17:06:00 Friday, June 20, 2014
END=> 17:06:01 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#64]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HOSTEND.cmd"
START=> 17:06:01 Friday, June 20, 2014
END=> 17:06:02 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#65]
LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"
START=> 17:06:02 Friday, June 20, 2014
END=> 17:06:03 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#66]
LAUNCHED=> "C:\SYSTEM.SAV\FactoryUpdate\FU_6_119923_20131204_100A1\FU119923_BBV2.CMD"
START=> 17:06:03 Friday, June 20, 2014
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 17:06:24 Friday, June 20, 2014
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#67]
LAUNCHED=> "C:\SYSTEM.SAV\FactoryUpdate\FU_6_109204_20130516_100A1\FU109204_BBV2.CMD"
START=> 17:06:24 Friday, June 20, 2014
END=> 17:06:25 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#68]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSIOB_BBV.CMD"
START=> 17:06:25 Friday, June 20, 2014
END=> 17:07:12 Friday, June 20, 2014
RESULT=> Command finished in 46 seconds.
>==============================================================================
[RunThese_CMD#69]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSIOBPC_BBV.CMD"
START=> 17:07:12 Friday, June 20, 2014
END=> 17:07:58 Friday, June 20, 2014
RESULT=> Command finished in 46 seconds.
>==============================================================================
[RunThese_CMD#70]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\QAWLAN_BBV2.CMD"
START=> 17:07:58 Friday, June 20, 2014
END=> 17:07:59 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#71]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\DTICON_BBV.CMD"
START=> 17:07:59 Friday, June 20, 2014
END=> 17:08:00 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#72]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\HOTSTART_BBV.CMD"
START=> 17:08:00 Friday, June 20, 2014
END=> 17:08:01 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#73]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CUST_BBV2.CMD"
START=> 17:08:01 Friday, June 20, 2014
END=> 17:08:02 Friday, June 20, 2014
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
PININST (Mini-FBI) exits at: 17:08:05 Friday, June 20, 2014
[Mini-FBI]
Result=PASSED
[C:\System.sav\Logs\BB\60NIS2013.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\7ZIP.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\AmaKinMT.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\ASUPPOEM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Audio.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BCBT4.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BCMacWL.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BoxWin8.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BstByURL.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BTBHOST.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BTBUS.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Btooth_I.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CARCR.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CARSHB.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\ChkLicen.log]
Result=PASSED
[C:\System.sav\Logs\BB\Costco.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CPDD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CPwrDD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CustTweak.log]
Result=PASSED
[C:\System.sav\Logs\BB\CyberLP.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CyberMS.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Doc1212.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\DocElmo.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\DTICON_BBV.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\DVD2D3D.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Ebay.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EbayMetr.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EFIDIAG.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EngyStar.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EPChipset.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EPFP.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EPIVGA64.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EPMEICR.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EPMEISHB.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EPNIC.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EPSCT.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EPSysBIOS.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FreshPM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU107319.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU107890.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU108305.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU109204.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU109204_BBV2.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU109620.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU109909.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU112911.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU113155.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU115136.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU115188.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU116877.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU116880.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU119923.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU119923_BBV2.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU120855.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU_CTO.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\GameMetr.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HOTSTART_BBV.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HP3DG6NB.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPCOSE.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPCPhotM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPePrint.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPMroom.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPPlusM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPQStar.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPREGW8M.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSA.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSEU.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSIOB.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSIOBPC.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSPIP12.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPUC.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPWBD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\IEHome.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\IFFS.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\IHPSAW.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\intelWD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\I_WPBT.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\MahjongM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\MSWordaM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\NetflixM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\NIS180.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\NTStudio.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\OCAMark.log]
Result=PASSED
[C:\System.sav\Logs\BB\P2Go.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\PPNIS2013.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\PureOSSR.log]
Result=PASSED
[C:\System.sav\Logs\BB\QAWLAN.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\QAWLAN_2.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\RaBtooth.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\RaWiFi.log]
Result=PASSED
[C:\System.sav\Logs\BB\RM4Win.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\RST.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\SavCentM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\SD119585.log]
Result=PASSED
[C:\System.sav\Logs\BB\SkypeM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Snfish.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\SoliM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\SymHPE.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\SynTP.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\TDCULTRABOOK.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\TDCWIDI.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\TtilesM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\URLOffer.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\VGANVI.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\VUDU.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WallpaperOk.log]
Result=PASSED
[C:\System.sav\Logs\BB\Win8M.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WinLive.log]
Result=PASSED
[C:\System.sav\Logs\BB\WLAN4EE.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WLAN_I8.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WLAN_IAC.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Youcam.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\YoucamM.log]
Result=PASSED
[LogFiles]
NumOfLogs=113.
[DumpFile]
Result=PASSED
[WinSAT]
Result=PASSED
[17:15:03.08] Sysprep_succeeded.tag does not exist ...
[17:15:03.08] ------------------------------------------------------------------------------------------
[17:15:03.08] BBVLast.cmd : [20x] CTOError.flg is detected at the end of BBV process...
[17:15:03.08] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[17:15:03.08] ------------------------------------------------------------------------------------------

Similar Messages

  • Disk Utility from local SSD and Recovery Partition disagree

    Hi,
    When I run Disk Repair from my 15" MBP's SSD, I get this:
    Verifying volume “Macintosh HD”Verifying storage systemChecking volumedisk0s2: Scan for Volume Headersdisk0s2: Scan for Disk LabelsLogical Volume Group B133BE17-6899-41E8-B2B2-342B022BB2CC on 1 devicedisk0s2: Scan for Metadata VolumeLogical Volume Group has a 29 MB Metadata Volume with double redundancyStart scanning metadata for a valid checkpointLoad and verify Segment HeadersLoad and verify Checkpoint PayloadLoad and verify Transaction SegmentLoad and verify Transaction SegmentIncorporate 1 newer non-checkpoint transactionLoad and verify Virtual Address TableLoad and verify Segment Usage TableLoad and verify Metadata SuperblockLoad and verify Logical Volumes B-TreesLogical Volume Group contains 1 Logical VolumeLoad and verify 77248876-460F-4A19-B657-5A4CBF702894Load and verify 60268981-5213-4655-8A8A-743044EF5359Load and verify Freespace SummaryLoad and verify Block AccountingLoad and verify Live Virtual AddressesNewest transaction commit checkpoint is validLoad and verify Segment CleaningThe volume B133BE17-6899-41E8-B2B2-342B022BB2CC appears to be OKStorage system check exit code is 0.Verifying file system.Using live mode.Performing live verification.Checking Journaled HFS Plus volume.Checking extents overflow file.Checking multi-linked files.Incorrect number of file hard linksChecking catalog hierarchy.Checking extended attributes file.Checking volume bitmap.Checking volume information.The volume Macintosh HD was found corrupt and needs to be repaired.File system check exit code is 8.Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
    Then, when I run Disk Repair from the Recovery Partition, it says the disk is completely fine.
    What should I do? Thanks very much!

    Exact same problem on 2011 MBA.
    - Noticed message after Time Machine backup failed.
    - Ran verify with the following results
    - restarted with command+R then ran verify and repair in recovery mode with success (all fine)
    - ran verify again, fails, again.
    Modal message:
    This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
    Verify history:
    Verifying partition map for “APPLE SSD SM256E Media”Checking prerequisitesChecking the partition listChecking for an EFI system partitionChecking the EFI system partition’s sizeChecking the EFI system partition’s file systemChecking all HFS data partition loader spacesChecking booter partitionsChecking booter partition disk0s3Verifying file system.Checking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog file.Checking multi-linked files.Checking catalog hierarchy.Checking extended attributes file.Checking volume bitmap.Checking volume information.The volume Recovery HD appears to be OK.File system check exit code is 0.Checking Core Storage Physical Volume partitionsVerifying storage systemChecking volumedisk0s2: Scan for Volume Headersdisk0s2: Scan for Disk LabelsLogical Volume Group 238CA2E7-7C17-4312-8A15-BF------ on 1 devicedisk0s2: Scan for Metadata VolumeLogical Volume Group has a 29 MB Metadata Volume with double redundancyStart scanning metadata for a valid checkpointLoad and verify Segment HeadersLoad and verify Checkpoint PayloadLoad and verify Transaction SegmentIncorporate 0 newer non-checkpoint transactionsLoad and verify Virtual Address TableLoad and verify Segment Usage TableLoad and verify Metadata SuperblockLoad and verify Logical Volumes B-TreesLogical Volume Group contains 1 Logical VolumeLoad and verify 6464BE20-9BFC-4291-A56F-8FCF1E09FA78Load and verify B6790A78-7D56-4264-9A62-D37D5F0ABAAALoad and verify Freespace SummaryLoad and verify Block AccountingLoad and verify Live Virtual AddressesNewest transaction commit checkpoint is validLoad and verify Segment CleaningThe volume 238CA2E7-7C17-4312-8A15-BF69A8----- appears to be OKStorage system check exit code is 0.The partition map appears to be OK
    Verifying volume “Firefly”Verifying storage systemChecking volumedisk0s2: Scan for Volume Headersdisk0s2: Scan for Disk LabelsLogical Volume Group 238CA2E7-7C17-4312-8A15-BF69A82AFA9B on 1 devicedisk0s2: Scan for Metadata VolumeLogical Volume Group has a 29 MB Metadata Volume with double redundancyStart scanning metadata for a valid checkpointLoad and verify Segment HeadersLoad and verify Checkpoint PayloadLoad and verify Transaction SegmentIncorporate 0 newer non-checkpoint transactionsLoad and verify Virtual Address TableLoad and verify Segment Usage TableLoad and verify Metadata SuperblockLoad and verify Logical Volumes B-TreesLogical Volume Group contains 1 Logical VolumeLoad and verify 6464BE20-9BFC-4291-A56F-8FCF1E09FA78Load and verify B6790A78-7D56-4264-9A62-D37D5F0ABAAALoad and verify Freespace SummaryLoad and verify Block AccountingLoad and verify Live Virtual AddressesNewest transaction commit checkpoint is validLoad and verify Segment CleaningThe volume 238CA2E7-7C17-4312-8A15-BF69A----- appears to be OKStorage system check exit code is 0.Verifying file system.Using live mode.Performing live verification.Checking Journaled HFS Plus volume.Incorrect block count for file 1768734(It should be 10022 instead of 51590)(It should be 5144 instead of 1298272)Incorrect number of file hard linksChecking catalog hierarchy.Invalid directory item count(It should be 44653 instead of 44654)Invalid directory item count(It should be 34 instead of 33)Checking extended attributes file.Volume bitmap needs minor repair for orphaned blocksChecking volume information.Invalid volume free block count(It should be 31229092 instead of 29894396)File system check exit code is 8.Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

  • HP Pavilion dv7-4015ew secondary disc SSD and Recovery Manager

    Dear Friends !
    HP Pavilion dv7-4015ew + AMD 4 egs Phenom II N970 Quad-core 2,2 GHz + 8GB Ram
    I bought:
     - SSD GOODRam C40 128 GB
     - Cable connector: 23,5 cm long (netto - only cable) or 28,5 cm (brutto- all lenght). = Look fine, I can put it
    1. We have to options slot = 1. HDD 2. SDD or 1. SDD 2. HDD - when put all together (1.2 or 2.1) these it not work, comp even start (led is one signal and dead)
    Do I have good connetor cable? or what? or mabe I must turn on something?
    2. only 1. SDD
    Start Recovery Manager from Pendrive USB and we have 4 options:
         2 and 4 = laptop is coppy windows file, rebot, show bios HP, suspend !
         I turn off, turn on = and I have Recovery Manager ?!?
         I turn off, remove Pendrie USB, turn on = HP say " I dont have disc inside" ?!?
        3 (oryginal widows and software and HP software, like brand new)  = HP say:  " uuu... You have to small disc, smaller than oryginal and I cant copy windows file"
    P.S. in my oryginal  brand new HP I always do point 3 because is work fine and other points not work ( I dont know why - Hp do somethng wrong)
    What is going on?
    What big SSD I must buy to do point 3, 256Gb will be enought?
    Kind regards
    Mariusz

    I do WIN 7 copy on my exterior HDD ( image screen win7) and I rec a DVD Win 7 starter ... you know what I mean
    I put only SSD
    I rebot my HP, plug dvd and starting... "get back fresch image" I detect my exHHD and pictures Win7 on it, pusch "next" ,"next" ...
    and
    HP say " There is no disc to do instal fresh image"
    I have last chance , call to Miscosof for my Win7.iso image?
    regards

  • MSI GT780 DX Adding SSD and Recovery Problem

    I right now have 750 GB Sata in my Laptop i recently purchased 240 GB SSD (Corsair)
    Now my problem is
    i want to recover the factory settings to SSD  i mean i want to recover and install windows 7 with all pre installed drivers to SSD by keeping the recovery image in 750 GB Sata
    is there any way please suggest and help me as i do not want to loose the image which came with laptop and the laptop is very new brought 1 month back 
    Please suggest me solutions for my problem

    Hi,
    Have you proved by using Win7 backup located in Control Panel?
    If this tool doesn't work, then look at this tool:
    http://www.apricorn.com/products/notebook-hard-drive-upgrade-kits/ez-upgrade-universal-hard-drive-upgrade-kit.html?type=reg&id=1023
    Hope this helps.

  • SSD Trim and recovery software

    I have a crucial MX100 512G ssd and I know the windows 10 SSD optimize tool is SSD trim. However, after I ran the SSD optimization showing 100% trimmed, I noticed the trim didn't work because I could still recover my deleted files via data recovery software ( such as disk drill and others). Does it mean TRIM function will not wipe the block unless I do secure erase on the SSD, and people can still recover their deleted files even the SSD has TRIM function?  I thought if SSD has TRIM, deleted data could not be recovered. ( I even left the computer idle over night, and I could still recover the files I deleted). 

    dummykid, have you checked files integrity after the recovery? That is, for example, if you have recovered .jpg file with a photo were the photo viewable?
    The main function of TRIM is not to make data unrecoverable. Making data unrecoverable is a side effect of TRIM, one could say. 
    When a file is deleted from the drive the space it used to occupy should be TRIMmed and usually it occurs very fast. Recovery tools however, can still usually find the file with its name and attributes (size). This is because some data about old/deleted files can still be left in MFT (master file table) area.
    When you delete data from the drive TRIM sends information to the SSD controller to help it clear the corresponding NAND parts. But I belive that the MFT works the same way with or without TRIM, that is it still stores some data related to deleted files, like name and size. But it is file content you really want to recover, not the file name and attributes only. Recovery tool will find the name and attributes of the file and it will recreate that file with the data taken from the drive, but the data itself can be completely different from the original or even empty. Check that out!
    On my SSD I can 'recover' many photos (.jpg files) but they are unreadable, some of them have some random data and some have no data inside.

  • Purchased refurb twist. Win 8.1 installed on SSD and no recovery partition.

    I purchased a lenovo 2s30u twist as a refurb. the machine has a 24G SSD and 500G HDD. 
    Win 8.1 is installed on the SSD which makes it pretty much full. As I understand it, the OS is supposed to be on the 500G HDD and the SSD is used as a cache of the OS to speed up the boot process. 
    There is no recovery partition on this machine. I tried using the recovery drive maker and it has the recovery partition part greyed out. 
    All I wanTt to do is make this thing as it was from the  factory. Do I need to buy recovery disks? Is there another wray to move the OS to the other drive? Once it starts filling up with temp files and updates that tdrive will be completely full and won't work at all so I really need to get this moved to the proper drive. Any other advice is appreciated. 

    Hello,
    Have you contacted Lenovo by telephone to see if factory recovery media can be ordered for the unit?  If so, that should reinstall Windows 8 or 8.1 correctly, I would think.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Rescue and recovery problem with new SSD

    Hello all,
    i am new in lenovo forum.
    Recently i got a new SSD, so i installed win 7 there. Previously i had win xp in my old HDD. The thinkvantage blue button worked fine with my previous configuration (win xp+old HDD). Now, when i try to install RnR 4.3 for win 7 i got this error message "error 25014. There was an error installing the rescue and recovery boot manager. Return code: 6". Can any one suggest how to solve it and use thinvantage blue button in win 7 with new SSD.
    thanks in advance
    Reza 

    sorry i forget to mention that i an using  thinkpad T400. 

  • New Envy 17 3D delivered with 300GB SSD and 750GB HDD Want to change to not RAID

    I want to have all the applications and operating system on the SSD and the HDD completely open and avilable. How to adapt the setup to accomplish?

    http://newmodeus.com/shop/index.php?main_page=page​&id=30&chapter=0
    I saw in another post where it doesn't come with the caddy and cable, but I can't find that post now.
    Here's instructions on how to do it and if you click on "home" at the top and use the search on the right, the caddy and cable will come up for sale.  38.55 is the price.  I don't know whether hp has it or not, I think that was a problem on the other post as well. 
    Did someone help you? Pay it forward. Help someone else.
    NC4400, TC4400 Win 7 Ultimate, xp pro, both dual boot
    a bunch of thinkpads

  • Rescue and Recovery to clone to Crucial Msata SSD drive Not Working Error

    I have a T520 andI did a complete backup through Rescue and Recovery I did the back up to DVD. I then checked all the DVDs They all have data and are almost full. The T520 came with a Toshiba 500 gig HD, I have added a Crucial Msata 128 GiG, The T520 is running windows 7, and I have loaded the programs I use, and almost no data. The DVDs from the complete back up are marked as follows:
    Final SP Backup
    Startup Disk
    1c
    2c
    3c
    4c
    Final Q
    Final C
    All DVDs are full I Take out the Toshiba 500Gig put in my Crucial Msata Drive Boot with the Startup Disk select complete restore select from CD/DVD The T520 Asks for all the disks Some are only used for a few mnutes then after I put in final C It says it is going to reboot select drive after reboot and then I get the error screen:
    1. Insert Your windows installation Disc and restart your computer
    2. Choose your language settings
    3 Click Repair your computer
    File: \windows\system32\winload.exe
    Status: 0xc000000f
    The Selected Entry could not be loaded because the application os missing or corrupt.
    When you receive a laptop from Lenovo they do not give you Windows 7 discs. So there is no way to do a srt. All I want to do is get the Msata drive to boot and run the os and all my loaded programs. This way it is faster and more efficient. Is there a simpler way. Please help I have only got about 40 hours into this mess. Thanks for any help from the experts.
    Chipman

    I'm a bit confused about the process you are using and what you are trying to do.
    If I understand you,
    you currently have a working 500gb hdd with the operating system, your programs and your data.
    You want to move your operating system to the mSATA drive and have your computer boot from there.
    you have made a set of recovery disks using the Lenovo program. This is intended to restore your system to its original state (no data or extra programs)
    Here are a couple of options
    You can create a "backup and recovery" set of DVD's using the Windows built in programs (click the 'Start' button, then type 'backup' into the search box at the bottom) that will back up all of your system (OS, programs, data, setting etc.)
    Use a stand alone program like Acronis to create a clone of your current disk
    Thereafter
    Remove your current 500gb drive from your machine
    Install the mSATA drive
    Restore whatever image you want (the Lenovo recovery, the Windows restore or the Acronis [or whatever program you used] image)
    Reinstall your 500gb hdd and rename that drive to a letter other than 'C'

  • Can I have iTunes music on my SSD and an external drive? How will this affect syncing to iOS devices?

    I don't have space to keep my entire iTunes library on my SSD. Currently I have my iTunes library split as follows:
    SSD: Contains a subset of music, apps, books, etc. New items usually get added here.
    External HD: Contains all of my music and iTunes media (including apps... so many apps). It's usually missing the most recent items added, due to the fact I don't plug it in so often.
    I ran into a problem maintaining these two libraries earlier while syncing my iPhone. When I tried to sync the iPhone with the SSD library, it would delete apps off of my phone because they weren't contained in the iTunes library there, even though I had the same base .itl file for both the SSD and the external libraries.
    What I want to do is set it up so that I maintain a core of music on my SSD and the stuff I don't listen to as often on my external hard drive. I also want to keep all the space hogs (movies, apps, etc) on the external as well. However, I want this to appear as one seamless iTunes library and I DON'T EVER WANT ANYTHING DELETED FROM MY PHONE WHEN I SYNC IT. I want to be able to sync my phone without worrying that apps will be deleted and I'll have to restore them from iCloud and reset all the settings, sign in, etc. Right now I am backing up to iCloud, but my understanding is that iTunes will still delete things from my phone if they are not available in the library.
    My question: How do I accomplish this? I have a lot of metadata in my iTunes library that I don't want to lose (playcounts, ratings, etc).
    I currently have this:   SSD: .itl file pointing to music on the SSD, a mixture of iTunes media (some that I want easily accessible, some I don't)
                                      External drive: .itl file pointing to music on the external drive, all of my iTunes media (except for anything I may have added to the SSD)
    I think I need this:       SSD: .itl file pointing to music on the SSD and the external, music that I listen to often
                                     External drive: music that I don't listen to often, things that take up a lot of space
    My thought process is that I will need to somehow move music from the external to the SSD while maintaining the pointers so that iTunes knows where they are. For this I have unchecked "Keep iTunes Media Folder Organized" and "Copy Files to iTunes Media Folder When Adding To Library," and to maintain the pointers and move the songs, I'm thinking of using Doug's Applescripts for "Relocate Selected:" http://dougscripts.com/itunes/scripts/ss.php?sp=relocateselected
    Once I have the songs split across these drives, I'm going to copy the .itl file from the external to the SSD and boot it up to see if it works.
    Two things: 1.) Will this approach work? Can I maintain my library across separate drives this way and have it be seamless? I understand I won't be able to access the media on my external hard drive when it is not plugged in (duh), but...
    2.) Will it affect syncing? When my external isn't plugged in, will iTunes try and delete things from my iPhone? It should still be able to "see" them, it just won't be able to access them. Will I have to turn off syncing apps while syncing with my external device unplugged?
    Thanks very much for any help and insight! It is greatly appreciated as I deal with limited storage space and an expanding iTunes library.

    This is all just a partial answer since details will depend upon how you want to do it.
    Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Commercial software utility for transferring songs from i-device to Mac - http://www.fadingred.com/senuti/
    http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store
    You'll need to get it all onto one iTunes collection on your Mac Pro, then sync the devices to that.  iTunes only lets you transfer purchases from a device, otherwise you have to use third party software.
    I guess you could also look into getting iTunes Match.

  • Can i clone my macbook air HDD into an SSD and then install that on a macbook pro??

    i Have a macbook air 2013 with mavericks and my brother has a 2012 macbook pro with yosemite, i want to keep mavericks, can i clone my air's HDD into an SSD and install that SSD into the pro??

    Yes, although your MBA does not have an HDD. It has an SSD. Just put the new SSD into a dock or enclosure, clone your drive to it, then install the new SSD into the MBP.
    Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Destination means the external SSD. Source means the internal startup drive.

  • Issues with a T61 harddisk, UNMOUNTABLE_BOOT_VOLUME, cannot also get in the Rescue and Recovery

    Dear Lenovo Support Community,
    I have a T61 with XP pro on it. This is the history of my harddisk problems with it:
    (the harddisk is HDD0 Fujitsu MHW21160BJ G1 and everything in laptop (HW and SW) are same as the factory sold one)
    1. Unfortunately I had not made any recovery cd/dvd when the computer was healthy
    2. Some time ago, after a crash, and during the chkdsk in the following boot up, harddisk showed 12kb bad sector
    3. Due to more crashes and not being able to login once, went to rescue & recovery and only recovered OS to an old and healthy state. Kept my data, lost all the new programs installed but got the OS fine and running. --> I guess the bad thing that may have happened is that recovered OS may have used those bad sectors as well, but this is just a guess.
    4. Problems, slow downs, the 12kb bad sector, issues kept coming back every couple or few weeks. Repeated the rescue and recovery OS installations another two times.
    5. Few days ago, all was good, but needed to restart, but this time a blue screen came up with UNMOUNTABLE_BOOT_VOLUME. This screen comes up even if I try to go into safe mode, with networking, or even with only DOS prompt.
    6. Tried to go to rescue and recovery (version 4), it took a really long time and was telling me that something wrong with the file \minit\setupapi.log and after a long long time that it got in the page for rescue and recovery, it was not doing anything by clicking on any of the buttons.
    7. Took the hard out, connected it through an external enclosure to another computer, the main drive could not be read at all, I/O error, not distinguishable.
    8. But the SERVICE drive was understood and I could even run chkdsk /F F:\ on it and it repaired the file mentioned above (\minit\setupapi.log).
    9. Put the hard back into T61, went to rescue & recovery, this time the error on the file was not showing up, but since the step #8, I have not been able to get pass the initial screen of rescue & recovery. It doesn't go in at all.
    10. Found it through Google search, the famous post on this forum about fixing the Master Boot Record. Got the little program, burned on a CD, went through all of its steps, finished as described in the famous thread, but I am not sure if it has been any help to me so far.
    11. In few other occasions, connected the hard through the external enclosure to another computer and found online and used programs like Disk Doctors Windows Recovery Data and EASEUS Data Recovery Wizard and was able to just read inside both NTFS main disk and FAT32 service disk (windows can also read the service disk but cannot read the main disk). Using the free version of EASEUS, I could even read and save my personal data since my last backup, so I am good to even format the T61 hard but still I don't want to give up on that.
    12. While the lenovo harddisk is in it, in a restart went to BIOS (F1) and ran the harddisk diagnosis, It said: "Pass: Controller Diag, Error code 0000: Read verification failed". And after the "Test complete", it gave a red message in the middle of screen that "<<< An error was found. Call for service >>>"
    13. As mentioned in #1, I don't have Lenovo's recovery Windows XP CD(s) for T61, but I have some other windows xp installation CD's, I thought I can put them in CD drive, boot up from CD, and try to recover or repair the windows, It seems that they tell me there is no harddisk in your computer!! When I press "R" to go to recovery console, it tells me: "Setup did not find any hard drives installed in your computer."
    My questions for dear members of this forum are:
    1. Can I recover my T61 harddisk with the above description? It is being read nicely with the recovery programs, so it should have not been damaged seriously. Please guide me to other things that I can try?
    2. I can see and read the Service part of the drive from Windows (no recovery program needed) while connecting the drive through external enclosure to another computer. Can I run a program from the Service part of disk and make those T61 Recovery CD and DVD?
    3. If I purchase the Recovery CD(s) from Lenovo, would they be doing any magic or help in my case described above?
    4. Can I make recovery CD(s) from another T61 laptop and use them for mine?
    Thanks all for reading my long post and helping me. God Bless.
    Best Regards,
    AL_K

    Step One: Install windows
    Step Two: run system update
    Step Three: Your done (optionally have a beer and relax)
    Sorry, step three was a bit of humor I added.
    Actually these recovery CDs were produced before the first T61 was made, probably in 2006. The T61 line was replaced in 2008.
    You can activate with the code on your COA, I've done it many times, just make sure you do a full (new) installation, not an upgrade, from an oem disc.
    If you do end up using the original product recovery disc set, your steps are more like this...
    1. Install disc one...   wait 30-60mins
    2. Install disc two...   wait 30-60mins
    3. Install disc three...  wait 30-60mins
    4. Install disc four...   wait 30-60mins
    5. Install disc five...  wait 30-60mins
    6. Install disc six...   wait 30-60mins
    7. Install disc seven...   wait 30-60mins
    8. Install disc eight...  wait 30-60mins
    9. download latest service pack for windows and install (over an hour)
    10. Install (replace old version)  system update and run.
    11. go to windows update and update several years worth of patches and hotfixes. (1-4 hours)
    12. kick back and have a warm beer and cold pizza, if there is any left after I finished hours ago and celibrated already.
    Also, after going through all that, you've not only installed windows, then replaced nearly the entire operating system, but you've also used valuable harddisc space to make several redundant copies of the outdated files, drivers and apps. 
    Please understand, I'm not saying the recovery discs are a bad design, they work great, and back in 2006-7-8-9 I'd happily go through all that work, but today all the stuff on them is to old so it's futile to go through all that. It would be really nice if Lenovo updated the install discs, and we could download the latest version to use, but they basically just leave them untouched after the model line is released, so nothing on that disc is newer then about 2006.
    I'll also add that both George and I have done this well over 100 times each, so we wouldn't be suggesting this if it wasn't the best option, but in the end you'll have a working system no matter which route you take to get there, so the only question to ask yourself is...
    Do you like your beer cold and your pizza hot  
    Good luck, and enjoy your endeavours
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • How do I merge two seperate HD's into one.  I upgraded my MBP to an SSD and installed a hybrid in the optical bay.

    I intially planned to use my cloned system on the SSD and the Hybrid to be used as backup, media, whatever else.  But I only had access to certain program on another MBP and so I cloned it to a partition on the Hybrid.  So basically I have two seperate computers each isolated from one another.  I have two startup disks, 2 seperate everything.  And I have to be careful when syncing my dropbox and a myriad of issues when swithing from one to the other.  So does anyone have any questions about this or any suggestions as to how I can merge the 2 so that I can run the initial configuration I desired.  Oh and the performance between the Momentus XT hybrid and the Intel-520 ssd are getting closer and closer as time goes by that I almost don't notice a difference, grnted my MBP is only backward compatible to 3gbs so I don't get the performance of the 6gbps capabilities of the intel.  But GD its awesome. 
    I really would appreciate any suggestions.  the machine is 15" MBP mid 2010 with 10.8.2.

    I don't know that copying them from an external would be any different than doing it internally because they are physically seperated.  I have tried many different configurations.  It won't let me erase or format the SSD so that I can clone the Hybrid to it. Which is what I prefer to do but I haven't boot from the recovery or an external and tried doing it that way.  But even then I have to boot from each seperately, what is holding me up is I've lost both product keys to office and adobe ms 6 due to the fact of not only having them so long and always upgrade using dmg's as well as upgrading os's so often.  So those programs are only available on one computer. Which happens to be on a seperate internal disk.  A slick unix script would be nice.  I am just really tired of trial and error and would like to get back to using my stuff.

  • I have one 120GB SSD and one 1TB SSHD, how do do I make one of them my boot drive and the other my data drive?

    I'm currently upgrading my mid-2010 Macbook Pro 13", I've purchased some new RAM and also a 120GB SSD and a 1TB SSHD (Hybrid SSD and HD) with the intention of using an OWC data doubler to get rid of my dvd drive and place the SSD drive there instead. So after I've placed everything into the Mac, how do I make the SSD my boot drive with the OS on it and everything, and the SSHD where all my data (music, photos etc) are stored?

    Youll need to CLONE your internal HD to your target (temporarily) external drive.
    1. grab carbon copy cloner or (my fave) superDuper CLONE app.
    2. attach target clone drive via USB in an enclosure or HD dock. Firstly format the target (external new) HD in disk utility in “Mac OS extended journaled”
    3. clone internal HD to target HD (external)   [takes about 40 mins depending on size]
    4. Boot ONCE from external (go to sys. preference to boot from external) to TEST the new Clone
    5. open bottom (see videos on ifixit or youtube on same) and remove old, install new.
    http://www.ifixit.com/Guide/Replacing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Hard+ Drive/10378/1
    Done
    (FIRST TIME after installing,  boot will be SLOW,...normal and ignore that).
    Clone APPS
    Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    (Free superduper APP above)
    CCC App
    http://www.bombich.com/

  • Rescue and Recovery 4.3 on Windows 7 Pro

    I've just upgraded my ThinkPad R61 to Win 7 Pro, successfully installed all Win 7 ThinkVantage software and here starts my problem:
    When I try to create a backup using RnR 4.3 I get "Gathering system settings and data. Please wait" window, r2r.exe is working for a few minutes and that's it. Nothing more after 11 hours. I thought it may be related to ESET Smart Security, but no.
    Part of rr.log:
    Wed Nov 04 23:47:02 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\rrstrigger.exe -start
    Wed Nov 04 23:47:02 2009 RescueRecovery: Getting GUI mask is 16
    Wed Nov 04 23:47:04 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\rrstrigger.exe -start
    Wed Nov 04 23:47:04 2009 RescueRecovery: Getting GUI mask is 16
    Wed Nov 04 23:47:07 2009 RescueRecovery: Set LOCAL to UUID and reload backup before create backup!
    Wed Nov 04 23:47:07 2009 RescueRecovery: In GetBackupFolderName, get local UUID!
    Wed Nov 04 23:47:07 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\​common\backups.dat
    Wed Nov 04 23:47:07 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Second, \common\backups.dat
    Wed Nov 04 23:47:08 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, \common\backups.dat
    Wed Nov 04 23:47:08 2009 RescueRecovery: In GetBackupFolderName, get local UUID!
    Wed Nov 04 23:47:08 2009 RescueRecovery: C:\Program Files\Common Files\Lenovo\Scheduler\tvtschedinterface.dll
    Wed Nov 04 23:47:08 2009 RescueRecovery: g_pTVTSchedulerInterface is NULL!
    Wed Nov 04 23:47:08 2009 RescueRecovery: Get back from GetTaskNextRunTime and return value is 0, next run time is 2009-12-1 12:0:54
    Wed Nov 04 23:47:08 2009 RescueRecovery: Set LOCAL to UUID and reload backup before delete backup!
    Wed Nov 04 23:47:08 2009 RescueRecovery: In GetBackupFolderName, get local UUID!
    Wed Nov 04 23:47:08 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\​common\backups.dat
    Wed Nov 04 23:47:08 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Second, \common\backups.dat
    Wed Nov 04 23:47:09 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, \common\backups.dat
    Wed Nov 04 23:47:17 2009 RescueRecovery: Loc=1 NoPrimary=0
    Wed Nov 04 23:47:17 2009 RescueRecovery: In GetBackupFolderName, UUID is 0000000000000000-0000000000000000!
    Wed Nov 04 23:47:17 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\​common\backups.dat
    Wed Nov 04 23:47:17 2009 RescueRecovery: In GetBackupFolderName, UUID is 0000000000000000-0000000000000000!
    Wed Nov 04 23:47:17 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\​common\backups.dat
    Wed Nov 04 23:47:22 2009 RescueRecovery: Get the shutdown flag from service is 0
    Wed Nov 04 23:47:22 2009 RescueRecovery: Get the shutdown flag from service is 0
    Wed Nov 04 23:47:29 2009 RescueRecovery: Running: C:\Program Files\Common Files\Lenovo\msgbox.exe /t=56 /id=65 /wait
    Wed Nov 04 23:47:29 2009 RescueRecovery: In CreateSpecialBackupFolder, get szBackupFolder is C:\RRbackups\SZ\0000000000000000-0000000000000000
    Wed Nov 04 23:47:29 2009 RescueRecovery:  CreateSpecialBackupFolder: szBackupFolder= C:\RRbackups, szMidiumFolder = C:\RRbackups\SZ
    Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups" /inheritance:r
    Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups" /grant:r *S-1-5-18OI)(CI)F /T /C
    Wed Nov 04 23:47:29 2009 RescueRecovery: icacls Legacy folder: C:\RRbackups\*
    Wed Nov 04 23:47:29 2009 RescueRecovery: icacls Legacy folder: "C:\RRbackups\SZ" /inheritance:d
    Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
    Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
    Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
    Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
    Wed Nov 04 23:47:30 2009 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-1-0
    Wed Nov 04 23:47:30 2009 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-5-32-544
    Wed Nov 04 23:47:30 2009 RescueRecovery: getting index is 1
    Wed Nov 04 23:47:32 2009 RescueRecovery: BackupThread Started.  There are 1 partitions to back up
    Wed Nov 04 23:47:32 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\instapps.exe /capture
    Wed Nov 04 23:47:33 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\Migration\bin\r2r.exe /c "C:\SWSHARE\capture.sma"
    Thanks in advance for any help.

    I have:
    1.  Instslled a new 160GB, 7200 RPM Lenovo HDD
    2.  Clean installed Win 7 Ultimate (retail) x64
    3.  Clean installed all Lenovo and Microsoft Win 7 x64 updates
    On my:
    Lenovo T61p, T7700 2.4 Ghz, 4 GB Ram
    I downloaded Rescue and Recovery..tvtvrnr43_en.exe and saved it to my desktop.
    When I go to install the RnR I get the following error message:
    "Microsoft  Visual C++2005 Redistributal (x64) SP1 needs to be installed before you can install RnR".
    One of Microsoft's important updates was the above MS Visual C++ which I installed.
    I phoned Lenovo support in Atlanta and they said they offer no support on a retail version of Win 7.  They
    said that I was "missing some kernal" that came with the original OEM software which isn't on a retail clean
    install.  I'm baffeled since all other Lenovo Win 7 updates were able to be installed and are working properly.
    I'm stuck.  Any Suggestions please.
    Thanks,
    Altoid666
    T530,Core i7-3820QM,16GB Ram, Intel 530 SSD 240GB, Blutooth 4.0,Ultimate-N 6300, 15.6 FHD, Nvidia NVS 5400M., All software current.,
    Windows 7 Ultimate x64 , SP1. Office 2013 Professional

Maybe you are looking for