HP Envy Touchsmart 4-1118TU - Audio not working - Windows 8.0

Hello,
The audio on my HP ENVY touchsmart notebook has stopped working - notebook is approx 12 months old.
This occured seceral months ago, uninstalled the driver, reinstalled the driver and it fixed the problem.
Has now happened again, sometimes resetting fixes the problem but after several events it has now stopped working.
Tried uninstalling and reinstalling the driver again, but has not worked this time.
Currently running Windows 8. Have thought updating to Windows 8.1 may help rectify any bugs - but have not tried the upade as of yet.
Any help would be appreciated.
Jamie

Hi,
Please use the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03257712
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Envy touchsmart 17 recovery discs not working?

I just got my laptop its A HP Envy touchsmart 17 model:17-j043cl.
I made recovery discs right away because I also bought A Samsung EVO SSD 250 gig HD to replace the slow 1TB 5200rpm HD my laptop came with. Everything went good with making the recovery discs and it took 6 blank sony dvd-r to compleat using the HP included software(only lets you make 1 set or copy).
Now I do all the nessarry HP updates and OS updates.
I power down my new laptop, remove factory HD intall new Samsung SSD 250 gig HD in its place. power up the laptop and try to use recovery discs to load onto the new samsung SSD drive........Well NO LUCK, I get an error screen saying:
"The system recovery media does not support this compiter. You are not able to restore this system with the media"
So I do alot of searching I find that many others have had this same problem, and they resolved it by reverting back to previous BIOS, I know my BIOS was updated to f.43 after i made discs, how can I go back to what it was before the update to see if the recovery discs will work?
or is there another solution??

Hi Rizzo7883,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY TouchSmart 17-j043cl Notebook and having to restore the BIOS. Here is a document on restoring the BIOS back to defaults.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Windows 8.1 beats audio not working

Product name: HP ENVY TouchSmart Sleekbook 4
after update windows 8.1 beats audio not working
This question was solved.
View Solution.

Download the file below and instll , Restart and give your beats a try again. If you cant find Beats go to (Control Panel) and search (Beats Audio) then right click on it and create a shortcut, you should now have a shortcut to Beats Audio on your (Desktop)...
Let me know if this helps ...
DOWNLOAD LINK
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

Ac3 dts audio not working in my iphone but it works in my friends samsung mobile?pls help me.

Iam using o player... Ac3 dts audio not working msg showing

Settings > General > Reset > Reset Network Settings
Contact the carrier.

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Laptop left Speaker audio not working

Sir,
I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
Kindly do the needful

Hey @KKVK ,
Welcome to the HP Forums!
I understand your left speaker is not working on your dv5 notebook.
If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Audio not working on channel 5 and 7,, okay on all others????

audio not working on channel 5 and 7,, okay on all others????

dalharris wrote:
audio not working on channel 5 and 7,, okay on all others????
Without knowing all of the specifics in your situation, you may want to try these options:
- If you have a DTA, and your remote control has a LANG button on it, press it.
- If you have an HD or SD full cable box:
Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
- The audio settings on your cable box may have accidentally been changed:
Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
1. Press once for English
2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
5. Then press the Exit button (above the Volume button) to resume program viewing
Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
- If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

Sound/audio not work

sound/audio not work
Model- Compaq M2000.
S/N; CNF550117L,
P/N-EE462Pa#UUF
M2235

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HP Touchsmart tx2 1025dx keyboard not working. Touchscreen does work. Help.

HP Touchsmart tx2 1025dx keyboard not working. Touchscreen does work. Help.

I am having the exact same problem with the DoS beep that now sounds like screetching upon boot up. It is so bad that I can no longer turn off the computer, or it usually doesnt boot up for hours. I will give the USB keyboard trick a try tho.
The worst of it is that I leave the computer on standby at night to avoid the boot issue, and the computer starts itself up at night, like 2am and starts beeping nonstop until I manually power it down with the power button. Ive been having these problems for 2 years, since I first purchased the computer, and I just recently found out that the battery has failed, even though the computer is ALWAYS plugged in, and has been used on battery mode for all of 10 hours max. I believe this boot problem is a battery related issue. This battery is not on the HP recall list (not surprisingly).
I called HP customer support, and even contacted a case manager. They pretty much dont want to hear about the problem because I am out of warrantee x1 year. They pretty much dismiss it until I pay 330$ for repairs. They laugh at the anguish this night-time awakening is causing. Very disrespectful for HP customer service. Not sure if I will buy an HP again.
Anyways, let's work on this issue together. Can anybody send me a link to that manual? I would like to try resetting the RAM. This computer is in brand new condition, and the keyboard, battery and boot are all malfunctioning for no reason at all.
Best of luck in your search for answers.

Autofill function is not working, 'window' sticks through it not functional!

autofill function is not working, 'window' sticks through it not functional!

Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Quit and relaunch Safari.
2. Select your card in Contacts. Then select
Card ▹ Make This My Card
from the menu bar. Also select
Contacts ▹ Preferences ▹ vCard
and uncheck the box marked
Enable private me card
if it's checked.
3. In Safari, select
Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
If the box was already checked, uncheck it and then check it again.
4. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!

This topic has been moved to Operating Systems.
MSI Live Update not working Windows XP Professional 64bit Edition!!!

Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I?

ThinkPad internal microphone not working - Windows 8.1

Hello everyone,
I'm back on this forum because I had another issue... See my first one : http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440p-camera-not-working-windows-8-1/m-p/18...
There was a problem with the cable between the camera/microphone combo card and the daughter card. Now the camera is working properly. A technician replaced the cable.
But I realized that my internal microphone is not working. I don't remember if it worked once...
My microphone is not muted, and I reinstalled the real-teck drivers. When I try to use the "listen" option in the microphone properties, I here a sort of wideband noise (let's call it white noise).
Do you have any suggestions that might help?
Thank you very much
Moderator edit: Correct version of Windows in thread subject

Anyone ? Thank you !
EDIT : sorry I'm on Windows 8.1 not 7

HP Pavilion p7-1421 Desktop PC BEATS AUDIO not working.

Hi, new here with thankfully my first problem with the desktop in the subject line.
Somewhere along the way, the Beats Audio stopped working correctly. The Equalizer
sliders will not move at all, and the "Test Speakers" button will highlight the left, then right
speaker, but no sound will be produced.
For background, I did install StartDoc, a program that gives one back the original Windows 7 "Start"
button and desktop. Other than that, I have not installed anything, except the reccommended HP upgrades.
Also, the machine is obviously running Windows 8, and I have NOT switched to 8.1.
I see on the Notebook page lots of questions re. Beats not working and solutions, but each user is asked
for the specific model, OS etc. This is why I chose to post a new thread, so that the experts can address
my exact machine.
Thanks in advance,
John
This question was solved.
View Solution.

Hi srv1954,
I suggest reinstalling Beats Audio.
Open the Charms menu, select "Search".
Enter "Recovery Manager" and then select Recovery Manager from the list. Click "Yes "at the User Account Control.
Select "Hardware Driver Reinstallation". Select "Next". Select 'IDT High Definition Audio CODEC".
Select "Next"
Follow prompts to reinstall and reboot your PC.
Jaco.
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

Audio not working after I format from win8 to win7

product no:C0V01EA#ABU
Model:hp envy sleekbook 6-1126sa
Memory: 4096MB RAM
Processor: AMD A6-4455M APU ith Radeon (2CPUs) 2.1GHz
Hello, I have a problem I was unable to solve. I formated my pc from win8 to win 7 64bit , I installed all the drivers but my audio is not working . I would be glad if you can help me solve this problem.
Above is my product and model number.

Hi:
Please see if this driver works for you...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107001-1&cc=us&dlc=en&lc=en...

HP Envy Touchsmart 4-1118TU - Audio not working - Windows 8.0

Similar Messages

Maybe you are looking for