Hp envy x2 13 j002dx auto rotate not working Windows 10

since i upgraded to windows 10 the auto rotate will not work. ive reinstalled drivers. ive reset the laptop and re installed windows 10 but it still wont work. i can turn on and off the auto rotate but it doesnt do anything

Hi shyndm01
I just fixed the problem on my device. You need to run windows update, there are about 3 updates for Windows 10. Once install just restart and auto rotation will work again.
Hope this work for you!

Similar Messages

Yoga 2 Pro tent mode and auto-rotate not working

I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
Auto-rotate does not work at all now. The screen is un-locked.

Dear NX3
Welcome to Lenovo forums
Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
http://support.lenovo.com/us/en/downloads/ds038767
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Auto Rotation not working correctly Radius p55w B5112

It has not worked correctly since I bought it. I have recovered from image fresh again, and then went through and hit windows update and updated 134 updates. Auto rotate does not work in tablet or in presentation mode. The keyboard never shuts off and I can type in tablet mode. If I have this on my lap, the buttons are pressed. I have a lock on my screen rotation, it is greyed out and I cannot access it. Any other suggestions to fix this?? Everthing else works great!

Model Name: P55W-B5112
Part Number: PSVP3U-003003 Support site here If it is brand new and not working correctly then I suggest bringing it back and requesting a replacement or refund. It should work perfectly brand new without having to fuss around.

Auto Rotation not working on ipad 2 after upgrading to ios 6.0.1

Hi
I just upgraded my ipad 2 to ios 6.0.1 . Auto Rotate is not working ..I have tried to reboot(Pressing home and sleep button together.. I also noticed that red striker not appearing while doing it )
Also I made sure Lock Rotation is off.
Please help me..
Thanks

Just counter-check the following settings.
1. Settings>General>Set Side Swith To: Rotation Lock
2. Make sure side switch is not in lock position
3. If necessary do a reset a few more times

Auto-Rotate not working correctly after 8.1.1 update

Updated my iPhone 5s to 8.1.1 last night. Auto-Rotate will rotate to the side but will not rotate back now.
Surely this is not by design??

It may be an app that is doing it. If its fine after a reset and then does it at some point, keep track of what apps you are running. There was an app that would always lock my ipad2. I don't recall now which one. Somewhere along the line it must have got patched.
The only problem I'm having with the air is that the split keyboard comes up very crudely compared to ios7. A full gray rectangle is drawn and then the center disappears. It looks very ameturish.
I am having some Safari issues on my phone. Not sure if it's an iOS8 thing yet or not.

Windows 10 Screen Auto Rotation Not Working/Option is not visible or available

I just upgraded to Windows 10 through the microsoft app. Everyhthing works fine except the screen rotation doesn't work at all. The option to able or disable this feature is dimmed meaning that you can't interact with it. Please help if you know the solution.

Same here on Envy x2 13-j001ng, rotation does not work. I have verified that orientation sensor itself works (via Sensor Diagnostic Tool 0.7.2) and sensors services are running, but rotation does not work. Additionally, accelerometer controls in Asphalt 8: Airborne don't work either, so I suspect an issue lies within WIndows.

Auto rotate not working on iPad V5

Ever since I upgraded to OS version 5, auto rotation is not working. I have a display of a lock and arrow going around it in the upper right hand side of my screen. How do I turn auto rotate on?

Double click your home button to open your multi-task then slide your finger to the right, tap the lock icon.

Screen locking up and auto rotation not working on phone wakeup

Since updating to iOS8 my iPhone 5 and 5s will lock up when waking the phone. I also have noticed that the screen rotation does not work riight away and is sluggish. Certain apps tend to freeze which could be that they need an update themselves. It is a shame that Apple has resorted to using its customers as beta testers for their software. As a die hard Apple fan it is getting harder to stay true to the company. Apple should be leading not playing catch up which is why I think theses major software issues develop.

Model Name: P55W-B5112
Part Number: PSVP3U-003003 Support site here If it is brand new and not working correctly then I suggest bringing it back and requesting a replacement or refund. It should work perfectly brand new without having to fuss around.

X61t upgrade and auto-rotate not working

I just bought an x61t off trademe for $50. I've always coveted one because my old x60s was the best thinkpad I've ever owned. This one is solid and underused. I intend to upgrade to win 8 later, and add some more ram and swap in a SSD. Just use for text input and browsing.
My problems are finding a user manual/guide, finding any thinkvantage legacy upgrade and, the biggest problem is auto rotate and tablet interface buttons don't seem to be working.
Looking on Lenovo sites hasn't been helpful in finding any of this information or solutions. It may be obsolete and unavailable.
can I download button drivers from anywhere? Any other solutions you can help with are appreciated.

Hi syrahnose,
Here's your Hardware Maintenance Manual and here's a Service and Troubleshooting Guide .
You could also run TVSU and see if it comes up with anything for your tablet.
There are quite a lot of guides and manuals here .
Regards,
Dave
Edit: Windows 8 should run fine on your machine. I'm running Windows 8 on a non-tablet x61 and it runs fine.
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

S6000 3g auto rotation not function. Bios china language

Hello in the round,
I need help with my Lenovo S6000 3g. The auto rotation does not function, even though it is switched on in the android program.
I have done hard reset by mistake the wrong, and am unfortunately landed in the bios where everything is in china language.
When you go out again I have apparently adjusted the sensors.
Now the auto rotation is no longer
Can someone give me a tip on how I again.
Thanks for the help.
Manfred

You can try one simple solution, this may work or may not, but on many of the devices, it worked. Remove the sim card and turn on your tab. Now, it (auto rotation) should work. You can then after again insert the sim.
You can say thank you by pressing the star left to my post IF I HELPED YOU

After ios 7 update on ipad mini, auto rotation stop working. Anyone facing this issue too?

After ios 7 update on ipad mini, auto rotation stop working. Anyone facing this issue too?

for ipad,
if you go to settings-General
You can select between using the side switch to lock rotation or mute. If you select one mute, then the lock rotation icon will show up in the control center. If you select lock rotation, then the mute will show up. THe side switch is then used for the other option.

Auto brightness not working in ios6

I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

AUto attendant not working

Auto attendant not working .....
If i assign AA script Transfer_v02.aef then i hear an just 1-2 seconds the script after that again it is just ringing ...
Is there Option to set
Please press the extension which you want to Call ...
Eg: if i press 222 that time it should ring the 222 extension
Please help this is the first time i am working on this stuff
If i chnage the scrpt file then i can hear auto attendant not initiazlised.. please find the attched screen shot and back file for more details.
Best Regards
Shabeel

Hi KMS, check the codec used between that GW using the FXO and the CTI RP.
Check also the Calling Seach Space
GW should be able to reach CTI Route Point and CTI ports partition.
If you try other extension it works fine?

Auto keyframe and auto transition not working

auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?.

Auto dial not working

Auto dial not working
I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
I must have inadvertently changed some setting.
Skype works, MagicJack works, but I must dial the number manually.
I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
To say the least, I am frustrated because it must be something obvious. (to everyone else!)
Any ideas as to how to how I can get it to dial automatically again?
Thanks for any assistance.

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

Hp envy x2 13 j002dx auto rotate not working Windows 10

Similar Messages

Maybe you are looking for