Hp Envy17 3D 2090nr, change processor to Intel Core i7 2720qm and HyperXRam,​but dont work to 1600Mhz
Hi, I bougth one laptop Hp Envy 17 3D 2090nr, and I update hardware, first had one Intel Core i7 2630qm, and 8 gb Ram to 1333Mhz, two hard drives of 750gb, and I change to one processor Intel Core I7 2720qm, Memory HyperX kingstone to 1600Mhz, and SSD HyperX kingstone 120Gb, but I check in the Aida64 Extremum and the processor say ( CPU Mobile QuadCore , 3000 MHz (30 x 100) Sandy Bridge) but all system dont work to 1600Mhz, the chipset is HM67, Why dont work to 1600mhz? is possible that problem is in the Bios?
I put the last Bios release ( Bios F.1A)
Turboboost is a feature which you cannot enable or disable it. Its activated when OS requests for it. Download the Intel® Turbo Boost Technology Monitor from here and see how this features gets automatically active on the Notebook.
There is a support document available at below link explaining what and how Turboboost feature works
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02486485&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Also, make sure the drivers for Turboboost have been installed from here for your Notebook.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!
Similar Messages
-
Ram won't work on Intel Core 2 Duo Mac Mini - but it works on a Macbook
I purchased 6 gigs of ram from OWC. 3 gigs for the Mac Mini and 3 for the Macbook. I tried both sets of ram on the Macbook and it booted fine.
When I installed it on the Mac Mini, nada, ingenting, nothing - the mini would signal the dvd drive, but wouldn't boot. I guess the mini is more sensitive to ram quality. I'll have to go for higher quality ram for this particular situation.
I put the same ram into the Macbook and it worked just fine.Welcome to Apple Discussions!
Is your Mac Mini a 2 USB port Mac Mini or 4? The 4 is Intel, the 2 is PowerPC. That makes a difference in the kind of RAM you can install in it. -
just started today. i open safari 5.0.6 and it crashes and closes. it has been working fine for years. what is up ? Model Name:
iMac Model Identifier:
iMac7,1 Processor Name:
Intel Core 2 Duo Processor Speed:
2 GHz Number Of Processors:
1 TotalOpen Console in Utilities & see if there are any clues or repeating messages when this happens.
-
I have a MackBook A1181 that I bought off Ebay :/ it came with pirate discs and no info....I need to upgrade my Safari so Outlook will work and would like to
get some kind of word/writing tool on it... the info is:
Model Name: MacBook
Model Identifier: MacBook1,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MB11.0061.B03
SMC Version: 1.4f12
Serial Number: 4H631CVDU9B
Sudden Motion Sensor:
State: Enabled
Can anybody help?!First correct the pirate disc issue. Buy OS X 10.6 Snow Leopard from Apple for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Snow Leopard is the latest version your macbook 1,1 will run. Oitlook is part of the Microsoft Office suite, if you want outlook you'll need to also purchase Office. If you can get by with Apple's mail program there are free alternatives to Office like Libre Office or Open Office. -
I have a MacBook5,1 Processor Name: Intel Core 2 Duo Processor Speed: 2 GHz what operating system can i update to
If you are running 10.6.8 you can download 10.9 from the App Store and install it with going through 10.7 and 10.8 first. 10.9 Mavericks is a free download in the App Store.
10.9 Mavericks will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.9 http://roaringapps.com/apps:table
Also Mavericks doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mavericks.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
Hi, I bought a Macbook in 2007/2008 and am wondering if it is possible to update my system so I can get the new version of iTunes?
Here are my current system details: Mac OsX Version 10.5.8
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MB41.00C1.B00
SMC Version (system): 1.31f1The model 4,1 can run a maximum of 10.7 Lion. The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade from 10.5 to 10.6 with no problems as long as you have at least 1gb of RAM. Any program that runs under 10.5 should run under10.6. See this list for third party programs compatibility with 10.6: http://snowleopard.wikidot.com/ You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any Power PC applications
http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. Or go to http://store.apple.com/us/product/D6106Z/A/os-x-lion and purchase it there. The price is $19.99.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
I have an 20 inch Imac 2,4 GHz Intel Core 2 Duo and I want to introduce Final Cut Pro X into the machine. Can I change the present Videocard ATI Radeon HD 2600 Pro 256 MB, into a more suitable videocard? Or is that not possible? I have upgraded the memory to 4 GB 667 MHz DDR2 SDRAM.
The GPU in a iMac is NOT upgradeable.
You should check to see if your model of iMac meets the minimum specs to run FCPX.
I believe that your GPU is NOT OpenCL capable, and hence not supported.
Even if it works, you would probably get marginal performance.
What you can do is download the trial version and see how (and if) it works. -
MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
I have an i phone 5 s and i am trying to sinc using this computer mac pro and it doesn't sync trying to see if anyone can give me a solution to this..You need minimally Snow Leopard 10.6.8.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
I have a Mac with software version 10.5.8 My hardware overview: Model Name: iMac Model Identifier: iMac8,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.8 GHz Number Of Processors: 1 Total Number Of. I is it poss to upgrade to Lion.
Yes. You need to purchase Mac OS X 10.6 on DVD first.
(62528) -
My early (white plastic) 2006 imac freezes. I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times. Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Until I installed the SMC FanControl application my screen would "break up" into strange patterns and then would eventually freeze. Please help.If you are trying to upgrade using a gray-faced OS X disk from another system, that won't work, as those disks are locked to the system types they are delivered with. You'll need to drop the $29 on a retail copy of Snow Leopard, which is available from the Apple online store. Note Snow Leopard requires 1GB minimum, and you may want at least 2GB for better performance.
-
I bought my macbookpro in may 2007, will it work with Mountain Lion? Model Name: MacBook Pro Model Identifier: MacBookPro2,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.33 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache: 4 MB Memory: 3 GB Bus Speed: 667 MHz Serial Number (system): W872******
Apple states that (of the MBP lines) it has to be from Mid/Late 2007 or later. yours seems to be right on the line.
Apple says
If you are running Lion, you can find out if your current Mac qualifies by clicking the Apple icon at the top left of your screen, choosing About This Mac, then clicking More Info.
you must also have the latest version of Snow Leapord or Lion -
Each time I use a USB,IPHOTO,DVD or VMware Fusion connection the desktop mouse pointer freezes regards Model Name: Regards John
Model Identifier:MacBookPro10.6.8, 2
Model Name: MacBook Pro 10.6.8
Model Identifier: MacBookPro 8.2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
Serial Number (system): C2*******F8V
Hardware UUID: *****
Sudden Motion Sensor:
State: En
<Edited By Host>Hi Allan,
Thank you for your early response, I eventually managed to unZip the requested download, each time I tried the computer froze.
EtreCheck version: 1.9.12 (48)
Report generated 19 July 2014 19:27:23 GMT+01:00
Hardware Information:
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6490M - VRAM: 256 MB
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:4:34
Disk Information:
Hitachi HTS545050B9A302 disk0 : (465.76 GB)
- (disk0s1) : 200 MB
Macintosh HD (disk0s2) / : 465.44 GB (58.8 GB free)
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple, Inc. MacBook Pro
Kernel Extensions:
com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) Support
com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) Support
com.ZTE.driver.ZTEUSBCDCACMData (1.3.35) Support
com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.35) Support
com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
com.novatelwireless.driver.3G (3.0.13) Support
com.novatelwireless.driver.3GData (3.0.13) Support
com.novatelwireless.driver.DisableAutoInstall (3.0.13) Support
com.option.driver.Option72 (2.15.0) Support
com.option.driver.OptionHS (3.26.0) Support
com.option.driver.OptionMSD (1.21.0) Support
com.option.driver.OptionQC (1.11.0) Support
com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
com.vmware.kext.vmci (3.1.2) Support
com.vmware.kext.vmioplug (3.1.2) Support
com.vmware.kext.vmnet (3.1.2) Support
com.vmware.kext.vmx86 (3.1.2) Support
com.vodafone.driver (3.0.9) Support
com.vodafone.driver.Data (3.0.9) Support
com.vodafone.driver.DisableAutoInstall (2.0.6) Support
com.zte.driver.cdc_ecm_qmi (1.0.26) Support
com.zte.driver.cdc_usb_bus (1.0.26) Support
de.novamedia.driver.NMSamsung (0.0.2) Support
de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Startup Items:
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Problem System Launch Daemons:
de.novamedia.nmnetmgrd.plist Support
Launch Daemons:
com.adobe.fpsaud.plist Support
com.citrixonline.GoToMyPC.CommAgent.plist Support
com.trusteer.rooks.rooksd.plist Support
com.vmware.launchd.vmware.plist Support
com.zeobit.MacKeeper.AntiVirus.plist Support
Launch Agents:
com.citrixonline.GoToMyPC.LaunchAgent.plist Support
com.conduit.loader.agent.plist Support
com.epson.ews.launcher.plist Support
com.hp.devicemonitor.plist Support
com.hp.messagecenter.launcher.plist Support
com.trusteer.rapport.rapportd.plist Support
de.novamedia.VodafoneDeviceObserver.plist Support
User Launch Agents:
com.adobe.ARM.[...].plist Support
com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
com.google.keystone.agent.plist Support
com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
VMCStatusMenu
Dropbox
Vodafone Mobile Broadband
HP Product Research
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
AdobePDFViewerNPAPI: Version: 10.1.7 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.7 Support
QuickTime Plugin: Version: 7.6.6
Google Earth Web Plug-in: Version: 7.1 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
GoToMyPC Preferences Support
Trusteer Endpoint Protection Support
Top Processes by CPU:
18% mdworker
7% WindowServer
2% Dock
2% Vodafone Mobile Broadband
1% SystemUIServer
Top Processes by Memory:
242 MB AntiVirus
78 MB Dropbox
53 MB WindowServer
45 MB rapportd
37 MB MacKeeper Helper
Virtual Memory Information:
2.00 GB Free RAM
864 MB Active RAM
182 MB Inactive RAM
995 MB Wired RAM
164 MB Page-ins
0 B Page-outs
I appreciate your assistance in this problem
Regards
John (omegajon) -
I have mac book OS X 10.4.11 model No.A1181 (processor 2 GHZ Intel Core 2 Duo and memory 2 GB 667 MHz DDR2 SDRAM). To which newer version can I update and how?
Welcome to the Apple Support Communities
You can upgrade to Mac OS X Snow Leopard, and then, you should be able to use OS X Lion.
First, buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup of your data, insert the Snow Leopard disc and upgrade to Snow Leopard.
The disc will install Mac OS X 10.6.3, so open > Software Update to install 10.6.8, the most recent Snow Leopard version.
See if your Mac is supported > http://support.apple.com/kb/HT4949 If you see that it's compatible, call Apple to buy OS X Lion > http://support.apple.com/kb/HE57 Also, check if your apps are compatible > http://www.roaringapps.com -
Help, please. My iMac sound has gone all stat·ick·y The Video won't play correctly or at all. I have a Model Name:
iMac Model Identifier:
iMac12,1 Processor Name:
Intel Core i5 Processor Speed:
2.7 GHz I am running OSX 10.6.8So just to be clear on a few things:
Should partitioning the hard drive not work is it undoable?
Will this have any impact on doing a complete erase and reinstall and will that restore it back from the process?
Is there a limited amount of space that makes this process ineffective?
I have never had to do this sort of thing so I just want to be sure I don;t wind up in the dog house *)
Thanks again -
Can i use USB 2.00 or USB 3.00 with my laptop? How do I know which USB ports my laptop has? MacBookPro7,1 Processor Name:
Intel Core 2 DMacBookPro7,1
Your computer has USB 2.0 ports. You can use USB 3.0 devices with it, but at the speed of USB 2.0.
(103917)
Maybe you are looking for
-
Can I move my current Adobe programs to a new computer?
Can I move my currently-installed Adobe programs to my new computer? If so, what are the steps? Thanks!
-
Why does my computer keep crashing? Can someone look at these Problem Deta
My computer has been crashing A LOT recently. I really don't want to have to reinstall OSX, is there anything I can do besides repair permissions? What follows are the Problem Details from the report I sent to Apple. I should say that I was downloadi
-
Email notification - Application Owner Issue
Hi All, We are trying to config email notification on planning.we have to save the SMTPserver with application Owner user ID .........but the user ID application owner is deleted.......when we try to create the same user in HSS & try to give access p
-
Running config.cmd produces - The system cannot find the path specified
I had successfuly installed Weblgic/OSB and cofigured a domain on 64 bit windows 2008 I then uninstalled all components and re-installed everything |( including deleting all directires ) . When I come to run config.cmd to create the OSB Weblogic doma
-
Hi everyone, Is there a way to repair a corrupt zip archive? I have a rather large file, a 2GB movie I want to unzip, but I get an error message with every program I've tried (stuffit, archive, jimzip, zipeg, the unarchiver). When I tried to unzip di