HP ePrint Home&Biz for HP 2600n

Your page for the above Android app says, "Compatible with all smartphones and tablets that run Android 2.1 or later. Works with HP ePrint-enabled printers, legacy networkable printers and all-in-ones."
I'm trying to print on my HP Color LaserJet 2600n using the Android "HP ePrint Home&Biz" app on my Android smartphone / tablets (I have four!).
Each smartphone / tablet can immediately see the printer (which is connected via wired Ethernet to my home WiFi router) on my local LAN, by both printer name and DNS name. When I attempt to print, the yellow "progress bar" advances across the screen, and I see network traffic between the smartphone or tablet and the printer, but then I get "Print job failure" on the tablet, and continuous network traffic (does not stop) on the WiFi router between the two devices, until I kill the Android "HP ePrint Home&Biz" app. Further, the status panel and lights on the printer remain as if idle.
Note: Android app "PhotoBot" prints, but only in B&W (!?!?!?), and I think the HP app is better in other respects as well (as soon as I can get it to print!!)
Any ideas?

Hello,
Thanks for the post. With this one, there is a firmware update available for the printer, and I've included a link below that with some excellent steps to check regarding this issue. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=41103...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02933944&cc=us&dlc=en&lc=en&product=4110396&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Similar Messages

HP Laserjet Pro M1217nfw, support for ePrint Home&Biz on Android devices

Got my new LaserJet Pro M1217nfw installed on my home (secure)wireless network and am printing wirelessly from 3 windows laptops.
Started trying to get my smartphones to connect and print to it. Droid X Verizon, running gingerbread latest Verizon update. Download ePrint and ePrint Home & Biz to it. Upgraded my printer to latest firmware and SmartInstall, got an EPrint email address assigned to it. Am able to ePrint from phone just fine, but Home & Biz does not print, it detects printer and says has printed the file, doc, or pic but nothing comes out on the printer. I see from your lists of supportted printers that it is not
supported on th 1217nfw. Is it planned to work on it in the future? Can you give my some hints or workarounds if it is possible to get Home and Biz to work?
I tried the Wireless Direct feature on the printer, but really don't understand its purpose, since the printer and my phone are both
connected to my local wireless network, why does the wireless direct use a different SSID and assigned a fixed IP address?
anyway disabled that feature.
Thanks for any help!
This question was solved.
View Solution.

At this time ePrint Home&biz app is not supported on the HP Laserjet Pro M1217nfw. Other than ePrint using the printer emial address there isn't another solution with an Android device.
I am an HP employee

HP ePrint Home & Biz failing to find Business Inkjet 1200 on wireless network

I am trying to set up printing from my phone over my local network to an HP printer.
I have downloaded the HP ePrint Home & Biz app onto a Samsung SII runningAndroid v4.0.4 the app cannot find the HP Business Inkjet 1200 (C8156A) on the wireless network.
1) The printer is functional and other devices can print to it
2) The phone is able to conect wirelessly to the printer via a browser connection
3) The printer is on a fixed IP number
4) The BI 1200 is listed on the supported models page for ePrint Home & Biz app
5) I have registered the app with ePrint but should be able to connect via the local wireless network
I tried to use the Connect Manually option but it is tring to get me to supply an ePrint e-mail address. Do I really have to register the printer on ePrint to get this app to work?
As someone else said why not have an app that just formats the print job and sends it to the local printer?
Zeb
This question was solved.
View Solution.

The app can actually do what you want and print over the local network.
It sounds like what you are doing is going to settings, and then manage eprinters, and trying to add the device there. This section is only for eprint capable devices, and allows you to print to them even when you are not at the same location.
Go back to the home screen of the app.
Select a photo or document from within the app.
Simply push on the area near the bottom of the screen that may show a printer, or if its never printed it may just have a down arrow.
From here you should be able to click on printer and choose your printer.
The above method will simply search the local network for supported devices, and does not require any registration of the app.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

HP ePrint Home&Biz app not working. Print job failure:busy message appears on tablet

I have an HP Laserjet P1102W and am trying to print from a Viewsonic tablet (android OS) using the HP ePrint Home&Biz app. I can send an email to the printer via the tablet and it prints the document with no problems.
I apologize in advance for the long message...
If I try and hit the PRINT key on the lower bar (which says 'HP Laserjet Professional P1102W (NPI7...host name), all that happens is blue & green LED's come on, green, blue flashes, green, blue flashes, green, blue flashes, then green and blue stay on steady. Just before the blue and green come on steady at the end, the "print job failure:busy" message flashes on my tablet.
I assume the sequence of LED flashes is the HP printer receiving a print command 3 times and can not perform the task because the printer thinks it is busy.
After searching for this problem on the net, it would appear I am not the only person with this issue. And yes, I have tried powering down my modem, printer, PC, and tablet and restarting all the above. Not that the PC has anything to do with it, but I am desperate.
Does anyone have a viable working solution to this problem???

Hello,
Thanks for the post. With this one, there is a firmware update available for the printer, and I've included a link below that with some excellent steps to check regarding this issue. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=41103...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02933944&cc=us&dlc=en&lc=en&product=4110396&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

HP ePrint Home & Biz and HP3050 J610a and iPhone4

I realise that the HP3050 does not support eprint, I have however been able to connect my phone to the printer using HP ePrint Home & Biz app and scan a document, when I turn the printer off then back on HP ePrint Home & Biz cannot see the printer. I have tried the usual steps, power off printer and phone, power on phone then printer. Unplug printer from wall etc, turn off bluetooth. It seems to be random as well because sometimes it works other times it doesn't, lately I cannot get it to work. Any ideas

Hi RagDaz,
I wanted to first check on something you said here, the ePrint Home and Biz will only scan from ePrint capable printers.
Do you have the J610 or the J611 printer? The 3050 J610 does not support ePrint and the 3050A J611 does support ePrint and thus scanning from the ePrint Home and Biz app.
On to the question.
The behavior you are describing has a couple possible causes:
1. Poor signal strength - When the signal is strong enough, it works. When the signal weakens, it does not work.
If you suspect you might be having signal strength problems, try moving the printer and router into the same room and placing them about 6 feet apart.
2. Router problem - Some routers need to be restarted from time to time. Try powering off the printer, router and iPhone. Turn the router, iPhone and printer back on in that order. Wait for about 1 minute between, making sure the router had enough time to finish booting up before turning the iPhone back on.
3. When it does not work, make sure the iPhone is attached to the right network.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

HP ePrint cant find HP officejet Pro 8500 A909G but HP ePrint Home & Biz can why

We have reacently baught a IPAD
I have erlier used HP ePrint Home & Biz on android so i installed it on the IPAD and HP ePrint Home & Biz have no problem finding my HP officejet Pro 8500 A909G but when installing HP ePrint it just stands there enlessly looking for printers but doesnt find one. HP officejet Pro 8500 is in the list of supported printers
Any Idea

Thank you for clarifying.
Dlink routers provide Multicasting support disabled by my erxperience.
Try the following steps and then check for any change:
Enter the router EWS page by typing its IP address.
From the top menu click Advanced.
From the left menu click Advanced Network.
Make sure the Multicast Streams checkbox is selected.
Click Save Settings to apply and reboot the router.
Make sure the devices have reconnected and check for any change,
If there still having issues, I would recommend you to update the latest firmware for your router:
http://www.dlink.com/us/en/home-solutions/support/product/dir-655-wireless-n-gigabit-router
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp eprint home&biz app cannot find my hp officejet 100 mobile printer please advise?

I own a vizio tablet and a HP Officejet 100 mobile printer! I downloaded your Hp eprint home&biz app so I could print from my tablet and the download went will, I also registered via email. I went to print a form and your app could not locate my printer? Please advise,
Chuck

Hi Chuck,
HP ePrint Home & Biz only provide print capabilities over wired or wireless (802.11) network connection, Bluetooth connection is not supported as well the specific model is not supported by the app.
Can I print from the HP ePrint mobile app using USB or Bluetooth?
No. You can only print directly to supported HP printers on a local wireless network.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&lc=en&cc=us&dlc=en&product=5076465#N85
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to print to 8200 photosmart series printer after registration with eprint home&biz

I am able to print to a 8250 photosmart printer from my iPad till I register the product to allow me to print .doc file then I can't print to the printer any more.

Hi Harvey2499,
Unfortunately ePrint Home and Biz will not work with the Photosmart 8200 series printers.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

HP c309a and HP eprint Home&Biz

Hi all,
Got a weird problem I wondered if anybody could help with. Using HP eprinthome&Biz to print from my iphone and ipad to my C309a which is connected via Ethernet cable to my wireless router. All works fine providing I connect to the SSID of the wirless router directly however in order to get wirless coverage throughtout the house I use a WLAN extender from Devolo which broadcasts a different SSID in the more remote parts of the house.
When I connect to the Devlo SSID then eprinthome&biz cannot find the C309a any ideas or help gratefully received.

Hello,
Since you have no problems connected directly to the base router, it is likely that your extender has its DHCP settings enabled.
If you access your extender's settings and disable DHCP, this could solve your issue.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I installed the eprint home and biz app on my ipad. how can i print from my jetpro wireless printer

My iPad just states no printer found with air print. Is this an app that I need and will work with my wireless jet pro 8500

Hello Monimc,
To print using the HP ePrint Home & Biz app you will need to send the print from the app. AirPrint is built in to the iOS and give you the print option from emails and web pages. AirPrint is not able to work with the OfficeJet pro 8500. Hope this is helpful.
I work for HP but my posts and replies are my own thoughts.
If I have solved your issue, please feel free to provide kudos
Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

Officejet pro 8000 and HP Home & Biz print app

I have an Officejet Pro 8000 wireless that, according to HP's list, is compatible with the HP Home & Biz print app for the iPad 2. However, the app does not find any printers on the wifi network. I am running Win 7 and the printer is shared and works fine with printing wirelessly from the computer. I followed the steps in the app to auto find any printer connected to the wifi, but it does not find anything at all. The way I understand the app, it allows non-eprint capable printers to print using the app. Am I missing something?

Hi,
As you have mentioned the printer is shared from Windows 7, is the printer connected to the PC by USB?
In order to use the HP ePrint Home & Biz, the printer must be connected to your router by ethernet cable and then the up should detect it.
Please make sure both the iPad and the printer connected to your network.
Follow the steps below to access the printer EWS page:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01554589&cc=us&dlc=en&lc=en&product=3762364&tmp...
Once locating the printer IP address, type it into Safari.
Can you access the page?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Trouble adding printer to HP ePrint Home and Biz iPhone app - can't find printer's email address

I'm trying to connect my HP Photosmart c6380 to my iPhone. I already downloaded the app and my printer is connected to my wireless network, as is my iPhone, but I can't add my printer to the app.
When I go to "Manage ePrinters" and try to add a printer with the + button I see 3 choices:
Add ePrinter from list: "No ePrinters available"
Add Manually: I can't find the printer's email address even using the instructions found at the ePrint center.
Add from WiFi Network: My printer isn't shown in this list so it does not support auto discovery.
So I'm guessing that if I could just find my printer's email address that would connect it to my iPhone for wireless printing, but I can't for the life of me find it.
Any help is greatly appreciated.
Thanks.
This question was solved.
View Solution.

Hello amybett,
I have bad news and good news. The bad news is that your printer is not Airprint/ePrint capable. However, the good news is that with the HP ePrint Home and Biz iPhone app it does not need to be Airprint/Eprint capable, as long as it is connected to the same network as your phone.
Here are the steps you will want to take to print something:
1. Setup the app by completing the email registration and entering the code (which I believe you have).
2. Select the item you wish to print using the menu in the app (Photo Albums, Saved Files, Web Browser, etc.).
3. Once you select the item you should see the item and a large "Print" button under it.
4. If the printer you want to print to is not listed above the "Print" button, select the icon on the right (wrench/computer) and select the printer you wish to use (along with other settings).
5. Tap on the "Back" button in the top left corner, then tap "Done" (blue button in the top right corner), and then tap the "Print" button to print your item.
Let me know if you are still having trouble after following the guide above.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I want to create home page for my application with short URL

I want to create home page for my application with short URL
as when I want user to use my application user must go to URL like this
http://127.0.0.1:7101/My-Project/faces/app/empModule/allEmployees/viewMyEmployees.jspxI want the user to use short URL , How can I use shorter URL not all this one.
I want shorter URL for my application not to write full path .
thanks in advance.
Edited by: user611775 on Oct 31, 2010 10:21 PM

Well,
it's up to you. The first part (Mcit-Project-ViewController-context-root) is the context root which you define in the view controller project. 'faces' is the name the servlet filter reacts on. You can't omit it but shorten it in web.xml. The rest is your directory structure. I'm not sure how to shorten this other as to move the jspx files back into the web root folder.
By the way an ADF faces app never uses the .jspx at the end of the url. If you specify '.jspx', you only render the page but don't start the work flow.
Timo

TS2972 I have finished home sharing for my macbook air and apple tv, now how to see my macbook air on the TV monitor?

how to see my macbook air on the TV monitor after I finished home sharing for the system?

Did you purchase your MacBook Air new? Do you still have its box? Locate its serial number and telephone Apple at the number shown at the bottom of this page (1-800-MY-APPLE if you're in the U.S.). They can help you.

HP ePrint Home&Biz for HP 2600n

Similar Messages

Maybe you are looking for