HP ePrint red or green status on Android

I have an HP Officejet Pro 8500A Plus e-All-in-One Printer - A910g and have been printing quite happily to it from my Android phone using the HP ePrint app. Recently it has stopped working and I have a red dot as the status on the left instead of the usual green one. I have checked that I am running the latest version of the app and that the firmware on the printer is also at the latest version. I have the same problem from my other two Android devices (another phone and a tablet). I have tried rebooting the printer and resetting and removing and installing the app, but there is no change. I can print to the printer from my desktop and laptop without problems though.
What does the red dot indicate? I haven't managed to find any information or help on the app so that I can diagnose the problem.

@aptanet
If you are using the updated app then you are observing correct behavior.
To answer your question regarding the red and green lights. Red = busy and green = ready.
If your printer has a printer being sent to it or is being prepared for a print job from either the PC or a mobile device. The mobile device will observe the printer as "busy" thus the red light.
If the printer you are sendin your print job to is in the ready state and able to send a print job to it, then a green light will be beside the printer icon.
If it is bouncing back and forth, please make sure that other devices are not sending print jobs to the printer a the same time the app is trying to send a job to the printer.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

I have a red status dot on my iCloud account but have green status on yahoo and gmail account. What can I do?

I have a red status dot on my iCloud account but have green status on yahoo and gmail account. What can I do?

Open System Preferences > iCloud
Deselect the box next to Mail then reselect it.
Give iCloud a few minutes to re sync the accounts.

BPM: send green status notification?

Dear Expert,
we are using BPM in DSWP to monitor background jobs & interfaces.
the problem with us is the BPM only triggered yellow & red alerts whenever there is problem.
but when the problem is fixed by someone, there isn't way to send a green status alert to user for information.
can this be done?
we need send green status alert to functional or business user, they are not logon to solution manager to monitor the alert, but they request whenever the problem solved by operation team, they should then receive, or being informed by a green alert. How can this be done ?
please advise.
thank you
kelly

Hi,
Check this linkg. This should solve your problem.
http://help.sap.com/saphelp_NW04/helpdata/en/b2/dfee407552742ae10000000a155106/content.htm
Feel free to revert back.
-=-Ragu

After upgrading to 6.1.3 battery drains fast. Moreover initial charging takes more time to change battery indicator from red to green. any solution ?

After updating the iphone 5 to IOS 6.1.3 battery drains fast. Also it takes more time to change battery status from Red to Green. Any solution?

Anyone?
Thinking I'm S.O.L at this point.

Failed info package, failed request turns from red to green after 1 hour so

hi,
There is a failed info package and if u go to monitor screen, the request status will be red in colour but then the same request after 1 hour or so turn from red to green automatically, why is this, what could be the possible reason??????????

Hi Lieu.
The system automatically sets the status for the load to incorrect if the waiting time is exceeded. The load will still be running even though it might look incorrect, and that is why it turns green when it is complete (and everything is correct).
You can set the waiting time if you go to the monitor -> choose a request -> settings -> waiting time up to status incorrect (ctrl + F9).
Hope it helps (assign points if helpfull!).
BR
Stefan

Is making it both red or green safe as long as it's in the PSA?

Hello All,
Say for example a delta fell over for master data when trying to update to the target. I proceed to put the correct master data into the infoObject and activate. If the delta reached the PSA - would it matter wether I set the delta's technical status red or green and deleted it out of the target and the reconstructed? - basically I am trying to find out if you get data loss in one of the scenarios or no data loss in both scenarios?
Many thanks and kind regards,
Keith

Hello KeiTh,
How r u ?
Always, it is safe having the data in PSA. If a Delta failed, yes you can load it from PSA, also if some errors are there we could correct it in there.
When the data is loaded correctly what is the reason to make the request RED ??? Also, if u delete it and load again it will give a message like "The delta has been loaded already".
Best Regards....
Sankar Kumar
+91 98403 47141

Is there any way to set red to green and then delete all that in one time?

Hi,experts
In our delta data load requests include lots of red status record, in the usual way , we must fix the red status to green and delete it one by one.
Is there any good way to set status red to green and then delete all that in one time instead of one by one?

hello,
yes there is ways to delete the requests in one time.
1) Note the bad request number
2) Go to SE16
3) Open table RSODSACTREQ. Filter the contents by that request number . There will be entries for that request . Delete that entries.
OR
4. Open table RSICCONT. There will be one entry for that request . Delete that entry
OR
5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request depending on number of data packages in that request .Delete all those entries
Hope this helps
Kumkum

Battery changes from red to green

The iPod Photo battery sometimes changes from red to green or green to red is something wrong with the battery. Some times it shows full then a minute later its red.

Also,
If you have used your iPod extensively and it has gone through many partial charge cycles without being completely run down then charged completely (more than 5 hours), your battery status indicator could require calibration.
This has happened with my iPod mini (the battery would appear almost full then almost empty after a minute). To re-calibrate the indicator, just run your iPod down completely (where it shuts down on its own), then charge it completely (5 or 6 hours). This seems to work, and Apple used to recommend doing it every 30 charge cycles or so (not sure if they still do).
~M

How do I create a second set of red yellow green buttons for right handers

I've moved over from using a PC for years and still use one at work - so I've grown used to using my mouse for everything.
So, being right handed - I'm wondering how I can move or better yet create a second set of red yellow green buttons at the top right of each screen. It's a pain having to scroll from one corner to the other all the time.

Welcome to the forums Chiliad. It's rare that a question like yours is answered "you can't do that" but I've never heard of someone wanting to do this. OS X is robustly customizable right out of the box with its many different ways of accomplishing identical tasks, but I suspect the locations of these buttons is somewhat of an Apple trademark and rooted deep in OS X code. I would avoid trying to hack the system to change their location lest such a change cause a future OS X update to break.
There are many third party tools available to customize OS X to your liking, but I can recommend without reservation just a few. Products like Tinker Tool and the utilities written by Unsanity seem to be generally useful and trouble-free.
You can minimize a window by double-clicking anywhere in the title bar, but I find Exposé to be much more useful when managing multiple open windows. I've grown to use Apple-w to close and Apple-q to quit, but that's just me.
Seems to me the engineers at Apple have put an enormous amount of effort into designing an effortless user interface, which in my opinion rewards the user with an experience that doesn't get "in your face" as much as Windows does. It's hard for me to imagine improving upon it much, but there are plenty of others who try!

Iphone 6 while plugged in during night lit up, screen turned red then green then black. Apple icon comes on and won't work for 15 minutes

IiPhone 6 plugged in to recharge, lit up, screen turned red, ro green to black and could not get it to work. Pushing buttons cause Apple icon to appear, then did the color thing again. After unplugging for 15 minutes, it seemed to reboot and work fine all day. This occured 2 at hotels on 2 different days. Anybody have this occur and know what the deal Is. Working fine now.

See what happens tomorrow New software update iOS 8.1 out tomorrow If the problem comes back try and take photos of screen and return IPhone to store for replacement. Bsydd uk

How can I remove red and green lines from a footage?

I cannot remove red and green lines without removing the title graphics that I have in my footage. How can I solve the problem and keep the graphic there?

@Ann Benns
I will try to do that. Thank you!
@Bill Hunt
Well, the raw footage is an avi filmed with a handycam. This error occurred
the next day after I finished the editing in Adobe Premiere cs5. It might
be something wrong with the title graphics that I use, but still if there's
a solution I would like to find it out as this error occurred before.
Cristina

My z10 led flashing red when charging and even at battery full it blinks red. no green at any note..

My z10 led flashing red when charging and even at battery full it blinks red. no green at any notification. But at below 10% charging level it blinks with a combination of red and green. Please send me any settings to be changed if.. at full charged no green light is blinking.. how many colours does z10 led have..and when it works and how to make those settings..or was my led not working fine? I am worried so much..plz help me

Your LED is fine, on the Z10 there is not "network signal available" green LED, as you're accustomed to from the legacy devices. At reaching 10%, the LED will blink orange.
Red for message or applicaiton notifications.
if you want to edit and create specific LED color combination, see the third party apps such as BeBuzz or Hub++
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Red/Orange/Green indicators for ios 6 maps?

I just updated to ios 6. Every morning I check my maps app to see how the traffic looks for a couple of routes I can take to work. This morning, with ios 6, there was no information. It seems it only shows when its red. This is completely frusting because I know that both these routes can have slow "orange" patches every morning. Will they be adding red/orange/green indicators to ios 6 maps?!

We are not Apple employees and you may know that already. This is a forum for users with technical questions and problems. You are entitled to your opinions and you are entitled to be disappointed. Let Apple know how you feel.
http://www.apple.com/feedback/ipad.html

Safari 5.0.5 on windows XP SP3 green menu, green bookmarks, green status bar. Earlier it was grey. What i can do?

Safari 5.0.5 on windows XP SP3 green menu, green bookmarks, green status bar. Earlier it was grey. What i can do?
Periodical safari again grey, but after next loading safari green. Im russian, sorry for my language.

Safari 5.0.5 on windows XP SP3 green menu, green bookmarks, green status bar. Earlier it was grey. What i can do?
Periodical safari again grey, but after next loading safari green. Im russian, sorry for my language.

My iphone 3gs dont have a red and green color can you help me how to fix it

please help me my i phone dont have red and green color how to fix it

If you have the old phone, connect it to iTunes, right click on the device, and choose transfer purchases. If you no longer have the old phone, I don't believe there is a way to recover them, as they were on your original device.

HP ePrint red or green status on Android

Similar Messages

Maybe you are looking for