HP Ethernet 10Gb 2-port 530FLR-SFP Adapter

Hello!! What is the optical transceiver is needed for my work HP Ethernet 10Gb 2-port 530FLR-SFP + Adapter with Cisco Tsatalist 2960? What settings on both ustrysvah sorrektnoy necessary for operation of these devices in Aggrigate?

Hi,
At my shop, we always use auto negotiate and this will work with nearly all devices with 2, 4, 8 Gb except 1Gb. We don't use adapters, direct SFP to SFP.
Hope thie may help you a bit.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. Tried restarting the mac then only VGA adapter worked.

I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at the same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. I tried restarting the mac then only the VGA-adapter worked. I also tried to reinstall the OS.
I'm using new 13-inch MacBook Air early 2015. OS X 10.10.3.

Thanks Malcolm - Do you think it might be worth trying to flash the firmware on these cases - there seem to be updaters available on Prolific's website. Obviously I'd have to do it on a PC. I've emailed Prolific asking them about my problem. No reply as yet, and I'm not holding my breath! Do you know if there are any other posts on these boards relating to Prolific? Stupid question really - I'll just do a search...
Thanks again for your post. Cheers from Bonnie Scotland.

How do you properly seat an SFP adapter?

Sorry for such a noob question but I would love for someone to clarify...
On a fiber LC SFP adapter, there's a small arm on a hinge that turns up and down, what is that for? Are you supposed to have it in the down position, plug in the adapter then pull the arm up? Or is the arm only there to help you grip onto something to pull it out? Thanks!

To add Jon's post, it all depends on the model of your switch and the manufacturer of the SFP.
Traditionally, it doesn't matter if the arm is down or up. You insert the SFP and you are SUPPOSE TO HEAR a very soft "click", which means the lock (or claws) has engaged the slot of the port.
Now I have noticed that legacy 2960/2960G, 3560/3560G, 3750/3750G do not play right. Whether you insert the SFP with the arm down or the arm up you will seldom hear the "click". The only way to fully determine if the lock has "bitten" to the slot is to (arm up) is to pull the SFP.
Just want to warn you about SFP with a plastic arm. Just try not to use it. The plastic arms become very brittle after prolong use. When you want to remove the SFP, those plastic arms will break off and leaving your SFP stuck in the port. You'll need a small flathead s_crew driver to push the lock underneath the SFP FORWARD before you can pull the SFP out.
As of lately I have RMA-ed these infernal and confounded plastic arm SFP in excess of 80 pieces (used or even brand new). No need to worry about the new DOM ones. They come in with metal arm but the very minute I catch these SFP with plastic arms ...

Gigabit Ethernet distribution system ports

Hi,
we are using Cisco WLAN controller 5508 which have 8 Gigabit Ethernet distribution system ports. Can any one tell me how to check the model number of the gigabit Ethernet distribution system ports.
Regards,
Noman

Noman,
I’m still a little confused, sorry. Are you looking for the model of the installed SFP transceiver module or the part number of the SFP port bank itself?
Are you looking for this:
Or this:
If you want to know the transceiver module, you can look at the show port summary command. It will tell you what type of transceiver you have in there, although it won't list the exact make/model but you can figure it out. 1000BaseTX = GLC-T. 1000BaseSX = GLC-SX-MM. 1000BaseLX = GLC-LH-SM.
If you want to know the part number for the SFP bus, ports or chips themselves, then I'm at a loss for you. I guess you can take the controller apart and do a visual inspection to see if you find anything useful. Are you trying to DIY repair a dead controller or something?
Justin

Why does my mini display port to hdmi adapter cut out intermittently?

I have a MacBook Air 2012. Using a bestbuy mini display port to hdmi adapter connecting to a sony led tv. The picture and sound transmits to the tv, but the signal would cut out after 10-15 seconds and it would last about 3-5 seconds and then the picture would come back again.

to me something happened similar to me but after removing the connector and put it back was solved, and now to use it with my TV I have to make sure both are well connected to both the Mac and plug the HDMI cable and adapter tv .
I hope that solves your problems resolved as mine
Blessings.
a me me a pasado algo similar pero luego de sacar el conector y volverlo a poner se soluciono, y ahora para poder usarlo con mi TV tengo que asegurarme que esten bien conectados ambos tanto el conector al mac como el cable hdmi al tv y al adaptador.
espero que eso resuelva tus problemas como resolvio los mios
Bendiciones.

Mini Display Port to VGA adapter + Monitor Eizo s2231W = CRASH

I purchased a new macbook pro last month with 2 adapters, one for VGA the other for DVI. I'm having some trouble with the Mini-DVI to VGA adapter. The Mini Display Port to DVI adapter works well.
When I attach the VGA adapter to the monitor it works well for a couple of minutes, then I dont know why my MBP crashes and I can see a purple or white screen. The crash is really a crash... cauz I cant do anything. My mac is frozen and the only way to resuscitate him is to keep pressed the power button for a while till it turns off, and then turn it on again.
You can say... why do you need the VGA if the DVI works...
the problem is that I'm probably supposed to use it one day attached to a projector because of a presentation at university.
So I dont wanna see my new macbook pro freezing in front of my professor.
please help.
EDIT:
adding some precious information
My hardware configuration as regard the graphic chipset is
NVIDIA GeForce 320M
The resolution of the external monitor is 1620x1080
I'M NOT using the mirroring ( but the desktop extension)

I had the exact same problem. It actually escalated from there and it would crash at the startup screen (the white one with the apple and the spinning gear). The only way I was able to fix this was to reformat the entire computer. I was lucky enough to have backed up all my data when it first started crashing. I've only reformatted yesterday and things seem fine for now. I don't know what caused it, or how to fix the problem any other way.

MacBook Pro(Mid 2012) Can't connect to my Dynex TV with mini display port to VGA adapter

I have a MacBook Pro(Mid 2012, running OS X 10.9.4) and I recently just bought a mini display port to VGA adapter so I could hook it up to my dynex TV but when I connect everything my TV says no signal. Do I need to do something in settings?

Hi psikalis,
If you are having issues connecting an external display to your MacBook Pro, you may find the information and troubleshooting steps in the following articles helpful:
OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Regards,
- Brenden

I have a MacBook 5.1 and want to play movies from my computer onto my TV. I have a mini display port to DVI adapter but when I connect it to my TV nothing happens. What do I need to do?

Hi,
I have just connected my MacBook to my TV with a mini Display port to DVI Adapter which was connected ta HDMI to DVI Video Cable which I connected to my TV. I turned my TV on and my TV could not find any signal. I used the TV menu to connect to HDMI , but it said there was no signal. What do I do now?

try turning on the mirroring option and see if anything changes the following link will show you how to enable mirroring display setting
http://www.ehow.com/how_5661153_set-display-macbook-mirror.html

Will the mini display port to vga adapter work with a 2007 mac book?

will the mini display port to vga adapter work with a 2007 mac book?

I think your Macbook came with a Mini DVI port instead of a Mini Display port.

Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

No. You need a converter box like this to go with your MDP-VGA adapter:
http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2

Mini display port to HDMI adapter not working

I can not get my MacBook OS X to dispaly on my new Samsung LED TV. I have a mini display port to HDMI adapter (two years old) conneted with an HDMI cable (new) into the HDMI input on the TV. I tried both inputs, tried resetting the TV, plugging, unplugging, restarting, checked all my system preferences...I can not figure it out. I took my cables to a local store, tested the HDMI cable, and it works. Tested the adapter and they had the same problem I have on my Mac. The screen will flash blue when you plug it in, but will not show up in the TV. I think the adapter must be bad, nothing else makes sense???

Hi Kater24,
Apple doesn't make a Mini DisplayPort to HDMI adapter, so the one you've got there is a 3rd party one that's designed to work with the Mini DisplayPort on your Apple computer. The adapter is pretty much plug-n-play, there's no configuration necessary. Plug it into the machine, the HDMI cable from the other end of the adapter into your TV, select the HDMI input on your TV and fire up the computer.
If that's not working it's possibly an issue with the adapter and/or cable to the TV. Any chance you might have access to another TV for troubleshooting purposes?

Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck.

I have a Samsung HD TV and I purchased a Mini Display port to HDMI Adapter today. For some strange reason I get no display on my HD tv. I even tried switching a few HDMI cables and nothing popped up. I made sure my computer was updated. Help pls

I have a Samsung HD TV and I purchased a Mini Display port to HDMI Adapter today. For some strange reason I get no display on my HD tv. I even tried switching a few HDMI cables and nothing popped up. I made sure my computer performed all software updates, and I even tried calling Apple Support. They just told me to keep trying different hdmi cables and see if anything pops up. Does anybody know what the problem is? My HDMI cable is from "rocketfish" also my display port is too.

You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

HP Ethernet 10Gb 2-port 530FLR-SFP Adapter

Similar Messages

Maybe you are looking for