HP Experts - dm3 Switchable graphics and a lack of bios functionality

I currently own a dm3-1155ea with a switchable integrated 3200 and discrete 4330. I chose to put fedora 14 on my laptop which, when using proprietary graphics drivers (which are pretty much required for anything resembling battery life) only allow you to use the integrated graphics. Wishing to use the 4330, I ventured into the bios only to find a distinct lack of... Well, anything useful.
I've talked to customer support and they've confirmed that the functionality to turn off the integrated graphics exists, but has been deliberately disabled... Why? I understand hiding voltages and stuff or perhaps implementing a hidden yet accessible advanced bios for more advanced users, but doesn't it seem a little excessive completely blocking access to useful features? Features that are presumably there to solve little problems like mine...
So yeah, my question is really why so stingy with the bios features? Also, if you have any alternative suggestions about the switchable graphics in linux issue, I'd welcome them
Thanks
This thread covers a similar topic and contains additional details - http://h30434.www3.hp.com/t5/Notebook-Hardware/HP-I-need-you-to-support-your-Hardware/td-p/369867

I also have a laptop with switchable graphics but Intel integrated and ATI 3400 discrete. I run Kubuntu Linux 10.10 and cannot get the ATI proprietary drivers to work properly. My laptop is a Lenovo and it gives BIOS support to set the graphics all integrated, all dedicated or switchable and you can also turn off OS support for switchable. The only way Linux works right for me is to turn off OS support for switchable. Then I can set it to either all integrated or all dedicated. Windows 7 64 bit can run either graphics system, but Linux only sees and works off the integrated graphics, even if the BIOS is set to dedicated! I have no complaint as I still have OpenGL support at least at  a minimal level (can run tuxracer). But if I try to install the add-on proprietary ATI driver I get the Linux equivalent of a blue screen....garbled pixellated log-in screen.

Similar Messages

  • Windows 7 64-bit: Switchable graphics and Ricoh card reader problem

    Hi guys,
    Two problems with my laptop. I'm using a T400, previously installed with Windows Vista Business 32-bit.
    Switchable graphics worked well until I formatted and installed Windows 7 Pro 64-bit (I got the RTM through MSDNAA). Now, Windows can only detect either the discrete graphics or integrated graphics at one time. When the BIOS was set to switchable graphics and enabling the detection of switchable graphics on Windows, it could only detect the Intel integrated graphics. When I try to switch to High Performance graphics through the Lenovo power manager, the screen flashes once, and the ATi graphics card appears on the device manager with the code 10 error (cannot start device). Also, compared to this image, my power manager window that opens with left-click does not have battery stretch and switchable graphics options. I have to right-click to switch my graphics.
    After some tinkering, I managed to activate the graphics card through the BIOS by switching it to discrete graphics only and disabling switchable graphics detection by Windows. Now the device manager shows the ATi card only, the Intel integrated graphics is gone. I understand that it should show both display adapters in the device driver when the ATi card is active: http://www-307.ibm.com/pc/support/site.wss/MIGR-70495.html#g4
    The second problem is with the Ricoh card reader. I managed to install the drivers properly, but the device shows up with a code 12 error (This device cannot find enough free resources that it can use) in the device manager. That error appears on 6 items in the device manager:
    Ricoh Memory Stick controller
    Ricoh SD/MMC Host controller
    Ricoh xD-Picture card controller
    Ricoh 1394 OHCI Compliant host controller
    Ricoh R/RL/5C476(II) or Compatible CardBus controller
    SDA Standard Compliant SD host controller
    Additionally, 6 error messages appear during every boot up, which I think is related to these 6 devices:
    ERROR
    Resource Conflict - PCI in slot 07
    Bus:15, Device:00, Function: 00 (it ranges from function 00  to 05)
    AND disabling the device through device manager results in a BSOD.
    I've seen some people post about the Ricoh problem, but didn't have any resolution (at least for those who had the boot up error message too). The switchable graphics problem seems quite common too but in my case it seems like it is working fine EXCEPT for the fact that only one graphics adapter can appear on the device manager at one time and I can't do switching at all. Anyone know if I can somehow solve this? Sorry for the wall of text and two-problems-in-one. I put them together because I don't know if one problem is affecting the other as both problems appeared at around the same time.

    As far as the graphics goes it's well accpeted the only way at present to switch is though the bios manually. There is currently no drivers that enable users to switch from within Win7. Know it's a pain but will just have to wait.

  • Disabling switchable graphics for windows 7

    Hi experts,
    I am using a 4gb T400 and I am trying to free up the memory by disabling the switchable graphics in the bios change it to discrete graphics. and yet I still cant get close to a 3gb memory on my 32 bit Windows 7. I have seen in this forum they have done it but I cant seems able to get mine close to that. Is there anything else I can do !?
    I have reboot a few times between integrated graphics and descrete graphics, to try to free the memory but to no avail. Pls any1, is there anything I have missed out.
    Solved!
    Go to Solution.

    boot into BIOS with F1
    Enter Config->Display->
    Switch OS detection to Disable.
    boot into OS
    uninstall Switchable graphics driver from unitl and install ATI driver from ->
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73641
    reboot system.
    more info on switchable graphics and why you were having the problem on unit
    http://www-307.ibm.com/pc/support/site.wss/MIGR-70495.html#g5
    hopefully this solves the problem. 
    tell me if that fixes the issue for you.

  • Serious W7 Bug - ALL ATi Drivers for Thinkpads /w Switchable Graphics Technology bricks OS.

    Alas, i have found one serious bug for my Thinkpad.
    It comes with Switchable Graphics Card Technology, with an Intel GMA 4500MHD and ATi Mobility Radeon 3470 paired together.
    I have initially installed Pre-RTM 7260(ok, i know it's leaked), and faced the problem for the first time after installing the ATi drivers from either Windows Update OR ATi's website. However i have downgraded back to Release Candidate as there was stability issues with EXPLORER.exe
    Anyway, surprising what i've though to be a show-stopper bug was also present in RC 7100. After installing(or rather, midway through) the driver installation, the screen blinks for a moment and after that, Explorer.exe is nowhere to be found with only wallpaper. OS seems to be bricked as restart does nothing. Only a System Restore prior to installation would solve the issue.
    After diagnosing the problem, i have found the issue to be with the Switchable Graphics Card system. In BIOS, it was set to Swithable Graphics, with OS Detection set to Enabled, Thinkpad LCD Display(for output). I tried to set the graphics to either Discrete(ATi) or Integrated(Intel) but when i booted the system up it was in SVGA resolution and DXDIAG stating no graphics found. When it was in Discrete, i tried to install the ATi drivers once again, and although installation was successful, after restarting the same thing happened.
    To be fair, i have repeated the drivers installation EXACTLY the same for both Windows 7 Builds(7100 RC and 7260 Pre-RTM) and the same problem occured. I have also tried to install the ATi drivers before the Intel Chipset(and basically the rest) and it's the same nevertheless.
    I believe that this is a serious issue with Switchable Graphics Technology for Windows 7 Beta, since we have to make do with the generic Microsoft display adapter alone. I hope Lenovo engineers can put priority a solution for this as soon as possible.
     http://img269.imageshack.us/my.php?image=47492934.png
    This is Dxdiag after i set other options than Switchable Graphics
     http://img30.imageshack.us/my.php?image=error3yyt.png
    http://img41.imageshack.us/my.php?image=error2k.png
    This is my updates.
    PS: The Ati card is showing a triangle icon in Device Manager too, but i guess updating it brings the same bricking result.
    Error msg "This device cannot start. (Code 10)"
    Message Edited by ceecookie on 06-22-2009 07:07 AM
    Message Edited by ceecookie on 06-22-2009 07:08 AM
    Message Edited by ceecookie on 06-22-2009 07:41 AM

    Sorry to hear you are having difficulties.
    When I installed RC1 (build 7100), it came with a built-in driver that worked just fine for the discrete graphics in my W500.
    A few weeks later, I installed the current release Vista driver for integrated graphics (this one) and it is working just fine as well.  Installing the Lenovo driver gave me the ATI control panel (not sure what use that is), otherwise, it didn't affect performance either way.
    I have switchable graphics turned off in the BIOS, OS detection turned off, and have the machine set to use the discrete graphics only.  I think it would be a bit much to expect either Microsoft or Lenovo to support the switchable graphics this early in the development of Windows 7.  Besides, the discrete graphics doesn't eat up the battery that much - I still get 3 hours of battery life, which is sufficient for my needs.
    Maybe try turning switchable graphics and switchable graphics detection off in your BIOS, that might get you running again.
    Michael
    W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

  • How to open sounds and audio properties using Labview function

    Hi All,
    How to open the sounds and audio properties of the control panel using the Labview system exe vi.
    Is there any dll also to open this property.
    If there is dll which is that and how to program the dll to serve my purpose.
    Solved!
    Go to Solution.

    Have you looked at the "Graphics and Sounds" section within the Functions Palette (Block Diagram)? There are VI's that already exist for this.
    R
    Message Edited by JoeLabView on 09-04-2008 07:44 AM
    Attachments:
    sounds.PNG ‏12 KB

  • Pavilion dm3 AMD switchable graphics (HD4000&HD5000) in Windows 10 Technical Preview

    Basically it is a continuation of my previous topic:
    http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Pavilion-dm3-AMD-switchable-graphics-HD4000-...
    Users of HP laptops with switchable graphics HD4000/HD5000 will face the same problem after upgrade to Windows 10.
    The earlier we'll start to discuss and find the solution for this sort of laptops the higher chance that we will be able to use our laptops in Windows 10.
    I use Windows 10 Technical Preview now and I try to find the correct driver for my laptop.

    Hello there mate got g510 iam on windows 10 insider preview build 10159 and it runs smooth! about the driver thingy i found it the most easy to do beyond all the other devices out there  all u have to do is downlaod and install the last build from here : https://mega.nz/#!hUc2SSDI!9VRPiak8tS90rKbbVEEA0MCn5QbI8YgWRA_gCkFmcrY make sure to clean install it by 8gb at least flash driver and u are good to go ps: upgrading from older builds can make crashes and black screens after the amd driver installed so just make clean install for ur own good after u are done u can check for windows updates and it will take the intel and amd drivers that supports the wddm 2.0 plus the conexant audio and bluetooth ,Elan touchpad ,  the last stable ones comes with the updates and trust me its the most stable ones ive used so far the remaining unknown device and the pci is for the power manager and the intel imanagement engine u can use windows 8.1 x64 drivers for those sorry for the bad english tho xD  

  • Windows 7 RTM x64 Power Manager and switchable graphics not working

    Installed Windows 7 RTM x64 on my T400. After windows update and installing Lenovo's drivers, everything is accounted for. ATI graphics works fine, and I can see the Intel graphics on the shortcut menu. I just cannot manually switch to the built-in graphics, nor did I see the Power Manager. What do I need to do? I have installed the drivers for the power management, even though on the list of driver on lenovo's webpage it says it's only for SL models.
    Help would be appreciated.
    Specs:
    T400
    LED
    ATI/Intel switchable graphics
    4Gb

    Have you installed the Power manager http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html#powm ?
    And after that, make sure you have installed the right driver (the one for switchable graphics): http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html#m8xswitch
    Hope that helps.
    I also have Windows 7 Professional x64 on my T400 and everything works fine (i only uses programs and driver from here: http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html
    T400 2767-AG8
    Windows 7 Professional 64bit

  • Windows 7 and switchable graphics stays in "Energy Saving" mode

    I installed the latest switchable graphics drivers from Lenovo, and I can't switch to High Performance mode.  It always uses my integrated graphics even when I try to select it from the power manager battery menu.
    I tried updaing to power manager 3.25 and the latest bios, but still the same issue.  anyone have any solutions?

    try right clicking the batter icon>go to switchable graphics>high performance.
    T400
    Intel® Core™2 Duo T9400 2.53 GHz__Windows 7 Professional__3GB Memory__160GB, 7200RPM Hard Drive__14.1” WXGA+TFT-CFL__ATI Mobility Radeon™ HD 3470--

  • U330 + Windows 7 and Switchable Graphics Issue

    Just installed the beta version of Windows 7. Only problem I'm having is dealing with switchable graphics. Can't really get it to switch between graphics card. I think it's using ATI which is drawing too much power. Anyone know a way around this? I don't expect this laptop to support Windows 7 yet but it's nice if anyone got any answers.

    Maybe right, even if Windows 7 is just a rebuild of Vista kernel and such. When I try to switch to performance I notice the USB device connected sound. And the disconnection sound right away (0,1sec later). I hope lenovo will support Win7 on our laptops too

  • Windows 8.1 and AMD radeon HD 6700m switchable graphics on HP pavilion dv7

    Hello all
    First would like to give positive feedback because my former problem was solved here but this thing appears again.
    I have HP pavilion dv 7
    i7 -2670QM (2.20ghz)
    (8 GB Ram)
    Windows 8.1
    So my problem is with the switchable graphic as it is stated in the subject.
    I had windows 7 previously and I had no problems with switchable graphics-
    When I bought licenced win 8 the problems started and are continuing in my 8.1 upgrade.
    I tried several thing, from turning off switchable mode in BIOS, turn it off in win desktop, uninstalling drivers or blocking drivers and it still doesn't help
    It's a shame that with a computer like this I can't play a bit better games that I was able to when I had win7.
    The main problem is that when the game instals it checks your computer and tell you if it's ok or not-and everytime I get that I have intel HD3000 graphics. and not AMD radeon hd 6700m graphic card.
    Can anybody tells me how to fix this thing? I don't have any problems in display adapter-all drivers are good to go, i have the latest amd catalyst software.
    It would be a shame to buy win 8 if 7 was good and better working on this issue.
    Thank you for help

    Hello again GregaSlo,
    It is good to hear from you again!
    To prevent your system from crashing, and gain access to your fingerprint reader, I recommend performing a backup and recovery of your system's operating system. This can be done by following this document on Backing Up Your Files (Windows 7), as well as Performing an HP system recovery (Windows 7). This should help recover your system back to factory defaults.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Do I have switchable graphics or not?And led screen.

    Hello!
    I can't find if my t400 has switchable graphic or not.
    I would also like to know if i got LED screen or not.
    My model number is: 6475-WHR
    Please help.

    Hello!
    I can't find if my t400 has switchable graphic or not.
    I would also like to know if i got LED screen or not.
    My model number is: 6475-WHR
    Please help.

  • HP computers with Intel and ATI/AMD switchable graphics

    Hi,
    Product Name: HP Pavilion dv6-6093ex
    Product Number : LM610EA#A2N
    From HP website, I have downloaded :
    'ATI Radeon Graphics Driver_ Software Packaging Number()_Driver Packaging Version 8.810.4.1000(2010)'
    'AMD High-Definition Graphics Driver_ Software Packaging Number(SP55092)_Driver Packaging Version 8.882.2.3000'
    I have installed a new version of Windows 7, and then got these adapters before installing any drivres::
    I have installed  ''ATI Radeon Graphics Driver_ Version 8.810.4.1000".  However, while  installing ''ATI Radeon Graphics Driver' packaging version  8.810.4.1000(2010)'  on my laptop, I found that that  'ATI adapter driver' is in the packgage as in this screen shot.
    Then, after installation completed, the device manager was:
    I have  removed the existing drivers to where I have it down to 2 VGA adapters and the big icon screen I describe in the first screen shot, then install the 'AMD High-Definition Graphics Driver_ Software Packaging Number(SP55092)_Driver Packaging Version 8.882.2.3000'.
    However, when I have installed 'AMD High-Definition Graphics Driver_ Software Packaging Number(SP55092)_Driver Packaging Version 8.882.2.3000',  I found that  AMD adpater driver is in the packgage as in this screen shot.
    After installation completed, then the device manager became:
    If we make a comparission between two installations, we will find that
    In the first installation:
    Mobile Intel(R) HD Graphics
    Radeon(TM) HD 6770M.
    In the second installtion:
     Intel(R) HD Graphics Family.
    Radeon(TM) HD 6770M.
    Thus, my question is as follows:
    First: is there any difference between 'Mobile Intel(R) HD Graphics' and 'Intel(R) HD Graphics Family.'
    Second: Why is 'ATI Adapter driver'  shown in the first installation, and in the second "AMD adapter driver", however,  in either instllation,  'Radeon(TM) HD 6770M'  and 'Intel graphics' were installed? In other words, neither 'ATI' is listed in the device manager nor 'AMD'  listed on the device manager.

    Thanks a lot,
     you asked me about sending my SN before and now you are asking me about  what  the Guest machine model I have is. I think   the Guest machine model will do nothing with what I am looking for. No problem with   the Guest machine model I have if you have a look again at that thread of mine.
    But I am really so afraid to say that you  didn't take some of your precious time out to either read my enquiry in this thread or in the other one mentioned to at this thread.
    Also, if you checked again my firt post, you will see that I've been asking why while I was installing ATI Radeon Graphics, there was ATI adapter driver.
    However, when I was installing 'AMD HIgh Definitioni Graphics', there was 'AMD adapter driver'
    Simply, if you have kindly a look again at my very post at this thread you understand me well that I don't have any problem with installing the latest AMD driver found in HP website, however, all AMD drivers found in HP website are not newer than what I downloaded two yeras and a half ago.
    I think that  HP people don't keep abreast with updating their drivers and software.
    I  downloaded my drivers and software form HP about two years and a half ago, but when I now visited the HP website, I found no drivers newer than what I downloaded two years and a half.

  • ATI Mobility Radeon HD 6370 switchable graphics driver

    Is there any way to get a new driver for the ATI Mobility Radeon HD 6370 switchable graphics card? I have a HP Pavilion dv7-4276nr Entertainment Notebook PC and the latest driver I can download from HP are from 2010!! Lots of games are not running properly because of the lack of updated drivers and I cannot download them from de ATI page since they wont work. Please tell me if there is any other place from where I can download a more updated driver. Thanks in advance.

    @stormsfury 
    I understand that you are looking for help with disabling the more powerful GPU on your notebook.
    I did some searching and found a few posts on this matter, by a few of the HP forum experts. Check through these pages:
    how to disable switchable graphics
    Disabling switchable graphics or setting global default.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Problem with switchable graphic cards after installing windows 10

    Dear support, after installing windows 10 i lost option to switch my graphic cards. I already have installed new drivers for win10 64-bit. But it doesn't work. New drivers which i downloaded here: http://support.amd.com/en-us/download/desktop?os=Windows+10+-+64 doesn't support my graphic card. So i don't know what to do to get right drivers and be able to switch my graphic cards. Thanks for any help.

    Hi there 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you installed Windows 10 and that switchable graphics is not working for you. I am happy to help. Unfortunately this is not something that AMD can help with, as it is a customized driver for your notebook. Did you do the Windows 10 installation as an upgrade and if so which operating system did you upgrade from? The existing HP drivers can be found here: HP Pavilion g6-1004ev Notebook PC but they are for Windows 7 or 8 depending on your choices. You could try those and install it using compatibility mode and see if that works. How to: Install and Update drivers in Windows 10 - answers.microsoft.com Let me know if that works for you.

  • AMD 5650/Intel switchable graphics setup configuration woes

    I was wondering if someone could help me with my POS HP DV7-4100 ATI Radeon 5650/Intel switchable graphics setup.  I'm so annoyed with this and don't know how to proceed but it looks like I'm not completing the configuration properly.
    I have tried seemingly everything so far: 
    Catalyst w/ Catalyst-utils
    Catalyst-hook
    Catalyst w & w/out utils-pxp
    Catalyst-total-pxp
    Anyway, loading catalyst without xorg.conf seems to get me the closest to a working setup but once I log into Cinnamon, I get a message saying that it has loaded in fallback mode and if I would like to try to restart cinnamon (nothing happens).
    This leads me to believe that this is a config issue.
    This is the dmesg without an xorg.conf file.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
    [ 0.000000] [mem 0x25be00000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
    [ 0.000000] [mem 0x258000000-0x25bdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
    [ 0.000000] [mem 0x200000000-0x257ffffff] page 2M
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x9b5fffff] page 2M
    [ 0.000000] [mem 0x9b600000-0x9b63efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] [mem 0x9b7ff000-0x9b7fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000009b75e000 00040
    [ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
    [ 0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
    [ 0.000000] NODE_DATA [mem 0x25bff5000-0x25bff9fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25bffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
    [ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] node 0: [mem 0x200000000-0x25bffffff]
    [ 0.000000] On node 0 totalpages: 2045404
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9881 pages used for memmap
    [ 0.000000] DMA32 zone: 632384 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22272 pages used for memmap
    [ 0.000000] Normal zone: 1409024 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
    [ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013166
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7968736K/8181616K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2527.100 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.79 BogoMIPS (lpj=8423666)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000033] Security Framework initialized
    [ 0.000044] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000045] Yama: becoming mindful.
    [ 0.000537] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002402] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003219] Mount-cache hash table entries: 256
    [ 0.003418] Initializing cgroup subsys memory
    [ 0.003430] Initializing cgroup subsys devices
    [ 0.003432] Initializing cgroup subsys freezer
    [ 0.003434] Initializing cgroup subsys net_cls
    [ 0.003435] Initializing cgroup subsys blkio
    [ 0.003456] CPU: Physical Processor ID: 0
    [ 0.003457] CPU: Processor Core ID: 0
    [ 0.003463] mce: CPU supports 9 MCE banks
    [ 0.003473] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003483] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003568] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.004537] ACPI: Core revision 20130725
    [ 0.013846] ACPI: All ACPI Tables successfully acquired
    [ 0.038849] ftrace: allocating 20318 entries in 80 pages
    [ 0.048808] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.081797] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
    [ 0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.187283] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.187285] ... version: 3
    [ 0.187286] ... bit width: 48
    [ 0.187287] ... generic registers: 4
    [ 0.187288] ... value mask: 0000ffffffffffff
    [ 0.187288] ... max period: 000000007fffffff
    [ 0.187289] ... fixed-purpose events: 3
    [ 0.187290] ... event mask: 000000070000000f
    [ 0.660504] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.647139] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.700394] Brought up 4 CPUs
    [ 0.700400] smpboot: Total of 4 processors activated (20224.16 BogoMIPS)
    [ 0.702976] devtmpfs: initialized
    [ 0.705408] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
    [ 0.706249] RTC time: 18:58:44, date: 01/06/14
    [ 0.706292] NET: Registered protocol family 16
    [ 0.706388] cpuidle: using governor ladder
    [ 0.706389] cpuidle: using governor menu
    [ 0.706414] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.706416] ACPI: bus type PCI registered
    [ 0.706418] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.706482] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.706485] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
    [ 0.713484] PCI: Using configuration type 1 for base access
    [ 0.714057] bio: create slab <bio-0> at 0
    [ 0.714171] ACPI: Added _OSI(Module Device)
    [ 0.714172] ACPI: Added _OSI(Processor Device)
    [ 0.714174] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.714175] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.715777] ACPI: EC: Look up EC in DSDT
    [ 0.723731] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.729362] ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.729739] ACPI: Dynamic OEM Table Load:
    [ 0.729741] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.729882] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.730243] ACPI: Dynamic OEM Table Load:
    [ 0.730245] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.750624] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.751035] ACPI: Dynamic OEM Table Load:
    [ 0.751037] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.760515] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.760902] ACPI: Dynamic OEM Table Load:
    [ 0.760904] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.813748] ACPI: Interpreter enabled
    [ 0.813763] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.813769] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.813788] ACPI: (supports S0 S3 S4 S5)
    [ 0.813790] ACPI: Using IOAPIC for interrupt routing
    [ 0.813825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.813932] ACPI: No dock devices found.
    [ 1.447844] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
    [ 1.447876] \_SB_.PCI0:_OSC invalid UUID
    [ 1.447877] _OSC request data:1 8 0
    [ 1.447907] \_SB_.PCI0:_OSC invalid UUID
    [ 1.447908] _OSC request data:1 1f 0
    [ 1.447911] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.447913] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.448565] ACPI: \_SB_.PCI0.ACEL: can't evaluate _ADR (0x5)
    [ 1.448567] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 1.448573] PCI host bridge to bus 0000:00
    [ 1.448575] pci_bus 0000:00: root bus resource [bus 00-7e]
    [ 1.448577] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.448578] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.448580] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.448581] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
    [ 1.448589] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    [ 1.448606] DMAR: Disabling batched IOTLB flush on Ironlake
    [ 1.448669] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
    [ 1.448699] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.448735] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.448767] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    [ 1.448778] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 1.448783] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.448787] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
    [ 1.448892] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 1.448920] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
    [ 1.449016] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.449101] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 1.449515] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
    [ 1.451973] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.452031] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.452072] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 1.452093] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
    [ 1.452188] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.452234] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.452267] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 1.452365] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.452412] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.452444] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 1.452541] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.452588] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.452634] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 1.453043] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
    [ 1.455490] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.455548] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.455583] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 1.455686] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 1.455720] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
    [ 1.455888] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
    [ 1.455915] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
    [ 1.455926] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
    [ 1.455937] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
    [ 1.455947] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
    [ 1.455958] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
    [ 1.455969] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
    [ 1.456035] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.456106] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 1.456126] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
    [ 1.456155] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
    [ 1.456246] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    [ 1.456272] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
    [ 1.456465] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
    [ 1.456479] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.456489] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
    [ 1.456496] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
    [ 1.456507] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    [ 1.456544] pci 0000:01:00.0: supports D1 D2
    [ 1.456587] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
    [ 1.456603] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
    [ 1.456673] pci 0000:01:00.1: supports D1 D2
    [ 1.456730] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.456732] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.456735] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.456738] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.456862] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
    [ 1.456921] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
    [ 1.457132] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.466741] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.466749] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.466756] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.466765] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.466869] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.466888] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.466916] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
    [ 1.466934] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
    [ 1.466946] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 1.467011] pci 0000:03:00.0: supports D1 D2
    [ 1.467012] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.467054] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 1.476687] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.476695] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.476702] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.476712] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.476826] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    [ 1.476839] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.476840] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.476842] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.476843] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
    [ 1.477284] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.477332] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.477378] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.477428] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.477474] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.477521] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.477569] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.477615] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.680263] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
    [ 1.680266] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.680268] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.680328] PCI host bridge to bus 0000:7f
    [ 1.680331] pci_bus 0000:7f: root bus resource [bus 7f]
    [ 1.680335] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
    [ 1.680372] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
    [ 1.680411] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
    [ 1.680444] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
    [ 1.680478] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
    [ 1.680511] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
    [ 1.680856] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 1.680862] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.680897] ACPI: \_SB_.CPBG: notify handler is installed
    [ 1.680908] Found 2 acpi root devices
    [ 1.680944] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.681029] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.681034] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.681036] vgaarb: loaded
    [ 1.681036] vgaarb: bridge control possible 0000:01:00.0
    [ 1.681037] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.681073] PCI: Using ACPI for IRQ routing
    [ 1.685883] PCI: pci_cache_line_size set to 64 bytes
    [ 1.685985] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 1.685987] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
    [ 1.685988] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
    [ 1.686076] NetLabel: Initializing
    [ 1.686077] NetLabel: domain hash size = 128
    [ 1.686078] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.686090] NetLabel: unlabeled traffic allowed by default
    [ 1.686116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.686121] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.688150] Switched to clocksource hpet
    [ 1.692075] pnp: PnP ACPI init
    [ 1.692093] ACPI: bus type PNP registered
    [ 1.692220] pnp 00:00: [dma 4]
    [ 1.692249] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.692269] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.692384] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.692417] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.692471] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 1.692473] system 00:04: [io 0x0800-0x080f] has been reserved
    [ 1.692475] system 00:04: [io 0xffff] has been reserved
    [ 1.692477] system 00:04: [io 0xffff] has been reserved
    [ 1.692479] system 00:04: [io 0x0400-0x047f] could not be reserved
    [ 1.692480] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.692482] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 1.692484] system 00:04: [io 0x0380-0x038e] has been reserved
    [ 1.692487] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.692512] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.692543] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.692578] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.692691] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.692891] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.692893] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.692895] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.692897] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.692899] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
    [ 1.692900] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.692905] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.692906] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.692908] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
    [ 1.692911] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.891768] pnp: PnP ACPI: found 10 devices
    [ 1.891775] ACPI: bus type PNP unregistered
    [ 1.898277] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 1.898281] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 1.898320] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
    [ 1.898323] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.898326] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.898328] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.898331] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.898334] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.898337] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.898343] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.898347] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.898355] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
    [ 1.898356] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.898359] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.898365] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.898369] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.898376] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 1.898391] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.898392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.898394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.898395] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.898397] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.898399] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
    [ 1.898400] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.898402] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 1.898403] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
    [ 1.898405] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.898406] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 1.898408] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
    [ 1.898409] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.898411] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 1.898413] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 1.898414] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.898416] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.898448] NET: Registered protocol family 2
    [ 1.898658] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.898905] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.899101] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.899137] TCP: reno registered
    [ 1.899150] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.899184] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.899281] NET: Registered protocol family 1
    [ 1.899297] pci 0000:00:02.0: Boot video device
    [ 1.924902] PCI: CLS 64 bytes, default 64
    [ 1.924949] Unpacking initramfs...
    [ 1.973386] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
    [ 1.973392] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.973394] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
    [ 1.973427] Simple Boot Flag at 0x44 set to 0x1
    [ 1.973607] Scanning for low memory corruption every 60 seconds
    [ 1.973892] audit: initializing netlink socket (disabled)
    [ 1.973905] type=2000 audit(1389034724.406:1): initialized
    [ 1.984356] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.985602] zbud: loaded
    [ 1.985767] VFS: Disk quotas dquot_6.5.2
    [ 1.985802] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.985955] msgmni has been set to 15569
    [ 1.986298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.986347] io scheduler noop registered
    [ 1.986349] io scheduler deadline registered
    [ 1.986371] io scheduler cfq registered (default)
    [ 1.986564] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.986816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.986829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.986868] vesafb: mode is 1600x900x32, linelength=6400, pages=0
    [ 1.986869] vesafb: scrolling: redraw
    [ 1.986870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.987210] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
    [ 2.194780] Console: switching to colour frame buffer device 200x56
    [ 2.401807] fb0: VESA VGA frame buffer device
    [ 2.401818] intel_idle: MWAIT substates: 0x1120
    [ 2.401819] intel_idle: v0.4 model 0x25
    [ 2.401820] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.401952] GHES: HEST is not enabled!
    [ 2.402009] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.402448] Linux agpgart interface v0.103
    [ 2.402509] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.424294] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.424318] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.424413] mousedev: PS/2 mouse device common for all mice
    [ 2.426083] rtc_cmos 00:05: RTC can wake from S4
    [ 2.426226] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.426258] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.426312] drop_monitor: Initializing network drop monitor service
    [ 2.426376] TCP: cubic registered
    [ 2.426451] NET: Registered protocol family 10
    [ 2.426607] NET: Registered protocol family 17
    [ 2.426615] Key type dns_resolver registered
    [ 2.426872] registered taskstats version 1
    [ 2.427642] Magic number: 14:769:998
    [ 2.427665] pnp 00:00: hash matches
    [ 2.427763] rtc_cmos 00:05: setting system clock to 2014-01-06 18:58:45 UTC (1389034725)
    [ 2.427806] PM: Hibernation image not present or could not be loaded.
    [ 2.428656] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 2.428658] Write protecting the kernel read-only data: 8192k
    [ 2.430898] Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
    [ 2.431903] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 2.444295] systemd-udevd[57]: starting version 208
    [ 2.454799] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.473820] SCSI subsystem initialized
    [ 2.474804] ACPI: bus type USB registered
    [ 2.474841] usbcore: registered new interface driver usbfs
    [ 2.474855] usbcore: registered new interface driver hub
    [ 2.474933] usbcore: registered new device driver usb
    [ 2.474994] libata version 3.00 loaded.
    [ 2.475610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.475775] ehci-pci: EHCI PCI platform driver
    [ 2.475950] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.475967] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.475975] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.475992] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.479915] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.479939] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
    [ 2.487831] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.488136] hub 1-0:1.0: USB hub found
    [ 2.488148] hub 1-0:1.0: 3 ports detected
    [ 2.488623] ahci 0000:00:1f.2: version 3.0
    [ 2.488766] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.488870] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 2.488874] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
    [ 2.488880] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.508305] scsi0 : ahci
    [ 2.508478] scsi1 : ahci
    [ 2.508661] scsi2 : ahci
    [ 2.508872] scsi3 : ahci
    [ 2.509076] scsi4 : ahci
    [ 2.509232] scsi5 : ahci
    [ 2.509314] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
    [ 2.509319] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
    [ 2.509322] ata3: DUMMY
    [ 2.509324] ata4: DUMMY
    [ 2.509328] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
    [ 2.509332] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
    [ 2.509617] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.509640] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.509655] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.509681] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.513619] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.513636] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
    [ 2.521138] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.521432] hub 2-0:1.0: USB hub found
    [ 2.521446] hub 2-0:1.0: 3 ports detected
    [ 2.794491] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.827773] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.827866] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.830049] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
    [ 2.831101] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.831251] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
    [ 2.831257] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 2.832374] ata2.00: configured for UDMA/100
    [ 2.834382] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.841297] ata1.00: configured for UDMA/133
    [ 2.841651] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F60 2.0 PQ: 0 ANSI: 5
    [ 2.842799] scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
    [ 2.918525] hub 1-1:1.0: USB hub found
    [ 2.918713] hub 1-1:1.0: 6 ports detected
    [ 2.974340] tsc: Refined TSC clocksource calibration: 2527.281 MHz
    [ 3.024393] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 3.148413] hub 2-1:1.0: USB hub found
    [ 3.148604] hub 2-1:1.0: 8 ports detected
    [ 3.227872] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
    [ 3.231028] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
    [ 3.231032] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 3.232183] ata5.00: configured for UDMA/100
    [ 3.232540] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
    [ 3.236887] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [ 3.236939] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.236941] sd 4:0:0:0: [sdb] 4096-byte physical blocks
    [ 3.237016] sd 4:0:0:0: [sdb] Write Protect is off
    [ 3.237019] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 3.237035] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.237040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.237050] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.237086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.237518] sda: sda1 sda2 sda3 sda4
    [ 3.237920] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.237923] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.237954] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.238066] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.280297] sdb: sdb1 sdb3
    [ 3.281140] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 3.320840] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.324133] usbcore: registered new interface driver usbhid
    [ 3.324137] usbhid: USB HID core driver
    [ 3.324888] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
    [ 3.325079] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.1/input0
    [ 3.384362] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
    [ 3.550965] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
    [ 3.714287] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
    [ 3.795307] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.853249] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.854872] systemd[1]: Set hostname to <HP-DV7>.
    [ 3.858373] systemd-fstab-generator[118]: Mount point swap is not a valid path, ignoring.
    [ 3.909882] systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
    [ 3.910099] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.910161] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.910174] systemd[1]: Starting Login Prompts.
    [ 3.910186] systemd[1]: Reached target Login Prompts.
    [ 3.910195] systemd[1]: Starting Remote File Systems.
    [ 3.910203] systemd[1]: Reached target Remote File Systems.
    [ 3.910213] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.910241] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.910250] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.910267] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.910276] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.910299] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.910309] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.910330] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.910359] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.910451] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.910465] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.910492] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.910501] systemd[1]: Starting Paths.
    [ 3.910535] systemd[1]: Reached target Paths.
    [ 3.910550] systemd[1]: Starting udev Kernel Socket.
    [ 3.910571] systemd[1]: Listening on udev Kernel Socket.
    [ 3.910582] systemd[1]: Starting udev Control Socket.
    [ 3.910602] systemd[1]: Listening on udev Control Socket.
    [ 3.910612] systemd[1]: Starting Journal Socket.
    [ 3.910647] systemd[1]: Listening on Journal Socket.
    [ 3.910661] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.911488] systemd[1]: Starting Apply Kernel Variables...
    [ 3.911775] systemd[1]: Mounting Huge Pages File System...
    [ 3.912052] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.914336] systemd[1]: Starting Load Kernel Modules...
    [ 3.919413] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.920515] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.920540] systemd[1]: Starting Journal Service...
    [ 3.920857] systemd[1]: Started Journal Service.
    [ 3.934908] systemd-journald[130]: Vacuuming done, freed 0 bytes
    [ 3.936662] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 3.936668] ACPI: Power Button [PWRB]
    [ 3.936710] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 3.937069] ACPI: Lid Switch [LID0]
    [ 3.937129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 3.937132] ACPI: Power Button [PWRF]
    [ 3.938040] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 3.938042] AMD IOMMUv2 functionality not available on this system
    [ 3.968968] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 3.974125] Switched to clocksource tsc
    [ 3.990703] systemd-udevd[155]: starting version 208
    [ 3.994113] systemd-journald[130]: Received request to flush runtime journal from PID 1
    [ 4.011409] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 4.011415] Disabling lock debugging due to kernel taint
    [ 4.022291] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
    [ 4.022509] <6>[fglrx] vendor: 1002 device: 68c1 count: 1
    [ 4.022812] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
    [ 4.022823] pci 0000:01:00.0: enabling device (0000 -> 0003)
    [ 4.023031] <6>[fglrx] Kernel PAT support is enabled
    [ 4.023051] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
    [ 4.092258] ACPI: Requesting acpi_cpufreq
    [ 4.101543] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 4.101553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101558] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101563] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101568] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101575] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101580] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101585] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101591] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101595] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101600] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101606] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 4.103941] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 4.104143] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
    [ 4.106273] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 4.106627] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    [ 4.106742] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 4.108091] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 4.108226] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 4.108419] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 4.109161] mei_me 0000:00:16.0: setting latency timer to 64
    [ 4.109212] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
    [ 4.116824] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 4.116833] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.125699] [drm] Initialized drm 1.1.0 20060810
    [ 4.151578] [Firmware Bug]: Invalid critical threshold (0)
    [ 4.152801] hp_accel: hardware type DV7 found
    [ 4.153398] lis3lv02d: 8 bits sensor found
    [ 4.162429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.162451] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 4.162458] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 4.162734] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 4.163141] [drm] Memory usable by graphics device = 2048M
    [ 4.163146] checking generic (b0000000 580000) vs hw (b0000000 10000000)
    [ 4.163149] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 4.163171] Console: switching to colour dummy device 80x25
    [ 4.163258] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90008efe000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 43
    [ 4.163262] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 4.165071] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.165073] ACPI: Thermal Zone [TZ01] (60 C)
    [ 4.167001] i915 0000:00:02.0: setting latency timer to 64
    [ 4.189598] Bluetooth: Core ver 2.16
    [ 4.189618] NET: Registered protocol family 31
    [ 4.189620] Bluetooth: HCI device and connection manager initialized
    [ 4.189632] Bluetooth: HCI socket layer initialized
    [ 4.189636] Bluetooth: L2CAP socket layer initialized
    [ 4.189642] Bluetooth: SCO socket layer initialized
    [ 4.189750] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.193820] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
    [ 4.200427] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 4.200432] Copyright(c) 2003-2013 Intel Corporation
    [ 4.200504] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 4.200613] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 4.200826] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 4.203438] usbcore: registered new interface driver btusb
    [ 4.206393] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
    [ 4.209620] i915 0000:00:02.0: irq 45 for MSI/MSI-X
    [ 4.209634] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 4.209636] [drm] Driver supports precise vblank timestamp query.
    [ 4.209838] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
    [ 4.212021] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [ 4.224616] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
    [ 4.235557] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 4.235562] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 4.235564] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 4.235566] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 4.235664] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.259013] fbcon: inteldrmfb (fb0) is primary device
    [ 4.262350] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 4.284850] iTCO_vendor_support: vendor-support=0
    [ 4.285523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 4.285561] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 4.285676] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.286793] media: Linux media interface: v0.10
    [ 4.290737] Linux video capture interface: v2.00
    [ 4.301250] systemd-udevd[174]: renamed network interface eth0 to enp3s0
    [ 4.302202] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
    [ 4.304880] cfg80211: World regulatory domain updated:
    [ 4.304881] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 4.304883] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.304883] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.304884] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    [ 4.304885] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.304886] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.304887] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
    [ 4.309128] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9
    [ 4.309335] usbcore: registered new interface driver uvcvideo
    [ 4.309336] USB Video Class driver (1.1.1)
    [ 4.311646] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
    [ 4.316794] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.325688] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
    [ 4.327465] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
    [ 4.328001] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.337248] systemd-udevd[192]: renamed network interface wlan0 to wlo1
    [ 4.345739] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 4.355989] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.364320] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.398187] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.405698] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.414845] ACPI: AC Adapter [ACAD] (on-line)
    [ 4.415293] wmi: Mapper loaded
    [ 4.435932] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 4.467799] input: HP WMI hotkeys as /devices/virtual/input/input10
    [ 4.498300] r8169 0000:03:00.0 enp3s0: link down
    [ 4.498337] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 5.050228] Console: switching to colour frame buffer device 200x56
    [ 5.056819] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 5.056821] i915 0000:00:02.0: registered panic notifier
    [ 5.062898] acpi device:02: registered as cooling_device5
    [ 5.063042] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 5.063105] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
    [ 5.074847] acpi device:14: registered as cooling_device6
    [ 5.081681] acpi device:15: registered as cooling_device7
    [ 5.081715] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 5.081795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input12
    [ 5.081995] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 5.082246] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 5.096419] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
    [ 5.114610] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 5.114695] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 5.114984] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 5.115037] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
    [ 5.123576] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
    [ 5.343735] wlo1: authenticate with 04:a1:51:18:3f:5a
    [ 5.357336] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
    [ 5.360056] wlo1: authenticated
    [ 5.363243] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
    [ 5.367023] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=1)
    [ 5.370719] wlo1: associated
    [ 5.370764] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
    [ 5.649701] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    [ 5.737424] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [ 9.301633] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
    [ 12.411184] systemd-journald[130]: File /var/log/journal/9f3480e1044d4c389152563598411bae/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 12.848912] fuse init (API version 7.22)
    [ 14.026946] traps: cinnamon[570] trap int3 ip:7ff3d815c289 sp:7fffd52060f0 error:0
    [ 14.114772] systemd-journald[130]: Deleted empty journal /var/log/journal/9f3480e1044d4c389152563598411bae/[email protected]~ (3256320 bytes).
    [ 14.116644] systemd-journald[130]: Vacuuming done, freed 10727424 bytes
    [ 14.129219] systemd-journald[130]: Failed to write entry (26 items, 14336620 bytes) despite vacuuming, ignoring: Argument list too long
    [ 14.305135] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 14.347792] ISO 9660 Extensions: RRIP_1991A
    [ 62.027286] Corrupted low memory at ffff880000006598 (6598 phys) = 100000000000
    [ 62.027363] ------------[ cut here ]------------
    [ 62.027373] WARNING: CPU: 0 PID: 45 at arch/x86/kernel/check.c:140 check_for_bios_corruption+0x10f/0x120()
    [ 62.027375] Memory corruption detected in low memory
    [ 62.027417] Modules linked in: nls_utf8 isofs fuse snd_hda_codec_hdmi snd_hda_codec_idt hp_wmi sparse_keymap joydev intel_powerclamp coretemp kvm_intel kvm crc32c_intel uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media iTCO_wdt iTCO_vendor_support arc4 iwldvm mac80211 microcode psmouse serio_raw pcspkr btusb iwlwifi bluetooth cfg80211 r8169 snd_hda_intel rfkill hp_accel mii i915 thermal snd_hda_codec lis3lv02d wmi snd_hwdep snd_pcm input_polldev drm_kms_helper snd_page_alloc ac video drm snd_timer i2c_i801 i2c_algo_bit snd battery mei_me i2c_core soundcore intel_agp mei shpchp intel_ips intel_gtt lpc_ich acpi_cpufreq processor evdev fglrx(PO) amd_iommu_v2 button ext4 crc16 mbcache jbd2 hid_generic usbhid hid sr_mod cdrom sd_mod ahci ehci_pci ehci_hcd libahci libata scsi_mod
    [ 62.027498] usbcore usb_common
    [ 62.027504] CPU: 0 PID: 45 Comm: kworker/0:2 Tainted: P O 3.12.6-1-ARCH #1
    [ 62.027506] Hardware name: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 62.027511] Workqueue: events check_corruption
    [ 62.027513] 0000000000000009 ffff88024f0b5d30 ffffffff814ee4fb ffff88024f0b5d78
    [ 62.027518] ffff88024f0b5d68 ffffffff81062bcd 0000000000000000 ffff880000010000
    [ 62.027521] ffffffff81a28c50 0000000000000001 ffff880000000000 ffff88024f0b5dc8
    [ 62.027525] Call Trace:
    [ 62.027534] [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
    [ 62.027541] [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
    [ 62.027545] [<ffffffff81062c3c>] warn_slowpath_fmt+0x4c/0x50
    [ 62.027548] [<ffffffff8105046f>] check_for_bios_corruption+0x10f/0x120
    [ 62.027552] [<ffffffff8105048e>] check_corruption+0xe/0x40
    [ 62.027558] [<ffffffff8107dbc7>] process_one_work+0x167/0x450
    [ 62.027561] [<ffffffff8107e5d1>] worker_thread+0x121/0x3a0
    [ 62.027565] [<ffffffff8107e4b0>] ? manage_workers.isra.23+0x2b0/0x2b0
    [ 62.027572] [<ffffffff81084fe0>] kthread+0xc0/0xd0
    [ 62.027576] [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
    [ 62.027581] [<ffffffff814fcffc>] ret_from_fork+0x7c/0xb0
    [ 62.027585] [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
    [ 62.027588] ---[ end trace 7db8b9483b232f3c ]---
    [ 379.895022] systemd-journald[130]: Vacuuming done, freed 7458816 bytes
    [ 382.437200] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
    [ 382.535763] usb-storage 2-1.1:1.0: USB Mass Storage device detected
    [ 382.535904] scsi6 : usb-storage 2-1.1:1.0
    [ 382.536046] usbcore: registered new interface driver usb-storage
    [ 383.537746] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
    [ 383.539529] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 383.541031] sd 6:0:0:0: [sdc] Write Protect is off
    [ 383.541037] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 383.542023] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 383.554355] sdc: sdc1
    [ 383.558183] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    If I run aticonfig --intial, xorg does not start and the dmesg output is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bfffff

    I have toyed with the catalyst-total-pxp configuration and it will now launch x but executing a cinnamon session kicks me back out into the console.
    E: Dmesg output and Xorg log both look fine (to me).
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
    [ 0.000000] [mem 0x25be00000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
    [ 0.000000] [mem 0x258000000-0x25bdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
    [ 0.000000] [mem 0x200000000-0x257ffffff] page 2M
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x9b5fffff] page 2M
    [ 0.000000] [mem 0x9b600000-0x9b63efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] [mem 0x9b7ff000-0x9b7fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000009b75e000 00040
    [ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
    [ 0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
    [ 0.000000] NODE_DATA [mem 0x25bff5000-0x25bff9fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25bffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
    [ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] node 0: [mem 0x200000000-0x25bffffff]
    [ 0.000000] On node 0 totalpages: 2045404
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9881 pages used for memmap
    [ 0.000000] DMA32 zone: 632384 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22272 pages used for memmap
    [ 0.000000] Normal zone: 1409024 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
    [ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013166
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7968736K/8181616K available (5116K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2527.115 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.82 BogoMIPS (lpj=8423716)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000034] Security Framework initialized
    [ 0.000044] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000045] Yama: becoming mindful.
    [ 0.000540] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002404] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003228] Mount-cache hash table entries: 256
    [ 0.003423] Initializing cgroup subsys memory
    [ 0.003435] Initializing cgroup subsys devices
    [ 0.003437] Initializing cgroup subsys freezer
    [ 0.003439] Initializing cgroup subsys net_cls
    [ 0.003440] Initializing cgroup subsys blkio
    [ 0.003461] CPU: Physical Processor ID: 0
    [ 0.003462] CPU: Processor Core ID: 0
    [ 0.003467] mce: CPU supports 9 MCE banks
    [ 0.003478] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003488] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003577] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.004553] ACPI: Core revision 20130725
    [ 0.013862] ACPI: All ACPI Tables successfully acquired
    [ 0.040074] ftrace: allocating 20317 entries in 80 pages
    [ 0.050041] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.083030] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
    [ 0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.187282] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.187285] ... version: 3
    [ 0.187285] ... bit width: 48
    [ 0.187286] ... generic registers: 4
    [ 0.187287] ... value mask: 0000ffffffffffff
    [ 0.187288] ... max period: 000000007fffffff
    [ 0.187289] ... fixed-purpose events: 3
    [ 0.187290] ... event mask: 000000070000000f
    [ 0.663841] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.650477] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.703729] Brought up 4 CPUs
    [ 0.703734] smpboot: Total of 4 processors activated (20225.29 BogoMIPS)
    [ 0.706247] devtmpfs: initialized
    [ 0.709362] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
    [ 0.710207] RTC time: 6:14:18, date: 01/25/14
    [ 0.710248] NET: Registered protocol family 16
    [ 0.710345] cpuidle: using governor ladder
    [ 0.710347] cpuidle: using governor menu
    [ 0.710375] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.710377] ACPI: bus type PCI registered
    [ 0.710379] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.710443] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.710446] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
    [ 0.717442] PCI: Using configuration type 1 for base access
    [ 0.718023] bio: create slab <bio-0> at 0
    [ 0.718137] ACPI: Added _OSI(Module Device)
    [ 0.718139] ACPI: Added _OSI(Processor Device)
    [ 0.718140] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.718141] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.719738] ACPI: EC: Look up EC in DSDT
    [ 0.727062] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.732709] ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.733085] ACPI: Dynamic OEM Table Load:
    [ 0.733087] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.733226] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.733586] ACPI: Dynamic OEM Table Load:
    [ 0.733588] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.757289] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.757699] ACPI: Dynamic OEM Table Load:
    [ 0.757701] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.767184] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.767569] ACPI: Dynamic OEM Table Load:
    [ 0.767571] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.827076] ACPI: Interpreter enabled
    [ 0.827091] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.827097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.827117] ACPI: (supports S0 S3 S4 S5)
    [ 0.827119] ACPI: Using IOAPIC for interrupt routing
    [ 0.827154] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.827263] ACPI: No dock devices found.
    [ 1.461183] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
    [ 1.461215] \_SB_.PCI0:_OSC invalid UUID
    [ 1.461216] _OSC request data:1 8 0
    [ 1.461245] \_SB_.PCI0:_OSC invalid UUID
    [ 1.461246] _OSC request data:1 1f 0
    [ 1.461249] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.461251] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.461907] PCI host bridge to bus 0000:00
    [ 1.461911] pci_bus 0000:00: root bus resource [bus 00-7e]
    [ 1.461912] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.461914] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.461915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.461917] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
    [ 1.461925] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    [ 1.461941] DMAR: Disabling batched IOTLB flush on Ironlake
    [ 1.462003] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
    [ 1.462034] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.462069] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.462102] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    [ 1.462112] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 1.462118] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.462122] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
    [ 1.462225] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 1.462253] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
    [ 1.462346] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.462430] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 1.462844] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
    [ 1.465285] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.465342] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.465384] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 1.465404] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
    [ 1.465500] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.465545] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.465580] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 1.465677] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.465723] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.465756] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 1.465853] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.465899] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.465946] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 1.466360] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
    [ 1.468800] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.468856] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.468891] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 1.468992] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 1.469026] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
    [ 1.469192] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
    [ 1.469218] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
    [ 1.469229] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
    [ 1.469239] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
    [ 1.469250] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
    [ 1.469261] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
    [ 1.469272] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
    [ 1.469336] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.469405] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 1.469425] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
    [ 1.469455] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
    [ 1.469543] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    [ 1.469570] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
    [ 1.469761] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
    [ 1.469775] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.469785] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
    [ 1.469792] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
    [ 1.469803] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    [ 1.469840] pci 0000:01:00.0: supports D1 D2
    [ 1.469884] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
    [ 1.469899] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
    [ 1.469966] pci 0000:01:00.1: supports D1 D2
    [ 1.470024] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.470027] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.470029] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.470032] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.470151] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
    [ 1.470195] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
    [ 1.470407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.480075] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.480083] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.480090] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.480101] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.480205] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.480221] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.480247] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
    [ 1.480264] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
    [ 1.480276] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 1.480339] pci 0000:03:00.0: supports D1 D2
    [ 1.480340] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.480382] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 1.490020] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.490028] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.490035] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.490046] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.490160] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    [ 1.490173] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.490174] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.490176] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.490177] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
    [ 1.490618] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.490666] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.490712] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.490761] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.490808] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.490854] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.490902] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.490948] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.693626] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
    [ 1.693629] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.693631] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.693691] PCI host bridge to bus 0000:7f
    [ 1.693694] pci_bus 0000:7f: root bus resource [bus 7f]
    [ 1.693698] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
    [ 1.693735] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
    [ 1.693774] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
    [ 1.693808] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
    [ 1.693841] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
    [ 1.693875] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
    [ 1.694220] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 1.694226] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.694261] ACPI: \_SB_.CPBG: notify handler is installed
    [ 1.694272] Found 2 acpi root devices
    [ 1.694307] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.694393] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.694397] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.694399] vgaarb: loaded
    [ 1.694400] vgaarb: bridge control possible 0000:01:00.0
    [ 1.694401] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.694436] PCI: Using ACPI for IRQ routing
    [ 1.699238] PCI: pci_cache_line_size set to 64 bytes
    [ 1.699337] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 1.699339] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
    [ 1.699340] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
    [ 1.699428] NetLabel: Initializing
    [ 1.699429] NetLabel: domain hash size = 128
    [ 1.699430] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.699443] NetLabel: unlabeled traffic allowed by default
    [ 1.699467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.699472] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.701500] Switched to clocksource hpet
    [ 1.705449] pnp: PnP ACPI init
    [ 1.705466] ACPI: bus type PNP registered
    [ 1.705591] pnp 00:00: [dma 4]
    [ 1.705621] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.705641] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.705757] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.705791] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.705846] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 1.705848] system 00:04: [io 0x0800-0x080f] has been reserved
    [ 1.705850] system 00:04: [io 0xffff] has been reserved
    [ 1.705852] system 00:04: [io 0xffff] has been reserved
    [ 1.705853] system 00:04: [io 0x0400-0x047f] could not be reserved
    [ 1.705855] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.705857] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 1.705858] system 00:04: [io 0x0380-0x038e] has been reserved
    [ 1.705861] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.705887] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.705918] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.705955] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.706069] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.706268] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.706270] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.706272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.706274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.706275] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
    [ 1.706277] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.706281] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.706283] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.706285] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
    [ 1.706287] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.905114] pnp: PnP ACPI: found 10 devices
    [ 1.905115] ACPI: bus type PNP unregistered
    [ 1.911635] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 1.911639] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 1.911677] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
    [ 1.911680] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.911682] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.911685] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.911687] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.911691] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.911694] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.911699] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.911704] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.911711] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
    [ 1.911713] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.911716] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.911721] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.911726] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.911733] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 1.911747] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.911749] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.911750] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.911752] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.911753] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.911755] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
    [ 1.911756] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.911758] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 1.911760] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
    [ 1.911761] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.911763] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 1.911764] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
    [ 1.911766] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.911767] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 1.911769] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 1.911770] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.911772] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.911805] NET: Registered protocol family 2
    [ 1.912015] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.912263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.912459] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.912493] TCP: reno registered
    [ 1.912506] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.912542] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.912641] NET: Registered protocol family 1
    [ 1.912657] pci 0000:00:02.0: Boot video device
    [ 1.938251] PCI: CLS 64 bytes, default 64
    [ 1.938297] Unpacking initramfs...
    [ 1.987010] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
    [ 1.987017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.987019] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
    [ 1.987050] Simple Boot Flag at 0x44 set to 0x1
    [ 1.987234] Scanning for low memory corruption every 60 seconds
    [ 1.987523] audit: initializing netlink socket (disabled)
    [ 1.987536] type=2000 audit(1390630458.423:1): initialized
    [ 1.998005] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.999257] zbud: loaded
    [ 1.999421] VFS: Disk quotas dquot_6.5.2
    [ 1.999457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.999614] msgmni has been set to 15569
    [ 1.999955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.000004] io scheduler noop registered
    [ 2.000006] io scheduler deadline registered
    [ 2.000029] io scheduler cfq registered (default)
    [ 2.000219] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.000474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.000487] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.000526] vesafb: mode is 1600x900x32, linelength=6400, pages=0
    [ 2.000528] vesafb: scrolling: redraw
    [ 2.000529] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.000872] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
    [ 2.208493] Console: switching to colour frame buffer device 200x56
    [ 2.415572] fb0: VESA VGA frame buffer device
    [ 2.415583] intel_idle: MWAIT substates: 0x1120
    [ 2.415585] intel_idle: v0.4 model 0x25
    [ 2.415585] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.415721] GHES: HEST is not enabled!
    [ 2.415778] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.416220] Linux agpgart interface v0.103
    [ 2.416282] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.437802] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.437825] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.437928] mousedev: PS/2 mouse device common for all mice
    [ 2.439572] rtc_cmos 00:05: RTC can wake from S4
    [ 2.439720] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.439752] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.439804] drop_monitor: Initializing network drop monitor service
    [ 2.439867] TCP: cubic registered
    [ 2.439942] NET: Registered protocol family 10
    [ 2.440100] NET: Registered protocol family 17
    [ 2.440110] Key type dns_resolver registered
    [ 2.440362] registered taskstats version 1
    [ 2.441127] Magic number: 14:648:216
    [ 2.441252] rtc_cmos 00:05: setting system clock to 2014-01-25 06:14:19 UTC (1390630459)
    [ 2.441297] PM: Hibernation image not present or could not be loaded.
    [ 2.442333] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 2.442335] Write protecting the kernel read-only data: 8192k
    [ 2.444650] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
    [ 2.445600] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 2.458198] systemd-udevd[57]: starting version 208
    [ 2.466960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.485606] SCSI subsystem initialized
    [ 2.487357] ACPI: bus type USB registered
    [ 2.487410] usbcore: registered new interface driver usbfs
    [ 2.487487] libata version 3.00 loaded.
    [ 2.487522] usbcore: registered new interface driver hub
    [ 2.487576] usbcore: registered new device driver usb
    [ 2.488154] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.488305] ehci-pci: EHCI PCI platform driver
    [ 2.488453] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.488473] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.488484] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.488507] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.492709] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.492734] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
    [ 2.501178] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.501456] hub 1-0:1.0: USB hub found
    [ 2.501468] hub 1-0:1.0: 3 ports detected
    [ 2.501772] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.501779] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.501786] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.501801] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.505713] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.505733] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
    [ 2.514513] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.514735] hub 2-0:1.0: USB hub found
    [ 2.514741] hub 2-0:1.0: 3 ports detected
    [ 2.514993] ahci 0000:00:1f.2: version 3.0
    [ 2.515120] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.515225] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 2.515229] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
    [ 2.515236] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.535192] scsi0 : ahci
    [ 2.535558] scsi1 : ahci
    [ 2.535764] scsi2 : ahci
    [ 2.535955] scsi3 : ahci
    [ 2.536149] scsi4 : ahci
    [ 2.536359] scsi5 : ahci
    [ 2.536451] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
    [ 2.536457] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
    [ 2.536459] ata3: DUMMY
    [ 2.536462] ata4: DUMMY
    [ 2.536467] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
    [ 2.536471] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
    [ 2.807839] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.854462] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.854564] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.854611] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.854735] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.856919] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
    [ 2.859217] ata2.00: configured for UDMA/100
    [ 2.861881] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
    [ 2.861886] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.871886] ata1.00: configured for UDMA/133
    [ 2.872196] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F60 2.0 PQ: 0 ANSI: 5
    [ 2.873244] scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
    [ 2.903929] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
    [ 2.903933] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.905148] ata5.00: configured for UDMA/100
    [ 2.905285] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
    [ 2.909966] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [ 2.910041] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.910048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.910091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.910499] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.910501] sd 4:0:0:0: [sdb] 4096-byte physical blocks
    [ 2.910526] sd 4:0:0:0: [sdb] Write Protect is off
    [ 2.910528] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.910540] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.910633] sda: sda1 sda2 sda3 sda4
    [ 2.911010] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.911016] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.911095] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.911204] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.932118] hub 1-1:1.0: USB hub found
    [ 2.932226] hub 1-1:1.0: 6 ports detected
    [ 2.953159] sdb: sdb1 sdb3
    [ 2.953757] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 2.987624] tsc: Refined TSC clocksource calibration: 2527.285 MHz
    [ 3.037677] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 3.161529] hub 2-1:1.0: USB hub found
    [ 3.161615] hub 2-1:1.0: 8 ports detected
    [ 3.241106] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
    [ 3.333324] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.336248] usbcore: registered new interface driver usbhid
    [ 3.336250] usbhid: USB HID core driver
    [ 3.336850] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
    [ 3.337086] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.2/input0
    [ 3.397519] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
    [ 3.486816] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.546180] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.548701] systemd[1]: Set hostname to <HP-DV7>.
    [ 3.553751] systemd-fstab-generator[119]: Mount point swap is not a valid path, ignoring.
    [ 3.564291] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
    [ 3.601149] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 3.601160] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 3.601361] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.601419] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.601433] systemd[1]: Starting Remote File Systems.
    [ 3.602633] systemd[1]: Reached target Remote File Systems.
    [ 3.602645] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.604045] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.604055] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.605524] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.605534] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.606751] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.606760] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.608067] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.608103] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.610164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.610180] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.610209] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.610218] systemd[1]: Starting Paths.
    [ 3.611135] systemd[1]: Reached target Paths.
    [ 3.611150] systemd[1]: Starting udev Kernel Socket.
    [ 3.612271] systemd[1]: Listening on udev Kernel Socket.
    [ 3.612284] systemd[1]: Starting udev Control Socket.
    [ 3.613423] systemd[1]: Listening on udev Control Socket.
    [ 3.613435] systemd[1]: Starting Journal Socket.
    [ 3.614518] systemd[1]: Listening on Journal Socket.
    [ 3.614535] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.616439] systemd[1]: Starting Apply Kernel Variables...
    [ 3.617780] systemd[1]: Mounting Huge Pages File System...
    [ 3.619103] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.622065] systemd[1]: Starting Load Kernel Modules...
    [ 3.626618] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.629265] systemd[1]: Starting Set Up Additional Binary Formats...
    [ 3.630812] systemd[1]: Starting Journal Service...
    [ 3.633257] systemd[1]: Started Journal Service.
    [ 3.643151] systemd-journald[134]: Vacuuming done, freed 0 bytes
    [ 3.643416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 3.643422] ACPI: Power Button [PWRB]
    [ 3.643483] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 3.643552] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 3.643855] ACPI: Lid Switch [LID0]
    [ 3.643927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 3.643930] ACPI: Power Button [PWRF]
    [ 3.644676] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 3.644679] AMD IOMMUv2 functionality not available on this system
    [ 3.705533] systemd-udevd[157]: starting version 208
    [ 3.714133] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
    [ 3.723418] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 3.723419] Disabling lock debugging due to kernel taint
    [ 3.734452] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
    [ 3.734648] <6>[fglrx] vendor: 1002 device: 68c1 count: 1
    [ 3.734918] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
    [ 3.734926] pci 0000:01:00.0: enabling device (0000 -> 0003)
    [ 3.735095] <6>[fglrx] Kernel PAT support is enabled
    [ 3.735114] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
    [ 3.783368] ACPI: Requesting acpi_cpufreq
    [ 3.784868] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 3.785719] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    [ 3.785798] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 3.786504] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 3.786902] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 3.787185] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 3.787188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787192] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787195] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787198] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787198] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787200] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787203] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787205] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787206] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787208] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787210] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787213] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787213] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787214] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 3.788226] mei_me 0000:00:16.0: setting latency timer to 64
    [ 3.788279] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
    [ 3.803478] hp_accel: hardware type DV7 found
    [ 3.804108] lis3lv02d: 8 bits sensor found
    [ 3.806403] [drm] Initialized drm 1.1.0 20060810
    [ 3.817825] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 3.820698] usb-storage 2-1.1:1.0: USB Mass Storage device detected
    [ 3.821478] scsi6 : usb-storage 2-1.1:1.0
    [ 3.822190] usbcore: registered new interface driver usb-storage
    [ 3.836293] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    [ 3.840807] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
    [ 3.842785] [Firmware Bug]: Invalid critical threshold (0)
    [ 3.848265] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 3.848278] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.848284] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 3.848512] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 3.848684] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90000c4e000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 44
    [ 3.848685] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 3.848994] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.848996] ACPI: Thermal Zone [TZ01] (60 C)
    [ 3.854926] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 3.855035] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 3.855410] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 3.855479] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
    [ 3.856762] [drm] Memory usable by graphics device = 2048M
    [ 3.856877] checking generic (b0000000 580000) vs hw (b0000000 10000000)
    [ 3.856906] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 3.861908] cfg80211: Calling CRDA to update world regulatory domain
    [ 3.867315] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
    [ 3.872505] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 3.873734] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 3.873734] Copyright(c) 2003-2013 Intel Corporation
    [ 3.873811] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 3.875297] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.875446] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
    [ 3.879450] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
    [ 3.879788] Bluetooth: Core ver 2.16
    [ 3.881003] NET: Registered protocol family 31
    [ 3.881005] Bluetooth: HCI device and connection manager initialized
    [ 3.881016] Bluetooth: HCI socket layer initialized
    [ 3.881019] Bluetooth: L2CAP socket layer initialized
    [ 3.881026] Bluetooth: SCO socket layer initialized
    [ 3.883938] usbcore: registered new interface driver btusb
    [ 3.884347] Console: switching to colour dummy device 80x25
    [ 3.886414] i915 0000:00:02.0: setting latency timer to 64
    [ 3.892348] ACPI: AC Adapter [ACAD] (on-line)
    [ 3.906181] systemd-journald[134]: Received request to flush runtime journal from PID 1
    [ 3.910134] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 3.910140] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 3.910142] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 3.910145] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 3.910257] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 3.930630] i915 0000:00:02.0: irq 47 for MSI/MSI-X
    [ 3.930654] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 3.930656] [drm] Driver supports precise vblank timestamp query.
    [ 3.931084] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.934147] input: PC Speaker as /devices/platform/pcspkr/input/input11
    [ 3.936986] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 3.950834] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
    [ 3.966690] fbcon: inteldrmfb (fb0) is primary device
    [ 3.987780] Switched to clocksource tsc
    [ 3.996141] iTCO_vendor_support: vendor-support=0
    [ 3.996902] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 3.996972] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 3.997186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.022206] systemd-udevd[171]: renamed network interface eth0 to enp3s0
    [ 4.023553] cfg80211: World regulatory domain updated:
    [ 4.023554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 4.023555] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.023556] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.023557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    [ 4.023558] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.023558] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.023559] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
    [ 4.080995] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
    [ 4.098822] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
    [ 4.099319] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
    [ 4.099803] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.100209] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.100361] wmi: Mapper loaded
    [ 4.103136] input: HP WMI hotkeys as /devices/virtual/input/input13
    [ 4.104748] systemd-udevd[164]: renamed network interface wlan0 to wlo1
    [ 4.125347] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 4.240631] media: Linux media interface: v0.10
    [ 4.244154] Linux video capture interface: v2.00
    [ 4.252000] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
    [ 4.257341] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14
    [ 4.257488] usbcore: registered new interface driver uvcvideo
    [ 4.257489] USB Video Class driver (1.1.1)
    [ 4.770357] Console: switching to colour frame buffer device 200x56
    [ 4.778627] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 4.778629] i915 0000:00:02.0: registered panic notifier
    [ 4.785739] acpi device:02: registered as cooling_device5
    [ 4.785956] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 4.786022] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
    [ 4.797354] acpi device:14: registered as cooling_device6
    [ 4.802976] acpi device:15: registered as cooling_device7
    [ 4.803025] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 4.803087] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input16
    [ 4.803440] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 4.803977] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 4.805256] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 4.805400] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 4.805408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.824848] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
    [ 4.827187] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 4.828646] sd 6:0:0:0: [sdc] Write Protect is off
    [ 4.828651] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 4.830784] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 4.839857] sdc: sdc1
    [ 4.843514] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    [ 4.894625] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.902120] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.937012] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.944514] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.978524] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 5.038118] r8169 0000:03:00.0 enp3s0: link down
    [ 5.038174] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 5.376682] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    [ 5.470179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 5.851763] wlo1: authenticate with 04:a1:51:18:3f:5a
    [ 5.865752] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
    [ 5.868512] wlo1: authenticated
    [ 5.869715] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
    [ 5.873551] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=2)
    [ 5.876272] wlo1: associated
    [ 5.876327] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
    [ 38.341494] fuse init (API version 7.22)
    Xorg.0.log
    [ 20.932]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 20.932] X Protocol Version 11, Revision 0
    [ 20.932] Build Operating System: Linux 3.12.6-1-ARCH x86_64
    [ 20.932] Current Operating System: Linux HP-DV7 3.12.8-1-ARCH #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014 x86_64
    [ 20.932] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 20.932] Build Date: 08 January 2014 01:35:51PM
    [ 20.932]
    [ 20.932] Current version of pixman: 0.32.4
    [ 20.932] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 20.932] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 20.932] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 25 01:16:07 2014
    [ 20.935] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 20.938] (==) No Layout section. Using the first Screen section.
    [ 20.938] (==) No screen section available. Using defaults.
    [ 20.938] (**) |-->Screen "Default Screen Section" (0)
    [ 20.938] (**) | |-->Monitor "<default monitor>"
    [ 20.938] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 20.938] (**) | |-->Device "Intel Graphics"
    [ 20.938] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 20.938] (==) Automatically adding devices
    [ 20.938] (==) Automatically enabling devices
    [ 20.938] (==) Automatically adding GPU devices
    [ 20.947] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 20.947] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
    [ 20.947] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 20.947] (II) Loader magic: 0x7fac20
    [ 20.947] (II) Module ABI versions:
    [ 20.947] X.Org ANSI C Emulation: 0.4
    [ 20.947] X.Org Video Driver: 14.1
    [ 20.947] X.Org XInput driver : 19.1
    [ 20.947] X.Org Server Extension : 7.0
    [ 20.947] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 20.948] (--) PCI:*(0:0:2:0) 8086:0046:103c:144b rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
    [ 20.949] (--) PCI: (0:1:0:0) 1002:68c1:103c:144b rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
    [ 20.949] Initializing built-in extension Generic Event Extension
    [ 20.949] Initializing built-in extension SHAPE
    [ 20.949] Initializing built-in extension MIT-SHM
    [ 20.949] Initializing built-in extension XInputExtension
    [ 20.949] Initializing built-in extension XTEST
    [ 20.949] Initializing built-in extension BIG-REQUESTS
    [ 20.949] Initializing built-in extension SYNC
    [ 20.949] Initializing built-in extension XKEYBOARD
    [ 20.949] Initializing built-in extension XC-MISC
    [ 20.949] Initializing built-in extension SECURITY
    [ 20.949] Initializing built-in extension XINERAMA
    [ 20.949] Initializing built-in extension XFIXES
    [ 20.949] Initializing built-in extension RENDER
    [ 20.949] Initializing built-in extension RANDR
    [ 20.949] Initializing built-in extension COMPOSITE
    [ 20.949] Initializing built-in extension DAMAGE
    [ 20.949] Initializing built-in extension MIT-SCREEN-SAVER
    [ 20.950] Initializing built-in extension DOUBLE-BUFFER
    [ 20.950] Initializing built-in extension RECORD
    [ 20.950] Initializing built-in extension DPMS
    [ 20.950] Initializing built-in extension X-Resource
    [ 20.950] Initializing built-in extension XVideo
    [ 20.950] Initializing built-in extension XVideo-MotionCompensation
    [ 20.950] Initializing built-in extension XFree86-VidModeExtension
    [ 20.950] Initializing built-in extension XFree86-DGA
    [ 20.950] Initializing built-in extension XFree86-DRI
    [ 20.950] Initializing built-in extension DRI2
    [ 20.950] (II) LoadModule: "glx"
    [ 20.951] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
    [ 20.954] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 20.954] compiled for 6.9.0, module version = 1.0.0
    [ 20.954] Loading extension GLX
    [ 20.954] (II) LoadModule: "intel"
    [ 20.955] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 20.959] (II) Module intel: vendor="X.Org Foundation"
    [ 20.959] compiled for 1.14.2, module version = 2.21.15
    [ 20.959] Module class: X.Org Video Driver
    [ 20.959] ABI class: X.Org Video Driver, version 14.1
    [ 20.959] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
    [ 20.960] (++) using VT number 1
    [ 20.963] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 20.963] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 20.963] (==) intel(0): RGB weight 888
    [ 20.963] (==) intel(0): Default visual is TrueColor
    [ 20.963] (**) intel(0): Option "AccelMethod" "sna"
    [ 20.964] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
    [ 20.964] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
    [ 20.964] (**) intel(0): Framebuffer tiled
    [ 20.964] (**) intel(0): Pixmaps tiled
    [ 20.964] (**) intel(0): "Tear free" disabled
    [ 20.964] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 20.964] (II) intel(0): Output LVDS1 has no monitor section
    [ 20.965] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 20.965] (II) intel(0): Output VGA1 has no monitor section
    [ 20.965] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
    [ 20.965] (==) intel(0): DPI set to (96, 96)
    [ 20.965] (II) Loading sub module "dri2"
    [ 20.965] (II) LoadModule: "dri2"
    [ 20.965] (II) Module "dri2" already built-in
    [ 20.965] (==) Depth 24 pixmap format is 32 bpp
    [ 20.969] (II) intel(0): SNA initialized with Ironlake (gen5) backend
    [ 20.969] (==) intel(0): Backing store disabled
    [ 20.969] (==) intel(0): Silken mouse enabled
    [ 20.969] (II) intel(0): HW Cursor enabled
    [ 20.969] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 20.972] (==) intel(0): DPMS enabled
    [ 20.972] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 20.972] (II) intel(0): [DRI2] Setup complete
    [ 20.972] (II) intel(0): [DRI2] DRI driver: i965
    [ 20.972] (II) intel(0): direct rendering: DRI2 Enabled
    [ 20.972] (==) intel(0): hotplug detection: "enabled"
    [ 20.972] (--) RandR disabled
    [ 20.984] (EE) GLX error: Can not get required symbols.
    [ 20.996] (II) intel(0): switch to mode [email protected] on pipe 0 using LVDS1, position (0, 0), rotation normal
    [ 21.006] (II) intel(0): Setting screen physical size to 423 x 238
    [ 21.139] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 21.139] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 21.139] (II) LoadModule: "evdev"
    [ 21.140] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 21.141] (II) Module evdev: vendor="X.Org Foundation"
    [ 21.141] compiled for 1.14.3, module version = 2.8.2
    [ 21.141] Module class: X.Org XInput Driver
    [ 21.141] ABI class: X.Org XInput driver, version 19.1
    [ 21.141] (II) Using input driver 'evdev' for 'Power Button'
    [ 21.141] (**) Po

Maybe you are looking for