Hp F4180 not on Apples list, its an AIO, am I snookered?

OK, I just checked Printer FAQ on APple for my AIO hp F4180 printer/scanner, but its not there. The F4200 series is there.
hp site has no update of drivers etc, does this mean I cannot use my Printer AIO with Snow?
cheers

oh by the way, this is the printer I got with my mac, on the deal when I bought it Xmas 2007, so was hoping with Apple recommending it to me they would support it! or get hp to support it.
No Snow for me if I have to buy another printer just to support another OS

Similar Messages

  • Enhancement to bypass "Source not included in list despite source list req"

    Dear Experts,
    When the indicator source list requirement is maintained in the material master, the system will only allow creation of a purchase order if the source  is maintained in the source list (t-code ME01).  If its missing we will get an error message when creating or chaging PO with message :"Source not included in list despite source list req".
    Is there a enhancement through which we can influence the error message for PO's of type stock transfter order? I tried searching for one but couldn't find a appropriate one.
    Had look at ME_PROCESS_PO_CUST & ME_PROCESS_PO also but they were not much useful.
    Thank You.
    Best Regards,
    SP

    >
    User General wrote:
    > Hi thank you very much for your useful reply. My requirement is slightly different though.
    >
    > I have to avoid the error message not for entire plant but the plant and material number combination.Is there any customizing for achieving this.
    >
    > In this case if the same plant and material number is used but for different PO type like standard PO(type NB) it should still show an error message as standard.But if the PO type is stock transfer order(Y2UB)  then error message to be avoided.
    so what you actually want is: source list is obligatory for a combination of plant / purchase order type / material number.
    there's no customizing this.
    actually, i have difficulties in accepting your search for an exit/enhancement because the configuration of your system does not match your business process  = why do you want to avoid an error message in case of a STO scenario where the source list entry is missing?? either you have defined source lists obligatory on plant level - then see to it, that the source lists are maintained in the plant (you can mass generate it using ME05) or it is not ... in which case you will have to train your users accordingly ...
    please do not take offense - none is intended - but i wonder why one would make a thing mandatory, only to circumvent the obligation by (intransparent) programming.

  • X-fi Extreme Gamers not in IRQ list, doesn't work at all.

    9X-fi Extreme Gamers not in IRQ list, doesn't work at all.O Lo mates,
    my specs:
    Intel C2D E8500
    Gigabyte GA-EP45-DS3R
    Club3D ATi 4870 52MB
    2GB OCZ
    2 WD Raptors connected to onboard raid controller
    X-Fi in PCI slot
    my problem:
    The X-fi isn't working as it should. It's not getting detected in bios / POST so it can ofcourse not be working in any OS (currently running Win7 7068
    I used to own a AMD 2500 / Asus A7N8X-E deluxe, and it used to work, but when I upgraded to a C2D E6600 / DFI Infinity it only showed up 3 times in my IRQ list / OS. This ofcourse is to blame to Creative, because they dont care about the PCI standard and didn't implement IRQ resource sharing in the Extreme Gamer card. After upgrading to my current setup (listed above) it's still not working at all, even though I tried disabling all onboard devices I dont use, and manually mapped IRQ channels to the PCI ports so they wouldnt share.
    The X-fi is fine, I recently put it in another pc with another brand motherboard, and it was detected instantly. Guess the guy who owns that pc had some luck with his motherboard don't feeling the need to share IRQ's at that particulair moment... its like Russian roulette.
    Is there anything i can do to get the soundcard to work even though it doesn't implement the PCI standards and therefore in my opinion failed as a soundcard and as a brand as a whole?
    Greats,
    eXistenZ
    Message Edited by existenZNL on 06-24-2009 02:34 PMMessage Edited by existenZNL on 06-24-2009 02:35 [email protected]

    = Hey mate:
    Havent seen your exact bios, but if you have a setting in it, called? reset [color="#000080" size="3">Extended System Configuration Data.
    Then that might shuffle your bios, per se and then let that card be redetected. I used to use that on my systems when swapping one single part in order to get all the IRQs to shuffle around again, and give one to my card. Do you remember when the magic number to give to your Creative card was IRQ 5, DMA Low of , DMA High of 5, address of 220 and port of 330? Well that is how I used to get my system to shuffle my printer ports and modems in order to bump that sound card to get the correct addresses. Also check to see if the edges of your sound card are blackened. Wipe them with your fingers and see if there is an ashy burned residue. This will tell you if that card has been electrically damaged, or oily/dirty. Also the backlplates on some sound cards are slightly bent and your sound card will fit into its slot, but not all the way. A hair off and that card will be picked by your system every couple of boots.
    Try this and let me know how it goes for you.

  • Variable not in select list issue

    Hi friends,
    To the existing OBIA mapping, that is for one of the SDE mapping i dragged a single column from source to source qualifier and also updated that column in the sql query of the source qualifier and finally dragged it to my target staging table.
    After that if i tried to run that SDE task in my DAC means, it is failing and returning the below error in log
    ora-01007 variable not in select list in informatica
    since i have checked and verified the order of the column in the source qualifier port and the query. It is same, but then too returning the above error.
    What is the fix for it.
    Thanks in advance.
    Regards,
    Saro

    Hi Svee,
    Thanks for the reply.
    I followed the below link for adding the extra column to the per-built mapping
    http://www.rittmanmead.com/2008/07/amending-existing-category-1-sde-and-sil-mappings-in-oracle-bi-apps-795/+_
    Hence for example, i copied the workflow of SDE_ORA_AbsenceEvent to my new custom folder. In that i just tried only with SDE mapping(from source to staging)
    i had three source tables for it
    per_absence_attendances
    per_absence_attendance_types
    per_abs_attendance_reasons
    Target(staging table)
    W_absence_event_ds
    i tried of adding a date column "last_updated_by" from the table "per_absence_attendances" to the staging table "W_absence_event_ds"
    Before adding the date column, i just tried by copying the SDE_ORA_AbsenceEvent to my custom folder and tried to execute that in DAC as it is loading successfully in my target(staging table) "W_absence_event_ds".
    After that i added the date column to the target(staging table) "W_absence_event_ds" and tried to execute the same in DAC, but @ that time only im receiving the variable error.
    Like you said
    since its OOB mapping you should have 2 workflows(full and incr) for the same mapping, make sure your changes are affected to workflow ending with _Full.I dint copied the workflow SDE_ORA_AbsenceEvent_full to my custom folder. Whether is this the problem for this variable error whether can i copy the full(workflow) and can i try.
    And also a good news that OBIA 7.9.6.4 and DAC 11g released.
    http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bi-downloads-1525270.html_+
    Regards,
    Saro

  • Has anyone else lost the ability to see  apple tv on the device list, its no longer under devices either!, has anyone else lost the ability to see  apple tv on the device list, its no longer under devices either!

    has anyone else lost the ability to see  apple tv on the device list, its no longer under devices either!, has anyone else lost the ability to see  apple tv on the device list, its no longer under devices either!

    *Feedback*
    "Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
    http://www.apple.com/feedback/ipad.html
    We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
    Here are the places to report bugs:
    Get an account at
    http://developer.apple.com/  then submit a bug report to http://bugreporter.apple.com/
    Once on the bugreporter page,
       -- click on New icon
       -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs.  Scroll down to find the area or application that matches the problem.
       -- etc.

  • Embedded SQL query in C - variable not in select list

    Hello everyone,
    I am new to using embedded SQL in C. I have written a query based on some very similar code I have found and I keep getting this error:
    ID: ORA-XXXX
    OVRD:
    TEXT: Oracle Errors Found - Consult Application Development Team
    INFO:
    SQLC: -1007
    GLM: ORA-01007: variable not in select list
    If anyone could help me figure out what I am doing wrong that is causing this error it would be much appreciated. Thanks in advance!
    Here is the query that is generating the error, I have changed the variable names but the syntax is the same:
    SELECT TEMP_TABLE.tble,
    TEMP_TABLE.item_date,
    TEMP_TABLE.item_number,
    TEMP_TABLE.item_id,
    TEMP_TABLE.amount,
    TEMP_TABLE.method
    FROM (
    SELECT 'C' tble,
    item_date,
    item_number,
    item_id,
    amount,
    method
    FROM current
    WHERE (settlement_date IS NULL)
    UNION ALL
    SELECT '1' tble,
    item_date,
    item_number,
    item_id,
    amount,
    method
    FROM prev1
    WHERE (date IS NULL)
    UNION ALL
    SELECT '2' tble,
    item_date,
    item_number,
    item_id,
    amount,
    pay_method
    FROM prev2
    WHERE (date IS NULL)
    UNION ALL
    SELECT '3' tble,
    item_date,
    item_number,
    item_id,
    amount,
    pay_method
    FROM prev3
    WHERE (date IS NULL)
    UNION ALL
    SELECT '4' tble,
    item_date,
    item_number,
    item_id,
    amount,
    method
    FROM prev4
    WHERE (date IS NULL)) TEMP_TABLE
    WHERE (TEMP_TABLE.item_date,
    TEMP_TABLE.item_number,
    TEMP_TABLE.item_id) IN
    (SELECT item_date, item_number, item_id
    FROM item
    WHERE (source, location) IN
    (SELECT source, location
    FROM SOURCE_REF
    WHERE online = 'O'
    AND (source, location) IN
    (SELECT source,
    location
    FROM SOURCE_METHOD_REF
    WHERE type = 'P')))

    Oh yeah I forgot to add that I have tested the query in TOAD and it works just fine so its something to do with embedding it into C I believe.

  • How to remove obsolete oss note from SPAU List

    Dear All,
       How to remove obsolete oss note from SPAU List. Bocz it having yellow trafic Signal and  it is not allowing me to reset to orginal or adopt.
    Please tell me how to reolve this problem.

    Hi,
    Please mention the Netweaver release of your system.
    Next, if you mention the note is obsolete - the traffic light should be grey.
    If its yellow, that means semi-automatic adjustment needs to be made.
    If you click on the obsolete greyed out note, you get a message saying the note correction was delivered with upgrade or support package and it could be reset.
    If you click on the yellow note, the system would try to reapply the note via SNOTE.
    Please try either or the above and let us know the system response.
    Regards,
    Srikishan

  • How do I activate Acrobat XPro- I've installed CS6 Premium on my new computer and Acrobat does not work and says its not activated. How do I resolve this problem?????

    How do I activate Acrobat XPro- I've installed CS6 Premium on my computer and Acrobat does not work and says its not activated. It is listed on the programs on the computer but will not respond. How do I fix this?????? Help Adobe?????

    Hi t0m#2410,
    How did you install Acrobat, did you install it as a part of Suite installation.
    If it is a part of suite then deactivate suite uninstall Acrobat, Reinstall Acrobat using Suite media. Launch Photoshop first and Activate.
    Then try launch Acrobat.
    Regards,
    Ajlan Huda.

  • Getting 'variable not in select list' error after extending VO

    Hi,
    My page is based on two VO. one VO has all transient attribute(LearnerSearchCritVO) and used to capture Search Criteria, The other VO is used for query(LearnerSearchVO).
    I have exteneded LearnerSearchCritVO to add 4 new additional Transient attributes
    and LearnerSerachVO and its IMPL class to add additional where clause.
    After substitution and personalization when I am querying through page I am getting the following error -
    ## Detail 0 ##
    java.sql.SQLException: ORA-01007: variable not in select list
    The query is working fine at backend and the same thing was working fine before instance is refreshed.
    I am not able to find why this error is coming.
    please help me out to sort this issue.

    Hi All
    Sorry to bring this one up again, but I've had a bit of a look around and done as much as I can based on the information given in this and other threads on the subject.
    I'm getting the java.sql.SQLException: ORA-01007: variable not in select list error from my extended VO/substitution.
    The query is based on a view for easy editing after deployment, so could that have anything to do with it?
    Here's the query from the error message:
    oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement:
    SELECT * FROM (SELECT
    SSH.FULL_NAME,
    SSH.ASSIGNMENT_NUMBER,
    SSH.JOB,
    SSH.GRADE,
    SSH.ANNUALIZED_SALARY,
    SSH.CURRENCY,
    SSH.CHANGE_DATE,
    SSH.SALARY_BASIS,
    SSH.PERSON_ID,
    SSH.ASSIGNMENT_ID,
    SSH.SUPERVISOR_ID,
    SSH.LAST_CHANGE_DATE,
    SSH.PAYROLL_NAME,
    SSH.NEXT_CHANGE_DATE,
    SSH.EMPLOYEE_NUMBER,
    SSH.CWK_NUMBER,
    SSH.PERSON_TYPE,
    SSH.EFFECTIVE_DATE,
    SSH.SUPERVISOR_ASSIGNMENT_ID,
    SSH.LEGISLATIONCODE,
    SSH.MANAGER_ENABLED
    FROM XX_SAL_SUP_HRCHY_VO_V SSH) QRSLT
    WHERE (((:1 = SUPERVISOR_ID)
    AND (:2 = EFFECTIVE_DATE)
    AND (:3 = SUPERVISOR_ASSIGNMENT_ID
    OR hr_general2.supervisor_assignments_in_use = 'FALSE')))
    ORDER BY FULL_NAME
    So... What's missing?
    Any help appreciated.
    CK

  • Hierarchy Node Variable is not displaying full list of Hierarchy

    Hi,
    I loaded Hierarchy  to an info object using flat file.
    When i created a test reports and settings to display of MAster Data of Char and executed the report
    The output displays full list of Hierarchy
    Now to have a User Entry on Hierarchy ...created a Hierarchy Node variable and executed the value help of Hierarchy Node variable is not displaying fill list of Hierarchy ...its only displaying first 15 entries in Hierarchy.
    I changed the settings of variable...etc but couldn't get the Hierarchy full list in User entry selection
    How can i fix it...
    Thanks in advance

    If anyone has the same problem, I think I found the reason when transported to production.
    BW7.3 (at least) can not show the hierarchy nodes if there is no transactional data loaded.
    So do your hierarchies only after the data has been loaded..

  • Checkbox error "The Entered Value is Not on the List of Valid Values".

    Hi All,
    I have a check box attribute inside a node which is bounded to a field of type CHAR 1. I have given the property and value for the attribute as follows:
    Attribute Name     ZCHECK
    Type assignment     Type
    Type                          ZTABLE-ZCHECK
    Read-only                         0
    Default Value     
    Null Value                           0
    Input Help Mode     Automatic
    Determined Input Help     ZCHECK
    Type of Input Help     Fixed values for domains
    Formatting     
    Compression     Default Value
    I have created an onToggle Event for it.
    Now when i execute my component i do the following.
    First i click on a button called 'EDIT'. Now the check box comes to edit mode. Now when i click on the checkbox i get the following error. "The Entered Value is Not on the List of Valid Values".
    When i try to debug, there is no problem in the 'INIT' method. The error is throw even before going inside the onToggle Event for check box.
    Please explain how to over come this.

    Hi,
    Check your field ZTABLE-ZCHECK, if it is of type CHAR1 then only possible values for checkbox should be 'X' and ' '.
    May be your domain has some other values in Fixed Value List.
    its better to bind checkbox with attribute of type boolean
    Also, the input help for attribute bound to checkbox doesn't makes any logic.
    Regards
    Manas Dua
    Edited by: Manas Dua on Feb 26, 2010 3:11 PM

  • Why is 'Qlixter' Social Search not in the list of search engines?

    Why is 'Qlixter' Social Search not in the list of search engines? Its a superb social search engine and would be of great benefit to all Firefox users. Am a little dissapointed that it is not on the selection dropdown. Would it be possible to have this included and if so how do I go about it?
    Thank you for your help and support.
    Kind Regards
    Leslie
    == This happened ==
    Every time Firefox opened
    == Since its launch late last year

    You can add any search engine you wish -> instructions at [https://support.mozilla.com/en-US/kb/Search+bar#Managing_search_engines]

  • Hi Guys, i mistakenly synced my iphone and all my email contacts appears in my contacts list. its mixed up. can someone please assist me on how to delete the email address ONLY?

    hi Guys, i mistakenly synced my iphone and all my email contacts appears in my contacts list. its mixed up. can someone please assist me on how to delete the email address ONLY?

    Don't understand your problem... Contacts sync with a compatible address book or cloud service. Contact records can contain names, addresses, phone numbers, e-mail addresses, notes, or any combination of these. If you have records you don't want in your address book that you don't want in your contacts, then segregate them into groups in your address book and only sync the group(s) you want. If you don't want them there at all, then delete them.

  • Aspire V5 471P, also not on the list for Windows 10

    I have an Aspire V5 471P, also not on the list. Is there any reason for these exclusions? What options do we have? Seems kind of strange that some of us should be penalized for no apparent reason. I bought my model at an Office Depot, no different than any other Acer models that might be bought in large chain retail stores. I've loved previous Acers I've had, but this one has been problematic since the beginning. Now I may not be able to upgrade and will be stuck with terrible Windows 8.1? Please advise.
    [subject line edited to reflect new topic]

    So nearly every Aspire V5 model but mine is in need of new drivers but mine isn't? I find that kind of difficult to believe. This is par for the course though now I think with Acer--minimal support, if any. I'll have to spend time going to websites of each of the hardware components to see if it'll work, look for chipset drivers, etc., just because Acer had decided that some of its customers are simply out of luck. I'll replace this computer as soon as it's financially possible since it has been problematic literally since Day 1 (had to call support). This is my third Acer--there will be no fourth. Hopefully I'll be able to go with Apple and avoid this Microsoft/PC manufacturer nonsense altogether. Microsoft AND Acer should be ashamed of the quality of their products over the past couple of years...

  • Hi all i from mongolia but i cant buy ipad apps becouse my country not itunes mastercard list pleace help me

    hi apple company i from mongolia my english language not good sorry.help me i cant buy ipad apps, becouse my country name is not mastercard country list. please help me

    The terms of use of the stores state (for example USA App Store) :
    The Services are available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the Services from outside these locations. Apple may use technologies to verify your compliance.
    As far as I am aware all country's stores will have similar statements

Maybe you are looking for