HP F4180 scanner doesn't work after computer hard drive crash

I had to have my iMac hard drive replaced after it crashed. Since then, the printer works fine, but I can't scan anything. Do I need to uninstall and then reinstall for everything to work properly. TIA

Hello Glo48,
Welcome to the HP Forums.
I see that you are having some scanning issues.
Try downloading and installing the HP Printer Drivers v3.0 for OS X.
Please let me know how you make out and if you have any other questions, don't be afraid to ask.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Screen not working after new hard drive installed

Hi,
Can anyone help me, I just replaced my hard drive on my 15" G4 Aluminum Power Book as it had crashed and died on me. When I finished installing the new hard drive, when switching it on the screen remains blank. Does anyone have any Ideas why and how to get it working again. The screen was working before the hard drive crash. Any help will be much appreciated.
Thanks
Robby

Here are the factory specs for your HP Pavilion dv6-1210sa Entertainment Notebook Computer. Based on the specs, the original hard drive was 250GB. This could be a factor in your issue. It could also be that the drive is an advanced format (AF) drive. Please provide the model of the drive for our review.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

All of my music was erased from my computer after my hard drive crashed and I don't want to spend the time uploading all of my old CDs to my computer. If I plug in my iPhone with all of my current music on it, will it sync to my computer?

All of my music was erased from my computer after my hard drive crashed and I don't want to spend the time uploading all of my old CDs to my computer. If I plug in my iPhone with all of my current music on it, will it sync to my computer?

This user tip should be helpful too.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

I am confused. Is there currently a way to transfer 160 gig ipod Classic music to another computer of mine after my hard drive crashed? it has old limited library already on it?

I am confused. Is there currently a way to transfer 160 gig ipod Classic music to another computer of mine after my hard drive crashed? it has old limited library already on it?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Recovering after a hard drive crash and restore

I have a question before I sync my iPod again;
I had a operating system hard drive crash a little while ago, and I reimaged my drive with a three month old backup, basically I rolled back my computer's state a couple months, and with it, the state of my iTunes library.
Now, my library is going to be missing songs that my iPod has, does this mean when I sync my iPod again iTunes is going to delete those songs it doesn't know about anymore? I don't recall seeing the option to "manually manage" the iPod anymore, but even in that case does this mean I can't automatically sync again?
I understand that I can't use iTunes to pull songs off my iPod but thats not what I want. Essentially I want to rebuild my iTunes library list from what the iPod has, even if it can't find the songs on the local disk anymore, I just don't want them deleted.
Maybe I'm approaching this problem the wrong way..

Hi there,
I'm struggling with the exact same issue, so I'm hoping you get a response soon from someone who knows what the g-o may be... I did sync my iPod after my hard drive crashed, but I had iTunes already configured to 'manually manage' my music, so it didn't clear my entire iPod. I'm just scared of accidentally deleting certain music off my iPod playlist that I didn't burn onto disc & so I'd lose it for good.
Let's hope someone's got an idea...

Can't recover my system after a hard drive crash.

Hello
My hp DV6-3123tx's hard drive crashed because of a collision
Steps i did:
Got a new hard drive and fit it in.
Using recovery DVDs tried to format it.
Everything was good but when the system reboots to install drivers it just gets stuck at the starting page (on which hp is written). I waited for hours together but it doesn't recover from that state
P.S: I had removed CMOS too after my hard drive crashed but restored and saved it's default settings in BIOS before the above mentioned steps.
This question was solved.
View Solution.

Hi,
Assuming this is just a problem with the recovery media, here's an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found starting Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I am trying to download my CS4 product after a hard drive crash

I have been searching the site for what seems like forever. I need to download my CS4 suite after a hard drive crash. All I can find are my serial numbers. Where should I be going to find my downloads. It seems like it should be under "orders" but its not. I need to get this program going as I' losing valuable time on my projects.
The orders page shows nothing, even when I click on orders or history:
The products page shows my purchases, but doesn't allow for a download:
Thanks

Direct Downloads
And really, do back up your installers for situations like this. That stuff may not be around much longer one day...
Mylenium

My original computer hard drive crashed. I have a new laptop, but I lost all my address book entries. Is there a way I can transfer my contacts on my ipad to my non-apple laptop? Tom B

My original computer hard drive crashed. I have a new laptop, but I lost all my address book entries. Is there a way I can transfer my contacts on my ipad to my non-apple laptop? Tom B

If you have a Mac, it's pretty easy. But you don't (should I make a pitch for you to get a MacBook Pro in the future)?
This should help you out to sync it back to several non-Apple software:
http://support.apple.com/kb/HT1296

How Can I get my bookmarks From My Sync account without my sync key after a hard drive crash?

My Computer Hard Drive crashed before I could back up my Sync Key or add another device. How can I get My bookmarks from my sync account without resetting the sync key and wiping my data?

Not from Mozilla. Nobody knows your Sync Key except for you. <br />
Is that hard drive usable at all? Like as an external disk in a USB hard drive enclosure?
If so, you can recover your Firefox data from that drive. <br />
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name'' <br />
Make sure that you unhide "Hidden files and folder" in the Control Panel > Folder Options -> View

How do i copy music on my nano to a new computer (the old computer hard drive crashed). None of the music was purchased from itunes, it was copied from cd's

my old computer hard drive crashed. i have music on my ipod nano - none of it purchased through itunes, all copied from cd's. how do i copy what is on the nano to a new computer.

How to use your iPod to move your music to a new computer using iTunes7
http://docs.info.apple.com/article.html?artnum=300173
How to use your iPod to move your music to a new computer using iTunes6
http://docs.info.apple.com/article.html?artnum=304304
Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?threadID=776996&tstart=0
http://discussions.apple.com/thread.jspa?threadID=805256&tstart=0
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
Also these useful internet articles...
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/help/2005/01/2waystreet/
iPod: Frequently Asked Questions
http://docs.info.apple.com/article.html?artnum=60920
Patrick

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Trying to reinstall lightroom after a hard drive crash - new hard drive

how do I re-download lightroom after a hard drive crash. I have serial number from purchasing but can't seem to reinstall. Help please. Thank you.

Moving this discussion to the Downloading, Installing, Setting Up forum.
Holliday162 you can download a new copy of Photoshop Lightroom from your account. Please see Find a download link on Adobe.com for details on how to download your purchased software.

I have a copy of my iTunes data and I'm looking to restore it all back into a new version of iTunes reloaded after a hard drive crash. How do I do this?

After having a hard drive crash, I've reloaded Windows 7 and all of my applications on a new hard drive. I have also downloaded and installed a new version of iTunes on my computer. I now want to restore all of my iTunes tracks, videos, movies, books, podcasts and all my playlists into the new version of iTunes from a back up of all of my previous hard drive before it crashed. I have tried importing the data but iTunes drops all kinds of data (artist names, album names, track number, etc.) and have to now manually go through all of my iTunes data (18,000 tracks) to restore the data. The data consists of a combination of purchased tracks (approx. 6,000) and my own personal CDs copied into iTunes. I need help badly here as I'm lost on how to proceed. Thanks.

Hi Toboggan,
If you are looking to restore your iTunes data from a backup, you may find the following article useful (while it is focused on moving between computers, many of the steps should also apply to your situation):
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Regards,
- Brenden

How do I restore my pictures to iPhoto after my hard drive crashed?

My 2010 MacBook Pro crashed in Summer of 2012, but I have some Time Machine backups from right before the crash. Once my computer was repaired, I brought it home and did a restore from the TM backup, but my iPhoto pictures didn't come with it. I have lost some photos because of this, but I hope to be able to get them back with your help! I have TM backups from around, before, and after the time of the hard drive crash. Any help is appreciated! Thank you!

Please description how you retrieve your backup from TM. I have done quite a few of these and may be able to share some experience with you.

HP F4180 scanner doesn't work after computer hard drive crash

Similar Messages

Maybe you are looking for