HP Folio 13 1000ex HDMI port problem

I have a problem with my HP Folio 13 1000ex. When I use an HDMI to HDMI cable to my LED TV it works fine but when I use a HDMI to DVI cable it does't work. I tried replacing the cable and try it also on different Desktop Monitor but still no luck. Re-installing Intel the drivers didn't work either.
Is this a BIOS or Intel driver issue?

Could you please give me the exact model number of your notebook?
You can use the following document if you need assistance in finding it.
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_re​nderType=findModel&cc=us&dlc=en&docname=c00033108&​...
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • HDMI Port Problem

    H,
    I have a HP Envy dv7 running Windows 8.1 and until recently my HDMI connection to the various TV sets in my home has been ok.  But recently problems have been occurring.  The TV screen flickers badly, audio problems and sometimes it says No Signal.    I have used several differnet HDMI cables so i know it is not the cable, it can only be the HDMI port I believe.  I don't think it is wear and tear as the Laptop is only about 16 months old, but if it is cannot the port be replaced?
    Thanks in advance for your help.
    Cheers.

    Hello OddjobBob,
    Welcome to the HP Forums!
    I understand the HDMI port appears to be faulty, as indicated by your descriptive post. Unfortunately, you cannot replace the individual HDMI port on this model, as indicated by the product's maintenance and service guide.
    At this point, I would take it to a local repair shop, or call HP directly. If you choose to call HP, you can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know if you have any other questions or concerns. Thanks!
    Mario
    I worked on behalf of HP.

  • HDMI port problems on new Apple TV.

    Any other issues out there with HDMI ports being a poor fit to the HDMI cable? If I wiggle the cable it works, but not a good connection. Should I exchange it or is this a pervasive issue?

    Do you have another cable you could try? One of the units we use had a similar issue where when I wiggled the cable it would be ok, and I thought the same thing at first, but after swapping out with a different cable it works fine.

  • Considering AppleTV, not enough HDMI ports

    I really want to get an AppleTV, because I've got a boatload of iTunes TV and movie content on my Mac, that I want to watch on my TV. Also, some things like the NHL package and other stuff is kind of cool.
    But, I've got an HDMI port problem, and I'm trying to figure out what to do.
    My sound system has 2 HDMI IN ports, 2 optical sound ports and 1 HDMI OUT ports. Both HDMI IN's are being used, and the HDMI out goes to my TV
    I have Airplay set up with my Airport Express that uses a AUX line from the AE to my sound system. I either play music from my iPhone/iPad or directly from my iMac.
    My TV has 3 extra HDMI IN ports. But it has lousy sound (hence the sound system).
    I was thinking that the best solution would be to run an HDMI from AppleTV to my TV for video, and use an optical cable to run sound to my sound system. I just want to make sure that this will work, that AppleTV is smart enough to know that the HDMI is just for video and the optical is going to carry the audio stream.
    Alternatively, I was thinking that video would still go through the HDMI to my TV, but audio would go through Airplay through my Airport Express? I'm worried that there would be just enough of a delay between the video and sound through WiFi to put my video and audio out of sync.

    OM
    I have Apple TV with HDMI to my TV which I get video and sound via the TV.  I also have opical audio to the soundbar from Apple TV.  I can use just HDMI for video and sound through tv, HDMI for video (turn tv sound to 0) and soundbar for audio via optical audio or even just audio from the soundbar with TV off (need tv on to navigate frst!!).  Apple TV 2 with Samsung TV and soundbar all works great.
    So short anser, yes your idea should work, just the apple TV won't know the HDMI is just video, you have to turn the TV sound off yourself.!
    Jules

  • Late 2012 Mac mini i7 to run dual Dell UltraSharp U2412M WITHOUT using the reported HDMI out problem port?

    I've been reading about all the problems new Mac Mini users are having with trying to expand their desktop using the HDMI port.  ie: snowy screens, fuzzy text, blackouts etc etc.  My Mini is due to arrive in a couple days and I have two Dell UltraSharp U2412M LED/ISP monitors waiting for it.  I know one of them will work fine with a cord I already have: miniDisplay to Displayport.  Is there any way to daisy chain them if I run into this HDMI problem the others are having?  THANKS.
    The monitors have:  Displayport, DVI, VGA connections only. 

    Mine shipped Oct 30 and I've had it running since Nov 6th. I took the original 4GB RAM out and replaced it with 16GB RAM. I also put a Mercury Elite 240GB SSD into the top bay using a doubler kit from OWC. I had an issue with the Disk Utility not liking the setup as two seperate drives. I ended up using Internet Recovery Disk Utility and did a Repair Disk on both drives and  Disk Utility merged the drives into a Fusion Drive which was then properly recognized by DU. It all seems to work well, although I would have preferred seperate drives and more partitions, Fusion Drives are only allowed 1 additional partition, go figure. The HDMI has a bit of overscan with my 50" Panasonic Viera but the colors are good and the picture and fonts clear and distinct @ 1080p. I frequently use 720p for larger images so I can sit on the couch 15' away and read the text without binoculars.

  • Anyone have a problem with the HDMI port suddenly not recognizing any digital source imput signal?

    I have an HP 2711x monitor. 
    Anyone suddenly have a problem with it no longer recognizing any digital source input with the HDMI port (or DVI), yet the VGA port works fine?
    Thanks.

    Hello Largelee,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP 2711x Monitor not displaying HDMI or DVI inputs, yet it can display VGA inputs. Are these inputs all coming from the same device? Such as your computer? Does the computer's outputs show up on other devices via HDMI and DVI? If it works are you using the same cables? Are there any messages displayed on the monitors screen when you have the HDMI or DVI hooked up?
    Check to see if any of the documents below pertaining to the HP 2711x Monitor pertain to your issue:
    Flat Panel Monitor Displays Message about No Signal, Signal out of Range, Sleep, or Power Save
    'Input out of Range' Error After a Recovery or Upgrading to Windows 7
    Monitor is Blank
    Please respond with the answers to these questions so I can further assist you. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HDMI port not working on my 760GM Mainboard

    I think the problem is the PCI Express GeoForce 8400 Video Card is turning off my 760GM mainboard integrated HDMI port.  Is there a way to work around this or do I need to replace the card with one that had an HDMI port in it?

    >> Posting Guide <<
     If you have a separate video card installed you will not have any output from any onboard video ports. You can try a DVI/HDMI adapter or get a card that has HDMI port.

  • HDMI port not working on HPG62

    Hi, i have a problem with my hdmi port. I  plug my PC on my TV TCL, I share my screen by clicking F4 but nothing happed. I have no picture no sound. my  graphic card Ati  dosen't work for almost one year, it remains for me the intel graphic card what should i do ???? 

    Hi @Almsoussi ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion g6 Notebook  and connecting a monitor or TV with an HDMI Cord. The HDMI is just acting like a projector and should not make a difference which graphics card you are using.
    Here is a link to troubleshoot the connection with the monitor with the HDMI connection.
    Hope this helps you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HDMI Port not working on Lenovo G460 Win7-64bit

    I've been trying to solve this for some months now.
    I bought my lenovo G460 with nvidia M310 (with hdmi) this year and have not been able to get the hdmi port to work.
    I have two lcd displays one in our lab and another one at home (LG 2361V-PF) which have hdmi connections in the back.
    In the beginning I was able to get my notebook to work on the display in our office. However, now both displays (work+home) are not working.
    I have tried to reinstall latest nvidia drivers as of 2010-11-02 (ver. 8.16.11.8990) from lenovo, completely restore Operating system and tried different hdmi cables.
    I have even tried to use original drivers and also downgrade that to a lower version all with no luck.
    I have even taken my LG LCD display to the LG After Service Warranty office and have found no issues wrong with the Monitor itself.
    I am sure I have taken all the trouble-shooting methods into consideration so a simple question is...
    Is the hdmi port defective?
    I will take my laptop into the Lenovo After Care service center this week, but before then is there anyone who has had this issue and solved it?  -->or is it just a hardware problem easily fixed with warranty replacement parts.
    Thank you
    Solved!
    Go to Solution.

    ::Update:: ----------> Partially SOLVED
    Lenovo After Service Center Report:
       1. hdmi connection is fine
    They said that it could be a software problem and that they would try to update the driver.
    Partial Solution:
    Use Lenovo Original Drivers, for some reason NVIDIA newest drivers conflict with hdmi port on Lenovo G460 .
    I restored my laptop to factory condition and tested the hdmi connection and it worked for a few seconds ...
    my lcd screen started to flicker and my laptop flickers now when hdmi is connected....(A sign that hdmi is not really broken)
    Will update solution when i get it to work 100%

  • Macbook Pro 13 (June 2011) and Sony Bravia connectivity using HDMI port.

    Hi,
    I have searched many forums and posts here and there, but no where got the perfect solution, also most of the places people are misxing the problems with other problems.
    My Problem: I am not able to see even Sovy TV in my MBP display page, and hence not able to connect to Sony Bravia to my MBP.
    What I am using: Macbok pro 13 June 2011, Lion 10.7.2, Sony Bravia 40EX550, DVI Mini Adaptor for Mac (at one side DVI male connector and other side female HDMI connector) and one HDMI cable (the cable which comes with my DTH provider both ends are for Male HDMI pin)
    I do not think i would require anything more in this.
    Now after connecting with Adaptor to my MBP i connected the other end to HDMI cable which was already connected to HD TV HDMI port (there are 4 ports and i tried all the ports)
    When i opened the System Pref -> Displays I got below screen
    Here in above screen I clicked on Detect Displays but nothing happens, actually it should detect the Sony Tv and there on I sohuld do some settings.
    Please any one can help on that. Sorry for this repeated kind of problem , but I have searched in many forums and here on discussion.apple.com also , but evywhere people are mixing 2 different problem into one, some people are not getting the display and few of them not event getting the detection of the HDTV. So I posted here for the later one.

    Right now your MBP is not recognizing the TV.  You should get a display in SYSTEM PREFERENCES>DISPLAYS similar to this.  Note the 'Arrangement option in the menu bar.  Your connections are bad or you have a faulty cable and/or adapter.
    I assume you are using a MINI DISPLAY PORT/HDMI adapter, not a DVI adapter.
    Ciao.

  • How to connect apple tv when the hdmi port on my tv is connected to the hdmi modem

    I just got at&t uverse tv service.  The modem is connected to the hdmi port on my tv.  I bought a 4 in 1 out hdmi connector box, but don't know if this will work.  I've tried plugging the apple tv into one of the in ports, but I can't get it to work.  I've tried plugging both the modem and the tv into the out box and other components into the in ports, but it hasn't worked.
    Has anyone ever run into this problem where the tv hdmi port is used and apple tv requires an hdmi port?
    thanks,
    Joan

    I use this device as my 4 splitter and i get connection all devices working then after a few hours i get an error. can i get some direction on how to place each device on this one splitter? the Uverse box and TV only has one HDMI plugs, I put the TV HDMI from TV input to splitter Output, then I put Uverse cable in port 1 on the splitter, then appletv in port3.
    I need some direction if you can provide any.
    https://www.google.com/shopping/product/152784781184241298?espv=2&biw=1280&bih=9 39&output=search&q=rockefish+4+way+hdmi&oq=rockefish+4+way+hdmi&prds=paur:ClkAsK raX8Rp5ts3l9LicxkyVgxiMktOihntNJfwmB3JSZqvmy2QH7nuNb5nXfuEcJKpDd3zJb7pX-FiaKI91u my6-sMyrgCwzZXXyNMD1i-sv0FLb7uvtaHuRIZAFPVH71NyIbBbK6WBgme3K-dFAXePqzVZQ&ei=En34 VL2PG9fsoATe5IGICA&ved=0CPEDEKYrMAA

  • Mini display to hdmi adapter problem

    Hi,
    When I connected my mini display to hdmi adapter to hdmi, and hdmi cable to my ASUS PA238QR monitor, my early 2011 MBP 13" detects the monitor, but the monitor shows "hdmi no signal".
    I tried unplugging everything, including the adapter and hdmi, but to no avail. I tried putting my computer to sleep, and waking it up, still, nothing seemed to be the cause of the problem.
    I read through some old discussion on this issue, and nobody seems to have a solid solution besides purchasing another adapter.
    I tried booting into win7 and still, the monitor shows "hdmi no signal".
    I am 100% sure my monitor and hdmi works becuase when I used other laptops it's fine.
    Thus, I'm suspecting it's the mini display to hdmi adapter's problem.
    Is there a way I can make sure that my macbook pro is outputting the signal?
    Any recommendation or advises are welcomed. Thanks for reading.

    If you've an HDMI port on your television, you could always try that.
    I've used this adapter from Monoprice successfully - not bad for under $7.
    Give your TV a try - if no go, then you'll know that it's an adapter problem.
    Good luck,
    Clinton

  • Mini-HDMI Port: Video OK, sound only works for iTunes

    Let me start by saying, I'm pretty new to Mac so please be gentle with your answers...
    I just got a new HD Samsung TV and have connected it to my Macbook Pro through the Mini-HDMI port. There are two HDMI inputs on my TV, DVI and ARC. I'm using DVI. The video displays perfectly but I'm having a little trouble with sound.
    Once I went to system preferences and switched the audio output method to "SAMSUNG - HDMI" my iTunes music began playing through the TV speakers. I played a .wmv video from my hard drive; sound and audio all worked well. However, when I attempt to play anything through the Internet, Youtube, Hulu, Pandora, no sound... I still get video, and if I switch the Output source back to "Internal Speakers - Built-In" there's no problem. I don't know if it makes any difference, but I'm using Google Chrome as my Internet Browser.
    I've double/triple checked the sites to make sure the local audio levels aren't being muted, and that doesn't seem to be the case. Is there a setting somewhere that references only Internet, or more specifically, Google Chrome audio Output levels?
    PLEASE HELP...
    Thanks

    The "Front" channel isn't the same thing as the front panel. From the ALSA wiki:
    "Front, Surround, Center, LFE (subwoofer) and Side (these are the names of the channels with Intel HD Audio, they may vary with different hardware)."
    How many sounds cards do you have?
    [dspider@arch ~]$ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: NVidia [HDA NVidia], device 0: HDA Generic [HDA Generic]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    [dspider@arch ~]$
    What are the other HDMI devices? The video card?
    And have you tried googling the problem?
    http://ubuntuforums.org/showthread.php?t=1462288

  • I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.

    I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.
    To do this I will need a 2x1 HDMI splitter or a 2x1 HDMI auto switch (preferred).
    ?Is there any Apple TV HDMI port voltage?
    When using a HDMI auto switch to connect two devices to a HDMI TV, the
    Auto switch cable box only works for components that do not output continuous voltage over HDMI port when turned off.
    Do you know of any other solutions? Componets? Actual expierances?
    Full text below.
    Cable : HDMI switches expand the number of available HDMI ports on a high definition television allowing connection of cable boxes, Blu-ray players, and game consoles. A side benefit is that cable clutter is also eliminated by running a single HDMI cable to your HDTV from a switch and relocating the HDMI ports to a concealed location. The problem with most HDMI switches is that you have to either get up to push a button, or hunt for the remote control, to switch sources. The true mark of any great switching component is an ability to perform its function and remain transparent in its operation. This automatic HDMI switch is a plug-and-play away from offering everything you are looking for in an HDMI switch. Select a single output from up to three devices for signal delivery to your HDTV. Smart operation provides complete control for connect-and-forget operation. Powering on a device gives it output priority over the other devices. By powering down the device in use, output priority is returned to the last powered on device. Note: Auto switch function only works for components that do not output continuous voltage over HDMI port when turned off.
    Here is a typical HDMI 3-in 1-Out HDMI Auto Switch
    http://www.google.com/products/catalog?q=hdmi+auto+splitter&rls=com.microsoft:en -us&oe=UTF-8&startIndex=&startPage=1&rlz=1I7GGLF_en&um=1&ie=UTF-8&tbm=shop&cid=1 0340892278237558532&sa=X&ei=fTPmTtOiHuXq0gGc3sHfBQ&ved=0CHsQ8wIwAA#
    Thanks for any help. Sincerely,
    HDMI auto switch?

    Hi Erico,
    I tried what you said again but without success. I even updated the driver so that that audio driver is the same as the graphics driver i.e.. NVIDIA but this has not helped either:
    Do you have any other ideas?
    Many many thanks,
    Louise

  • How do i get the hdmi port to work with the tv?

    I bought an HDMI cable, plugged it into the computer & TV, set the TV to HDMI & the only thing that happene is my display on the laptop got large like it was in the safe mode. As soon as I unplugged the cable from the Laptop, the display on the laptop returned to normal.
    I have a HP Pavilion DV9235nr running Vista Premium 32 bit. I can't find anything that tells me how to use my HDMI port properly. Anyone got any ideas????
    coot99

    Hi,
    Before go further, please try this Fn+F4 (2 keys together). HDMI should pick up automatically but try Fn+F4 o see how we go.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for