HP G56 with Webcam doesnt work?
i have the g56 with a camera, ive used it to take pictures and go on video and what not and all of a sudden it says it cant find it? Help please!
Hello Mikeymans13,
I see that you are having problems with your webcam, is that correct?
I would like to help but I need some more information from you. What is the full model name and product number of the computer? Here is a link showing how to find it.
Here is a link to some troubleshooting steps for webcams on Windows 7 units
If you have a different operating system let me know.
Let me know if this works or if you have more questions.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Similar Messages
-
Satellite C850-A797 webcam doesnt work
I have Toshiba Satellite C850-A797 and my webcam doesnt work
I think it is because of Windows update and *the new software interrupt every time i download it,*
It is problem of the server of toshiba as i think
PLEASE HELP!!!!!!!!!Hi
Question 1)
What system do you have? As Im no mistaken the Satellite C850-A797 was preinstalled with Windows 7 64bit.
The webcam drivers as well as other drivers for Satellite C850 series can be downloaded here:
http://www.toshiba.eu/innovation/download_drivers_bios.jsp
I actually downloaded the webcam driver for the above page and it worked properly.
Check this [webcam driver v 2.0.3.39 for Windows 7 |http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7499&selSh ortMod=null&language=13&selOS=30&selType=315&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=315&page=1&ID=88046&OSI D=30&driverLanguage=42] -
Webcam doesnt work on my Satellite A300-243 with Win7 32bit
I have A300-243 PSAG8E, after installed win7 my webcam DONT WORK.
it had been worked before with VISTA AND spype.
I upgraded the bios and updated drivers.
Webcam is not listed driver of win7 32bits of A300.
As it suggested in one of the forums i downloaded other driver from A500/ A350 ect non of them worked.
displayed on the screen:
"Webcam is either disabled or has failed. Please check your webcam settings" also Camera is not listed in Device Manager." imaging not listed.
I restarted and used cccleaner after my attemps and nothing succeded.
What else I could do.
PLEASE HELP ME.
ORNAI have an A 300. I just fixed this problem by replacing the cable. It took me 3 hours to disassemble the laptop (clean it) and put it back together again. Now it works like New! The spare part number of the cable is V000932480.
In my case:
- camera stopped suddenly for no apparent reason.
- I didn't upgrade my OS or anything
- it beep every time I closed the screen
- It didn't show on device manager (only at 45dg position but I couldn't do anything anyway)
- camera software crashed every time, and said; Camera not found, restart or install.
In my opinion, after some time, the wire got damaged just by the hinge, although I couldn't see anything broken.
If you have the same issue and you are used to open the laptop then don't look on SW issues... just change the cable. If you are not sure then just buy an external web cam. it wont solve the problem but it would be much easier.
I hope it helps someone as other posts helped me. Good luck -
Command Link with Datatable doesnt work
I had read the previosu posts stating that commandLink with the datatable will be corrected with the new version of Jsf- 1_1_01 .I installed the new version and the commandLink doesnt work inside a datatable still
try initialising the List attached to the dataTable
in the constructor or use an outputLink
-DevioutputLink is similar to <href in jsp.It cannot implement the actionListener and action parameters which a commandLink does. Using a constructor for initializing is fine but when i want it to implement certain method then it creates a problem. -
I have E531 lenovo thinkopad.
My cam seems to be on when i check settings..
but it doesnt work on skyppe ?Hi SnowWolfX,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with camera on your ThinPad E531.
Have you check if the driver is installed properly from device manager, if installed check if it is enabled from setting.
Press Windows + C to enter the charms bar and go to PC setting select privacy and go to Web-camera option and check if it switches ON.
Check with this option and let us know the findings.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Marking words with cmd doesnt work
I wanted to highlight certain words in a line and make them big , therefore i tried to use the cmd button and stayed on it to mark more words ! but it doesnt work ? Any ideas ?
thanksWhat does it say just under the word Pages?
That is your version.
Pages '09 should still be in your Applications/iWork folder if you still want non-contiguous text selection along with the 90+ features Apple removed in Pages 5.
Rate/review Pages 5 in the App Store.
Peter -
Webcam doesnt work properly with Face Recognition tool
Hey guys, when I open my 'face recognition' tab and click register, that blue light will flash on and off all day, and never register/recognize me. Whats the deal?
Am I doing something wrong? If you need any more information let me know, and I'll gladly provide it.
By the way, the cam works fine, I use it on Skype all the time.
Thanks!Hi
Maybe you did something wrong while face tool registration:
Check this thread about face recognition
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35965
Start Toshiba Face recognition tool
Click on Register Face and follow the menu on the screen and register new account
Enter Settings and enable the option Automatic title selection. You can also choose first option in Authentication mode
Restart your notebook
When notebook restarts click on Switch user
Choose Start Face recognition
Here is another thread which provides the detailed instruction how to use this software:
http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=147434
check both!!! -
Satellite A210 - Built in webcam doesnt work
After i reinstall my notebook (Satellite A210) with the factory DVD, my webcam get this error... "Webcam driver open fail. Please restart camera or computer".
What can be wrong? I have this notebook only 1 month and I bought it as brand new notebook.It is very stupid situation. I have A200 with web cam and when OS installation is finished starts one small wizard and check if webcam is there or not. Hardware is recognised and all necessary drivers will be installed. After restart everything works well.
I presume the same should happen when you try to install your A210. Am I right? Try with recovery installation again. Maybe next time everything will be ok. -
I just updated my 3G ipod touch to ios 5.0.1 and lost volume control except when headphones are used, it will no longer work in my speaker dock, any suggestions?
- iOS 5 seems to have messed up connecting with Bose docks:
Re: iPhone 4 upgraded to iOS5, now Bose SoundDock not working
- Have you tried the standard fixes
--- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
--- Restore from backup
--- Restore to factory defaults/new iPod -
Assigned ringtones with image doesnt work together...
hello, could someone help on my new nokia 5800, while using the image (stored n tranferred frm pc by reducing the required size) I cant hear the spl ringtone assigned to the same contact. Though if i use nokia inbuilt images (came with the set) or dont use any image, I can hear the spl ringtone assigned to the contact as well as the image.
cheers!!
lalitProblem solved. I got my 5800xm six days ago and just figured the problem with my ring tones. Its very easy just go to your contacts and set the numbers as they appear when someone calls you I am from Trinidad but in my contacts I had the numbers starting with *31# and then the persons number because in Trinidad with bmobile if you block your phone's number from the settings you can just use *31# in front the persons number & it will show. My wife just called me and the ringtone played so I wondered how come so I checked the number & notice it was the same work # she called me from yesterday and I saved it not having time to put *31# in front of it .In my contacts I had the number but with *31# in front of it for eg I had in my contacts *31#7566766 the # I save was the same but it appeared on my phone as 8687566766 and thats how I solved the problem It's just your Country code in front the numbers in the contacts so now I put *31#8687566766 and it works with no problems (In Trinidad our country code is 868). Or if not just put the numbers you see when someone calls you its that easy.
-
I have ezonics Model P1-UC / Part 5302-0034 webcam it does not work. I tried iChatUSBCam software and SN9C102 WebCam Driver and maccam 0.9 software but no use.
I have ezonics Model P1-UC / Part 5302-0034 webcam it
does not work. I tried iChatUSBCam software and
SN9C102 WebCam Driver and maccam 0.9 software but no
use.
Then there may be no way to use it. Do you have a url reference for that particular product. -
Recording sound on my built in webcam doesnt work
I recently just got my hardrive upated and then i had to reinstall my camera assistant software. The first time i installed it the when i recording something it would have no sound. Then i uninstalled it and installed it a second time, now when i record the sound is all blurry and is coming out of one speaker only. I really need this to work cause i have to record my music, please help me!
Hi,
Please try this:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02452221&lc=en&cc=us&dlc=en
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
My logitech webcam doesnt work
i have downloaded the drivers for my webcam it recognises that its there but the web cam isnt on i have purchased 2 and both have same problem. Is ther anything i need to switch on or correct on my settings
Bruce, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them. Also, what is the model of the webcam.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Why defining Interface for singleton with getInstance() doesnt work?
Lets say I want to do the following:
package adapters
public interface IAdapter
function init():void
function getInstance():IAdapter
package adapters
public class DAAdapter extends EventDispatcher implements IAdapter
private static var _instance:DAAdapter;
public static function getInstance():IAdapter {
if(!_instance)
_instance = new DAAdapter();
return _instance;
function DAAdapter(target:IEventDispatcher=null)
super(target);
public function init() {}
I getting:
1044: Interface method getInstance in namespace adapters:IAdapter not implemented by class adapters:DAAdapter.
Why?In AS3 you cannot use interface definitions for static methods.
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/statements.html#static -
Compaq Presario Cq 60 116-ee Os-Xp Built In Webcam Mic doesnt work,,Please Help
Hi
I have a Compaq Presario Cq 60 116-ee Os-Xp
the mic on the webcam doesnt work
can anyone help me with the driver
I would appreciate the help
CiaoHow did you install xorg? What is your hardware? (lspci -vv) Please provide details.
Maybe you are looking for
-
I recently got a job that requires at least MacOS 10.7. I downloaded Mountain Lion but when I tried to install it, the message said it wouldn't work on mine. I can get a newer MacBook from a friend, that also needs the Mountain Lion update. Before sh
-
Unable to get an internet connection while tethered
I've updated my phone to 3.1, I've tried in Win7 and XP. I've removed the bluetooth memory of the iphone from the PC and vice versa multiple times, rebooted both, uninstalled the bluetooth drivers and reinstalled. No matter what I do, DHCP fails to a
-
How can i convert my invoice which is in smart forms to xml file
how can i convert my invoice which is in smart forms to xml file.
-
Where can I get a replacement Leopard disc to reinstall
Hello, I have a 2008 24"iMac, and I'd like to reset it to factory settings to give it away...where can I find this disc? I seem to have misplaced mine...thanks!
-
Does Webcenter Portal Require Its Own Weblogic Domain
Hello folks, I am trying to install webcenter portal in a HA configuration but I have noticed that whenver I try to run config.sh to extend the HA domain the program errors out with a message about invalid template "CFGFWK-64056 - There is a problem