HP g6-1202sa Notebook pc does not boot into Windows

I have a HP pavilion G6 that hangs when it gets past the Windows logo and ends up with a black screen and a live arrow cursor but nothing else happens. I have gone round and round looking at various ways of dealing with it but without success. These include various rescue/boot discs, then going into command prompt to carry out various system commands. These are best described in the article and related threads at the links below:- Re: HP G72-b66US Notebook PC Dosn't Boot into Windowshttp://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/HP-G72-b66US-Notebook-PC-Dosn-t-Boot-into-Windows/m-p/1336579#M22150 AndHow to Recover from an Infinitely Looping Startup Repair Loop without Reinstalling Windowshttp://www.sevenforums.com/tutorials/139576-startup-repair-infinite-loop-recovery.html Operations used include:-- use of Regback on DEFAULT, SAM, SECURITY, SOFTWARE and SYSTEM files- Bootrec.exebcdedit /export C:\BCD_Backupc:cd bootattrib bcd -s -h -rren c:\boot\bcd bcd.oldbootrec /RebuildBcdd
bootrec /fixmbrbootrec /fixboot Some other bits of information: - During the above operations I get the message 'Total identified Windows installations: 0'- I have copied most of the HDD to an external HDD using a SATA link and Testdisk I feel that the fault is probably a very simple fix (in the Boot directory?) but I have not found it yet.I would be grateful of your help please.Dave

my guess it's the hard drive did you ran the hard drive test as well?

Similar Messages

X102e - Hard drive does not boot into Windows

Hi, I was trying to reinstall Windows on my X120e.
I tried clean install with Windows 7 Professional, but the hard drive does not boot into the Windows once it has done the first phase of the install(you know, the copying part)
After the restart done by Windows, it goes as far as "Starting Windows" but does not actually boot into the Windows.
When I try to install Windows with another HDD, the device works well, but I can't swap the HDD because it is not 7.5mm think HDD.
Is there any possibility the HDD will work trough any software-level process? The HDD works fine as external HDD when tested with external HDD adapter, and installs well. only problem is that it fails to boot
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

Thank you for reply.
This is not exactly the issue. I was talking about the HDD originally installed in the PC.
The PC successfully recognizes the external disk I used to install the Windows, but the problem was that I did not boot into the "First boot" screen, which basically works on the already installed data.
As of now I have installed an SSD and is working fine. strange part is that HDD works just fine when I use it as an external HDD via adapter. Strange huh?
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

Satellite C50-A0113 does not boot into windows

Hello.
I own a toshiba satellite C50-A0113 laptop running windows 8 64bit.
Ive had it for exactly two years a few days ago i restarted it and then when it starts it stops at the "Toshiba leading innovation" screen and then it says scanning and repairing drive C while on that screen it starts the process and then stops at 34%.
that was two days ago now it just gets stuck on the "toshiba leading innovation screen " then after a few minutes it says preparing automatic repair.
It then leaves that screen and goes to a black screen for a few minutes then flashes the blue screen written "your computer encountered a problem" then restarts.
I tried creating a bootable windows 8 disc in order to repair but it doesnt even boot into the usb.
I restart and press f12 in order to select the media to boot into. It checks the media goes to the toshiba screen then just goes black for some minutes untill it restarts.
May i please know what is wrong and how can i possibly fix this because the problem is clearly not my hard drive.
I removed it and put into another laptop and it was fine

Dear aya11,
Defiantly it is a operating system issue.
did you check in the BIOS mode??
if your laptop is working fine in the BIOS mode then you have to reinstall operating system.
if you have preloaded operating system then you can recover your operating system.
recovery option is :*
if you are using window 7 in your laptop then,
just restart your laptop and hold the "0" numeric key..u get option HDD recovery just enter in HDD recovery
then it showing popup for format laptop just click on the yes ..you get a next option and your laptop is getting restart.
if you are using window 8 in your laptop then
just restart your laptop and hold the "F12" numeric key..you get option HDD recovery just enter in HDD recovery
then it showing popup for format laptop just click on the yes ..you get a next option and your laptop is getting restart.
in case both option is not working then u have install a new OS.
Thnx :)

Table does not fit into window.

Hi Guys,
When I execute the Smartforms I get this message ? '
"Table does not fit into window." any guess why this message ?
Regards

>
P R Raghu wrote:
> "Table does not fit into window." any guess why this message ?
> Regards
If TABLE does not fit WINDOW try to take it through the DOOR LOL
Doesn't the error seems self explanatory to you?
Regards
Karthik D

Error: Table TEMPLATE_HEADER does not fit into window.

Hello Experts ,
I met a very strange problem.
I am printing a process order using smartform.
for other process nrs , print perfect.
But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
At beginning , I suppose my table line extend the mainwindow width. But infact , no!
I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
so , does someone met this error before ?
Please help me!!
Regards
Kevin

Hi Kevin,
Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
Regards,
Aidan

Getting "Table %TEMPLATE does not fit into window" error

Hello,
I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
This only happens when I go to that printer. I can print fine to a laser printer.
I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
I have adjusted the size of the window that my template cannot allegedly fit into but still no luck. I have checked the height and width of the template and the window many, many times and still get the same error.
Has anyone seen this before? Please help. Thanks.

Hi James,
You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
What ever you create should be within this width and height .
So accordingly adjust the width and height of your windows and components within them
Regards,
Dep

HT4840 Boot camp does not boot to Windows 7 disk after completing disk partition - white blank screen

After completing the partitionning of the hard disk, the iMac reboots but nothing happens. The system does not boot from the Windows 7 disk.
A blank screen appears and that's all.
I have tried to manually boot from the disk by pressing the <Alt> kei will restarting the iMac. The system display the option of booting from the iMac hard disk or the Windows 7 disk. Seelcting the Windows 7 option does noting.
Thanks in helping me find a solution to my boot problem.
Danarc54

Are using a 64 bit version or a 32 bit version of Windows?
I'm not up on the iMacs but according to this article you may not be able to use 64bit Windows.

Machine will not boot into Windows!!

I formatted a 32 GB partition in NTFS, then successfully installed Windows XP Pro along with Leopard Bootcamp drivers. All was well. And then I tried to restart.
I held the "Option" key until the Mac OS and Windows drives showed. Selected the Windows drive and clicked on the arrow. Nothing happened except for the cursor freezing in position and the drive eventually spinning down. A light touch on the power button shut the machine down.
I have tried selecting the Windows drive as the default startup disc in System Preferences, no dice.
What have I done wrong? What can be done to repair the issue? I need help, wife about to start throwing stuff
All the best,
Chumpy

Odd thing I noticed. When installing the Windows XP Pro, new full installation disc, not repair disc, I had to shut down before installing the Leopard disc and loading Bootcamp and Leopard drivers because I ran out of time. The machine booted right into Windows the next time I tried. Then, after loading Bootcamp and drivers off Leopard disc the machine will not restart into Windows.
I have tried to do it by selecting it as the default drive and by pressing "Option" and selecting the Windows drive. Neither approach does anything. Literally. The optical drive and the harddrive eventually spin down and the machines white screen is frozen.
So, I have redone the partition in Bootcamp Assistant. When I try to boot to the installation disc now, it won't go. For some reason this is just not working at all.
Frustrated,
Chumpy

Satellite L300-135 not booting into windows!

bought it about 2 years ago everything worked perfectly until today where it's even unable to boot into windows vista...I just turn it on when the windows loading bar is loading then it shows blue screen for 0.1 sec and it resets itself... even the safe mode wouldn't start and restore mode (last good known config) couldn't help it to start...i tried using an ubuntu linux live cd to save my datas but couldn't boot either, gave an error stating something as abnormal.
so where's the problem ?
Windows boot manager tried to find the problem and is telling me this:
status: 0xc00000e9
info: An unexpected I/O error has occured.

> so where's the problem ?
Who knows??? Do you think its so easy to say whats exactly wrong without running any tests???
Maybe its just a software issue but a hardware issue (RAM, motherboard, etc..) can be possible too.
As I understood your message, you want to access the data and to backup the necessary files
Well, the Toshiba recovery disk would format the whole HDD therefore you should backup the data before usage of recovery disk.
You could remove the HDD from the notebook and could connect it to another computer using an external USB HDD case.
After backup, you could use the recovery disk to reinstall the Windows.

Win 7 Bootcamp does not boot beyond windows splash screen.

I am Running a Windows 7 bootcamp partition which has been running fine for months, untill today when it now just goes to a non responsive blank screen after the Windows splash screen. I am able to boot the win7 os into safe mode successfully, and also have the bootcamp partition set up as a VM, which i am able to boot into successfully in normal mode. Very odd.
I am running an 2.6GHz i7 Retina MBP with 8GB ram and a 512 SSD
Any help/ideas would be appreciated
Cheers
O.

Quote
Originally posted by Syruel
Thank you to everyone who helped me w/my prob. I got an Antec True Power 430--they didn\\\\\\\'t have any of the 550\\\\\\\'s in stock--and now my system is up and running.
Sadly, I still could NOT boot up the existing OS--I still had the same problems mentioned above--can anyone explain that?
But, I was able to install the OS on a blank HD, which worked just fine for some reason--I just have to reinstall everything now--any ideas as to that?
As for the manual and RAM...screw that...Quote
also do you mean 3 gigs of ram total when you say 3x1gig if so your board only supports 2 gig of ram when it is pc2700...
Yes, I mean 3 Gigs total. I read on Soyo\\\\\\\'s website that it\\\\\\\'s MoBo\\\\\\\'s do that and will only support 3 Gigs at 2100, hence me underclocking my RAM at 266 Mhz. It would have been really useful if MSI\\\\\\\'s documentation would have said the same thing. 3 Gigs at 2700 is the reason my system would NOT even POST. Where did you see that it only supports 2 Gigs at 2700?[/COLOR]
That's not unusual that you would have to do a fresh install of your OS to get it running properly. As far as RAM these boards are very sensitive to types of RAM so You may have trouble with your sticks. As far as 3 1 Gig sticks, unless you are doing some very heavy graphics it is probably overkill and you will find better performance with two sticks running in dual mode. Try it and see which way it runs better for you!
Rob

Dell Precision M6400 will not boot into Windows

I started up a computer we haven't used in a few months and received this message on a black screen. "Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH9M-E Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Steps already taken:
Booted into BIOS and ensured that the HD was selected as a boot device.
Took battery out and discharged power and then restarted
I am not sure what I can do next. But I've got a hunch that the HD has failed. But is there anyway to test that?
Thanks,
TR
This topic first appeared in the Spiceworks Community

I started up a computer we haven't used in a few months and received this message on a black screen. "Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH9M-E Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Steps already taken:
Booted into BIOS and ensured that the HD was selected as a boot device.
Took battery out and discharged power and then restarted
I am not sure what I can do next. But I've got a hunch that the HD has failed. But is there anyway to test that?
Thanks,
TR
This topic first appeared in the Spiceworks Community

MacBook Pro does not boot from Windows/Linux CD

Hello,
I tried to install bootcamp, but experienced the following problem: I was able to use the bootcamp wizard to create the partition I need. Then the wizard ask to put in the Windows CD and forced the restart. While booting I only see a grey screen, nothing happened after a long time.
I tried different Windows CDs from XP SP2/3 to Windows Vista and Windows 7, also for a test a linux and dos boot CD. Always the same issue, only a grey screen. Booting from Leopard DVD works fine.
I already reset NVRAM, PRAM, SMC.
I can use and install all such CDs in Parallels in OSX. As Parallels supports booting Bootcamp partition in OSX, I installed there Windows 7, but with the limitation that OSX protects changing the MBR, this change could not be done, but Parallels was able to store such information itself. So I can use Bootcamp in Parallels.
Then I tried to set boot partition to BOOTCAMP in preferences, but then I get the error "no boot partition is found, please insert CD" when MacBook tries to boot. Of course, the MBR could not be written to the partition from Parallels.
I checked if all software, EFI, Superdrive firmware is up to date - and it is.
I am using MacBook Pro3.1, 3 years old with 4 GB of memory and SSD disk from OCZ.
Can somebody help with this issue?
MrBass

This isn't a direct answer to your issue but have you considered installing Wine so you can run the occasional windows app directly in OSX? It's a much more elegant solution IMHO. This avoids restarting all the time with Bootcamp and avoids crashing all the time (and the security risks) with Windows running.

MacBook Pro will not boot into Windows 7.

I am sorry if this has been discussed before, but I could not find a correct answer. I recieved my 15" MacBook Pro last week, and I swapped out a few of the inside's for upgrades. I replaced the optical drive with a NewMode 2nd HDD Caddy, and a Hitachi 750 GB 7200RPM HDD. I also upgraded the RAM to 8GB. I bought the HDD so I could put Windows 7 on it. I went through the bootcamp process, partitioned 90 GB of my 2nd drive, and rebooted with my Windows 7 CD in my external CD drive. When it rebooted, it went to this black screen with a blinking cursor. I have tried many different ways to boot to the CD; like rEFIt and option key with no luck. It is not the disc because I have tried many bootable discs and none of them have worked.
Any help would be appreciated Thnx.

You cannot boot Windows from an external device. The Windows installer and Windows itself must be booted from an internal optical drive.
You can do some Google searching on how to create a bootable USB flash drive for installing Windows, but they all will require access to a Windows machine.
The new Boot Camp Assistant does provide an option for creating a bootable USB flash drive, but I don't know if it requires that the Windows installer DVD be in an internal optical drive.

Table TEMPL_FW6 does not fit into window.

Hello All,
My smartform driver program is giving me this error. What could be the problem .can anyone help me out in this.

Hii
this error u can get it in smartform itself
change the width of ur template & when u specifying the text check the line types
any of them ur missing
reward points if useful
regards
Jaipal

Does not boot only beep error code 4-3-4-3 Model: M55 MT-M 8810-W8T

Have a M55 MT-m 8810-W8T that does not display.
Power i suppose is OK as it powers up and give beep code of 4-3-4-3. From what I found it is a PHOENIX BIOS Q3.07 OR 4.X version. From searching I can only find that it means that "Boot code was read OK'. After the beep code I still have no display. Have tried on-board VGA (without the PCIe videocard). Tried the PCIe videocard, different memory, reset CMOS ......but still cannot get to the BIOS not boot into Windows.
So what does that exactly mean and how do I get the PC to boot up fully?
Thanks for any help in advance.

That usually means a memory error. Remove all of the memory and install one stick in the first slot. I have also overcome this error by "cleaning" the contacts of the memory module with the eraser of a pencil. Gently "scrub" the gold contacts at the botton of the DIMM, completely remove any residue and re-seat the module. It is possible you are mixing high and low density ram which could cause a situation like this.

HP g6-1202sa Notebook pc does not boot into Windows

Similar Messages

Maybe you are looking for