HP G60 lost audio function when upgraded to Windows 8.1 from the original Vista.

 Is there a Windows 8.1 driver that I can download to make the sound card work again? Please provide the source/link so I can download and install it. Thanks.

Riding wrote:
 Is there a Windows 8.1 driver that I can download to make the sound card work again? Please provide the source/link so I can download and install it. Thanks.
You could try the driver for windows 7 and check if it helps.
you can also try to update windows 8.1 as a new update may install the driver from Microsoft's driver library.
Windows7 Driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75899-2&cc=us&dlc=en&lc=en&...
I'm an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Click on Thumbs up if my post helped you.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

Similar Messages

  • I have Photoshop CS2 but I had to get my computer fixed which means I lost it..when I try to download it from the website it stops at 173of340...I have my original cd is there anyway I can use it and put in a different serial number

    I have Photoshop CS2 but my computer crashed on me which means I lost it..when I try to download it from adobe web site it stops at 173/340...is there anyway I can use my original CD and then  use a different serial number

    No, you have the web site version because this applies:
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    The rest we cannot know. You have not provided any system information or details like what browser you use, so nobody can help you with your technical issues.
    Mylenium

  • How do I output the smoothest video when changing or mixing frame rates from the original footage?

    I have been experimenting with various Media Encoder settings, and wondered if there was anything else I can try to get the smoothest video output possible, especially when changing frame rate and possibly resolution.  For clarification, let me start from the beginning and explain what I'm doing and what I've tried so far.  I'll try to be as brief as possible, but if I do go into too much detail, I apologize. 
    My original footage is AVCHD 1080p - 60fps.  (my camera only does 60fps...specifically 59.94fps)  We're not talking interlaced video here, I'm staying away from that.  This is definitely full frame, progressive video at 60 frames (not fields) per second.  My output will ultimately be for the web.  I have been keeping my output codec (H.264) and bit-rate (VBR 2-pass, relatively high-bitrate) consistent, and have been trying numerous output options and even sequence settings to see what would yield the best results.  I am using Premiere Pro CS5.5 along with Media Encoder.  Here's what I've done and the results I've observed:
    1.  I created a sequence with 1080p - 59.94fps settings to match my original footage.  I then output both 1080p and 720p versions at 59.94fps, and at 29.97fps.  The 59.94fps output files looked absolutely great, as would be expected.  Extremely smooth.  The 29.97fps output files were generally smooth, but not near as smooth as the 59.94fps.  This is expected since it's half the frame rate as my original footage.  However, my question is this:  What exactly is Media Encoder doing when "down converting" from 60p to 30p?  From a technical stand point, is it dropping every other frame?  I'm just curious to understand exactly what it does.  I tried the Frame Blending option as well, and that only yielded a bit more blur to the images which wasn't desirable for any of the output files. 
    2.  Just to see what would happen, I created a sequence with 1080p - 29.97 settings.  I then output both 1080p and 720p versions at 29.97fps.  The video was much more choppy in these cases, even with Frame Blending on.  Now, I know not matching my sequence settings with my original media isn't ideal, but I again just want to understand why this yields less smooth video than the 29.97fps options above.  Why does cutting the sequence settings frame rate in half from the original, then outputting the same frame rate as the sequence yield video that is not as smooth?
    3.  Next, I wanted to try mixing frame rates to see how Premiere and Media Encoder handled the footage and output files.  Premiere handled it great, no issues there.  However, I had some interesting things happen when I output the files.  Here's what I did:  I created a sequence with 1080p - 59.94fps to match my original footage.  Then I took the same exact footage that was in my sequence, copied it in my project panel and interpreted it at both 23.976 and 29.97 fps, yielding slow motion video.  The slow motion video looked great in Premiere, so I went ahead and just added it to my sequences, along with the original 59.94 footage.  I also created separate sequences for the 29.97 and 23.976 footage respectively, each with matching sequence settings, then added a nested sequence to another original footage sequence (with 59.94fps sequence settings) to see which yielded the best results.  Basically, I'm trying to output 59.94fps that match my original footage, but also throw in some slow motion footage at different framerates.  I'll explain my results in a moment as they are a bit convoluted, however, here is my question:  When mixing frame rates and trying to output the smoothest video, am I going about this the right way?  I would assume you would use your sequence settings that match the original footage (which is what the majority of the footage will be), then bring in a nested sequence for the slow motion (as oppose to just dropping the slow motion video directly into my main sequence), and then output to the same frame rate of the majority of the footage, in this case 59.94fps. Is there a better workflow for this?
    The results to #3 above were as follows.  Initially, it looked like it didn't matter if I nested the slow motion sequence into my main sequence, or simply dropped the actual slow motion video into my original 59.94fps sequence.  It seemed to produce smooth results either way.  Frame Blending blurred the video a bit, but didn't seem to make much difference, and quite honestly I like the footage without Frame Blending in general.  However, when I closed down Premiere, and opened the output files later (opening in Quicktime), the footage looked choppy.  In fact, it would go from choppy to smooth and back, almost like it had an irregular cadence (don't know if I'm using "cadence" in the right context here).  I would then open up Premiere again, import the output footage into my project panel, and play the footage in Premiere, and it would play back smooth again. Is this a Quicktime issue?  I was playing 1080p 59.94fps files when this happened, so maybe it's just because it's a large file.  Doesn't seem to have issues with the 720p files I created.  But it sure threw me off with my testing because I then started second guessing the settings I was using.  My iMac is the latest 2011 model with plenty of RAM, so I wouldn't think it's the computer.  Thoughts?
    4.  Next, I noticed on ALL my output files (again, using the H.264 codec from Media Encoder) that the color of my video seemed to flatten quite a bit.  It seems that the original footage has more contrast and saturation than the output files.  I figured maybe this was just how it was, but when I re-imported the output files back into Premiere, they looked IDENTICAL to the original footage.  And in Media Encoder's Source/Output windows, I don't see any difference there either. Is Quicktime again the culprit here, doing some odd things to the color of my videos?
    5.  Regarding Frame Blending, when is the best situation to enable this option in Media Encoder?  I've read it is when mixing frame rates, but I honestly didn't see too much of a change except for a bit more blur, which I didn't care for.
    6.  Lastly, my conclusion is that 60fps yields the smoothest video, which is an obvious conclusion.  However, I know that 60fps isn't the best or easiet frame rate for web delivery.  It seems 30p is more the standard.  Are there any integrated web players that would play 60fps?  Can you get 60fps video on YouTube/Vimeo?  If yes to any of these questions, can they do 720p and 1080p at 60fps? 
    Those are all my questions.  I hope I am clear enough without being overly wordy and hopefully I didn't put too many questions into one post.  Thanks in advance for any insight, I really appreciate it.

    Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
    thanks!

  • Lost my HP deskjet 3512 printer function when upgrading to Windows 8.1 - can't get it back!

    I lost my wireless connection from my Hp A6 Vision lapptop to my HP 3512 deskjet printer when I upgraded to Windows 8.1.  I'm told it is installed but it is not responding.  I'v tried following instructions and even using the Hp wizard to get it up and running.  Is it even compatible with 8.1?  What do I need to do? 

    Hi @periwinklejoy,
    Welcome to the HP Forums!
    I understand that you lost your wireless connection to your HP Deskjet 3512 after upgrading to Windows 8.1. I am happy to help!
    The printer is definitely compatible with Windows 8.1. As there are drivers available at this website, HP Deskjet 3510 e-All-in-One Printer Full Feature Software and Drivers.
    I would recommend the following:
    Uninstall the software. Uninstalling the Printer Software. (In case there are old drivers still installed, if not then carry on to the next step).
    Clean boot the computer. How to perform a clean boot in Windows.
    Re-install using the HP Printer Install Wizard for Windows.
    Then follow this guide, Installing the Printer Software for a Wireless Network Connection.
    Hope this helps you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I was not warned that audiobooks are a one time download only for those using iCloud to backup. As a result I've lost my audiobook when switching to a new iPhone after the previous phone was damaged. Will Apple refund me for the audio book?

    I was not warned that audiobooks are a one time download only for those using iCloud to backup. As a result I've lost my audiobook when switching to a new iPhone after the previous phone was damaged.
    Will Apple refund me for the audio book?
    the irony of this is that the lost audio books is Steve Jobs biography!
    Starting to wonder about the benefits of Android :-/

    If you haven't been keeping a backup of your downloads (none of your iTunes downloads are included in an iCloud backup, apps, music etc are only redownloadable whilst they remain in your country's store) then you can try contacting iTunes support and see if they will grant you a redownload : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • One finger scrolling lost when upgraded to windows 10

     Going back to Windows 7 was not a very viable option after using half of my monthly data quota to get upgraded to Windows 10. Using the old driver works better and I quit using Windows Explorer (Edge) and instead am using Google Chrome for my internet and the scrolling works well with it. Problem solved.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the Windows 10 update, and wanted to assist you! I recommend using the Go back to an earlier build option, in your System Settings:HP Notebook PCs - Upgrading to Windows 10 Once you are back to your original Operating System, check to see if you are experiencing the same issue.  If not, then you may consider holding off on the Windows 10 update for a few weeks, until drivers can be updated. Please let me know if this information was helpful by clicking the thumbs up below.
    Have a great day!

  • After upgrading to Mountain Lion, when I reply to an email from the Global Inbox it incorrectly selects the reply to address.

    Ok, since upgrading to Mountain Lion, when I reply to an email from the Global Inbox it incorrectly selects just my main business email account, even if the email was sent to a completely different persoanl address. This use to work without issue in Lion. I have at least a half dozen accounts that all come into the "Global Inbox" and I never worried about what account I was replying from as it always matched the account the email was originally sent to.
    Now in Mountain Lion, this is broken and no matter what email I select it defaults to my main account and I have to remember to manually select the proper reply address from the drop down menu. So far the only way to avoid this is the keep all the separate account Inboxes showing and then selecting the account that I want to view. Then when I repy it is to the correct address, but having to do this makes the "Global Inbox" view completely worthless! If I have to select teh correct Inbox to get the proper reply address every time then what is the point of having a Global View?
    Why did you break this Apple?

    Hello,
    When you compose a message right click on the attachement and choose "View as Icon".
    I know there was a Terminal command to set all attachements as icons by default but never tried it :
    - You can also use the Terminal (in your Applications folder > Utilities) quit Mail, and type in the Terminal :
    defaults write com.apple.mail DisableInlineAttachmentViewing -boolean yes
    - To restore the original settings type :
    defaults write com.apple.mail DisableInlineAttachmentViewing -boolean no
    (source)
    Hope this will help.

  • I have two iPods under same account information and lost one but when I try and track it only the one that isnt lost shows up, is there somewhere I can go to fix this?

    I have two iPods under same account information and lost one but when I go to track it only the one that isnt lost shows up, is there somewhere I can go to fix this?

    They cannot be tracked unless connected to WiFi.

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

    How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums.  Please help.

    You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
    If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

  • I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

    I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

    Try to disable hardware acceleration in Firefox.
    *Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

    Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

    I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
    But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
    How are you adding the files to Compressor?
    In FCP, what are your footage properties (command-9) and sequence settings (command-0)

  • What do I do with F-Secure Freedome when upgrading to Windows 10?

    QuestionWhat do I do with F-Secure Freedome when upgrading to Windows 10?
    AnswerWhen upgrading your operating system from Windows 7, 8, or 8.1 to Windows 10, you can choose to:
    Keep your programs and data through the Windows 10 upgrade (Recommended)
    If you choose to upgrade to Windows 10 whilst keeping your programs and data, the Freedome application does not get removed and continues to work normally after the upgrade.
    Make a fresh (clean) Windows 10 installation
    If you choose to make a fresh (clean) Windows 10 installation, you will need to reinstall Freedome after the Windows 10 upgrade. Do note that this method of upgrade requires you to type in a new subscription code as every installation of Freedome uses one of your available subscriptions.
    Note: If you have had an expired trial subscription of Freedome on your computer before the Windows upgrade, it will remain expired after Windows has been upgraded. This applies to both the Windows upgrade methods mentioned above.

    Thanks but the tool only works if you have one working windows installation and it's designed for mult-boot systems.  I don't have a multi-boot system and when the Windows 10 upgrade fails there is no active working Windows install to turn to. The partition gets corrupted and has a "RAW" status until you run chkdsk with gets it back to "NTFS" status but it won't boot.  My only two options at this point is to restore back to an image backup or install Windows 7 all over again. I'm just going to give up on this HP laptop, to me it's just not compatible with running this upgrade, so unless someone else has any other ideas this attempt to upgrade is over. Thanks again

  • I recently upgraded my 2007 vintage iMac from the Leapord OS to Mavericks. Now my system runs extremely slow when I start my apps. I only have 2G RAM. Do I need to install more RAM or is this something else?

    I recently upgraded my 2007 vintage iMac from its original Leapord OS to the new Mavericks OS and now its really running slow. I've run disk utilities to confirm everything is ok from the hard drive standpoint ... but am wondering if this is simply a memory issue. I only have 2G of DDR2 SDRAM installed. Is there a minimum recommended for the Mavericks OS?  Any other recommendations?  Time to launch any app has more than tripled from what it was before the OS upgrade.

    A combination of things:
    1. Slower CPU and GPU.
    2. Not enough RAM installed.
    3. Upgraded from Leopard.
    I would have backed up my files, erased the hard drive, then reinstalled Snow Leopard. Downloaded Mavericks and upgraded Snow Leopard directly. Then I would restore my files.
    Upgrade your RAM to at least 4 GBs if supported by your model.
    Backup your files, then do the following:
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Help Needed :- Upgrading to Windows 8.1 from Windows 8 on W540

    I have tried repeatidly to upgrade to Windows 81 from windows 8 and it fails I get the driver power state failure error and error codes 0xc1900101 0x40017 .
    After 4 failures , i deleted drivers for Prinfing (pdf / printer drivers etc )  and some others i didn't note tried to do the install and it worked, except the first time i rebooted after logging in , it would not boot into windows 8,1 driver it came up with the driver error messages again and i was given the option to reset to factory defaults and i did.
    After restoring to factory defaults i tried the upgrade and it failed again.
    So can you help me , in how do i upgrade to 8.1

    "I bought a ThinkCentre M83 which had a downgraded windows licence (windows 8.1 pro downgraded to windows 7 professional)." -
    "... Now you want to upgrade to Windows 8.1 that was originally offered when you purchased the computer.  The only way that I am aware of that would be possible is to purchase a retail version of the newer operating system. "
    I would say either you did not understand it well / or you gave the wrong info. If Lenovo Think(Pad/Centre) has Windows 7 Pro downgrade preload (but Win 8 / 8.1 Pro licence):
    - user gets media for Windows 8/8.1 Pro included with your Think(Pad/Centre) (I think until December)
    - or now you must order it here (free if entitled)
    Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

Maybe you are looking for