HP G62-220ca boot problem, wifi whitelist issue : ID du module WLAN (702)

Hi,
For no apparent reason 6 months after formating my Customer 's laptop his original wifi card is giving him an error code when he boots his laptop. Bios was already updated and all other parts have been tested fine. I just ordered and received another original wifi module and still giving that ''(702)'' error on system boot. Removing that part will allow the laptop to boot correctly, but a laptop w/o a wifi component is pretty much useless for him !
Laptop brand : HP
Model: G62-220CA
Actual BIOS vF.29
Any idea why/how that happened?
Thanks
Hellrik

Hey its me again,
So I guess no ones knows what to do or simply can't find any suitable solution. I just can't beleive I am the only one with this issue with this model....
This is sad.

Similar Messages

Boot Problems and memory issues on MSI k9a2 plat

I have problems booting after doing a bios flash. Gives me a error of bad checksum. Can't save any settings. I got to flash bios back to 112 so wanna know what is the CORRECT way to reboot/ clear cmos /or do i just restart.
Also my memory do not wanna run in dual channel. Will look for book of PSU to see ratings.
MODS sorry for going onto other people threads but thought due to me having same issues that it better to post there.

Read Moan Guide
You use Phenom CPU?(My guess according to my )
Read here: https://forum-en.msi.com/index.php?topic=113143.msg846972#msg846972

Is there a fix for the wifi connectivity issue after ios6 update?

Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Lenovo G580 wifi connection issue

Hi,
My lenovo g 580 laptop wifi connection issue ....wifi connected some place ......some place not connected show in limited
access...but in that place connecting some other laptop but my laptop not connected show in limited access....
please help out getting this problem before 1 months please slove this any can help me out.....
Moderator comment: New thread created. Subject edited for clarity. Was: Re: Lenovo G580 boot from DVD.

Hi
''also re-verified all the setting with the dealer from were the phone was purchased and he said the setting are all correct but still it failed to work...''
The dealer hasen't provided a warranty?Take it for a check up.Your warranty should cover this.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Quasi-boot problem with TI/Pwrbk

I 10.4.11 but not the most recent security updates and a 667Mhz Ti G4 Pwbk Onyx/DVI and new 40G hard drive that works fine also have with 512 SDRAM
Problem is that only sometimes, when I power-on I hear whirring etc...but never get a gray screen ergo no apple and no boot yet the machine is putting out plenty of heat lookinf for start-up disk
I've used the option key and that sometimes work but it same percentage of iffyness whether I use it or not and whether machine will boot or not.
I've read archives for this problem and have reset PRAM ---little button under right side of keyboard--- several times but problem always comes back after a couple of reboots.
Interesting that after I reset PRAM the first time i boot I hear the apple tone.
That is the only time I ever hear that tone on this machine, whether it goes ahead and boots fine or not.
Also get very infrequent kernal panics but the not booting or only booting after several retrys or reseting PRAM.
I guess its just and old machine not designed fro 10.4 and maybe it just needs a new battery --not PRAM batt--- as this one does not hold a charge for very long if at all, and maybe more RAM would make a differrence.
What can I expect from a machine this old for only $245? Problay not much more than I'm getting.
Still, considering how much it was new I like it.
Ran

Hi karbon, yeah its not pram battery and probably not anything to do with the main battery either, since hearing you have poor batt. also with no starting problems like i have, plus I'm now finding out my wifes new used, ibook 12" inch with a good batt. is also having similar starting black screen problem.
Yes I did install the HD myself, but computer runs fine and all is very stable, except for once in a month kernal panic. Not much of a problem.
Had only just bought the computer and it booted ok first and only time I tried it, so first thing I did was check HD with my OS 10.4 disc and found out the HD was going bad in red letters.
The OS I have installed is from the one of the original 10.4 releases and it was a 5-pak, altho the installation on my my Pwrbks new HD drive was about the 9th installation with that 5-pak.
I'm always amazed how I can keep doing installations beyond the 5-pak limit it was sold as.
THe HD has passed no problem and I'm the very conscientious type when it comes to repair permissions before and after any Apple updates and with most of my application installations.
I've had the computer for about a year now but the problem only began a few months back. For while usiing the option key when powering on would by-pass the problem but after while it didn't.
So, now I've come to discover, that it that after twto times of powering on an then off, it will boot ok on third time, tho currently it is powring on first time every time with no problem. :--)
Querky issue that I can live with.
My wife 12" ibook has a design flaw with the bluetooth/wifi card or at least its connector to mother board.
It has begun to also take three or four power ons before it will finally boot.
It has additional quek tho, where I will ask me to "mac-boot" and then I get the flashing "?" folder alternating with mac icon. So pwr off and it always boots find after this flashing episode.
We have left the wifi/bluetooth turned-off and will probably have the card removed and get a USB wifi.
Thx again for your supportive reply...
I wonder if it something with these older macs and the new updates that cause this problem?
Ran

1st series iMac G5: Booting problems, kernel panics, waking from sleep...

Specifications of the iMac described: 1.8 Ghz, 1GB, 80GB, 64 Mb Nvidia VRAM, Airport, 10.5.5
Back in August 2004 my dad bought us kids an iMac G5 for ‘family use’. It had a fresh install of 10.3.5 on it and compared to the (1999) iMac G3 it replaced it was amazingly fast.
The iMac never showed any signs of probable issues, until we decided to upgrade to Leopard in January 2008. Initially, this upgrade was only meant to be able to sync with the latest iPod nano (who demanded a newer version of iTunes).
After the installation the first thing I noticed was a high CPU usage, the machine seemed slower than ever and that with 1 Gb of RAM (the minimum sys. req. for Leopard are 512 Mb of RAM). Anyway, then the real thing started, it wouldn’t turn on anymore. We brought it to an Authorized Apple Reseller, the Tech department said the Logic board had failed. The costs of the fix weren’t the worth the computer anymore, so...end of story. The iMac was indeed one of the bad series, although it hadn’t any swollen capacitors.
My dad already made up his mind and bought himself a Macbook. He then told me that if I was able to get the broken iMac fixed, I could keep it. And so, I bought an ‘as-is’ logic board on Ebay. Last weekend I installed it, and it actually seemed to work! Yet, the problems are during the startup: the first thing I see is a screen full with horizontal lines flickering all the time, like an old TV with bad signal. Mostly it won’t boot and I get the message to restart the computer (kernel panic, I got dozens of logs already!). Sometimes it got stuck during booting (grey apple screen with gear in the middle) making the fans go crazy (after a while) and sounding what others describe as a ‘jetliner taking off’ sound. Sometimes the screen remains black. Generally it takes me 5 to 10 minutes to start up properly. Maybe it’s just me but it seems like when the computer has warmed up a little (by turning on and off on and on) starting up gets smoother. I mean the startup screen suffers from less horizontal flickering lines.
During the use of Leopard, I again get high CPU usage, especially when I use multiple programs at the same time, or when starting multiple programs. My iStat Pro said once that the fans were running at 4700 rpm and the heat of the CPU was about 70 Celsius. If I really want to **** my iMac off I should play a racing game. That just totally freaks him out! These problems could probably be solved by adding more RAM. Right?
The iMac also has a sleep problem. Sometimes after lets say an hour or so, you can’t get it out of sleep mode (by manipulating keyboard and/or mouse, the sleep light stops, but the screen stays off --> only solution is to restart). What happened to me once was that it slept so long that it just got into a deep sleep by turning itself off completely!
Here’s a list of what I tried so far:
- Disk Utility: Resetting the permissions, no problems were found.
- Resetting the SMU, both on the logic board itself as by pressing the power button 5 - 8 seconds, no improvements.
- Resetting the PRAM, no improvements.
- Did the Hardware test of the original install CD, nothing was found, all good.
- Did Archive and Instal, this actually messed my system entirely, cause it wouldn't boot at all and when starting up from the Leopard installation DVD it wouldn't recognize the Macintosh HD.
- Did Archive and Instal with the original disks, this disk did recognize Macintosh HD and so I installed the original system, 10.3. Booting problems and those flickering lines are still there though.
Next phase will be erase and install, but first I want to know what you guys think about all this.
Oh eh, One more thing; The guys at Applecare (phone support) told me that the replaced logic board was also out of warranty and so they couldn’t help me. But as the man on the phone was kind, he told me to go look for a special ‘driver’ on the net. He said that the driver should be able to resolve some of the issues described. He said that I had to give in the name of the LB on google and look for results. Is this bogus? Because I haven’t found anything useful on google so far. What’s the name (rather than a number) of the LB in the first place?
I hope you guys can give me some answers. I'm kinda desperate. But I still feel there's hope...

The symptoms of a flakey power supply are sleep problems and you have done all the right things as far as resetting the SMU and PRAM. Your CPU usage can be tracked by going to Utilities>Activity Monitor - look and see what is hogging the memory. The flickering lines could also be an optical system going south.
The other thing you can do is run DiskWarrior or TechToolPro to see if you have corrupted directories. Preferential Treatment will let you check for corrupted preferences.

MSI P45 Neo-f with intermittent boot problems

Current system:
*CPU: Intel core2duo 4300 1,80GHz
Mobo: MSI P45 Neo-F LGA775
*Memory: 1 Kingston 1GB PC2-5300 667MHz DDR2 and 1 Dane-Elec 1GB PC2-5300 667MHz DDR2
Videocard: Club3D Nvidia 8800GT 512MB GDDR3
*Hard drive: 120GB IBM deskstar 7200rpm Ultra-ATA/100 (yes I realize it is known as the deathstar, but it hasn't failed so far, I do back-up because I'm paranoid
PSU: Real Silent Nexus NX-5000 500 watt
*Soundcard: Soundblaster Audigy
OS: Windows XP home, service pack 2
*Lite-on IT dvd-rom drive
*floppy disk drive
I also have 3 case fans spinning away in a marginally large Chieftec Dragon tower.
The parts I marked with an asterisk (*) are parts that I removed from my old rig and re-used.
I'll try to give a clear rundown of my problem and the steps I've taken so far.
3 days ago I acquired the P45 Neo and installed it into my system, together with the 8800GT videocard. I was still using my old PSU, a Chieftec 360watt. This PSU served me well for 7 years, but it was starting to build up noise while trying to keep up games on my old rig.
I had some trouble getting the system to boot, I tried changing some of the 4 pins wires going to the hard drive and the dvd drive. I don't know if it was luck or if I managed to divide the load properly for the system to boot. But I succeeded into booting up, got into the bios and eventually installed WinXP.
As soon as it was time to install the videocard drivers, it stopped responding. I assumed it was a power issue, since I could only install the 20pin and 4pin cpu, but my Chieftec PSU didn't have a 24pin plug to the mobo - and it needed replacing anyway! So I bought a new 500watt PSU that had all the required plugs and more wattage.
I installed the new PSU, checked every connection and pressed the power button. 'Lo and behold, the computer starts up. I install the videocard drivers and it proceeds with no problems. I try to install the soundcard, but the cd says I don't have one installed. I fix that by going to the System list and install the drivers from there. I install a firewall. By then I have successfully rebooted the computer 3 or 4 times. I decide all is well and turn off the computer. But I realize I wanted to check up something on the internet.
I press the powerbutton. The PC power light go up for just a fraction of a second. I can see the blue LED of one of the case fans switching on just as briefly - then it goes out. The computer keeps trying to turn itself on. It looks like it's hickupping to try and boot!
I turn off the PSU power on the back-side because the computer keeps trying and wait for a bit. After 10 minutes, it still doesn't work. I leave the computer for a bit and return an hour later. The computer then starts up with no problems. I turn it off after a few hours, do a reset, start it up, no problems. But then the next day it happens again.
It's pretty tough figuring out what the problem is because it looks..almost random. I considered it could be a heat issue, but sometimes it *does* start up just after it's been turned down. Checking the bios shows no strange temperature shifts.
Hope anyone can help me, because I do not want to go back to my old Asrock mobo

While powered down I cleared the cmos data, removed the Dane Elec DDR2 module and set the bios to optimized defaults. Computer restarted to WinXP with no problems (it has been off the whole night). I shut down WinXP, wait a few moments and then turn the computer back on. Alas, it won't start and starts hick-upping. I turn power off at the PSU again, so it stops.
Now I try switching out the Kingston module instead. By now the computer has been off for 10 min (while I write this entry on laptop). I press the power button on the PSU and then the power button on the front. There is a short pause, lasting a second. The computer turns on, longer now, but it only lasts 2 whole seconds before it turns off again and goes on again (I believe now you can call it powercycling). It repeats this process until I shut off the PSU.
I check to see if I have installed it properly and try again but it starts powercycling again.
15 min pass, I put the Kingston module back in, press the power button and voila, this time it does start. WinXP shows up, no problems. I leave it on for a bit and then shut down. And when I press the power button again - the feeling of dread returns, when it starts hickupping again.
I'm going to see if I can install one of the memory modules from my housemate. Then hopefully tommorrow, I'm going to try if I can test a different PSU, since I see someone else on the forum - who recently posted, has the exact same power supply and also has boot problems, coincidence... or not ^^;.

Windows 8.1 pro boot problems

I upgraded my OS on a hp pavilion g6-1d73us from windows 7 home premium to windows 8.1 pro and ever since I have had boot problems. I took all the software off since I thought that might be the problem but the boot problems persist. The computer's self diagnosis helps but I still have problems. Is my laptop incompatible with windows 8.1? Windows 8.1 was a download and I still have recovery disks for windows 7. I originally thought the problem was incompatible software but now I am not sure.

Hi @hifive11 ,
Thank you for visiting the HP Support Forums and Welcome. I am glad you have recovery disks for windows 7, smart thinking. I have looked into your issue about your HP Pavilion g6-1d73us Notebook and having issues with the Windows upgrade to 8.1. Here is a link to the drivers page for your product. I do notice there are drivers for Windows 8.The Updates you need for the system are the Chipset. These are located on the driver page link above.
One of the things that can cause an issue is things connected USB. The computer can not load the drivers so it causes an issue. Once the machine is up to date then return the USB devices.
Then I recommended to restore the BIOS to factory defaults.Here is a link to restore the BIOS.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
Please note remove any and all USB devices. Disconnect all non-essential devices.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Wifi disconnect issue w new Mac

I bought a new Mac about a week ago. Right away I started experiencing wifi disconnect issues. I called customer support line and they had me reset the eprom. I don't recall the key sequence now. The problem went away for a week but has now returned. Is this a hardware quality issue?

right my friend, you know this is not an uncommon issue with mac, all my macs have the same issue (macbook, mac pro, mac mini and older imac), i disconnect the wifi and reconnect to sole the issue. it depends alot on what you have thats goign on around you, if there is a lot of wireless networks in your area then this might cause the issue. i improved this problem using a time machine and set the wireless to 5ghz only - it helped. i also bought an airport express to strengthen the network and touchwood this is a rare problem for me now!
try moving the modem around in case it this - ensure its not on the floor or touching the floor, there are many tips for improving modem connections look on youtube
however the sequence for this is on
http://support.apple.com/kb/HT1379

Satellite A660 - USB boot problems after BIOS update

Hello,
I own a Toshiba Satellite A660 and recently have update the BIOS to the latest version (1.80). Since then the notebook will freeze on the boot screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
It works without the flash memory connected and also if I connect it after I enter the boot menu or the BIOS setup. I can even boot from it like this.
As far as I am concerned this is a serious regression. Is there any way I can downgrade the BIOS version, or any other way to fix this issue ? I rely heavily on external USB drives.
Regards,
Claudiu.

I too am having problems with my A660 since upgrading to 1.80 bios - the HDD/SD utility, the pc health monitor and half the other toshiba utilities no longer work because they can't recognize the bios and actually tell me this... I get an error message telling me ''can't get bios type''...
On top of this I get the boot problem as well - I have to unplug half of my USB devices to get the laptop to boot properly...
And now - one month into owning my new A660 - after a hard drive failure, a problem with the Broadcom internal wireless adaptor I now have the internal TV tuner no longer working and have no idea how to fix it...
My gut feeling is that the sooner I can downgrade to the original factory bios the BETTER - and wait for another bios update to come along that is not faulty/buggy...
HOPE someone can help me with this...
John.

With new update 6.1.3 problem wifi connection each time to connect

Hi every one
i am facing new problem with update iOs 6.1.3 wifi conectivity problem already we are facing battery problem if we comapre with apple company standard.
each time when i try to connect my wifi in my home lawn IPHONE 5 giving wifi connectivity issue. i am very worry about this issue!
apple is the still fast and soft usage phone in the world as we compared with modern use.
i request to apple please try to slove battery and wifi connection issue to make iphone 5 much pretty by his hardware and software
Thanks
Muhammad Ali

Save battery
1. Lower brightness (Major)
2. Turn off WiFi when not using
3. Turn off 3G when not using
4. Turn off Bluetooth when not using
5. Minimize use of Location Service; you can turn it off for certain apps
6. Turn off push notification (Major)
7. Fetch new data less frequently or manually
8. Turn off push mail (Major)
9. Auto-check fewer mail account

Whitelist issues on host. My IP changes.

Whitelist issues on host. My IP changes.
I have a client app that can connect to the database I have on the host fine using jdbc, but I have to add my IP every time to the whitelist. My IP is not static.
What can on do on my site to eleviate that.
Can I add some file or script that does the call on the host with jdbc and just call that file from the application to stop remotly calling the query? Presently I call the JDBC query remotely.
String url = "jdbc:mysql://www.novajobseeker.com:3306/novajobs_customer";
Connection con = DriverManager.getConnection(url, "novajobs_user","xxxxxxx");I am thinking if I create some file on the host I can then make it.
String url = "jdbc:mysql://localhost:3306/novajobs_customer";
Connection con = DriverManager.getConnection(url, "novajobs_user","xxxxxxx");And there by riding my self of the whitelist issue I am having.
Any terms or words that someone can recommend please post so I can search. Or recommendations. Thanks
I cant figure out what it is I need to create script, servelet, etc. Whats it called.
*1) How do I call this file from remote application?*
*2) How do I send back the String Array "customer" back to remote app?*
//How do I call this from Remote application
package customerData;
import java.sql.*;
public class JDBCDemo {
    public static void main( String[] args ) {
         try {
        // Connect to the database
            String url = "jdbc:mysql://localhost:3306/novajobs_customer";
        Connection con = DriverManager.getConnection(url, "novajobs_user","xxxxxxx");
        // Execute the SQL statement
        Statement stmt = con.createStatement();
        ResultSet resultSet = stmt.executeQuery("SELECT * FROM CustomerInfo");
        //System.out.println("Got results!");
        // Loop thru all the rows
      while( resultSet.next() ) {
            String dataCN = resultSet.getString( "cusNum");
            String dataFN = resultSet.getString( "firstName");
            String dataLN = resultSet.getString( "lastName");
            String dataHN = resultSet.getString( "houseNum");
            String dataSN = resultSet.getString( "streetName");
            String dataCT = resultSet.getString( "city");
            String dataST = resultSet.getString( "state");
            String dataZC = resultSet.getString( "zipCode");
           String[] customer = {dataCN, dataFN, dataLN, dataHN, dataSN, dataCT, dataST, dataZC};
           //HOW do I send this back
           for(int i = 0; i<customer.length; i++){
                //System.out.println(customer);
stmt.close();
catch( Exception exp ) {
// System.out.println(exp.getMessage());
exp.printStackTrace();

shadow_coder wrote:
In regards to your second problem, I basically have the same issue and am currently waiting for help. Keep an eye on this thread for possible help:
[http://forums.sun.com/thread.jspa?threadID=5392794|http://forums.sun.com/thread.jspa?threadID=5392794]
Huh? That thread has absolutely nothing to do with this thread.

Can i replace a p320 cpu with a p360 in a g62-220ca notebook pc ???

can i replace a p320 cpu with a p360 in a g62-220ca notebook pc ???

Redkryptonite wrote:
can i replace a p320 cpu with a p360 in a g62-220ca notebook pc ???
Hi,
It's hard to say. This service guide says that the P360 supports only 1.2 models only. That is hard to guess which one it is..
http://h10032.www1.hp.com/ctg/Manual/c02641795.pdf
However, there are better processors so pick a better one instead..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

My wife has issues with her AOL email and was told to contact Apple about a virus scan. Has anyone else had a similar issue?

My wife has issues with her AOL email and a tech rep told her to contact Apple for a virus scan. Has anyone else had a problem like this?

You forgot to describe the 'issues' but there are no viruses that affect Apple OS X.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer some guidance on the main security threats and how to avoid them
Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
http://www.f-secure.com/weblog/archives/00002300.html
(I have ClamXav set to scan incoming emails, but nothing else.)

WiFI N issue on iphone 4

hello
Lost of persons have constated a Wifi connection issue with iDevice on WiFi N mode. This problem involve connection lost or data connection lost event if the iphone already have an ip adress. I've tried in my wifi router different channels, 40 mhz bandiwth mode, 20 bandwith mhz mode. Iphone wifi connection work sometimes but it's a weak connection (good signal, ip adress still connected but no data transit between). So i have to switch the iphone to air mode and back to normal to retrieve a wifi connection working for 10min.
I can't send music via airplay to my airport express too. Air port detected, but send no music on it. Disable WiFi N mode to G mode work perfectly with airplay on AE. Wifi data working a well without any issues. The problem seems last iphone/ipad ios, because lots of poeples have these problem in many different brand wifi router. Some guys said there was no problem on previous iOs version (4.3?).
Hope this bug will be fixed in iOS5 to improve WiFi 802.11 N mode.
Cheer
Thierry

HHi I had the same issue my husband went back to using his iPhone 4, I have the iPhone 5 and a iPad and mini. I couldn't set the wifi on his iPhon,
This is what I did and what my be the issue everyone is having. The iPhone 4 works with a 2.4 ghz radio frequency all the new products work with a 5 ghz. If you change the frequency in your router the IPhone 4 will pick up your wifi. the only problem is that once you change it all your other pproducts will not pick up the wifi connection. I'm going to continue to change the frequency until they all work, will keep you up dated.

HP G62-220ca boot problem, wifi whitelist issue : ID du module WLAN (702)

Similar Messages

Maybe you are looking for