HP G62-357CA Recovery Disk Error code OxeOef000e

I am trying to recover my HP notebook G62-357 and when I am on the second disk it is giving me the following error. Can anybody please help.
"Recovery Manager could not restore your computer using the factory image. Please contact HP Support.
Error code : OxeOef000"
I am using Windwos 7 operting system, and these recovery disk are the original ones came with the system, were never opened or used, so I do not think any issue with the CDs itself.
Just so you know I am out of the warranty, so can't call HP. Any help is appreciated.
Thanks
This question was solved.
View Solution.

Anytime!

Similar Messages

Unable to make recovery disk-Error code:020123

I just recently bought Satellite P755-S5265 and I am having trouble creating recovery discs.
When using the Recovery Media Creator program, I can create Discs 1 to 3, but am having trouble on disc 4.
About halfway during the downloading sequence this error pops up:
Failure to open file
D:\DATA.INI
(Error Code:020123-F1-0000000)
I have gone through several DVD-R discs each having the same error.
I've also tried using the Hard Disk Recovery utility to restore the computer to manufactory settings, but the same error pops up again.
Could someone please help me out?
I appreciate an help I can get.
Thank you in advance

If you're getting the error both when creating recovery media and when recovering the computer using the recovery partition, it sounds like there's a problem with the data on the recovery partition itself.
I'd contact support at (800) 457-7777.
- Peter

Unable to make recovery disk-Error code:020123-f10000000

Hi guys
please help if can?, i purchased the recovery disc for my tosibia qosmio dx730 -10p loaded new windows on all perfect and tried to make a copy of the back up media so i have extra copy incase other gets damaged its saying same thing when purchased this pc from new ,on first blank dvd r disc it gets half way and saids ,
Failed to open file
E;\boot\BCD
ERROR CODE 020123-F10000000
E drive is my dvd rw drive
i have intalled the new discs they sent me and still cant make a media back up .
Deborah
Solved!
Go to Solution.

Hi ! Iuse memorex DVD-R. What I would do is buy a usb and create your recovery on it. That is if your machine will boot to a USB. I have a 16GB USB with my recovery on it. It would be a lot easier to use it than all those discs You can check boot sequence to see if your machine will boot from USB
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Pavilion dv7-5003tx replace hdd recovery disks error code OxeOefoooe please help.

have tried both recoveries hangs at 45% and goes no where

Hi,
One factor that can cause this error is replacing the original HDD with a drive of smaller capacity - if this is the case, recovery discs almost always fail to work correctly, however there isAssuming this is an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp pavillion a000 recovery disk error.. where to go from here?

HI.. .fIRST Thank you so much for being here today...
I have an HP pavillion a000 which was bought used.
About a week ago I got pre-windows msgs. on the 3rd time it has frozen at this point
Msg as follows...
bla bla.. but windows did not start successfully..
a recent hardwared or software change may have caused this..
It has counted down and started in normal mode..
then it has frozen.. and I have tried to start it it all modes..
This last attempt actually started windows and went back to this screen
I put in the compaq recovery disk... I get red screen saying recovery disk error..
PLEASE Contact support
I have un plugged..re plugged and we go in circles...
I'm not sure where to go from here but any suggestions would be VERY appreciated as I do have some artwork I was doing stuck in computer now..
Do you think it's a software,, hardware or even a virus thing??
Additional info... Hp pavillion a000 system no.174A-ABA. hw bom 8121110 sw bom NA 40
serial no. mxk34916m
operating system.. Windows xp... yes I tried recovery disks I have.. puter says...non compatible..
I use firefox as browser via century link dsl..
I can pull the hard drive and I have a harness for accessing the hard drive directly via usb download if you think that's an option but not letting me into windows even has me doubtful that would work;;;
So as I mentioned.. ANY sugestions you can offer as what to try next would be MOST welcome!
I can replace the computer easy enough but I would love to be ables to rescue my art in progress at least!

Hello ValeryWildflowr,
If the computer was working fine before you might just want to try a system restore. This should correct the problem without affecting any of your files.
Here is a link for a system restore.
Let me know if this helps.

Phone stuck in recovery mode error code 40 and would not restore

My Iphone 3GS stuck in recovery mode error code 40 and would not restore.I was with AT & T.Please help!

Hi there...
Actually I was stuck with this situation yesterday. Here is what I did to overcome this issue: I hope it helps.
To start with, here are few things to you should make sure of:
1- You have the latest version of iTunes. You may try to uninstall and reinstall iTunes.
2-Restart your Windows.
If still no luck, try editing the Hosts file, here is how;
1- click on RUN then copy and paste the following:
notepad c:\windows\system32\drivers\etc\hosts
2- look for gs.apple.com
3- if there are numbers infront of it just delete them or just type # before the numbers.
4- Save the file and try restoring again.
Note: you should have administror access to edit the Hostes file.
put your iphone in DFU mode before restoring.
I hope this helps. It did for me

Recovery disc error code: 0xe0ef000e

Back in December I started getting warning messages about my SMART Drive failing and was told to create recovery disks for my Pavilion dv-7 Notebook, which I did. A few weeks ago the hard drive crashed and I replaced it. When I went to recovery page my disks did not work and I received the following error code: 0xe0ef000e. I looked on HP support website and saw where I could order new recovery disks which I attempted to do and they are not available. So I have a 2 year old $1000 laptop for which I just bought a new $100 hard drive and it's unuseable. Any suggestions on what to do next?

Hi,
There are a couple of options.
1. You could try the reliable 3rd party reseller Here.
2. Here's an alternative ( and cost free ) option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows 7 Images.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found by entering either your Model No. or Product No. Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows 8 Recovery failed; Error code: 0xc000000f

Hi,
I am having some trouble with my HP Envy m6 laptop.
I was using Windows 8 pro for almost a year without having any problem. After installing Win8.1 Pro, I had trouble booting and called in HP support and conducted a System Recovery. Everything was good but system was slower.
So, I backed up all data and then proceeded to do a Factory Reset (with HP Recovery Manager) with my HP Recovery DVDs which I have burned earlier. Everything seems to be working fine however the restoration failed (Incomplete restoration)! Tried couple of times but same problem.
While conducting some self-tests, 'Memory Test' (under Run-In Test) failed with "FAILURE ID: RGCD5F-6G56SV-XV7X0K-406803".
At the end, got following error:
"Recovery
Your PC needs to be repaired
A required device isn't connected or can't be accessed.
Error code: 0xc000000f
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacture."
I tried to reach HP Support since still have warrenty but unfortunately I just wasted my time talking to them. I purchased my laptop from Canada but currently living in Australia which made it really difficult to communicate with them.
Can anyone please give me some idea what I needed to do to resolve this issue? I went through several articles in here but failed to get the correct ones. Most of them are for Windows 7 and there are many differences in Windows 8!
I am urgently requesting some assistance from a HP expert who has experience dealing similar issues.
Thank you.
Best Regards,
Suranjit

The failure ID that you have provided for the memory test means that the Checksum has failed. This means that it is not finding a part that should be available, but is not showing. After taking a look into the issue of the memory test failing, the most likely cause of the failure is one memory modules has failed. I have included a link to another HP Forum thread here. Please follow the steps that DavidPK has outlined.
For the recovery error message that you are getting, this means that an integral component used during startup can not be found. This error should resolve itself once the memory Checksum error is resolved.
If your notebook has two memory modules, you should be able to boot from the one memory module until the other one is replaced.
Please let me know the outcome of the troubleshooting, thank you.
I worked on behalf of HP

RECOVERY LOOP: (Error Code:0xc0000185) PC doesn't load my operating system windows 8.

Hello,
About 3 weeks ago my just over a year new laptop took a fall onto the carpet from 4 feet above... my screen was cracked so I ordered a new one and put it in yesterday. Now, I am having problems. I start up my laptop, the HP logo with a timer circle is spinning below it, then it says " your Pc ran into a problem and needs to restart", it restarts and then it says, " Recovery- Your PC couldn't start properly. A required device isn't connected or can't be accessed. Error Code: 0xc0000185." With a bunch of other stuff written below it.. I have tried all the prompts possible. I did do a HP PC HARDWARE DIAGNOSTIC UEFI test, both the short and extended one. It says FAILED - Failure ID: GLXS3H-6MF76S-MFPWWJ-60S603, with the Product ID: C5E40UA#ABA then right below HARD DRIVE 1.
My lap top will not go into the windows screen now at all. I am guessing the fall my lap top took did some damage to the hard drive and that is the internal problem now. I did look at a video on how to take the hard drive out and I did unplug, remove battery, and take it out and took the controller board off, check to make sure nothing was lose or broken, and put back together and reinserted it into my laptop and I am still having the same loop as above happening.
INFO about my laptop:
-HP Pavilion G7-2247us Notebook 17.3"
-Windows 8
-750 GB Hard Drive
If you need any other information let me know and I will send it your way. I appreciate any help you give in advance.
Thank you,
Rachel H.
Washington State

Hello rh2014,
I have read your post on how you are not able to boot into Windows after replacing your notebook's display screen, and I would be happy to guide you towards a resolution!
Based on the information you have provided in your post, I recommend contacting our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Hard Disk Error Code 301

Can I replace/recover my hard drive after receiving error message "smart disk error 301"? I have a HP G72-253NR Notebook PC, product # LG583UA. I've received the error message and now when I turn on my system it will not boot up and will automatically go to startup repair. I then get the message that "A hard disk problem is preventing Windows from starting". This leads me to believe that my hard drive has completely failed. My notebook is no longer under warranty and I need a quick inexpensive fix. Please help.
This question was solved.
View Solution.

Hi,
The 301 Smart error would indicate the drive is failing and needs to be replaced - this is also consistent with the start-up error.
Your notebook is listed as coming with a 640Gb Hard Drive, but considering there's little or no difference in cost, you can just as easily install a 750Gb HDD if you want a bit more space - the drive on the following link is an example that would be fine for your notebook.
750Gb Hard Drive.
The procedure to replace the Hard Drive starts on Page 50 of your Maintenance & Service Guide.
Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive - this procedure is described in the HP document Here.
If you don't have your Recovery Discs, you can order a replacement set using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cant burn tunes to disk.Error code 4020

As of yesterday, I cant burn anymore songs to disks.I receive an error code 4020.It sounds like it is going to burn the songs but then after 2 minutes nothing happens and it aborts.Is it possible it is a problem with I-Tunes 7.1? Should I go back to an earlier version??

Microsoft Windows XP Professional Service Pack 2 (Build 2600)
HP Pavilion 061 RC647AA-ABA m7680n
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce 7300 LE
Connected Device Information:
DiskDrive, SAMSUNG SP2504C, Bus Type ATA, Bus Address [0,0]
DiskDrive, SAMSUNG SP2504C, Bus Type ATA, Bus Address [1,0]
DiskDrive, Generic USB CF Reader USB Device, Bus Type USB
DiskDrive, Generic USB MS Reader USB Device, Bus Type USB
DiskDrive, Generic USB SD Reader USB Device, Bus Type USB
DiskDrive, Generic USB SM Reader USB Device, Bus Type USB
CDROM, HL-DT-ST DVDRRW GSA-H30L, Bus Type ATAPI, Bus Address [2,0]
CDROM, SATA-DVD DROM6316, Bus Type ATAPI, Bus Address [3,0]
F: HL-DT-ST DVDRRW GSA-H30L, Rev S544
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 16 24 40.
The drive CDRW speeds are: 16.
The drive DVDR speeds are: 16.
The drive DVDRW speeds are: 16.
G: SATA-DVD DROM6316, Rev HP02
Drive is empty.
The last failed audio CD burn had error code 4020(0x00000fb4). It happened on drive F: HL-DT-ST DVDRRW GSA-H30L on CDR media at speed 40X.

Attempting to copy to the disk - error code -69

We have three iPods that we have to sync off the same computer. One is a 3rd Generation nano - 8GB. We are getting the message: attempting to copy to the disk "name" failed. An unknown error occurred (-69).
Any suggestions on how to resolve?

I get unknown error code (-69)
Does anyone else have this problem?
Does anyone have a solution to this unknown error code (-69)?

Recovery Manger Error Code FFFFFF 19 For Hp Pavilion g6

Recentlly I did a Factory Restore on my Hp Pavilion g6 but once trying to restore the files via the restore applaction on the usb I got the eorror code Recovery Manger Failed. Error Code = FFFFFF 19. I would just like to know what this means and if theres any way to recover the files I have saved on the usb now?

Hi @Adriana94 ,
I moved your topic here where you'll get more response from the forum feedback section!
Best,
Russ
I worked for HP.

HP G62-a20SA - hard disk error

Hi. I have HP G62-a20SA and every **bleep** time this piece of crap starts it shows hard disk error...
I removed toshiba had drive that was inside and replaced it with SSD (Kingston HyperX 3k 240GB) still have error! I tried replacing it with HDD (WD2500BEVT) and still have error! Those both drives are new and work fine. I don't see option in bios to disable this annoying diagnostic at startup... so what now? how can i get rid of annouying message at startup? I thought about updating bios but i already have newest version...
p.s. when i try to run hdd test it says hdd test failed 0303 on all drives
p.s.s. tried removing internal battery still nothing

tried flashing bios to these versions without any changes! still shows error:
F.23 A Current 09-2010 3.13M
F.08 A 07-2010 3.67M
F.04 A 05-2010 3.67M

Recovery Disk Error : cannot read from source file or disk HOW TO FIX ISSUE

I have had my satellite L655-S5096 for some time now.. I had to switch out hard-drives the other day and installed windows 7 home on it from my own disk. I tried to download all the drivers needed, but the graphics and wifi drivers never worked, so I pulled out the old toshiba disks to start from new with this harddrive.. It gets to asking me for the second disc, then the second disc gives me the the "cannot read from source file or disk PREINST8.SWM" This is from the "out of the box" setting, which is recommended. I do not know how to fix this issue besides reinstalling windows 7 from my disc and trying to get the drivers to work again.. however I shouldn't have to since I have the Toshiba recovery disks.. do I need new disks?
Yes, I also had the hard drive drivers and all of that installed.. my toshiba reads the HDD just fine.
~Drew

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

HP G62-357CA Recovery Disk Error code OxeOef000e

Similar Messages

Maybe you are looking for