HP G62-435DX BIOS chip

Hello,
Please advise where the BIOS chip is located on an HP G62-435DX?
Thanks

Hi,
2mb, what is it ? Please try the following link (Software and Drivers):
    http://support.hp.com/us-en/product/HP-G62-Notebook-PC-series/4346237/model/5051466/drivers
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Hp g62-435dx bios 2MB

    how to find internet hp g62-435dx 2mb  bios?

    Hi,
    2mb, what is it ? Please try the following link (Software and Drivers):
        http://support.hp.com/us-en/product/HP-G62-Notebook-PC-series/4346237/model/5051466/drivers
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need help reinstalling Windows 7 home premium on HP G62-435DX

    My internal hard disk crashed and I followed advice from this forum to use Ubuntu (using live disc from CD ROM drive) to recover data and save to external hard drive. Next, I replaced the internal hard drive with a 500GB internal hard drive. I figured out how to partition the new internal hard drive and get Ubuntu to acknowledge it.
    Now, I'm trying to figure out how to reinstall my Windows 7 Home Premium operating system so I can try to get back to normal. However, I cannot figure out how to download Windows 7 to my hard drive using my product key that came with my machine when I bought it. All the download options appear to require you to buy/request Windows 7 recovery discs to run and install on the machine (since I didn't create these prior to my hard disk failing).
    Is this really the only way I can use my product key to reinstall Windows 7 to my machine? Also, I cannot figure out how to download the OS from Windows 7 ISO downloads (via Digital River) to my internal hard drive - seems I can only do this by downloading and burning to CDs (which I don't believe I have the right kind - but obviously am happy to buy if it's the best/fastest option). It seems I have very limited options since I had to remove my internal hard drive, which then eliminated Windows 7 from my machine.
    Based on these details - I ultimately want to determine the fastest, most efficient way to get Windows 7 OS back on my machine. I'd prefer to download it, but am hamstrung by having to run Ubuntu from a Live CD. Thanks for your help!

    Here are the specs for your HP G62-435DX Notebook Computer. Here is the HP Software and Driver Downloads page if you wish to order the HP Recovery Discs and have them mailed to you. If you wish to download Windows 7 and use the Windows product key on the bottom of your computer, please see How to Install Windows 7 Without the Disc for instructions on downloading, creating the installation media (DVD or USB), and installing Windows. You will need a funtional computer with DVD burning software capable of burning the ISO to disc.
    Please send KUDOS
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Satellite Pro A200 (PSAE4E) - BIOS chip location

    Does anyone know the location of the BIOS chip on this Toshiba or have an image of something similar so I know what I am looking for? I have taken out the motherboard and despite a sticker that says ISKAA V1.20 BIOS, AAB4, U52 I cant find it (assuming U52 refers to the chip number).
    Dead laptop after a failed BIOS update so investigating getting another reprogrammed if I can find where the chip is.
    I didn't actually want to update the BIOS - I run the Toshiba BIOS util to see what version I had installed (I think every other BIOS util I have used allows you to see this info before doing anything) - the sire lists v5.6 for XP but v2.6 for Vista (haven't heard of different BIOSes for different OS's before. The Toshiba util went straight into programming - no info, no warning.
    It's not worth the cost to replace the mobo and environmentally I would prefer to at least try the chip replacement (perhaps if anyone from Toshiba is reading this and they would prefer that environmentally it would be better to try than chuck it away, then they might feel inclined to let me know where it is!)
    Any info gratefully received.
    Cheers
    Rob

    Well Paul at Grains sent me a new programmed BIOS next day and it all worked perfectly. Being only 8 pins witha decent soldering iron it wasn't hard, and you don't even have to remove the motherboard as you can get to the PCMCIA mechanism retaining screws via the second hard disk slot.
    So to recap if you have killed your BIOS:
    You can pay a Toshiba ASP 150+VAT for a new mobo, plus 90+VAT fitting, plus 30 P&P
    or
    Get a new BIOS from GRAINS for 14 total inc P&P
    He will fit for I think about 50 plus postage, but that is still a lot cheaper and it you are out of warranty a good option.
    Hope the info helps someone else.
    Rob

  • H-61MU-E35 (B3) 4MB BIOS Chip Vs 8MB BIOS BIN File - WinBond 25Q32BV

    Hello,
    I have MSI H-61MU-E35 (B3) motherboard with Ivy Bridge Processor, and everything was working fine,  Using Windows XP, I may have updated BIOS with different model no, so upon booting I was getting message that "BIOS File Not Found..."  In past, I had posted message in forum and got Big help but nothing worked nor message changed...
    So, finally I build Rayer's circuit to flash BIOS using SPIPGM Software utility. 
    Rayer's SPI Circuit and SPIPGM software is working fine. I am also able to write BIOS and retrieving it back and also comparing with what was actually written, and able to compare to make sure, its writing correctly.
    BIOS Chip Detected: Winbond 25Q32BV  (4MB)  Datasheet is Attached
    I also read Chip number visually, which is matching with what's detected by SPIPGM (Rayer's software)
    Product Page: us.msi.com/support/mb/H61MUE35_B3.html#down-bios
    Issue is:
    I have Ivy Bridge Processor and this motherboard supports Ivy Bridge Processor only with BIOS version12.x above.
    (1) All Ivy Bridge Supported BOIS BIN File size is 8 MB  and BIOS Chip size is 4 MB
    Question is: How it's possible to write 8MB BIN file with 4MB BIOS Chip ?
    There are 4MB size BIN File with older version, but that does not support Ivy Bridge Processor and with Ivy Bridge Processor in the socket, system will not boot to even say something.
    Using SPIPGM utility, when I tried to feed 8MB BIN file to BIOS chip, it's complaining me that, File Size does not match with BIOS Size...

    Hello SVet,
    THANK YOU !! THANK YOU !! THANK YOU !!!
    I downloaded your BIOS file using SPIPGM into Chip..... AND....
    After 6 month later... finally My dead board is live again and booted Windows XP as original....  Amazing....
    Agian... THANK YOU !! THANK YOU !! THANK YOU !!!

  • I need software bios full image to programmer bios chip for my labtop

    hallo i need bios software for programmer bios chip because my labtop does't work after up date bios
    I used the program bios, which is on the site, but it did not work for the piece I need a full copy of the bios to  programming on my own programming 
    The model number of the device dv6-7030ee 
    thank you

    abowdee wrote:
    Well I want a file bios so I can run the machine what is the solution, so I will not run the computer what is the solution when hp Company  
    plz help me
    thank you
    No one will give you that. You only can download to update the bios you will not get the source code and any bios you download and edit is use at your own risk. And since we have no P/N no one can direct you to the BIOS update your system needs. If HP support didn't give you this information why do you think the HP user are going to have access to that information.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Delta-L seems to be killing BIOS chips.

    Long post, but please read.
    I had (stiil have) a Delta-L, and it ran fine about a year or so.
    After this time, ramdom/massive lockups begun.
    After some time it died (in truth the bios chip got corrupted,and SURELY it was corrput, tried everything, even took out batteryfor a day, cleaned the entire mobo).
    So i bought a BIOS chip with 5.8 bios version in it.I placed it on the board and it revived.After a day or so it died again.
    Then I bought better PSU (its a Seventeam 420, I believe it's good PSU) to run my new mobo AN7.
    Now I got a bios chip (49lf020a 2Mbit) and hot-flashed it with 5.8 bios and  Uniflash said the process was
    succesful.
    So I put the in Delta-L (now using the new PSU) but it didn't come to life (shows Red-red-green-green or maybe green-green-red-red).
    But CPU is perfect as memory is (theyre the same ones I'm using in AN7).
    I believe that using bad PSU for about a year may have damaged something in the mobo.
    Now why I believe it's killing BIOS chips.
    After the Delta_L didn't came to life, I tried to reflash it with AN7, but now UNIFLASH shows red things in the progress bar.Looked like this http://img194.echo.cx/img194/9025/imagem8nr.jpg.
    I even tried another brand new chip and it seems to have been killed by the mobo again.
    The question is..
    What is probaly damaged in the mobo??? I want at least to try replacing it.
    Of course CPU (and heatsink) and memory was placed correctly.And I don't belive it's VGA related since the code taht d-bracket shows is the same even if I take CPU or memory or VGA out, or even take the BIOS chip out.No beeps at all, nor
    bootblock trying to access floppy.I tried it outside the case to prevent any shorts.
    I believe IT MUST BE something related to BIOS cause the first time it died replacing the chip for a brand new one (with 5.8) revived it, but only for a day (and the first time it died the code in d-bracket was the same as now).

    Quote from: Fredrik Åsenius on 15-May-05, 08:00:16
    There are no unused stand-offs left behind the mobo, or a wire poorly isolated, pulling power all the time.
    Is the memory well in place?
    You are not sure, but might this be the lamp post  you got:
    "4 BOTH BOTTOM RED
    Decompressing BIOS image to RAM for fast booting"
    "Now I got a bios chip (49lf020a 2Mbit) and hot-flashed it with 5.8 bios and Uniflash said the process was
    succesful. So I put the in Delta-L (now using the new PSU) but it didn't come to life (shows Red-red-green-green or maybe green-green-red-red)."
    I'm tired: How did you flash the BIOS chip if it wasn't on the Delta board? What good would that do?
    I tried reinsert memo lots of times, but It seems to have nothing  to do with memo, cause no matter if I take out memo, vga, or even CPU, the d-bracket always shows the same code and no beeps at all.
    And I hot-flashed the chip with my AN7.Quote from: Glenn on 15-May-05, 08:26:18
    Yep, board's probably fried.... Get an RMA
    Is it possible for me to RMA it since the store where I bought  only gave 1 year warranty?
    How can I test those little (some are about 0.08x0.03inches and some are bigger) components to check if they-re working? At least I would have some clue on how to fix this mobo.

  • Where is the bios chip located in the Equium A210-1C4?

    Have replacement bios chip for this model, but not sure where the bios chip is located on the motherboard?
    Any assistance appreciated.

    The BIOS chip is soldered onto the mainboard, you just can't replace it. It also needs to be programmed before usage using a special EPROM machine..

  • Where is a location of bios chip in HP G71-343US?

    Do you know where is the loction of BIOS chip on HP G71-343US? Can you help?

    Learn12 wrote:
    Do you know where is the loction of BIOS chip on HP G71-343US? Can you help?
    If your your thinking of messing with it doesn't matter if you find it you can't reset the password if you don't have the unlock code. And if this is a Business or Elite model that requires you contact HP support to send you a firmware to reset that password.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • How do I get MSI to Send a New BIOS Chip? (EOM)

    .

    Hi Curbstone -
    If you are in the United States, call their technical support number at (626) 581-3001.  You'll have the best luck if you get through to a live person.  My personal experience at getting a new BIOS chip out of their California Technical Support office was that voice mail messages left at technical support result in no response, e-mail message result in no response, faxed in problem report forms result in no response.  When the line was personally answered, I had a new BIOS chip in hand three business days later, free of charge.
    If you are elsewhere in the world, click on the Contact Us link at http://www.msi.com.tw .
    Another option is to link to http://www.badflash.com and request they send you a replacement BIOS chip.  Cost is US$20 plus shipping.  It may be necessary to e-mail them the BIOS you wish to have flashed.
    The following assumes that you have a K7N420 Pro board (you don't have a sig line to tell otherwise...):
    If you know someone with an EPROM burner (or are friendly with a local electronics or computer store that has one) you can download the BIOS image of your choice and have it burned onto a new chip.  The chip is either a Winbond 49F002UP12B or a SST 49LF020. The chip is a Plastic Leaded Chip Carrier (or PLCC) module. Shouldn't cost too much (maybe US$10 - 20).  You can pull the PLCC module from your board carefully using a small jewelers screwdriver or use a PLCC Chip Puller from Radio Shack - part # 276-2101 (about US$8.).
    Jef

  • K9AGM2-L - where's the BIOS chip ?

    I just bought a MSI K9AGM2-L. I can't find the BIOS chip of this mainboard . Could you help me find this BIOS  ? What kind of BIOS did MSI use ?

    Quote from: HenryW on 13-April-07, 15:37:11
    I'm not quite sure on that MB as I don't have a picture of it but on the boards I have seen it is near the lower left corner. It has an AMI BIOS so look for a chip that has somthing like that printed on i.t
    Picture of K9AGM2-L:
    I think it using a new BIOS chip, maybe FLASH chip.

  • Wind u160 Need to locate my bios chip

    HELP!!! So I purchased a new bios chip for my wind u160 but now I am staring at the mother board wondering where the hell I solder out the old and solder in the new. I have attached a photo of my board

    It's better to contact the service center and let them help with the work or PM those people who has experienced.

  • M-flash crashed my bios chip A on an MSI X79A-GD65 (8D) can i repair it?

    -m-flash crashed my bios chip A on an MSI X79A-GD65 (8D)
    -when i start the pc the motherboard and the coolers starts but my monitor is not turning on
    -the chip B is intact with the original bios version
    -can i repair somehow the chip A?

    Lauren open an own topic for your own issue following >>Posting Guide<< and giving details on your system and especially the board you have and we can tell you.
    TOPIC LOCKED

  • K7T 266 Pro2 - bad flash ,bios chip manufacturer wanted

    Hi, i've problem like many others, i've flashed my PRO2 Mother board with bios file of PRO2-A(the picture of PRO2 in msi site is bad, i've cooler on my northbridge and there isn't, but it's my mistake  ) now i want to reprogram it and i need know the name or type you know, of  that bios chip to reflash it with chip programer ,i can't see that name because after i unsticked the ami seal from chip, the text on chip have dissapeared  ,can somebody help me with this? The only which is possible to see is the manufacturer - maybe EON or smthng similarly i'm not sure,i need to know all that is on that chip, thanx for help saculcz

    Its probably just a bricked board. I suggest you phone your local PC shops and find out which one has a ISP programmer. That way they can flash the latest, or any BIOS version for that matter, onto the current BIOS chip, ensuite.  Here is an example of such a programmer http://www.xeltek.com/In-System-Programmers/SuperPro-IS01/
    Fry's Electronics in the US seems to be quite helpful from what I understand. That is of course if you are from the US.
    You can download the latest BIOS from the MSI site and take that along on a USB flash drive, and they will be able to flash it for you, at a fee of course, normally.
    Else you can search the web for companies that specialise in sending you ready flashed BIOS chips, which will of course cost money as well and means you have to solder it onto the board.
    Alternatively you can send the board to a MSI technical centre and they will also do the job.
    You will have to weigh up the costs and time effort and decide.

  • Bios chip for KT4V, 6712, V1.0

    Hello, does anyone know where i can buy a new bios chip for the 6712?? yesterday i killed my bios (did something wrong with flashing i think, but dunno what went wrong).

    thank you for the quick reply. i found someone in the Netherlands on that sit who can help me.

Maybe you are looking for

  • What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

    Hi, I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry docume

  • More Compressor 3.5 H.264 Issues

    Following on from this thread http://discussions.apple.com/thread.jspa?threadID=2109359&tstart=15 I also have compressor issues. All fine until the upgrade. I have seen the interlace issues mentioned in the thread, and concur that the quality of the

  • Single Blue Vertical Line

    Hi, My 92 day old iMac has just developed a thin (1 pixel wide I think) blue line about 3" from the left of the display. It comes and goes and crosses all windows. Has anyone else had a problem like this or have any ideas what's causing it? Cheers Al

  • MIRO: Need a BADI/EXIT to clear the Payment Block 'R' :

    Hi Experts, I am looking for a BADI/EXIT to clear the Payment Block that is put by the standard sap code through Perform zahlungssperre_setzen in include LMRMPF1R. I have tried to use BADI MRM_PAYMENT_TERMS but this badi gets called before the above

  • Log for Table changes

    Hi Experts, Is there any standard table in XI  that maintains the log  if I Changes some enttries in my custom table? Thanks Sugata B